HP Pavilion DM4 1160us - blue screen with rays of light from above

Similar Questions

• HP Pavilion dv7-2160ed - blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  And I also noticed that some hardware is not installed to properliy:

  1 base system device:
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  Device base system 2:
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3 base system device:
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  unknown device 1
  ACPI\ENE0100
  * ENE0100

  unknown device 2
  ACPI\HPQ0004
  * HPQ0004

  Can someone help me with this problem?

  Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.

• HP PAVILION DM4-1160US screen is compatible with a HP PAVILION DM4-1164NR?

  I own a HP PAVILION DM4-1164NR and the screen is broken.  I'm looking to replace as well as the best deals/more easily available screens I can find are for a HP PAVILION DM4-1160US screen.  This form is not compatible with my laptop? They both seem to have the same characteristics and everythign online, but I have read that when the screen is connected is where a problem may occur with different types of screens.

  The replacement screens I have seen available to the dm4 uses a 40 led connector pin. the only thing you need to do of course new screen has the same size, resolution and backlight type as your old.

  The screens are not expensive if you shop wisely for a new one with a warranty and the best price.  This online seller is $55-60, 00 USD.

  Best regards

  ERICO

• Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se

  I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.

  The verification of a KnownDLL failed.  process ended unexpectedly with system

  a status of 0 x 0000221 (0x007fb9c0 0x00000000).

  The system has been shut down.

  I don't have a recovery disc for this computer.  I tried to order them, but they seem to not be available.  It is my daughter's computer.  She said she started having problems after you download Frost Wire (music sharing), and then she took.  We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?

  Hi Yprlvr

  It is not possible to download records from the web site, but you can order and they will send you the discs for you.  If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).

  R

• I want to work on the band 5 GHz with my wireless router. on my HP Pavilion dm4-1160us

  I have a:

  HP Pavilion dm4-1160us laptop

  Internal network card Intel WiFi Link 1000 bgn

  Windows 7 Professional 64-bit operating system

  Netgear n600 WNDR (Premium Edition) 3800-100nas wireless router

  It works fine on the 2.4 ghz band as it should be, but I'd like to replace the network adapter with dual-band to work on the 5 GHz band card to up to 300 or 450 Mbps.

  What are my options

  TX

  Dave LeBlanc

  ldavid wrote:

  I learned in the past by people of varying degrees of knowledge, I can't just change the map.

  Is this true? I have to go in the Bios?

  Thank you

  Dave

  That's right, that's why I posted the link to a service guide for the laptop. The map is mentioned in this manual, so no BIOS modding is needed. There are 2 compatible adapters, but Intel is better than Broadcom...

• HP Pavilion 500-330 Desktop PC blue screen with the cursor after the start

  I have a desktop computer Pavilion 500-330 Windows 8.1 running on a 64-bit system. The problem is after the start, a blue screen with a cursor appears, and the computer does not go to the lock screen.  I did restore, get updates and even left the only blue screen, but after many hours, he was always there.  If I do a force re-booting, the lock screen comes, but not always immediately.  There is no problem to wake up when it is in "standby".

  Any help will be appreciated.

  Hello again @padway,

  Actually, if you already did a cover of the plant on your computer the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. As a recovery plant excludes any kind of software problem this is your best course at this time. A technician from the local computer or a computer repair shop may be an option if you are not in the warranty as well.

  I want to thank you for display on the HP Forums. Have a great day!

• Pavilion dm4-1160us, fingerprint digital driver/software for windows8

  Hello

  I have a Pavilion dm4-1160us. Since I upgraded to windows7 for windows8, fingerprint reader refused to work.

  Please, what can I do to fix this?

  Is there a driver/software that I need to get to make it work with my new windows8?

  Thank you.

  Hello

  First download and install the driver prints digital validity of here (worm 4.1.139, driver Installer see 2.1.0.2).

  Then download HP SimplePass Identity Protection worm 7.1.5.9 here

• blue screen with * STOP: 0x000000A5 (0x0001000A, 0x00000000, 0x00000000, 0x00000000)

  HP Pavilion Elite PC m9150f

  Windows 7

  When I try to start my computer, I get a "Windows Error Recovery" screen and two choices of "Launch Startup Repair (recommended)" and "Start Windows normally".  No matter that the one I chose, I get a blue screen with "* STOP: 0x000000A5 (0x0001000A, 0x00000000, 0x00000000, 0x00000000).  I can't go any further.  Then I turn off the computer.

