HP Pavilion 6500: the password of admin HP Protectsmart

Hello

Seem to get myself locked out.

IM at the screen 'Enter administrator password or power on password'.

When I enter a password three times incorectly disable the system code is 91638363.

Any help would be appreciated.

Concerning

Advertisement

Hello

Enter: 24790965

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • HP Laserjet 200 color M251nw: I lost the password of admin for HP Laserjet 200 color M251nw

    I lost the password of admin and also deleted the printer on my PC.

    It is connected to the local network.

    Thank you for the help

    Waiting patiently

    AlhamduLellah 'Thank God', I had!

    Very simple.

    Visit this link

    https://www.YouTube.com/watch?v=UcNm9qyVdHc

    It's for

    How to reset HP LaserJet Pro 200 color MFP M276nw"

    but it worked for me!

  • computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

    computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

    Hello

    You should not have a password to reinstall Vista.

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    There are several methods to reinstall Vista.

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Where to check who has changed the password of Admin of HSS and what the new password

    Hello world

    I use Hyperion 11.1.2.1.

    Can you please tell what newspapers reveal that changed the password of Admin of HSS and what is the new password.

    Even though I know how to reset the password of admin HSS but for security reasons I want to know which user changed the password of HSS.

    -Sun

    If it was the default password admin account then it's probably the admin account that has changed, you can run reports to audit in Shared Services, but to be honest, they are pretty useless, in the HSS database there is a table named CSS_USERS and a column called updatedby which will show the user who has made changes to the account updatedtimestamp last and column to indicate when

    See you soon

    John

    http://John-Goodwin.blogspot.com/

  • Need a script to change the password of admin for all the VMs (windows)

    Need a script to change the password of admin for all the VMs (windows)

    Hi LucD,

    Need your help about changing the password to root for Linux VM.

    It throws the following error when I run on Linux VM

    Invoke VMScript: 10/04/2013-16:52:02 Invoke VMScript Could not authenticate with the guest operating system by using the supplied credentials.

    Thank you

    Suresh

  • How change/reset the passwords of admin of the auditor and Manager

    I have request Express the listener in a stand-alone installation on Oracle 11 g R2, how do I reset the passwords of Admin and feeder access the listenerAdmin.
    Listener already configured.

    Currently when I try to access apex/listenerAdmin I get requests for leave (by default / user/passwords username provided does not work).

    Thank you

    Hello

    "The xxxxx in XDB server requires username and password." (if I fill password user XDB) query appears:
    "The server at the APEX xxxxx requires username and password"

    It sounds like you still have active and configured listener APEX XDB HTTP Server to use the same TCP port. Unfortunately, the listener and Server HTTP XDB APEX use port 8080 by default. Configure a service to use a different port or disable XDB HTTP server completely, if you don't need otherwise, to resolve the conflict of port.
    To leave the APEX listener to use a different port, simply start with the apex.port parameter, for example

    java -jar -Dapex.port=8081 apex.war
    

    To change the port of XDBs, you need your user name sys (for example connection with sqlplus under sys as sysdba) and run the corresponding API command, for example

    sqlplus / as sysdba
    exec dbms_xdb.sethttpport(0);
    commit;
    

    where 0 is the value to disable the service completely. Use another port if you rather want to use it and don't want to not use APEX listens on a different port than 8080.

    -Udo

    Published by: Udo on 15.02.2012 15:38

  • How to change the password for "admin" on the installation of Oracle Hyperion 11.1.1.3

    Hello

    I have installation hyperion 11.1.1.3 made with almost all possible components (HSS, Essbase, planning, FDM, etc.) on Oracle 10 g under the RDBMS.
    Security is managed by SSP for all components.

    Please let me what is the way to change the password for "admin"? (What is as simple as changing shared services console and refresh)
    Ask you please suggest the steps involved.

    Thank you
    Ankit

    Hi Pierre,.

    This is exactly how to change the password admin. connection to shared services, change the password and updating of security planning and essbase.

    See you soon,.
    Mehmet

  • Try to set / change the password BIOS admin via the script WMI on ThinkStation D20

    Hello Lenovo Community!

    Start using the WMI Lenovo_SetBiosSetting class on a D20 system.

    If I understand the documentation that there is a limitation on the BIOS password in the past, but I updated to the latest BIOS Rev who support States was added for this feature.

    I use a script that changes the supervisor on computers password successfully thinkpad, but when even to run the script from command line on the D20 system it returns "SUCCESS" however to change the password did not effect!

    I'm using the right parameters are the standard of lenovo

    ' pap, oldpass newpass, ascii, we.

    I thought maybe "pap" is not the correct setting for password Admin on the D20, however the WMI available, posted 2010 guide, does not show otherwise.

    Someone at - it an example script that they can display successfully change the password on a D20 system?

    Please and thx!

    Did you run the SaveSetting script after changing the password?

