HP Pavilion dm4: Runtime Error when using Recovery CDs

Hello. I had a HARD drive on this laptop failure. I have an SSD to replace with (on my own) and got the recovery DVD from HP. After 3 hours of trying to install the recovery DVD for the SSD only to fail in the last seconds, because he could not write a 'yes' to a config file, I found a 640GO HDD to recover the DVD to. Now, after starting very slowly in the recovery discs, I get a

Runtime error!

Program: x:\RITA-TOOL\Reducer.exe

This application has requested the execution in an unusual way.

For more information, contact the application support team.

Any help is appreciated!

I ask that your question is raised.

Fact!

Tags: Notebooks

Similar Questions

  • Satellite A55-S106 A:/ghost error when using recovery discs to reinstall the OS

    I have a Toshiba Satellite A55-S1065 that I recently replaced the hard drive, and when I try to use the recovery disks it keeps failing at various points with the A:/ghost error, even if this machine is not a drive A

    I really need help can anyone?

    Hello

    Have you used a compatible HDD and supported?
    A bit of problems of recovery happens sometimes due to hard drives not supported.

    In any case, in my experience, new hard disks must be formatted too.
    The Toshiba Recovery CD contains only an image file and I would recommend formatting the HARD drive, first with the help of another like WinXP or Linux bootable CD...

    Welcome them

  • Satellite L505 - 10K - unexpected error when using recovery disc creator

    Toshiba Satellite L505 - 10 k

    Can't do any recovery disk when I open the toshiba recovery media creator, it says: an unexpected error has occurred. Close the program and then restart it (error code: 0D00F6-49-00000015) and then I click ok and then, it is once again and then I click ok and it is once again and I click ok and then the program comes and when I create the disc it comes to audit, but then it says: cannot read the following file. E:------Boot-fonts-chs_boot.ttf (error code: 02015-20-00000000).

    I really need help, I'm afraid something will happen to my computer, so is there someone who knows something about this kind of problem?

    Grateful for your help.

    Hi putte32,

    To be honest I never received this error before but it sounds like that recovery creator disc doesn t work properly... You should try a HDD recovery to restore the factory settings. Maybe you are able to create the recovery disk.

    Otherwise, I would contact an authorized service provider. If you can t create the recovery disk, the guy should be able to help you to complete this procedure.

  • Receive the 25 (Null) error when using Flightsimulator FSX

    Receive the 25 (Null) error when using Flightsimulator FSX

    Hello

    Try to open the it to start - all programs - Games - Games Explorer, and then clicking the icon FSX.

    A disk error of 25 means that the program cannot read your disk reading.  Either the disc is scratch, dirty or defective.  If you need another drive, or you can try it on another computer. The message of Visual elements of Vista is not serious.  Vista will automatically your screen to a basic compatible mode when the application is launched.  However, it seems that your game is a failure due to the disk error and not the Vista display problem. Try to clean the disc and see if that helps.

    Last resort, it seems you'd have to do a complete uninstall and reinstall FSX.

    Cheers!

  • Microsoft Visual C++ Runtime Library Runtime Error when I try to open PDF files

    Original title: Microsoft Visual C++ runtime error

    I get a Microsoft Visual C++ Runtime Library Runtime Error when I try to open the PDF files. I tried to locate this application in C:\program may explorer\iexplore.ex but cannot locate. How to solve this problem?

    This error started only last month. When I try to open sites that have PDF files, he flashes a warning and then goes in a loop, try to restore. How to fix this error?

    Hi Brent,

    1. is the specific question for PDF files?

    2. have you made any recent hardware or exchange of software on your computer before the show?

    3. which PDF file you are trying to open?

    Please follow the methods:

    Method 1:

    You need perform a clean boot to prevent any third party conflicting application to interfere with the computer.

    To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: You must follow step 4 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

    Method 2:

    To repair Microsoft Visual C++ Runtime Library Runtime Error:

    a. Quit all programs. It is Internet Explorer.

    b. click on the "Start" button on the lower left side of the screen. On the start menu, select "run".
    c. in the window "Run", type "inetcpl.cpl."

    d. in the window "Internet Options", select the "Advanced" tab Under "Reset Internet Explorer settings" section, click "Reset".

    e. click 'Close' in the window "Reset Internet Explorer settings" that appears.

    I hope this helps.

