HP Pavilion a6838f: modem does not work

Similar Questions

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly.
  I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
  I mean that he can call on a mobile phone or phone of the Earth.

  A few times he suddnely connects but connected sppedis 24kpbs.

  But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Hello

  I don t think that the modem would be malfunctions.
  Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

  I recommend you configure the modem again.
  In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
  Delete the existing profile and create a new!

  Best regards and good luck

• Tecra M1 - Modem does not work (could not open a port)

  I have a problem: after you have reinstalled Windows XP and on my Tecra M1 drivers, modem does not work. It can not diagnose himself - he always comes a warning: "cannot open a port (COM). It can be used by another device or application. I installed the latest Toshiba drivers for the modem, but nothing changes. How can I solve this problem? Looking forward for your advice!
  Best regards.

  Hello

  Have you installed the drivers in the correct order? Not? So do it!
  Have you installed the software or additional devices which could have a bad influence on the modem?
  Check the status of the modem in Device Manager. You don't see any yellow exclamation?

  Try to start the test on the modem within the operating system.
  Check the operation of the Modem under
  Start-> Control Panel-> phone and Modem Options-> Modems tab-> properties-> Diagnostics
  by pressing the 'button interrogate Modem.

  If the information window about the Modem contains a list of COMMANDS (including ATI2, ATI3, ATI4 etc.), then the modem is installed correctly. The ATI5 command ends with the number for the parameters selected regional (for example Germany = 06).
  To change the regional setting please use the Toshiba Internal Modem region Select utility.

• HP Elitebook 8560p: Windows 10: Elitebook 8560p; WiFi button is not working, Wifi - and internal 3G modem does not work

  Mobile: HP Elitebook 8560p
  Bios: 68SCF worm. F.6.1
  Modem: AGERA Systems HDA Modem
  HP hs2340 HSPA + Mobile
  Network: Intel (R) (R) Centrino Advanced - N 6205
  Intel (R) 82579LM Gigabit Network Connection

  OS: Windows 10.0 (build 10240)

  I've updated HP Elitebook 8560p of Windows7 (64-bit) for Windows 10. The upgrade process was successful. Later, I noticed, Wifi and 3 G-internal modem does not work. Sametime, I noticed, that old HP Connection Manager has been uninstalled (or lost?).

  The problem is basically this: Wifi - and connections 3G internal modem does not work. I noticed, that wifi-button has "orange" color and the button does not work? I can't change the Wifi status parameters at the level of the OS of Off to On. That's why assume that the wifi module is on "off"-"State. I found the driver SP7107 (driver Wifi for Windows 10 button) package and I tried to install it. The installion failed because InstallDriver_64, location failed. (In Finnish language. Toiminto InstallDriver_64, may c:\...\WirelessbuttonDriver.inf' / installdrv/force). Is there an instruction manual to install the driver?

  I'm very confused and I don't know really, what is the first cause of the wifi - 3 g-modem internal questions and. I guess, this wifi button is not about root work.

  Can someone clarify why there are not more HP Connection Manager on Windows 10 and I tried to install, but install cancelled due to bad BONES. How can I manage wifi - and States of modem 3g without it?

  If anyone can help?

  A big thank you!

  Sip2sip

  Uninstall the access key and button wireless driver

  Reset

  Open Device Manager, run the dirver update

  shouldn't this go

  Download Connection Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66235.exe

  Install the program in Compatibility Mode in Windows 7

• The sound on my HP Pavilion G6-1a19wm does not work

  Hi the sound on my HP Pavilion G6-1a19wm does not work.   His "only" works when you use the audio plug with external speakers.   I tried to uninstall the driver, update the driver, microsoft fix - it and troubleshooting steps.  audio device present in the Device Manager and supposedly working properly, mute is "not"on."  visually everything audio related things suggest that the audio is fine and troubleshooting finds no problem... what else could it be?

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55036.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!

• My HP Pavilion g6 fan does not work.

  I bought a HP Pavilion g6 2230tx a few months back and its cooling fan has stopped working.
  It was working fine, but the problem started when I played Euro Truck Simulator 2 full settings. The cooling fan has been throwing a large amount of heat and the fan was moving quickly, but I continued to play. Later that day, when I turned on my laptop, it showed an error which was: "the system has detected that a cooling fan does not work correctly and continued operation can cause damage.
  Fan system (90 b)'.
  Then I turns off after 15 seconds.
  My laptop is under warranty until 2016-06-16 [YYYY-MM-DD] and the Security category is "guarantee of the factory." {Deleted personal information} & product number is C9L64PA #ACJ. Now my question is that how much HP will take to repair or replace my laptop fan. Will it be free? ;-)
  And I live in India.
  Thanks in advance
  Aniket Chauhan

  Dear Hüffer
  I tried what you say except clean it with compressed air and a paperclip. I'm going to send my laptop for repair and now I hope they'll work again.
  Concerning
  Aniket Chauhan

• Display driver and the modem does not work on Satellite Pro

  Hello

  My problem is that I format my laptop using the recovery disk cause him when I do using this disk, my laptop was not as good as before.

  So I formatted using a XP cd and then I downloaded the drivers from the Toshiba site but that of vga does not work and that for the modem also.

  Hello

  Are you sure that you downloaded the correct drivers? Why n t send you your description of laptop model?

