HP pavilion d7 cutting guard screen

Hi I have the portable entertainment d7 and the screen begins to turn in a random way and have difficulty making him

Turn on. I have to close and open a bunch of times. It lights up at startup and then stops, I'll close it then open it and it turns on for a second then off, after that a buntch of time it tends to stay on intill it is moved or gets hit some how.  the laptop has no problem loading or starting just this screen problem can you please help?

Hello

Well many elimanation prosese, I discovered that the rear lights are gone. So, I came to have an older hp Pavilion in the garage that I can take the lights of maybe they'll work. If this isn't the case, then I'll have to order online. LIST OF THINGS TRIED makes me here (to NOTE THAT WHEN MAKING REPAIRS, YOU SHOULD ALWAYS DISSCONECT all FEED them THIS BATTERY INCLUDES THE OUT SOCKET):

(1) pluged external monitor to see if it was perhaps the gpu (graphics card) that was released.

If you do this and you get the video on the external monitor is not the gpu. (when you plug external monitor, you may need to switch monitors in the settings to do this hold function key and Press f4 twice)

(2) disassemble the case around my monitor (note that, when doing so vary careful not not to break the plastic) there are 2 screws to the bottem under stickers small black cover, take the first befor you start to detach plastic. then once I got going, I checked all conections of wire to see if there was any damage.

(3) once I had it all out and noticed that all the wires were not visible I damage disconnected the power for lights that are behind the screen. This is the bottem of sreen more to the right. a 2 conection coming from him. I used the old Pavilion hp I should spend the ration cards. still nothing!

(4) well I changed the lights from the old to the new and put it all back together and is! sound works.  so thank you all for your replies and I hope that maybe this blabble can help someone else!

Tags: Notebooks

Similar Questions

  • HP Pavilion 2205sa g6: replacement screen for HP g6-2205sa

    Hi guys,.

    Please can someone let me know what model screen I need to replace on a g6-2205sa? (Not Prodcut. D1Q47EA)

    I had a glance on the HP site part Surfer and workshop of HP parts, but shows no results for the laptop. If I could just find something that is compatible, I would be very grateful.

    Kind regards

    Hi @angerz,

    Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

    I understand that you want to replace your laptop screen, but were unable to locate the part number. You have tried the part store HP and HP part Surfer without success. When I checked HP Pavilion Notebook PC Maintenance and Service Guide of g6 , the display is replaced on the subcomponent level.  Please look at Chapter 3, page 18. Display Assembly components. If you are unable to locate the part in two HP parts store or HP PartSurfer then try a search on the web with the part number. Please keep me updated on your progress.

    Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution". If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts, click on the " ""Twww.Mountainview.rsb.qc.ca Up " "" give me a Kudos.

  • Pavilion x 360: black screen after log in

    My hp Pavilion x 360 worked very well today in the morning when I turned it on it everything seemed normal I put in the password journal and access the screen once I hit went balck bu the slider was still showign how can I solve this problem since I really need for school?

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, hold down the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

    Kind regards

    DP - K

  • HP Pavilion m9275.nl: HP Pavilion m9275.nl - scrumbled screen

    Hello

    I have this computer desktop HP Pavilion m9275.nl and for a few weeks, the screen is scrumbled. Sometimes on the VGA and HDMI and multiple monitors.

    What is more likely?

    Is my video card failure? Or could it be the motherboard?
    If it is the video card, I can buy it any modern video card or my choice limited by the motherboard?

    Thanks in advance!

    Sjoerd-Jaap Westra

    It's probably your video card or your RAM. I have a link to the video card that would work on your power supply (300W). http://m.newegg.com/Product/index?itemnumber=N82E16814132026. I looked at the specs of your model. How much RAM you have on your machine? I would recommend that you upgrade the ram just in case.

  • HP Pavilion G6-2146sl: white screen after upgrading an AMD A6 - 4400 m for an AMD A10 - 5750 m

    Hi all, I upgraded my HP Pavilion G6-2146sl of the A6 - 4400 m for the A10 - 5750 m, but when I turn on the PC, the screen stays black and nothing happens. What can I do? Thanks in advance.

