HP-Pavilion Desktop PC recovery error MediaCentre

Similar Questions

• HP Pavilion DV9000 DV9417CL: Recovery error ox400110020000100A

  17-inch HP Pavilion DV9000 series laptop computer (DV9417CL). It's AMD, GL880UA #ABbA part number. During the attempt of recovery with cd, I did the system and used until I get an error of recovery 0x400110020000100A. My HDD is running out and I'm trying to replace it with a new drive. These recovery disks have been made player that went into the laptop.

  The error can be caused by several things: but one of the things easier to forget is the adapter remove the old hdd pins and install it on the new drive hard pins.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disc-error-0x400110020000100A-on-laptop-Presario/m-p/483519#M53952

• 0x8E5E0247 of error after installing a SSD Crucial of 512G on my HP Pavilion desktop computer

  I get this error even after installing a 512G SSD-Crucial in my HP Pavilion desktop computer.  I cloned it from my previous hard drive using Acronis 2014 edition.  I don't know that they are connected.  I called Crucial and asked if there were drivers more recent etc and the answer was not.  Any thoughts?

  Original title: error 0x8E5E0247

  Hey, Cliff,

  Thank you for visiting Microsoft Community.

  I understand that you get an error code with your SSD.

  Sorry to hear about the inconvenience caused. Do not worry, we are here to help.

  One of our community member had the same type of program where Glenn24 responded on 25 January 2011.
  Please refer to this and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-Troubleshooter-error-0x8e5e0247/3d46f7a4-4433-41C8-aba6-e42a3532614e

  Additional information:

  If you have an Intel based, visit the Web site below and it will automatically scan your computer and give you updated information on the pilots.

  http://www.Intel.com/p/en_US/support/detect/

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• HP Pavilion desktop computer - 550-166d: could not find a desktop computer HP Pavilion - 550-166d burner software

  I was unable to find the burning software for my new HP Pavilion Desktop PC - 550-166d. May I know that this model does not comes with the burner software? I try to find in the recovery software, but could not.

  So, I download software Cyberlink Power2Go:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob-140777-1#tab3

  "However a pop-up message: this software cannot be installed on a Hewlett-Packard system".

  No reason?

  Is there any burning software can be installed in my pc?

  Hello:

  I'm surprised that the software did not work.

  See if this version works...

  This package provides CyberLink Power2Go in the supported models running a supported operating system. CyberLink Power2Go is a burning software that allows users to burn data, music or video disks. It offers support for CD, DVD, HD DVD and Blu - ray discs and includes features for disk copy.

  FTP://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75302.exe

  If that doesn't work either, I like this free software... I install the version without open candy.

  https://www.CDBurnerXP.se/en/download

  The specifications of product software for your model, indicates that it does not come with any software CD/DVD burning.

  http://support.HP.com/us-en/product/HP-Pavilion-550-100-desktop-PC-series/8499648/model/9639726/document/c04915775/

• P7-1534 HP pavilion desktop PC, stop and sleep problem

  P7-1534 HP pavilion desktop PC, Windows 8, 64 - bit, sometimes when I turned off my PC, the PC does will not off it stays on and I have to use the power button to turn off the PC and today I put the PC to sleep and he did not wake up when I tried to wake up that I had to use the reboot of the PC power button. I did a diagnosis of memory and found no errors.

  Hi dwellas

  I understand that you are having problems with the computer is shut down and not being able to wake up.

  You can have an application or process that runs in the background that not stop correctly. Close all applications on the status bar that you can, make sure you first close all programs, and then try again. If this works, you should see what you have installed which can be the cause of this.

• Help me choose the HP Pavilion Desktop PC

  Hello!

  Please help me choose the HP Pavilion Desktop Pc which has 3 features-

  1 150 - 200W power consumption.

  2. easily extensible.

  3. must have Windows 7 Upgrade offer with it.

  I'm of the India, I chose only the PC models to choose among them.

  Kind regards

  ErSehmi

  HP Pavilion dv6516tx Intel Core 2 Duo T5250, 2 GB DDR2, 160 GB SATA, Nvidia GeForce 8400 GS, Segate wireless LAN, remote Media Center, Windows 7 Ultimate OEM, Authentec fingerprint reader.
  HP Pavilion m9430in Inter Core 2 Duo E7300, 4 GB DDR2, 1.5 TB Seagate SATA, Nvidia GeForce 9300 map THE, WLAN, TV Tuner, DVB - T integrated with remote control, wireless HP keyboard - mouse, 2309 m TFT LCD, Windows 7 Home Premium OEM.
  HP Pavilion p6040in Inter Core 2 Duo E7400, 3 GB DDR2, 500 GB Seagate SATA, THE Nvidia GeForce 7100, LAN, wireless keyboard - mouse, HP 2009f TFT LCD, Windows 7 Home Basic OEM.
  
