HP Pavilion A6433W is blue screening?

need help


Reinstall the memory modules. If it does not help... Remove the module in connector DIMM that is furthest away from the CPU and try another reboot. If this is useful, then run memtest86 to know what stick went south.

Kind regards


Tags: HP Desktops

Similar Questions

  • Pavilion DV6 3055tx blue screen after RAM Upgraderei

    The product name and number: HP Pavilion dv6 3055tx


    Pre-installed RAM: 3 GB

    Operating system: Windows 7 Home Basic 64 Bit (90 days)


    Error message (if any): blue screen on startup of the BONE

    All changes to your system until the problem occurred: RAM upgrade


    In the title of the topic, include a brief and accurate description of the problem and your product information: I use this product for a long time... Good...


    One day, I thought to upgrade my RAM, so I ordered "CRS 4 GB LT_CMS04GX3M1A1600C11"


    Corsair 4 GB DDR3 RAM simplified eBay India


    After I received the product, I open the back panel and removed the 1 GB RAM Samsung and Corsair inserted one I ordered.


    After this, I restarted my system


    When starting Windows came to loading blue screen suddenly comes and laptop restarting


    Then a black screen comes with 1. Launch the tool to restart System 2. Start Windows normally


    I gave my chance for both, but the same blue screen.


    After that, I removed the two Rams and inserted as a single Corsair


    Same blue screen


    Then I open BIOS and it says 4096 MB installed memory


    After that, I inserted the 2 GB with it means Total two-channel 6 GB


    But again Blue Screen and BIOS saying 6144 MB


    What is the problem?


    Please help me solve the problem.


    The eBay seller is ready to replace the RAM, but I want to know if this could be a compatibility issue.


    Thank you... Waiting for a good answer


    I can't find any specs on that you bought it from memory.

    Your PC will run from 8 GB of memory, but you must be careful as to what memory you select.

    You must get the PC3-10600 (1333 MHz) memory and it must be of low density.

    You can't get PC3-10660 or PC3-10666 memory and cheap will be high density and will not work in any case in your laptop.

    You can see this related posts with someone who had the same problem, and when he bought the good memory, his problem was gone.


    I think you bought PC3-12800 memory and this is probably the high density - two bad things.

  • HP pavilion g6: password blue screen

    I have a hp pavilion g6 and my password blue screen or a power on password does not work. However, after three unsuccessful attempts, I get this code: 58829306. Pls I need help.


    Enter 47781928


  • HP Pavilion DM4 1160us - blue screen with rays of light from above

    HP Pavilion DM4 1160us running Windows 7 Home Edition

    I was logged off system and on the rear connection, slider received rotation that never finished, connect.  EU force power off.  (When you start the system, received option 1) attempt to recover or 2) start as usual (same results for both).  Seemed to start as normal - then a progress bar display "loading files" - followed by blue screen (and big arrow cursor) - quick flash of a (too fast to read) command window.  The hard drive activity light was on during a few seconds, the flicker for several times, then went.  Nothing would happen ever after that it and the blue screen remained.

    I also ran well to launch HD diagnostic tests - he failed the extended test.  I removed the original drive Toshiba MK5056GSY and replaced by a 32 GB drive my old Dell Inspiron came with, run installation of a new operating system and the HP boot works fine (less the HP drivers).

    I have not yet tested the "faulty" drive but will be when I get an external hard drive case.  It lasted exactly 3 years.

    I would replace the drive with a WD7500BPKT drive that is 750 GB.

    My question is ' the computer/motherboard/BIOS Board will manage the bigger drive?

    A 750 GB hard drive should work fine.

  • HP Pavilion dv6-1277el blue screen and disk hard error 303


    I have a HP Pavilion dv6-1277el with Windows 7 installed. For some time the laptop crashed several times with blue screens until one day windows no longer starts or is is stuck on the loading screen.

    I used an Ubuntu live CD to backup data to the HARD drive of the laptop on an external drive, but after that transfer a large amount of data that I received a warning ON impending drive failure due to reassign areas.

    Restarting the laptop I received the following message from the HP auto test:

    Hard drive 1 fast (303)
    Hard drive 1 full (305)

    The strange thing is that, after the first time that I had these messages, Windows rebooted to work without any problem and I've never had any blue screen again.

    What should I do? Anyway to change my HARD drive or her trust?

    Thank you

    Hello new solvayhütte.

    Probably, he continues to work because it detects a problem with the drive.  However, the reader may not be totally dead immediately.  So now is the time to get ALL the data that you want out of the disc before it goes bad.

    You have two options currently.  You can replace the drive hard yourself (it is not difficult) or contact HP for a repair.

    To replace the drive hard yourself, you can use your notebook PC Maintenance and Service Guide for instructions on disassembly of the laptop.  There are also specifications stating the hard drive inside your laptop.  Use this information to buy a new hard drive and compatiable.

    If you do not want to replace the drive yourself, you can contact HP and inquire about a repair.  If you are within the United States or the Canada you can call to the 1-800-474-6836.  However, if you are outside this area, you will need to go to the HP support site for the contact information for your region.

