HP Pavilion 500-319na: hp pavilion 500-319na

Similar Questions

• Turn on two HP Pavilion 500-319na DVI ports

  I just bought a HP Pavilion 500-319na which has been described as having 1 x HDMI, 2 x DVI video interfaces.

  The GeForce GT 705 nvidia graphics card has 1 x HDMI, 1 x DVI taken

  The motherboard has also 1 x taken DVI which was capped with a small piece of plastic with "do not remove" on the subject.

  After advice from PC World, I removed the plastic and tried the DVI socket mother who did not work.

  Is there a way of making the motherboard DVI to work in parallel with sockets of graphics cards.

  Finally, I would like to run two monitors from the DVI Sockets at the same time and have the HDMI enabled.

  This is my first Post ever anywhere so apologies if there is not enough information.

  See you soon

  RSPII

  Please provide the full brand and model, for both monitors information, you try to connect to your computer.

  Based on the specifications of your desktop HP Pavilion 500-319na, this model has a VGA port (analog only) integrated and an integrated port DVI - D (digital only) as shown below (please NOTE: embedded video is not available if a graphics card is installed);

  

  #4-VGA (analog only) # 5 - DVI - D (digital only)

  Please replace the plastic cover that you previously deleted. There is no way to activate the video ports built-in, although a discrete video card installed.

  NVIDIA GeForce GT 705
  DVI (dual-link) resolution: 2560 x 1600 x 32bpp at 60 Hz
  HDMI resolution: 1920 x 1080
  VGA (via dongle) analog resolution: 2048 x 1536 x 32bpp at 60 Hz
  Support of up to two displays at the same time.

  There are several ways to connect monitors to your computer, but you can use two ports on the NVIDIA GeForce GT 705. The discrete card supports DVI - D (and VGA via a dongle) and HDMI. HDMI signal is the same as DVI - D in this case.

  BETTER (recommended)

  Computer-> DVI - D cable-> monitor #1

  Computer-> HDMI to DVI - D cable-> Monitor #2

  GOOD

  Computer-> HDMI to DVI - D cable-> monitor #1

  Computer-> DVI-D/VGA dongle-> VGA cable-> Monitor #2

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Pavilion 500-319na: is it possible to run a NVIDIA GTX 750 Ti?

  I was wondering if my computer of 500-319na HP Pavilion could launch a NVIDIA GTX 750 Ti graphics card. It's because I'm not sure if my computer has the right amount of space to be able to fit inside or whether it would be able to manage the energy needs of 300W. My current graphics card is a NVIDIA GT 705.

  You are welcome.

  No, if the PSU is not powerful enough to run the card it does not work.  There will be no damage to the card or the power supply.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion 500-319NA: new to < see below > graphics card

  Hello

  I am new to the computer upgrades and know almost nothing about it, so please keep any simpler answer and understanding as possible.

  My computer is the "HP Pavilion 500-319na".

  It contains the graphics card "NVIDIA GeForce 705" (I think it's a 1 GB model)

  There's a game coming out next year called Overwatch, this graphics card is unable to play the game, so I decided that I want to upgrade this Christmas.

  The graphics card, I have drawn attention is the "ASUS 2 GB GeForce GTX 750 Ti.

  I have mainly two questions:

  • Is my computer compatible with this graphics card?
  • the Geforce 705 dosent require any kind of power, but one that I want (the GTX 750 it) seems to require a power adapter 6 pin or something.

  If anyone could help with any of these things it would be wonderful.

  Thank you, Callie

  You'll be glad you asked, you need to clarify some issues.

  This is your computer.  There really a 180W external PSU?  Or is the power supply inside the box?  There were some variations in generation of HP model #.   If internal, envy is the coast?

  Your computer has a 2.9 Ghz CPU... but Overwatch requires a 3.3 - 3, 46 Ghz CPU. That will slow down the game.

  GTX660 (140W) is far superior to the GTX750Ti (60W), but power is a problem. AQgain, need you a new power supply, but it's an internal model.  See above question. !!!

  You also have a problem of compatibility of the UEFI BIOS.  The GTX750Ti is OK, but the GTX 660 requires BIOS settings inherited.

• Pavilion 500-319na: network drivers

  I went on the site of hp for the network drivers, but when I entered the HP product says no driver available. Does anyone know of any other place that I can download drivers for this desktop computer?