  

  Already a customer of HP for the past 6 years. HP has impressive Technical Support (phone Support + Service Center Support) - India

  I have the following models-

  1 HP Pavilion Elite m9430in PC with HP Full HD 2309 m LCD TFT (Brilliant ++ purchase ever)

  2 HP Pavilion Notebook dv6500tx

  And the new that I bought last week is -.

  HP Pavilion p6040in with HP Full HD LCD TFT 2009f.

  A big thank you to everyone for their suggestions!

  Kind regards

  ErSehmi

• HP Pavilion desktop computer - a 550-015: update map PSU and graphics

  I currently have the HP Pavilion Desktop 550 015 which has a 180w PSU and a GTX 745.

  I'm looking to upgrade to a power supply 450W and then later on the track upgrade the graphics card. I learned that some pre-built computers have a BIOS limitation, which may mean that it will not approve some GPU chipsets.

  Is this the case with my PC?

  Thank you for the additional information.

  I see no reason why this power supply does not work for you.  I love Corsair products.  However, if I were you, I would buy a 500W power supply at least.  It will give extra power to the use of maximum power and won't cost much more if necessary.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• the HP Pavilion Desktop 500-329 GPU upgrade

  Hello! I was wondering if it is possible to upgrade the GPU and the power supply of my

  HP Pavilion Desktop PC 500-329

  The GPU is a GTX 960 and the PSU is a 500W EVGA power.

  I read that I had to turn on legacy something with the computer with the f10 boot menu. I made this and just want to know if it's possible.

  Yes, you can upgrade, simply follow the recommendations of the manufacturer of the graphics card on the connectors and the power of the power supply.

  You have a PCI Express x 16 (Gen 3.0) card slot there will be plenty of choice for video cards.

• speakers stopped working in HP Pavilion Desktop PC

  My speakers stopped working in my HP Pavilion Desktop PC. The computer says that they work, but there is no sound and the speakers are not muted. Can someone help me?

  Based on what you describe, you could try going into Device Manager and uninstall the audio drivers and then restart, but if this does not work, chances are that at work, there is a possible hardware problem. Which, given that it is a chip that is soldered to the motherboard, involving probably would involve having the unit in a repair center.

  Todd

  I am an employee of HP

• Recovery disks won't be finished reinstalling attract the Windows recovery error

  I have a HP pc only to return some malware a few weeks. Tried to remove it and restart got the Startup Repair. Who ran, but received a message that the problem could not be resolved automatically. Tried several times but without success.

  Then I tried the system restore, which seemed to work. It should restart the process and I got a screen that says Windows Recovery error. Gave me a few options but also safe mode start Windows normally. If so start normally, just screen becomes black and hangs there. I tried in safe mode, a list of drivers starts, then stops at crcdisk.sys and I get a box that says that I can't get into safe mode because Windows has not finished the installation.

  Then I tried the HP recovery disks to restore the factory settings. Crossed reinstall it without problems and clicked on Finish to reboot and continue. It goes through the process some, restarts a few times and the final reboot immediately comes the same Windows error recovery screen. I tried several times and made sure the only cool things are the monitor, the keyboard, the mouse and the cord. I also tried to remove one of the memory two sticks and the sound card that is not the original. Memory sticks are original.

  I thought it was the failure of hard drive and bought a new one last nite and was installed. Ran the recovery disks appeared once again, as he worked but got the same error Windows Recovery screen after a reboot.

  Any ideas of what I can do? I can't go in safe mode at all.

  Thank you!

  Edit - I forgot to mention that I have managed to get into the manufacturers menu and delete the original hard drive and tried to do the reinstall, but got the same error.

  Fixed it got! Found the answer in another thread here. It's a problem witht Nvidia Geforce card I have and the DVI output. Think an update or something hit malware but all I had to do was remove the video card, plug a VGA instead of DVI cable and I was able to complete reinstall it! Everything works except the sound now. Trying to get that fixed and reinstall the video card later today.

• Windows Recovery error screen: cannot get my computer to start!