    I hope that this information has been useful.  Have a great day!

  • laptop HP pavilion 15-n236TU: blue screen

    Dear Sir.

    My pc restarts while working to im. Suddenly, a blue screen appears & says that your pc has run in to a problem he had to restart the pc. And futher said Driver IRQL not less or equal. (tcpip.sys). is very grateful for your kind attention.

    Thank you.

    Hi @kulasekara ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your issues of 15-n236tu HP Pavilion Notebook and to have with a BSOD IRQL Driver error NOT LESS or EQUAL of tcpip.sys on Windows 8.

    Usually BSOD, they are caused mainly by 3 antivirus firewall conflicts based on. Have you installed new software on the laptop?

    You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

    When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

    Please let me know how it goes.

    Thank you.

  • Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

    Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
    Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
    When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

    By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.
    Locale ID: 1033

    More information about the problem:
    BCCode: 1000007e
    BCP1: FFFFFFFFC0000005
    BCP2: FFFFF88006EFF443
    BCP3: FFFFF88003399D68
    BCP4: FFFFF880033995C0
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1

    Files helping to describe the problem:

    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

    If the online privacy statement is not available, please read our offline privacy statement:

    Can someone give me advice on how to solve and prevent this problem?

    Thank you

    you have the HP-tools installed?
    They often conflict with VMware.
    Try disabling the startup of the HP-tools

  • Pavilion dm4t laptop: Blue Screen of Death

    Error blue screen says that attempt to reset display drivers and recover from timeout failed. It is said to disable memory options such as caching or shadowing the BIOS.

    Occasionally, I get the blue screen when I try to open jpeg files that are on my hard drive.  This started to happen when I went bact to Windows 7 from Windows 10.  My external monitor did not work when it is connected to the USB port replicator docking station.  It is not recognized.  I have to connect it directly to the port on the computer.  I don't know that these questions are related.  I copied the text of the blue full screen if it would help.

    I reinstalled several system updates on the HP download site, but I still get the blue screen.

    I ran the Advanced HP System Diagnostics and passed all the tests.  However, I could not update the BIOS.  I have a BIOS date 21/01/2013 F.0C REV.

    When I restart the computer in normal mode of Windows everything works... for a while.

    Hello @Stuch,

    Welcome to the Forums of HP Support!

    I stumbled upon your post on the blue screen issue and wanted to help!

    For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:

    How can I find my model number or product number?

    In the meantime, please consult the following document and let me know how it goes:

    HP PC - error: display driver stopped responding and has recovered (Windows 10, 8, 7)

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • HP Pavilion dv7-2160ed - blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

    Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

    And I also noticed that some hardware is not installed to properliy:

    1 base system device:
    PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
    PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
    PCI\VEN_197B & DEV_2384 & CC_088000
    PCI\VEN_197B & DEV_2384 & CC_0880

    Device base system 2:
    PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
    PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
    PCI\VEN_197B & DEV_2382 & CC_088000
    PCI\VEN_197B & DEV_2382 & CC_0880

    3 base system device:
    PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
    PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
    PCI\VEN_197B & DEV_2383 & CC_088000
    PCI\VEN_197B & DEV_2383 & CC_0880

    unknown device 1
    * ENE0100

    unknown device 2
    * HPQ0004

    Can someone help me with this problem?

    Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.

  • HP Pavilion HPE-55sc - blue screen

    1. number and product name


    2 operating system installed

    Win 7 home premium 64-bit

    3. error message

    Problem signature:
      Problem Event Name:   BlueScreen
      OS Version:   6.1.7601.
      Locale ID:    1044
    Additional information about the problem:
      BCCode:   116
      BCP1: FFFFFA800AE230C0
      BCP2: FFFFF8800F405D34
      BCP3: 0000000000000000
      BCP4: 0000000000000002
      OS Version:   6_1_7601
      Service Pack: 1_0
      Product:  768_1
    Files that help describe problem:

    4. all changes made to your system until the problem occurred

    None. Shop Stright

    I would be happy if anyone knows.

    Thank you.


    Vilduha wrote:

    Thank you

    I bought it from a dealer called Siba (http://www.siba.no/) about 30 days ago.

    I tried HP Vision diagnostic material and ran a test full of memo, - all past.

    I tried to unplug the SATA cable smaller says BIOS on start up:

    Intel UMDI, PXE-2.1 (build 083)
    Copyright ~
    Patents ~ 
    Realtek PCIe Family Controller Series v2,38 (12/21/10)
    PXE-E61: Media test failrue, chech cable
    PCE-M8F: Exiting PXE BOM.
    ERROR: No boot disk has been detected or the disk has failed.

    Is it necessary to run the BIOS memo test when HP Vision Hardware diagnosis spent in memo?

    If yes how can I enter BIOS on the HP of the computer?

    Also have a problem with a driver, I don't know if this has something to do with the blue screen.

