HP Pavilion all-in-one desktop computer: computer turns on the screen then black

Hi I turned on my computer about a week ago, that the hp logo appeared on the screen and then the screen went black just for 10 sec, that this is an error with numbers does not remember is their exact number given that on that day there, he made the same thing hp logo then black screen only the error did not appear again please help :-/

I finally fixed it yay thanks to the very helpful advice here so relieved now :-D

Tags: HP Desktops

Similar Questions

  • print allignment page all-in-one HP PSC 2400 turns off the printer features

    After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

    After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

    Hello

    You can get a faster solution on the Support Forums of HP printer.

    Here is a link for your convenience.

    Printers and all-in-one - HP Support Forum's:
    http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

    Select the appropriate forum for your device.

    Concerning

  • HELP computer HPg61 turns on, the screen remains black

    I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

    -HP g61 laptop

    -Windows 7 home prem

    Hello

    al1986 wrote:

    I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

    -HP g61 laptop

    -Windows 7 home prem

    Try a hard reset:

    Remove the battery and unplug the DC power adapter.
    Press and hold the power button for more than 15 seconds.
    Plug the DC power adapter (leave the battery for now)
    Press the power button

    Please post your results here.

    Best regards
    ERICO

  • Pavilion all-in-one Q214 23: factory restore on the new HP Pavilion all in one computer

    I have a week 6 old Pavilion Desktop all-in-one.  I wanted to do a factory install on it because I had a lot of extra things that I don't want anymore, I installed and I thought what a factory restore would be better.  I went to the HP Recovery Manager and no where in the choices he said 'factory restore '.  He used to have this option in the HP recovery environment.  I checked all the options and nothing on the factory restore.  I made a set of recovery discs, but I always remember that HP still had the opportunity to do a factory restore.  I have tried F11 and F8 and no luck.

    Answers or suggestions will be greatly appreciated.

    Hello

    Thanks for posting in the HP Support forum. Welcome!

    According to the model of the computer, it can not be called exactly the HP system recovery but if your computer is originally shipped with Windows preinstalled 10, recovery partition must be present.

    S ' Please, first manually copy your imporant most of the data on an external partition

    -Follow these instructions here to open the collection from inside Windows

    > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html

    > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html#option2

    'S called it Reset - Windows Reset with options to RESET the machine as long as the plant (remove all), with an option to "freshen up" Windows and keep personal files.

    Let me know how it goes and if it works for you.

  • Pavilion all-in-one: win 10 update, back on the window updates.

    We have a home Prem window 7 all-in-one and don't want windows 10 We have hidden updates that relate to the installation of win 10.  All of a sudden the window 10 logo appears on the Update window and wants to be installed.  It will install let us further updates now.  This 10 victory is a real virus and must be killed.  What can we do now to get off the logo and get updates for win 7.

    We received our answer forum microsoft.  There is a tool out there just for that.  It worked.  It is ultimate Outsider.  It worked and is an excellent tool.  I hope this helps someone else.  Thanks Joyce1937

  • Jet all-in - One desktop: HP 4630 ringtone in the printer. How do I turn off the sound

    When I get a phone call, it seems to be a ringtone into the printer rings when someone calls me. How quiet this ring?

    dgcm

    Welcome to the Community Forum of HP.

    The phone ringing?

    The fax settings are on Chapter 6, Page 52 of the User Guide

    Close OFF sounds

    Reference:

    E-all-in-one printer, HP Officejet 4630 range

    Click on the thumbs-up Kudos to say thank you!

    And... Click on accept as Solution when my answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • How to connect a second monitor to my HP Pavilion TouchSmart 20 - f394 all-in-One desktop computer

    I would like a second monitor with this pc

    Figured it out myself... it is not a video connection on this PC... Need a VGA - USB adapter. $60 Best Buy

  • Mouse jumps randomly Sony all in one desktop computer

    My mouse jumps randomly I'll do anything on the computer. I had to reload windows and he started jumping around just a bit, now it does on every 10 seconds. My computer is usless and it is only 2 years old. I've tried everything. Change the sensitivity of my mouse, turn off my desktop touch screen, new mouse, get new drivers. Nothing works!

    Does while surfing on the internet by typing in a Word document. I searched for a fix for about 8 months and no one can tell me what is happening.

    It takes at Best buy, they can't help, which was $ 100. Then it took for Ribbit they could not help. They tell me that it is a Microsoft Windows problem and communicate with them. They had quite a few computers arrive with the same problems. So now I ask Microsoft to help and out a fix for Millon of dissatisfied customers.  It cannot be the computer because everyone having this problem is not the computer some. This problem is not discriminatory against what system you have HP, Dell, Sony, ASUS, Lenovo, Acer, Toshiba computer. The only thing we have in common is Windows.

    Please help with the annoying problem.

    Apple looking better and better every day. I'm tired of running alternative.

    By the way it took about 18 minutes to type this because of the mouse jumping around.

    I'm not a big fan of Norton, but there is nothing inherently wrong with it.  I myself just use the Microsoft antivirus because unlike Norton, he remains free forever and you will never have to pay for updates stay protected.

    If Norton's always keeps you and you are released, you probably have nothing to worry about and it is more likely the material needs repaired or replaced, for example detection touchscreen is default and causing false keys to detect. Perhaps the best thing that I could suggest is to contact Sony to see what they suggest.

    I had the same Sony Vaio, until a few weeks ago. Sold to a friend and now my only computer is a Surface.

  • I just bought my hp pc Pavilion g series, but many times not dΘmarre; the screen remains black or blue and must strive to market several times. What is going on?