• HP pavilion dv9925nr sound does not work help please

  Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic

  Hello:

  Then I recommend that you follow the instructions in the guide to the link I posted above.

  After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:

  Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )

  Pilot modded by silver here

  Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
  Not to connect, install from a list or specific location,
  Select don't search, I will choose the driver to install.
  For the hardware Type select 'show all devices '.
  Remove control "Show compatible hardware" and click on 'disk '.
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
  Ignore XP when he complains, Reboot.

  If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.

  Paul

• CM100 modem does not work with BELKIN router

  Hello

  I just bought a CM100 used on eBay, so I can get rid of my Charter rental, but it doesn't seem to work with my BELKIN router.

  The model number is BELKIN F5D7230-4. I tried everything, but the 'CONNECT' led will continue to Flash.

  I thought it was my mode, but when I bought a new LINKSYS WRT54G2 router, it works perfectly.

  Could someone help me please? If I can't use the BELKIN one, I'll keep the new router LINKSYS, suggestions?

  Thank you!

  (Mod Note: under the direction of compliance from the forums.)

  As CM100 works with the WRT router... This means that there is no problem with the CM100... If the Belkin router does not work then, you make the Belkin router settings. Your modem CM100 is absolutely perfect...

• Reinstalled vista now the modem does not work, says the modem is already in use. Modem does not appear in the material...

  Vista Basic with dial-up. I reinstalled vista and now the modem will not work with any of the numbers given by my provider. He throws error numbers (Sorry didn't write them) and said that the modem is already current usage or other computer is busy. The modem does not appear in the lists of material and reinstallation does not work. The computer does not recognize when a new modem is installed either. I use the same drivers provided with the computer when I got it.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

  It will be useful.

• Wireless modem does not work

  Whenever I try to connect to my wireless card, I end up with the same message every time and even when I try to connect it does not work.

  This is the message I get:

  Connecting through WAN Miniport (PPPOE)...

  Error 651: The Modem (or other connecting device) has reported an error.

  If you continue to receive error messages, you can enable logging for analysis.

  Enable logging
  For the logging options, see the diagnostics section

  Recording options are available by clicking the remote access preferences menu item in the Advanced menu of the network connection folder.

  No matter what I do, I can't connect wirelessly to the network. I have wireless to apple but the modem I bought recently is supposed to come with a Wi - Fi connection, but it doesn't seem to work. What is the card that I need to replace? Because I have the latest drivers for the system. I spent hours trying to get this card to work. Can anyone help?

  Have you checked the balls (or even activated recording) for any information that might help identify the problem - please do it and then post it here.

  It's really hard to tell if it is the card or the modem (or whatever) without these diagnostic information.  You have any other computer connected to the modem and do they work?  What is the manufacturer, brand and model of the modem AND the network adapter AND your computer?  What version of Vista are you using?  Do you know anyone with a wireless card, you can borrow to test to see if it works - then we will know it is the card or the network card settings or device, drivers firmware or software.  I re - download drivers, firmware and software for the modem and network card (by ensuring that they are applied to your version of Vista) and see if that helps.  Are you sure the card and the modem are both compatible with your version of Vista http://www.microsoft.com/windows/compatibility/windows-vista/ - please confirm that provided on-site or with manufacturers (or both).

  The modem is equipped with a Wi - Fi connection or you would not have got the error message you posted.

  You can also try to contact your ISP technical support group and see if they can help you set up the equipment.  There may be an incorrect setting that they will know how to set the right to use it on their network.  They can also help you set up and verify all settings as you go along to make sure everything is just right.  The word is mine frequently and almost always help me.

  I hope this helps.  I look forward to your reply with the results of what you tried and answered all of my questions above.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Pavilion DV6000 keyboard does not work

  I have a laptop HP Pavilion DV6000 Windows Vista.  The Windows form with password starts successfully.  But I can't enter my password - or other data from the keyboard, with the exceptions below:

  1. the lock shift key works.

  2. the SPACEBAR, backspace and delete all the keys work.

  I tried to do a hard reset, nothing helps.

  Any suggestions?

  EV Anderson, Tallahassee

  Hello

  (1) once the unit is on keep tap the F8 key, select the last good known configuration & check if Unit works very well.

  (2) you can also try F10 key try to do a Bios default.

  (3) once the unit is power on keep touching the use key F8, and then select Safe mode with command prompt type keys and check if the keys does not work, you may need to replace the keyboard because it is a hardware failure.

• Laptop HP Pavilion TS15 touchscreen does not work

  My HP Pavilion TS15 mousepad Notebooks did not work, so I changed some settings, but now my touch screen does not work. Help, please.

  Original title: touch screen of my HP Pavilion TS15 Notebook PC does not work

  Hello

  Did you the latest changes on the computer before this problem?

  I suggest to follow the steps mentioned in the article.

  Troubleshooting of touch screen in Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c03488148&LC=en&JumpID=reg_r1002_usen_c-001_title_r0007

  Additional information:

  Touchscreen and stylus parameters: FAQ
  http://Windows.Microsoft.com/en-in/Windows-8/touch-pen-settings-frequently-asked-questions

  Contact: call, tap and beyond
  http://Windows.Microsoft.com/en-in/Windows-8/touch-swipe-tap-beyond

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.