HP pavilion d4790y has no sound, except pc speaker

Similar Questions

• Laptop has no sound except for a quiet static

  Everything started to happen just about 15 minutes ago, I tried to update the drivers but they are apparently aware, restoring them is apparently not selectable. The static method only happens when I try to play something that has his (music, videos, ect.)

  Any help? :(

  If you have a laptop the system drivers are obtained only from manufacturers of portable site technical support, and not from windows update, which is the method used to check if the drivers are up-to-date

  Visit your support to the laptops, update the chipset and no matter which sound driver

• iPhone stuck in mode headphones, no sound except the ringtone, but work helmets.

  Hi, my iPhone has recently stuck in headphone mode, there is no sound except for my ringtone.

  I checked my alert tones, of course the ringtone works, but no other alerts does sounds.

  I put the earphones, they still work. After these tests, it shows my speaker is not damaged, nor is it my output port headphones

  Things I've tried:

  • reset it
  • sucked on each port, while covering others (read in the forums)
  • Blow-dried ports
  • He telephoned and kept switching between the speakerphone and the phone
  • clean the helmet and speaker holes
  • After cleaning I sucked again

  He is now sitting in rice, to see if there is moisture in there.

  I know there are plenty of these kinds of questions here, but I have tried literally everything suggests now and nothing has changed.

  Wanted to see if anyone had any new advice before considering to Vodafone or Apple.

  Thanks in advance!

  ! FIXED!
  

  He was sitting in rice for about 20 minutes, had not fixed so I turned it rebooted and now its fine. Summer has little moisture there somewhere.

• HP pavilion d4790y displat a bands and error blue screen

  HP pavilion d4790y displat a scratches, then blue screen error "cannot reset the display driver and recover from timeout failed" running GEForce 7500LE w/tv, DVI output, VGA has my card that went wrong? only to start in safe mode under vista home premium CPU Intel Dou processor E6700 2.66 GHz SATA hard

  Hello

  Try another monitor and cable on your PC in order to eliminate the PC as possible problem. You can also try your monitor and cable on another PC.

  Open your PC and see if the fan on the video card.  It can be full of dust.

  If the card turns out to be defective, must you output s-video port? If so, then look at this 9500 GT from NVIDIA.

• iPad Mini 4 has no sound in a lot of games and other applications?

  I just got an iPad mini 4th generation and I noticed that the sound does not work in a lot of games and maybe other apps. Is there some sort of widespread compatibility issue?  It doesn't seem to be a hardware problem.  For example, Grand Theft Auto III has its on-screen title, but it has no sound after that. Other totally different games from other developers have the same problem, or no sound at all, for example the tiles of the Piano has no sound. Other applications such as YouTube or Vimeo have no trouble with the sound.

  It seems unlikely there's anything physically broken but there are a lot of apps with no noise (most of these games). What can I do?

  You have checked to see if you've cut notification via the control center sounds: turn on Mute and Orientation lock on iPad Pro, mini iPad or iPad 2 Air 4 - Apple Support ?

• Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar

  Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar. My MacBook Pro is a mid-2012, 2.3 GHz Intel Core i7 Memory 16 GB 1600 MHz DDR3 OS X Version Yosemite 10.10.5

  Graphics Intel HD 4000. Can anyone help?

  Thank you very much!

  Thai-Anh

  Reset NVRAM may solve it.

  How to reset the NVRAM on your Mac - Apple Support

  Or system preferences > sound, check on 'Volume to see the menu bar' to show the volume of the sound in the menu bar.

• What is the maximum size of hard drive, which can be installed in a pavilion d4790y desktop computer?

  What is the maximum size of hard drive, which can be installed in a desktop pavilion d4790y?

  It would be a secondary drive, not the boot drive.

  The operating system is Vista Home Premium, 32-bit.  The version of the BIOS is 5.08.

  Are there any changes or upgrades that would allow an internal hard drive 3 TB to install?

  Here are the specifications and configurable options for your desktop HP Pavilion d4790y and here are the specifications of its card mother P5BW - THE (Basswood2). Based on the specifications and the age of the computer, I would expect you to use a hard drive 3 TB as a secondary drive on Windows Vista (DISPLACEMENT SP1 or SP2) and Windows 7. Formatted as MBR would require the drive to use with a minimum of two partitions. Formatted as GPT would require only a single partition. In no case will you be able to use the 3 TB as a boot device drive because your computer does not support a UEFI BIOS that allows booting from a GPT formatted disk. No changes or updated should be held.