  Thank you

  @Andy2008

  Drivers, User Guides and product specifications are down at the moment.

  Sorry for the inconvenience.

  REO

• Desktop HP Pavilion 500-319na: network driver problem: HP Pavilion 500-319na

  I got my system 8.1 of Windows to Windows 7 Professional 64-bit, all drivers install fine, but for the life of me I can't have the network to install so therefore cannot use internet, it's pretty frustrating for me because it's basically an overpriced paperweight without the ability of online, I can't get my updates or anything else and frankly I can't sell it If you can't find online so unless someone can help me to get the system up and running that I have a useless PC, too much room on my desk and a monthly fee in the sewers.

  Hello:

  These would be services ethernet and wireless drivers you need...

  This package contains the Realtek PCIe GBE Family Controller driver for the supported models running a supported operating system.

  File name: sp67085.exe

  This package contains the installation package driver for Qualcomm Atheros wireless LAN Controller in the supported models and operating systems.

  File name: sp69378.exe

• HP PAVILION 500-319NA: MCAFEE DIRECT SECURE 15 MONTH SUBSCRIPTION

  I JUST BOUGHT THE COMPUTER ABOVE AND I GOT IN THE CASE 15 MONTHS WITHOUT DANGER LIVE MCAFEE SUBSCRIPTION.  THE LINK I RECEIVED IN ONE E-MAIL FROM HP HAS SENT ME TO A WEB PAGE THAT DON'T ME NOT GIVE THE POSSIBILITY TO ENTER MY ACTIVATION CODE.

  WHEN I GO INTO THE INSTALLED MCAFEE ON MY COMPUTER IT ME GIVES JUST THE OPPORTUNITY TO PURCHASE A ONE YEAR SUBSCRIPTION AND IT DOES NOT RECOGNIZE THE ACTIVATION CODE WHEN I APPLY IT.  HOW CAN I ACTIVATE MY SUBSCRIPTION

  vespa1

  Welcome to the Community Forum of HP.

  No need to YELL.  The smile.

  Unfortunately, we can not help you with this issue in our Community Forum; you need to talk directly to HP.

  You might be able to get help from the Department Sales Post, would there be an option for this in the Menu (when you call); This is not a technical question, if you do not want to end up talking to a hardware technician.

  Contact telephone support HP - USA-

  List of

  HP technical support / Customer Service phone numbers - some English Speaking countries

  Guarantee required - us. and Canada

  USA - contact HP / / Self-Help-Email - Chat

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• 500-319na Pavilion: Hyper V

  I was wondering if someone may be able to answer a question for me.

  Do you know if this model is compatible with Hyper V and LATTE.

  I had a look in the BIOS and it seems that the BIOS is very old school.

  There is no option for virtualization, so I wonder if this is possible.

  Thank you

  Hello

  Type ESC after connection to get the boot menu. Once there press F10 to access the BIOS.  Go to the security topics and select the system security.  Now activate the virtualization and save the changes.  See the image below.

  

  You may also turn on Hyper V.

  

• Clubhouse second 500-319na hard drive

  I bought a HP Pavilion 500 - 319na Office in summer and you want to install a 2nd hard drive. There are alternatives to the Board connections and the power supply for the internal hard drive has a backup connection. From what I read, it must be SATA 3. I've read conflicting opinions on this forum.  Some say yes, some say no.

  OK, there seems to be only have a single Bay (a bad oversight by HP) but as I find a way to get another drive is there a reason why it shouldn't work.

  From what I've read there are 2 max by TB.

  I want a definitive answer please!

  8.1 64-bit win.

  It's the hard drive, which I intend to buy.  The specification says XP, Vista, Win 7, but do I with that reason to think it should work win 8.1

  http://www.PCWorld.co.UK/gbuk/components-upgrades/internal-hard-drives/3-5-inch-hard-drives/Toshiba-...

  Duplicate permutation.

• Pavilion 500-336: updated drivers audio HP Pavilion 500-336

  Here's the audio that I have on my computer: IDT 92HD65C

  Looking at the Device Manager, I see that the driver date is 07/11/2013.  Where can I find the updated drivers for this?

  The version of the driver I have right now is 6.10.6496.0

  Is there still a good reason do not update the audio drivers?