    Everyone here said it that this processor work? It is not listed in the manual and is incompatible just pure and simple. It will never work on this motherboard. Here is the Manual:

    Manual

    Top of page compatible processor is

    CPU AMD® A10 - 4600M (3.2 GHz/2.3 GHz, 1 600 MHz/4.0 MB L2 cache, DDR3, quad core, 35W)

    I hope that you can exchange it for one that will work. Post back with more questions.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP Pavilion G6-1241EA white screen problem

    I have a HP PAVILION 1241EA G6 and I just got a new motherboard and I installed it in my laptop. My laptop turns on but the screen is white. I looked at the wire and that's fine and I tried to connect it to other vga and hdmi monitors but nothing happens. I need help its long since I'm on the laptop. Thanks for reading!

    I realized that the problem was my lcd screen. If you have the same problem as me just get another lcd screen and see if it works.

  • Pavilion G6 1332el: black screen after installing drivers

    I installed Windows Home Premium x 64 on my HP Pavilion G6 1332el and everithing was very good.

    Downloaded all the drivers for this operating system on the HP Download Page and install them all. I never reboot after each driver installed, so I can not tell you witch cause car my problem.

    After all, I did a normal Shut Down.

    When I powered THE next day, after Windows Logo disapier, only black screen remains.

    I tried VGA output, but my laptop keyboard faield and I FN key on my USB keyboard.

    I'm here, can I di to solve my problem?

    Thank you!

    apashi

    I'm guessing that you have reinstalled Windows from a DVD, right?

    Your PC came with a version of HP OEM of Windows preinstalled, and it is the only version guaranteed to work on this unit.

    You should consider reinstalling using HP recovery media to operate again.  It's a set of DVD and a CD that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.

    You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers

    Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.

    Or, if you prefer, you can do the same by contacting HP Customer Service:

    If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

    If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

    Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • HP Pavilion g7 Notebook black screen at startup (freezing applications)

    Hey everybody,

    I use a laptop laptop HP Pavilion g7 running on Windows 7 Home Premium (64 - bit, 6.1 Build 7601).

    Processor: Intel Core i3 CPU M 380 @ 2.53 GHz (4 CPUs), ~2.5GHz

    Memory: 4096 MB RAM

    I use this laptop for two years and this is the first time I have encountered this problem.

    The problem:

    Whenever I turn on my computer, it goes to start normally.  Before the connection with my user name appears, there is a pure black screen on during about 5 minutes before.  During this time, all I can see is my move move.  Whenever I can finally connect, I wait until it has finished start up and continue to open an application.

    Whenever I was able to open an application, it will run for about 3 minutes, but then everything freezes.  After the use of CTRL-ALT-DELETE, I see a message on a black screen that says "Failure to display security and stop options." He then told me to press ESC or press the power button.  If I press ESC, the laptop is still frozen. If I press the power button, I go through the same process over and over again.

    Even with the SafeMode (Networking), I get a black screen for a few minutes before being able to see my username on the login screen. Fortunately, Safe Mode works very well.

    I ran scans using Norton and Malbytes, found tracking cookies and malware and removed them, but my laptop is still the same.

    I don't know what to do. I hope someone can help me solve this problem.

    Thank you!

    Tsukiou,

  • I have an old iMac (about 10 years) and after a power cut the screen remains black after start-up

    IMac was on but in the sleep when had power cut. After feeding back immediately tried to start over, but I just black screen that could hear the startup chime, and hear the work of the machine. In collaboration with el captain. I have mouse and wireless keyboard. Any ideas?

    Reset the management system (SCM) controller on your Mac - Apple Support

  • Pavilion 17z: death error screen

    Sorry if I put this in the wrong category, but it's the third time, I get this message on my computuer:

    I got this message about three times during the past two weeks. What happens is that I will work on my computer, and it appears on the entire screen. My pc will then restart. Once closed everything. These two days, it went completely black and then go back to what it was - none of my windows closed.

    Can someone help me?

    The error indicates the image is SYSTEM THREAD EXCEPTION NOT HANDLED (atikmdag.sys)

    Hi @Tsukimi,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion 17z Notebook and system unhandled thread exception. This is usually cause by drivers that need to be updated.

    You can simply run the HP Support Assistant, and it will help with the software and drivers on your system.

    If this is not enough, I would like to reset the BIOS withthis document by selecting the reload the default BIOS settings. Helping other people.