  After using my computer for a long period of time, I set it down for a few hours. When I put it up again, the screen was blank and I couldn't get out of hibernation. I manually turned off and restarted. Reboot, I had the Windows recovery error screen, where I was given the opportunity to 'launch Startup Repair' or 'start windows normally '. At the launch of the repair, the screen empties for a few seconds and returns to the error page. When you try to start windows normally, the system rebooted and returned to the error page. I did nothing durastic which would result in this error. Windows was preinstalled and came with any disks. How can I fix my computer and recover my files? My computer is a laptop Gateway MD.

  Have you tried from disk running of all of the above programs.  Of course, some of them managed from the disk as the Startup Repair and system restore.  Others such as SFC and chkdsk or event viewer can be run from the disk by using the command line option (and instructions above on orders to enter).

  Startup Repair and system restore has nothing to help?  Try these other options from the command prompt on the drive if you can't even in Mode safe (which is not a good sign).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• computer laptop dv4 1430 cannot start window and recovery ERROR 1002

  Sorry my English not just

  I have a problem to start my laptop.

  OK, when I turn on the power it lunch START REPAIR > system recovery options > Next > Startup Repair is checking your system for ploblem >... long... when I select restart or shut down , but STILL go to > LUNCH new STARTUP REPAIR

  or when I choose the Recovery Manager >> System Recovery > factory image recovery > ERROR 1002 Please contact HP support...

  Now, I need to open the window and how to do it.

  Please take care of my issue and I hope you understand my question.

  Thank you very much

  Jak

  Hello

  This process will allow you to do a Vista repair disc. This isn't an installation disc, but will allow you to use the Vista Recovery Console that is available on commercial versions of Vista.

  Download the file from the link below.

  Vista 64-bit

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip, when installed, right-click on the zipped folder, select extract files and then click Ok.  You should now see another folder containing the ISO file.

  You will need software to burn the ISO to a CD.  If you don't have that guy on the software installed, download and install ImgBurn and use it to burn the ISO to a CD.

  Once you have created the Vista repair disk, follow the guide on the link below to see if it undertakes to repair your installation - you may need to run this several times.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html#

  Kind regards

  DP - K

• (Still fairly new) HP Pavilion Desktop PC beeps and there is no screen

  Last year I bought a 2nd Pavilion desktop computer - it came with 8 Win. I bought a second WD 1 TB HARD drive as a backup drive and installed in the machine under the Seagate HDD factory. Using my 1st PC ISO Pavilion purchased the previous year, I had OS (8 win so) and tried it migrate to the 2nd HARD drive backup white PC I installed. In this way, between two PCs, I would have 3 1 TB HDD with a Windows 8 operating system. However, when you install Windows on this backup disk, I lost screen 100% function as if it weren't even plugged in the Vid card and after re-booting, I get 6 beeps, no screen, but the PC seems to work all along. I can't of course in the bios with no operation screen to check what I have changed inadverdantly by introducing a copy of an OS on a 2nd drive. If anyone can help?

  old_geekster wrote:

  You have a real dilemma.  The fact that you don't have VGA is not a good thing, in this case.  I can hardly believe that you fried the PCIE slot.  I put most of my money on the BIOS.  However, more strange things happened.  I wish I could come up with a magic solution, but at this point, I am not sure of the result.

  One last thought.  When everything has failed, clear the CMOS.  I saw one step to solve many problems.  I don't have much hope in this case, however.

  Solved the mystery - everything under the Sun EXCEPT tried without clogging the cable of data to the HARD drive, then plug again WHILE the PC was still power up - got instantly on screen, and windows runs perfect - go figure, right?

  want to thank you for trying to help - we appreciate it!

  MD

• poor wireless signal from the router to the new hp pavilion desktop computer

  getting poor signal wireless to the router to the new hp pavilion desktop computer. router 10 feet away. Help!

  Wireless router works fine for the 3 most old cell phones in the office.

  I heard that desktop computers receive wireless signals, but also laptops.  Is there a solution out there for this situation, in that I am?

  Thank you

  Roland

  whatifu wrote:

  A geek at Best Buy told me to open the box and put a few sheets of Tin around the antenna inside. What do you think?

  Roland

  Hello

  Also my suggestion BUT you need to do, of course, don't let touch to the Platinum

  All the best,

• Error installing desktop creative cloud (error code 62)

  Error installing desktop creative cloud (error code 62)

  Please if anyone knows what this code refers

  Error 62 https://forums.adobe.com/thread/1573853