    You can get the SaveSetting script from the sample scripts D20 located at the following link:

    http://support.Lenovo.com/en_US/downloads/detail.page?docid=UM002033

    You can use the script SetAdminPassword from the library of scripts of series E, then a follow-up that with something like what follows before restarting:

    "cscript SaveSetting.vbs" originalpwd, ascii, we.

    Replace 'originalpwd' with all what your existing password was at the time wherever you booted the system.

  • I forgot the password of admin, need help. (unique number)

    I have a problem with my computer. I have access to a guest account, but the account admin I need to access an administrator account on my computer, I have a guest account and I have access to cmd, but I cannto run administrative.

    I also use an ibuypower drilling rig. If the spamming f8 does not bring in safe mode. They have their own menu f11 but I don't know how to operate it.

    Can someone help me get into the hidden administrator account or recover the password of my account admin? Thank you.

    Hello

    "What to do if you forget your Windows password"

    http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

    "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    http://support.Microsoft.com/kb/189126/en-us

    Tools third password

    Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    See you soon.

  • I forgot the password of Admin of my Levono Ideapad (Windows 8): how to fix and upgrade to Windows 10?

    Dear friends,

    I forgot my Ideapad Lenono admin password and I can't upgrade to Windows 10 & impossible to install any application.

    Kindly guide me how to solve this problem. Can I perform a clean installation of the hard disk to fix this?

    I look forward to your comments.

    Concerning

    Puneet

    Puneet salvation,

    Yes, you should proceed with an own 8\10 install Windows directly too because according to the password of MS policy, they don't help you to recover the password.

    Please download the most recent ISO Windows 10 with the November update to make your existing windows key 8 to work. I can give you links if you wish.

    Hope that helps.

  • Error ORA-20001 while trying to reset the password of Admin 4.2 Apex

    Hello

    I had to reset my password admin apex and tried to launch as below mentioned the apxchpwd.sql script, but I got an ORA-20001.

    I checked in my console (OEM) the status of the user apex_040200 and status is expired, but not locked...

    Any idea of the reason for the error?

    This is the result I got while running the script:

    Connected to:

    Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

    With partitioning, OLAP, Data Mining and Real Application Testing options

    SQL > connect [email protected] as sysdba

    Enter password: *.

    Connected.

    SQL > @apxchpwd

    Syntax: SET SERVEROUTPUT {ON |} {OFF} [SIZE n]

    [[MAST] {WRA [DETERIORATED] |}] WOR [D_WRAPPED] | TRU [NCATED]}]

    Enter a lower value for the password for the user of the Application ADMIN Express.

    Enter a password for the user ADMIN [] *.

    Modified session.

    .. .the ADMIN password

    declare

    *

    ERROR on line 1:

    ORA-20001: password validation failure

    ORA-06512: at line 33 level

    Hello

    In fact, it seems to be a known issue with Apex 4.2.2 and there is a note in Metalink (support.oracle.com) on this subject:Doc ID 1579712.1

    Although it is not documented while the script asks you a new password, you must keep in mind the following:

    Password is not consistent with the rules of this site password complexity.
    * Password must contain at least one alphabetic character ().
    * Password must contain at least one punctuation character ().
    * Password must contain at least one uppercase alphabetic character.
    * Password must contain at least one alphabetic character tiny.

  • Freehand requires the password of Admin in OS 10.4

    I've recently updated for Mac OS 10.4.x. Now when I try to open FreehandMX 11.0.2 I get a dialog box asking my system admin password, after invites the password it just reappears again. Freehand is running OS 10.4.x?

    luxxter wrote:

    > I have recently updated for Mac OS 10.4.x. Now when I try to open FreehandMX 11.0.2
    > I get a dialog box asking my system admin password, after invites the
    > password it just reappears again.

    The patch can fix.

    http://www.Adobe.com/go/tn_18933

    Judy Arndt

  • How to change the password of admin BI Publisher

    Hello.
    How to change the BI Publisher admin password?

    Thanks in advance

    In the Security Configuration open BIPublisher Admin, in the Security Center, where you can manage privileges.

    But change the admin password depends on what model of security you use for BI Publisher.

    If you use the BI server like security model, then BIPUblisher Admin password is the same as Server(answers/dahsborads) BI.

    Give me more details if you are not clear, what your needs are and why you want to change the BI publisher password.

  • HP Deskjet 3545: How to reset the password of admin for HP Deskjet 3545. Cannot connect to the administrator settings page.

    I put a password for the printer. And whenever I try to open a session with him, he keeps asking the user name and password. So I want to reset the password or leave the field empty. Please help urgently.

    Hi @flame_ardor,

    Welcome to the Forums of HP Support! I understand you want to reset the password for your HP Deskjet Ink Advantage 3545.

    You should be able to do this by restoring the default network settings in the front panel of the DJ 3545:

    On the printer control panel, press the Wireless button. Wireless menu.

  • Pavilion: Enter the password administrator or power on password of the disabled system number 53352373

    Enter the password administrator or power on password of the disabled system number 53352373

    @wagidogg

    Enter 42030975

    Kind regards

    DP - K

Maybe you are looking for


HashFlare