    You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. I recommend at least 3 weeks to make sure that you reset the question.

    When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

    I hope this helps.

    Thank you.

  • NEED of HELP PLEASE :) - trying to install win7 on HP Pavilion G7 - cannot circumvent screen UEFI

    I have a laptop HP Pavilion G7.

    Hard disk - 500 GB Seagate SATA

    HP product ID - D1C31UA #ABA

    Here is what happened.

    replaced the screen cracked with new screen

    noticed laptop was suspended at startup and just kept turning it back on.

    took out RAM, dvd rom and battery then put them all back in... Still the problem persists.

    removed the hard drive and backed up all the important files.

    No disk recovery Win8 available - No Win 8 Installation Disc available

    Hard formatted using PC with the laptop connected via jumper USB hard drive.

    Formatted all Partitions

    re-installed a hard drive formatted in laptop

    Win 7 Installation disc on DVD Rom

    laptop kicked

    Consultation: BIOS

    Active LEGACY support

    Back of CD/DVD-ROM first in the initialization of the list of commands

    F10 to save and exit

    Enter 4 digit Code go to confirm the BIOS change

    Restarting the laptop

    UEFI starts again automatically at STARTUP

    the display shows prepare auto repair and diagnose your PC... stops and starts all over again...

    the display shows prepare auto repair and diagnose your PC... stops and starts again

    the display shows prepare auto repair and diagnose your PC... stops and starts all over again...

    How can I disable UEFI so that I can boot from the CD/DVD-Rom to install windows 7?

    Help, please.

    Thank you

    could not initially install Win7 - problem found and solved.

    BAD CD/DVD-ROM

  • Pavilion series: computer laptop screen will Flash after seconds

    my core i 3 hp pavilion laptop series 4 GB ram, 500 gb hd, 2.4 processor has a problem, is that its screen blink after seconds, what is the problem? is there any solution?

    Hey,.

    Thanks for getting back to me so quickly.

    Was the link of the Image on the screen flickers the same as what you see?

    Don't you hear the fan runs constantly?

    You see anything on your screen?

    Please, try the following steps:

    Do you see an image that is not flashing on the external screen?

    Forward to your response.

  • Pavilion DV6 3055tx blue screen after RAM Upgraderei

    The product name and number: HP Pavilion dv6 3055tx

     

    Pre-installed RAM: 3 GB

    Operating system: Windows 7 Home Basic 64 Bit (90 days)

     

    Error message (if any): blue screen on startup of the BONE

    All changes to your system until the problem occurred: RAM upgrade

     

    In the title of the topic, include a brief and accurate description of the problem and your product information: I use this product for a long time... Good...

     

    One day, I thought to upgrade my RAM, so I ordered "CRS 4 GB LT_CMS04GX3M1A1600C11"

     

    Corsair 4 GB DDR3 RAM simplified eBay India

     

    After I received the product, I open the back panel and removed the 1 GB RAM Samsung and Corsair inserted one I ordered.

     

    After this, I restarted my system

     

    When starting Windows came to loading blue screen suddenly comes and laptop restarting

     

    Then a black screen comes with 1. Launch the tool to restart System 2. Start Windows normally

     

    I gave my chance for both, but the same blue screen.

     

    After that, I removed the two Rams and inserted as a single Corsair

     

    Same blue screen

     

    Then I open BIOS and it says 4096 MB installed memory

     

    After that, I inserted the 2 GB with it means Total two-channel 6 GB

     

    But again Blue Screen and BIOS saying 6144 MB

     

    What is the problem?

     

    Please help me solve the problem.

     

    The eBay seller is ready to replace the RAM, but I want to know if this could be a compatibility issue.

     

    Thank you... Waiting for a good answer

    Hello:

    I can't find any specs on that you bought it from memory.

    Your PC will run from 8 GB of memory, but you must be careful as to what memory you select.

    You must get the PC3-10600 (1333 MHz) memory and it must be of low density.

    You can't get PC3-10660 or PC3-10666 memory and cheap will be high density and will not work in any case in your laptop.

    You can see this related posts with someone who had the same problem, and when he bought the good memory, his problem was gone.

    http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dv6t-3000-RAM-upgrade/m-p/2492127#M17965

    I think you bought PC3-12800 memory and this is probably the high density - two bad things.