• HP pavilion 13 has 360 x, missing drivers

  Missing drivers,

  HP pavilion 13 has x 360, windows 8.1

  PCI device

  SM Bus controller

  Unknown device 2

  Please can I be provided with a link to the place where to download individual drivers who aren't in my laptop touchpad

  Thank you.

  You are the very welcome.

  As long as your model has the Intel hardware, you can use the following drivers...

  Bus SM:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-133083-1&cc=us&DLC=en&LC=en&OS=4158&product=7255391&sw_lang=

  PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-133106-1&cc=us&DLC=en&LC=en&OS=4158&product=7255391&sw_lang=

  One of the strangers is probably this one...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&DLC=en&LC=en&OS=4158&product=7255391&sw_lang=

  It may be this one...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-133100-1&cc=us&DLC=en&LC=en&OS=4158&product=7255391&sw_lang=

• XP Windows Media Center error "Application has generated an exception could not be treated.

  XP Windows Media Center error

  My windows Media Center continues to send this message whenever I try to open it.

  Application has generated an exception could not be treated. Process id = ox1cc4 (7364) thread id = 0x1cb4 (7348)

  I gives me the ability to run the JIT debugger and when I try I get this message.

  Registered JIT debugger is not available. An attempt to start the JIT debugger with the following command resulted in an error code of 0 x 2 (2). Check the settings of the computer.

  Cordbg.exe 1A 0x1cc4

  Hello

  ·         You did changes to the computer before the show?

  ·         You have the latest updates of Windows installed including the Service Pack 3 for Windows XP?

  Try the following.

  a. close Windows Media Center.

  b. Click Start. Click Run, type cmd in the Open box. Press enter.

  c. type each command mentioned below one after the other and press enter.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  d. restart Windows Media Center.

• Not plugged into the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Original title: high speed HDMI does not.

  I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Hi lisa,

  Try these steps and check the result.
  Step 1: Manage audio devices
  a. Click Start and then click Control Panel.
  b. click hardware and sound.
  c. under sound, click on manage audio devices.
  d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
  e. Select the device and click on set as default and then click OK.

  See http://support.Microsoft.com/kb/953500

  Step 2: Graphics output to monitor
  a. right click on the desktop, click chart options.
  b. output to monitor.

  Step 3: Adjust graphics hardware acceleration
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: Some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider at different levels and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the g6 Pavilion Notebook has a TV tuner built in?

  the g6 Pavilion Notebook has a TV tuner built in?

  Hello:

  You must know the exact model of g6 in order for me to confirm, but to the best of my knowledge, none of the series g6 of laptops come with a built-in TV tuner.

• My Vaio has a sound that seems to come from the fan, is a solution for this?

  My Vaio has a sound that seems to come from the fan, is a solution for this?

  
  

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• New iPhone SE no sound from the speaker of the brand

  I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

  I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

  Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

  • Key "secret" in both positions, no sound from the speaker
  • The top volume, using the volume buttons and the sound, no sound from the speaker settings
  • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
  • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
  • Past the phone power off & on again, no sound speaker
  • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
  • Reset iPhone settings, no speaker sound

  I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

  Thank you

  Hello Andy,

  Thank you for using communities of Apple Support.

  I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  If the problem persists, then please make an appointment with the Apple Store is close.

  http://www.Apple.com/retail/Geniusbar/

  Take care.

• HP Pavilion dv6 has just had a MS XP Update now, I have NO SOUND

  New HP Pavilion dv6 Notebook running on Windows XP just had an update on 01/01/12 and the sound stopped working.

  IDT High Definition CODEC shows that status is ERROR (52) and no sound.  I have a updated driver and uninstalled the device and re-installed.  It does not work.  It was working fine before the update.  Help, please.  Thank you.

  Do a system restore at least a day before MS Update.Start, all programs, accessories, system system restore tools. Choose to restore to an earlier time and choose an available date before the update.

  If MS downloads updates yet, choose the custom option or else display updates. It may be that MS is trying to send a new audio driver that fails. Deselect and make the ting on do not show it again... If update on XP that still offers.

  If MS slides audio driver in once again, do a restore on the audio drivers in Device Manager.