    When I turn off my pc and that you want to turn it back on, it does not work and the screen remains black or blue, sometimes but nothing else and does not

    starts up, until I have try several times in pushing and disable the power button and suddenly starts working again. The pc is almost brand new (2 weeks)

    What is going on?  Thank you very much

    Hello

    I suggest you do the repair of the system startup and check if that helps resolve the issue.

    Check the link for more information on repair system below.

    Startup Repair

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

    You can also check the event viewer for more information on the error message.

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

    See also:

    Resolve stop (blue screen) errors
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  • External monitor to an hp pavilion 23-b010 all-in-one desktop?

    I just bought a hp pavilion 23-b010 all-in-one desktop computer... can I connect it to an external monitor? and if so, are there special requirements for the external monitor?

    Here are the specifications of your all-in-one HP Pavilion 23-b010 computer office. According to the specifications, this computer has no video output of any kind ports (DisplayPort, VGA, DVI, or HDMI). You will need to purchase and use a USB-to-video as the EVGA UV adapter more + UV39 or UV19 to connect an external monitor to your computer.

  • With the help of a 2nd monitor with HP ENVY bow 27-k009 TouchSmart all-in-One desktop PC

    I would use a 2nd monitor with my HP all-in-one, but I can't figure out how to do this.  Our it guy says it can be done by using a VGA cord DMI but it does not work.  An another computer guy told me to get a USB cord with a graphics driver and technology at Best Buy told me that it is not possible to use a 2nd monitor with this all-in-one specific.  Please let me know if it is possible and how I would go to do.

    Here are the specifications of your HP ENVY tilted 27-k009 TouchSmart all-in - One desktop PC. Based on the specifications, this model, is a video output any. The HDMI port on the side is strictly an ENTRY;

    3 HDMI input

    To connect your computer to an external monitor, you will need to buy an adapter USB-to-video, as EVGA UV plus + UV39 or many other cards on the market.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

    I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

    Hi edwards39572619 ,

    Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9

    Let me know how it goes.

    Kind regards

    Christian

  • Upgrade memory for HP Pavilion 23 - g040xt CTO all-in-One desktop

    When I ordered my

    HP Pavilion 23-g040xt CTO of all-in-One desktop PC I could only afford the version of 4 GB of Ram. Now, I want to upgrade the memory up to 16 GB. I have a few questions

    1. I noticed all this in a use SODIMM and I was wondering if I could buy any DDR3 SODIMM for this or if I have to buy a specific manufacturer?

    2. now, I have only 4 GB using 1 of the 2 memory slots. I'll be able to buy 2X8GB and use this location empty on my motherboard and run dual channel?

    3. How do the memory locations? Just pop the back of all in one PC?

    Thank you

    According to the specification, this model supports up to 16 GB (2 x 8 GB), as follows:

    Dual channel memory architecture
    Two DDR3 SODIMM Sockets (204 PIN)
    Supports the PC3-12800 (DDR3-1600)
    Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SODIMM

    Any brand or model of RAM memory that meets the following specifications should work on your computer. If you have 4 GB in a housing, you will need to remove it to install both 8 GB DIMMs. Yes, you just need to pop on the back.

    There should be two or more screws on the back that need to be turned counterclockwise until you hear each "click" of 5-6 times. Then, take a lower corner and lift the corner. Repeat with the other bottom corner. Now, lift the... starting back down. You may also need to remove a cap on the memory locations to access.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • 2nd video device HP Pavilion-23-a304a-All-in-One Desktop PC E9V70AA

    Hello world

    I'm new to the forum. I just bought a HP Pavilion all-in-one 23-a304a Office P E9V70AA.

    One thing that I forgot to check was I can plug in a laptop and use the HP as the DISPLAY monitor, sometimes I work from home and using the larger screen would be great, but I've noticed that there are no HDMI or other video ports on the desktop.

    The thoughts and thanks in advance.

    Rob

    Hello

    It has not designed this way, you can not use it as a stand-alone monitor for your laptop.

    Kind regards.

  • I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

    I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

    Hello MichelleOZ,

    Items scanned by scanner are stored as Images (usually from the MPEG files) so I would look in the pictures folder. Otherwise if you remember what you call the files when you saved them you could also search for them via Windows Explorer.

    File photo:

    1. open Windows Explorer

    2. look in the folder list on the left side of the Windows Explorer window

    3. Locate the folder of photos

    Search:

    1. open Windows Explorer

    2. place your mouse cursor inside the Windows Explorer search box (upper right side of the Windows Explorer window), and then type the name of the file that you want to search

    3. Windows will now search for the file.

    4. once found, click on the file to open it.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

Maybe you are looking for

  • Not receive Gmail notifications after update

    Hey guys, I got a problem with Gmail after update of the Volte. For some reason any I was not receive notifications from Gmail. I have to go into Gmail and refresh in order to get all that is useless since I'm already in the application manually. Eve

  • Desktop screen size shrunk

    original title: desktop screen size Size of desktop screen Vista declined 1 3/4 "on each side! Were not able to understand what has happened or how to fix it.

  • HP Officejet 4500: Hard drives of the printer?

    Is a question, a hard drive in the Officejet 4500 which is used for the analyses and copies?  If there is, how you to clean?

  • Microphone no longer works after that I messed up with properties

    I don't know what, but I changed something with properties and since then my microphone is not recognized by the computer. I plug in there, but his does not work, its office of the company 'Genius' microphone, I also have hp probook 4530 s, I think t

  • Block incoming calls

    Does anyone know how I can block a number of incoming particularly within the IPCC Express Premium 4.0 phone (4)? I am currently working on a script where I can put numbers in a XML file to shoot, but I'm having a problem getting the script to a numb