  • Why do I have microsoft visual c ++ runtime error when I tried to install my hp printer

    Why do I have microsoft visal c++ runtime error when I try o install my hp printer cd

    Hello
    1 did you change on your computer before this problem?
    2. What is the brand and model of your computer?

    3. What is the exact error message?
    Follow the suggestions and see if it helps.

    Method 1
    You can see the article mentioned below.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 2
    You can follow the procedure in the article.
    What is a runtime error?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-runtime-error

    You can also see the article for more information.
    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Find and install printer drivers
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  • dbms_crypto - avoid error when using different key in lower environment

    Hello Experts,

    We use Oracle 11.2.0.2. We intend to implement dbms_crypto to encrypt some columns. Clone us the production data at the lower environment (DEV, QC).

    The lowest environments, we do not want to obtain the sensitive data from production and do not plan to use the same key. Instead of getting an error when using different keys, is it possible to get a different set of results.

    In other words, we want the implementation will be same in environments but use a different key in lower environment and obtain different results (or garbage).

    Any suggestions would be greatly appreciated.

    The test of this logic, I get following error when using the different keys to decrypt. It works fine if I use the same key.
    Error on line 1
    ORA-28817: PL/SQL function has returned an error.
    ORA-06512: at "SYS." DBMS_CRYPTO_FFI', line 67
    ORA-06512: at "SYS." DBMS_CRYPTO", line 44
    ORA-06512: at line 19
    DECLARE
      l_credit_card_no    VARCHAR2(19) := '1234 5678 9012 3456';
      l_ccn_raw           RAW(128) := UTL_RAW.cast_to_raw(l_credit_card_no);
     
     l_key               RAW(128) := UTL_RAW.cast_to_raw('abcdefgh');
       l2_key               RAW(128) := UTL_RAW.cast_to_raw('12345678');
    
      l_encrypted_raw     RAW(2048);
      l_decrypted_raw     RAW(2048);
    BEGIN
      DBMS_OUTPUT.put_line('Original  : ' || l_credit_card_no);
    
      l_encrypted_raw := DBMS_CRYPTO.encrypt(src => l_ccn_raw, 
                                             typ => DBMS_CRYPTO.des_cbc_pkcs5, 
                                             key => l_key);
    
      DBMS_OUTPUT.put_line('Encrypted : ' || RAWTOHEX(UTL_RAW.cast_to_raw(l_encrypted_raw)));
    
      l_decrypted_raw := DBMS_CRYPTO.decrypt(src => l_encrypted_raw, 
                                             typ => DBMS_CRYPTO.des_cbc_pkcs5, 
                                             key => l2_key); --**Using different key to decrypt
    
      DBMS_OUTPUT.put_line('Decrypted : ' || UTL_RAW.cast_to_varchar2(l_decrypted_raw));
    END;
    Thank you.

    In general, you can't get different results in different environments, no.

    Of course, you could write your routine to decrypt so that it intercepts it and returns a random string of RAW.

    However, this is not normally the way people go on hiding sensitive data in environments below. It would be much more common to use a tool that is designed for this tool. For example, Oracle has a Pack of masking of data for Enterprise Manager that allows to replace sensitive data with false, but realistic data as part of the updating of the environments below. There are also data from third-party tools like masqueur datamasking.

    Justin

  • HP Pavilion g7-1338dx: error in Partition Recovery Windows 7

    I have a laptop HP Pavilion g7-1338dx. I used recently to minimized Image Recovery on my PC for restore Windows 7 after I decided I liked Windows 7 better. The recovery went well, but recently something happened with my recovery partition. All of a sudden, he's really filled and won't start. HP Recovery Manager (C:\Program Files (x 86) \Hewlett-Packard\HP Recovery Manager\Rebecca.exe\) said that recovery of the system (under System Restore) is disabled. He never used to say that. When I decided to make sure that it worked properly, I get boot error code: 0xc0000225. Why would he do that? I don't have any DVD recovery.

    Thank you!

    -me15prg9926

    If you have not done your defined recovery disk you can order here:

    https://h10025.www1.HP.com/ewfrf/wc/mediaOrder?cc=us&LC=en&productOid=5263043&softwareitem=679942-001

  • Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

    Hello

    After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

    Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

    How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

    Any help is appreciated.

    Thank you

    Bob

    Hey @llebrez,

    Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

    I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

    The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

    If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

    I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

    Please hold me.