  • How do you get and replace the hp pavilion 3CR3050D6K LCD flat screen 20-b010

    Pavilion 20-B010 screen has been damaged and is cracked. I would like to get a replacement manual or instructions on execution of Assembly and disassembly.

    Hello @VB_Richard,

    I understand that you need to replace the LCD screen on your desktop HP Pavilion 20 - b010 all-in-One PC and you would like a manual or instructions on how to perform the installation.  The number of product of the screen, you'll need is 652255-001, which is the 20 "TN N-glare W - LED Non - ZBD Sam 250nits. With regard to the steps needed to install it I am you provide those below:

    Before you begin: remove the back cover and bezel.

    Removal of LCD Panel Kit

    1. place the entire middle frame on a smooth flat surface.

    2 detach the connector from the LCD backlight to the LCD.

    3. remove the four screws that attach the LCD Panel to the Central frame - the screws will be on the high or low or the sides of the Board according to the manufacturer of Panel. Each manufacturer will have its own stencils for the location of the screw holes.

    4. partially lift the bottom of the middle frame off the LCD screen.

    5. unplug the LVDS cable from the Control Panel before completely up the average frame off the LCD screen.

    Replacement LCD Panel Kit

    1. to install a new LCD Panel, align the top of the middle frame on the LCD Panel.

    2. connect the LVDS cable to the LCD screen.

    3. lower the average frame completely on the LCD screen.

    4. replace the four screws on the sides or the top and bottom of the Panel to fix the Panel on the Central frame. Use the location of the screws to the stencil for the manufacturer of the Panel that you are installing.

    5. replace the backlight of the LCD screen connector.

    If the new LCD Panel comes from a different manufacturer that the old LCD Panel, remove old backlight converter card connector and install the new connector on the card. The jury has stencils indicating the location of the connector backlight by manufacturer.  Configure the jumpers on the card of converter to match the Panel manufacturers. Painted stencil on the chassis of the Middle table configuration of rider by the manufacturer.

    I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

  • can 1006tx M6 Pavilion, I use a screen of 2560 x 1440

    Can I run a u2713h 27 "WQHD ips 2560 x 1440 monitor dell at full resolution with my Pavilion of M6 1006tx. 3612qm 2.1 GHz, AMD HD7670M DDR3 I7?

    Pavilion of M6 1006tx HDMI can support 2560 x 1440?

    Dell u2713h monitor

    M6 pavilion 1006tx

    I7 3612qm 2.1 ghz

    AMD ddr3 2 GB hd7670m

    HDIM cable connecting

    Thank you!

    Hi @TONYOOI ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion m6-1006tx Entertainment Notebook PC and a monitor running with a HDMI cable. Here is a document on the evolution of the HDMI display settings to fit your screen and to verify your settings, and to solve specific problems.

    I hope this helps.

    Thank you.

Maybe you are looking for

  • How can I change my clips still 406 in iMovie 10.1 to play longer

    I try to use iMovie 10.1 and cannot figure out how to do all the clips even longer. They are now less than a second. I changed the length in preferences, but that doesn't change anything. Help, please. I was very competent in IMOVIE 09...

  • Is satellite A100-797 - compatible with Windows 7?

    Hi all I have a laptop Toshiba Satellite A100-797 and want to upgrade to Windows 7, it will be available. When I run the Windows 7 Upgrade Advisor, it shows me a few errors that make the upgrade is not possible. The following devices are incompatible

  • Create/edit task DAQmx vs DAQmxCreateTask

    I just started using Labwindows recently, so I'm a newbie here. You have a configuration great forum and I hope you can help me with that. so, as the title indicates what is the difference between the use of these DAQmxCreateTask(), the functions Loa

  • Initial charge

    As the title suggests, is it true when you got your phone for the first time to turn it off and let it load about 4 + hours? I want my battery in very good condition.

  • The_CodeDom_provider_type_Microsoft_VJSharp_VJSharpCodeProvider_could_not_be_located.aspx

    I have a new laptop and installed Visual Web Developer 2010 and SP1.  I copied a website on this computer and now get the following error when I build it. The_CodeDom_provider_type_Microsoft_VJSharp_VJSharpCodeProvider_could_not_be_located.aspx I ins