  Hello:

  The audio works fine now?

  If so, I would not update the driver.  Many problems with W10 and IDT audio.

  There is an audio driver IDT W10 on your PC support page if the Beats Audio doesn't work properly or not at all.

  6.10.6504.0 Rev.A

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-500-300-desktop-PC-series/6879020/model/7127002

• Pavilion c 500-467: windows server 2008 display driver

  I am running Windows Server 2008R2 64 bit on a pavilion with a HP2509m monitor 500-467c. Which shows the driver works with this combination of material? I see Windows 7, 8 and 10 64-bit on the driver list, but not Windows Server 2008.  Help please!

  Hello:

  You want to try the W7 64 bit drivers for 2008 Server R2.

  Try to install the drivers manually if automatic installation method does not work.

• Pavilion 500-246: GB of ram it shows only GB why usable?

  I have a Pavilion of 500-246 with 8 GB of ram it shows only 7.18 usable - PLEASE HELP.

  I also try to install a GeForce 8400 GS with 1024 MB ddr3 pci-e 2.0 and cannot operate. If I plug into the video card and that you start the computer NOTHING on the screen at all. S ' PLEASE HELP.

  Hello:

  The memory problem you reported is normal.

  Part of memory has been reserved for some devices of system such as the integrated graphics card.

  The issue of the video card does not...

  I see the product that your PC came with factory-installed W8.1.

  In order to get a video card no HP to work, you need to change 2 settings of the BIOS before installing your video on any PC card that came with W8 or newer version of the factory.

  See this link to change the BIOS settings.

  http://support.HP.com/us-en/document/c03653200/

  Also before you install your video card, you must uninstall the graphics card in Device Manager, check the box uninstall driver, stop, disconnect the PC and install your video card.

  You can do this after you change the BIOS settings.

• Pavilion 500 - 200 t: the proccessor upgrade

  I just upgraded memory of my desktop HP pavilion 500-200 t CTO at max (16 GB), I was wondering if I could upgrade my processor or is it 'fixed' to the motherboard?

  Hi @deerpark243,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have questions about upgrades of the processor. I'll be happy to help you.

  First the CPU and does not set on the motherboard.

  Please refer to the motherboard, (Memphis-S) sheet.

  To half way down you will see "information update processor.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP Pavilion 500-297c: Boot failure now need to recoversystem

  My Pavilion 500-297c will not start.   All initial tests HD pass ok.   I am running an extended test.   Resetting the system w/maintain files fails.

  I guess even a hard disk failure.   I purchase and install a new HD.  The system came with Windows 8, which has since been upgraded to Windows 10.

  So, I'm going to need some kind of bootable recovery disk HP.  No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Also, given that the current hard drive always seems to work at least in part, I hope to set it up as a second drive on the system once I get the new HD installed.  What is the best way to try that?

  > No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Because Windows 10 _was_ installed on your computer, a "fingerprint" of your computer is registered with Microsoft.

  This 'fingerprint' allows you to download Windows 10, on any computer and create a bootable DVD that can be used on your computer, without having to enter a 25-character license key.

  Reference: https://www.microsoft.com/en-us/software-download/windows10

  There is no need to wait for HP to courier-ship anything for you.

  Tip: buy a new disk drive and install, remove your current hard drive.

  Install Windows 10 on the new drive and then attach the old drive as a "slave."

  and copy all your files to it on the new drive.

• Pavilion 500-056: accidentally disabled my speakers! sound/no

  So here's the scoop. My computer (HP Pavilion 500-056) had been broken for a year now, and I finally fixed and reinstalled windows 10. Everything worked well and I was very happy until I realized that I had no sound coming out of my speakers. Through my process of DIY autour, check the cables and the entry and other output sockets, there seemed to be no problem. I went in the sound mixer, and there, I accidentally disabled my speakers, so they don't pop up on the list more! I have no idea how to turn them on now, and I still have no idea how fix my sound. If someone could help pronto, I would be very happy! Thank you!

  Hello

  If they were just disabled, you can re-enable the as follows.

  Do a right-click the speaker icon in the taskbar and select "playback devices".

  In the next window, right-click on an empty area and enter a checkmark against "Show disabled devices".

  If your speakers are now listed, right-click them, then select activate.

  Kind regards

  DP - K