    By pressing the Thumbs Up button below, you can always say thank you!

    See you soon.

  • How to fix runtime error when you open a folder in windows xp

    I HAVE WINDOWS XP AND IE 8. HAPPENS EVERY TIME I OPEN A FOLDER OR AN IE BROWSER. SOME RUNTIME ERROR CODES ARE: RUNTIME ERROR 216 AT 004AD768, RUNTIME ERROR 216 AT 004ED768, RUNTIME ERROR 216 AT 009BD768. They vary, but they are basically runtime error 216.le does not when I open a program or application, just files and IE browsers.
    PLEASE RSVP AS SOON AS POSSIBLE.

    HOW I SOLVED IT:

    I have gived upward with this problem when I found a solution.
    I uninstalled IE8, restarted the PC,
    Initially, the problem continues, but after about 5 minutes with the PC and opening folders,
    then the Runtime error 216 has DISAPPEARED forever.
    I ve due to the help of Internet Explorer 6.
    However, I Don t know if the problem would be to reinstall Internet Explorer 8.
    THAT S THE WAY I SOLVED IT THIS HORRIBLE MISTAKE!
    Repeat the 3 steps:
    (1) uninstall IE8
    Reboot 2)
    (3) use PC normally, in a 15-minute error will disappear.
    Don't forget: Error 216 doesn´t dissapers inmediatelly.
  • WCF error when using the API of VSM

    VSM 9.1.4

    Oracle 10g R2

    I am attemtping to use the "MessageSendMessage" command in the VSM API to send back the client permissions and I get the following error message when running it from the VSM server.

    ERROR: The operation 'ContractUnlinkCIAsync' cannot be loaded because it has a parameter or type System.ServiceModel.Channels.Message or a type that has the MessageContractAttribute and other parameters of different types of return. When using System.ServiceModel.Channels.Message or types with MessageContractAttribute, the method should not use other types of settings.

    It's an odd error because I do not use the "ContractUnlinkCI" command which tells me that there is a problem with the generation of the class file.

    I ran the following command to generate my config file and the class in the directory "C:\Program Files (x 86) \Microsoft 4.0 Tools":

    Svcutil t:code /MessageContract. [URL ServiceManager.svc] / out: ISMAPI.cs /config:ISMAPI.config

    The class files and generated config ok. Then I copied the game config to the Web site's web.config file:

    < system.serviceModel >

    < links >

    < basicHttpBinding >

    < connection name = "BasicHttpBinding_IServiceManager" / >

    < / basicHttpBinding >

    < / links >

    < customer >

    < endpoint address = "[ServiceManager.svc URL]" binding = "basicHttpBinding" bindingConfiguration = contract "BasicHttpBinding_IServiceManager" = "IServiceManager" name = "BasicHttpBinding_IServiceManager" / >

    < / customer >

    < system.serviceModel >

    I put the ISMAPI.cs file in the App_Code to my site folder:

    DirectoryStructure.JPG

    My code works fine when I run locally and include the correct querystring values, but it returns the error above, when I run the code from the VSM server. The query string I used: default.aspx? ajaxfunction = 2 & tasknumber = 425134 & agent = 2370 & recvofficer = 2370

    using System;
    using System.Collections.Generic;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using System.Data;
    using Oracle.DataAccess.Client;
    using Oracle.DataAccess.Types;
    using System.Runtime.Serialization;
    using System.ServiceModel;