  I restart the computer and choose F9-Diagnotics.  When it opens.  I see that the test of memory has failed and has an error code of "BIOME-1" and the suggestion of "Please contact HP Support".

  Before all that happens, I reinstalled an antivirus program that I have used for several years without any problems.

  So here I am.

  What should I do now?

  I would appreciate your help.

  Thank you.

  Chris

  Here is the user guide.  http://h10032.www1.HP.com/CTG/manual/c01152947.PDF

  Page 26 is the beginning of the "replacement memory.

• Crash blue screen with error 1gdpmd64.sys

  I have a Pavilion dv7-6b78us laptop.  He started to crash to a blue screen with an error 1gdpmd64.sys.  I tried just reboot and it hangs just still a little later after use.  I searched the web and found a site that recommended upgrading the graphics drivers and chipset.  I did and it still broke to blue screen after a short use.

  I decided to do a system restore then after performing a backup.  The restoration went well past (disk formatted and reinstalled to restore a minimum of software.)  I then reinstalled all the upgrades of Microsoft (with the exception of IE 11) and then installed Norton Security Suite.  I then installed Microsoft Office & Student 2007.

  I fell for the same system error blue screen again.  Is it time to tight teeth and get a new hard drive?

  Thank you.

  Finally, I did a restore to the factory settings that formats the c: / partition and reinstall the PC to factory settings and original software.  I then reinstalling all other software.  So far so good.  I did most of the upgrade of Microsoft (there are more than 130 of them) and that is brought back up to 10.  However, I see there are updates more that need to be installed, so maybe I have have not yet hit bad.  I think I'll install the rest one at a time and see what happens.  Perhaps in this way I know that we're causing problems.

  Have you tried upgrading your graphics and chipset drivers?

• MacBook Pro screen displays a blue screen with the vertical line

  Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.

  It would be useful that you mentioned EXACT model/year of your MBP and the current OSX.

  Ciao.

• Toshiba 32P2400EE - blue screen with message mono

  I have a toshiba tv LED serial number 32P2400EE. Accidentally when you press a button on the remote, it shows only a blue screen with a message of mono on the upper left.

  Please provide assistance.

  Hallo

  Have you tried to resolve your TV back to factory settings?

• WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

  While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

  Hello

  Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

  Readers on the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  1 TB laptop hard drive.

  The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

  About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Stuck on blue screen with Rainbow clouds, floating section did not help.

  As it is said.

  When I run Skype, it just goes straight to a blue screen with blue clouds and a rainbow green at the bottom. I get no login prompt. I followed various guides, such as the change of name login Login1, removal of connection, restart the computer, uninstall and then install Skype (which gets me an error code 2734, I think), uninstalled and installed Internet Explorer. I ran windows update and everything is up-to-date. I also followed the advice in the section floating, and even after using the command line (which was not in the Accessories folder, had to search for cmd to find) and reboot, "press this button" does not work.

  Skype worked fine on Sunday, and now it's broken. The only thing I've done in the meantime is run a repair tool for Windows Media Player as a game, I have installed required him to play in the music of the game.

  EDIT: I am using Windows 7.

  Is your Windows 32 bit or 64 bit?

  http://support.Microsoft.com/kb/827218

  What is the version of Internet Explorer installed on your computer?

  In Internet Explorer, go to help-> words of Internet Explorer.

• No HDMI audio on TV - Pavilion dm4-1160us Entertainment Notebook

  I know there are a lot of post on this issue, but nothing works for me.  I have a Pavilion dm4-1160us entertainment laptop running windows 7 64 bit.  I uninstalled the drivers both graphics and chip and reinstalled (warning says that I was installing was older than the one I had).  Maybe I'm not find the correct drivers to install. There is no audio device HDMI registered on the machine. AUDO devices listed are: IDT High Definition Audio CODEC for speakers and headphones.

  Hello

  My suggestion:

  • Go to this site to download the required driver.
  • Completely uninstall the Audio driver.
  • Install driver from the downloaded file.
  • Turn off the TV and the laptop.
  • Connect the HDMI cable.
  • Start by turning on the TV.
  • Turn on the laptop.

  Concerning

  PS many users have to do some testing and it turns ụp

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.