    Driver: IntelliPoint IntelliType NUID filter driver

    EDIT: The blue screen appears 3 - 4 times a week, not as part of any other thing, as from a game, watch the video...

    Thank you


    I, as a troubleshooting a week test, replace the keyboard and mouse wireless with a normal one usb port and remove the intellitype/intellipoint driver.

    It is often better to use a tool of bluescreen friendly user more like WhoCrashed? to analyze blue screens.

    Yes, I would still run the memory diagnostic. He has never hurt and it takes very little time.

    Best regards


  • HP pavilion d4790y displat a bands and error blue screen

    HP pavilion d4790y displat a scratches, then blue screen error "cannot reset the display driver and recover from timeout failed" running GEForce 7500LE w/tv, DVI output, VGA has my card that went wrong? only to start in safe mode under vista home premium CPU Intel Dou processor E6700 2.66 GHz SATA hard


    Try another monitor and cable on your PC in order to eliminate the PC as possible problem. You can also try your monitor and cable on another PC.

    Open your PC and see if the fan on the video card.  It can be full of dust.

    If the card turns out to be defective, must you output s-video port? If so, then look at this 9500 GT from NVIDIA.

  • Common blue screen of HP Pavilion dv6

    Hello dear friends Forum;

    I have a HP Pavilion dv6, with Windows 7 Home Premium 64 - bit service pack 1.

    "It produces a frequent (every 40 minutes or more) a blue screen with error message"igdpmd64.sys", PAGE_FAULT_IN_NONPAGED_AREA.

    How can it be resolved? I've restored earlist day restore showed me.

    Thank you for your support;


    Uninstall the update of Windows KB2670838

    How to remove an update

    Please post your result here in your thread.

  • HP Pavilion dm4-1024tx Enterta: upgrade to 8 GB of memory and is blue screen problem

    Product: HP Pavilion dm4-1024tx Entertainment Notebook PC
    Product number: XC651PA
    I have corsair Vengeance ram 8 GB (CMSX8GX3M1A1600C10) that as a result of the configurations as mentioned below:
    SPD 9-9-9-24 latency
    SPD speed 1333 Mhz
    SPD voltage 1.5V
    PC3-12800 (1600 MHz) memo speed
    Tested latency 10-10-10-27
    Tested 1600 Mhz speed
    Tested voltage 1.5V
    It passes the test of memory BIOS.
    BIOS VERSION: Hewlett-Packard F.27, 21/12/2011
    But when I boot windows 7, it shows the windows symbol and then it shows the blue screen with the error
    STOP: 0X0000007E
    If I replace memory corsair with the memory that has been delivered with the laptop the system only works very well.
    Corsair memory is not compatible with the system?
    I have a dual boot and installed ubuntu on this subject. Ubuntu loads perfectly fine, but after a while the system restarts automatically (IE open application).
    I tried memorytest86 to test the memory, but the application continue to crash and reboot and does not provide any results.
    Help, please.

    The RAM is not compatible. The system allows a maximum total memory of 8 GB and uses DDR3-1333 which downclocks at 1066 speed. You cannot use a single module of 8 GB. 4 gigs is the large single module supports the system. I suspect the memory that you have will work fine if you had modules of 2 x 4 GB instead of a single module of 8 GB. That's why memtest is not finished. The controller memory motherboard is not able to take up 8 GB of RAM by a single channel.

  • Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se

    I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.

    The verification of a KnownDLL failed.  process ended unexpectedly with system

    a status of 0 x 0000221 (0x007fb9c0 0x00000000).

    The system has been shut down.

    I don't have a recovery disc for this computer.  I tried to order them, but they seem to not be available.  It is my daughter's computer.  She said she started having problems after you download Frost Wire (music sharing), and then she took.  We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?

    Hi Yprlvr

    It is not possible to download records from the web site, but you can order and they will send you the discs for you.  If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).


  • Blue screen at startup windows 8 on attempt of fixing hp pavilion 15n invalid process

    Hi evrybody,

    I FAQ had this problem when I start my laptop (hp pavilion 15n021se) on the lock screen, when I click to enter my password, just after the cruser mouse movement I get the blue screen saying that the error "Invalid attempt to fixing the process.

    I searched this error and most of the results met my thoughts that the cause of this error is the touchpad driver.

    I installed the latest version of the driver (sp64225), and it is not suitable for my windows, so I want a previous version of the driver please

    and if there are possible causes other than the touch pad I'm enjoying mention of it and its solution

    Thank you & hoping to solve my problem

    Thank you for your kind help: super mario

    I actually use the usb mouse, that's why I thought the problem with touchpad driver, so I asked for a previous version of this device other than sp64225.

    So to make the touch pad, perfect work and prevent display of BSOD again once I already uninstalled the driver I downloaded from hp website (sp64225) and then I updated the driver from windows itself via the Device Manager and it worked perfctly.

    So the solution has worked with me is to uninstall the hp driver and update the Device Manager devices, & till now the BSOD doesn't apear

    Thanks again for your test from supermario

Maybe you are looking for