    partial class _Default: System.Web.UI.Page
    {
    Protected Sub Page_Load (object sender, EventArgs e)
    {
    Response.Expires = - 1;
    Response.ContentType = "text/plain";
    If (Request.QueryString ["ajaxfunction"]! = null)
    {
    Try
    {
    Int16 intFunction = Int16.Parse (Request.QueryString ["ajaxfunction"]. (ToString());
    Switch (intFunction)
    {
    case 1:
    If (Request.QueryString ["tasknumber"]! = null)
    {
    Int64 intTaskNumber = Int64.Parse (Request.QueryString ["tasknumber"]. (ToString());
    Response.Write (getTaskApprovalComments (intTaskNumber.ToString ()));
    }
    break;
    case 2:
    If (Request.QueryString ["tasknumber"]! = null & & Request.QueryString ["officer"]! = null & & Request.QueryString ["recvofficer"]! = null)
    {
    MessageRequest load = new MessageRequest();
    inStruct.sLoginUserID = System.Configuration.ConfigurationManager.AppSettings ["apiLogin"];
    inStruct.sLoginPassword = System.Configuration.ConfigurationManager.AppSettings ["apiPassword"];
    inStruct.sDatabase = System.Configuration.ConfigurationManager.AppSettings ["apiDatabase"];
    inStruct.eEntityType = CRTEntityForEmail.Task;
    inStruct.nEntityRef = Int32.Parse (Request.QueryString ["tasknumber"]);
    inStruct.ePriority = MailPriority.Normal;
    inStruct.eMMAMessageType = MessageMMAType.Approval;
    inStruct.nMessageType = 130;
    inStruct.lRecipientRef = ' ~ ' + Request.QueryString ["recvofficer"];
    inStruct.eRecipientType = MessageRecipientType.Person;
    inStruct.bEmail = true;
    MessageResponse outStruct = new MessageResponse();
    SMC ServiceManagerClient = new ServiceManagerClient();
    outStruct = SCM. MessageSendMessage (inStruct);
    Response.Write (outStruct.sMessage);
    }
    break;
    by default:
    Response.Write ("ERROR: invalid function!");
    break;
    }
    }
    catch (System.Exception Exception)
    {
    Response.Write ("ERROR:" + exception.) (Message);
    }
    }
    Response.End ();
    }

    I hope one of the other directors VSM has met this problem and knows a solution. I tried Googling this issue but with my knowledge of WCF, I don't know what I'm looking at. I also tried commenting on the problem area in the ISMAPI.cs file but it gives me an other errors so I obviously don't know what I'm doing.

    Thank you.

    If locally it works fine I guess you should compare the versions of .net framework assigned to your web applications (application pool), and all the parameters specified in the web.config file.

  • Tecra 8100 system error when using Bank B

    Hello

    I get Bluscreens and system errors when you use Bank B. When you use Module1 in the Bank, everything is ok. When the same module as Bank A Bank (Bank A + B) b, I get errors.

    So, what would it be? What I have to 'turn on' the use of BANK B anywhere or not it looks like its defekt?

    Thanks for any help

    Hello

    Well, you must replace the motherboard if the memory bank has a defect. In this case, the only good way to connect with the service partner. They might give you detailed information.

    Good bye

  • unknown error when using vi express daq devices

    Hi there I have unknown error when you try to use express DAQ of VI. I downloaded and installed device drivers OR who needed to generate EXE since then this problem was occurring what should I do I've done everything that has been mentioned in the following thread

    (http://forums.ni.com/ni/board/message?board.id=170&message.id=336246&query.id=2154746#M336246), but no use, I'm not able to understand the problem can someone help me.

    Hi david thank you for everything my problem is solved by formatting the c drive that was the only solution... Thanks anyway bye...

  • BlackBerry Q5 Microsoft C++ Runtime Error when Sync Q5 to the Outlook 2007 calendar

    Attempt to synchronize my Q5 in the Outlook 2007 calendar I get an error message that indicates:

    Runtime error!

    Program:ResearchinMotion\BlackberryLlink\BlackBerryLink.exe. The application requested execution in an unusual way. Please contact the support team of the application for more information. >

    I am running Windows XP and Office Professional 2007.

    I had the phone for over a year and only recently developed this problem. I uninstalled my programs BlackBerryLink and my downloads and re-installed 3 times. Whenever I try to sync it takes 19-22 minutes 'have the BlackBerry schedule status information"before the error message appears. I checked and the calendars only synchronization are home and BBLink.

    @BlackBerryHelp sent me to a knowledge base article blck.by/1wEvCts on Lotus Notes even after that I told him 3 times I used Outlook not Lotus Notes. Then they told me to contact "Windows".

    So far, I missed 1 very important meeting because the appointment was not in my phone. Help, please! I love my Q5 BB and I REALLY need my calendars in sync!

    The options are limited.  If you call Microsoft at 1 (800) 642-7676 I think they will tell you the same thing.  I don't know what to suggest because Windows XP is no longer supported, and the runtime may be outdated.

  • Moved to the new server and updated applications upgraded to the APEX, 4.2.6.00.03 and get the random error when using IE 11.

    Hello

    I just moved a set of applications on a new server running Oracle 12 c and APEX 4.2.6.00.03, applications where initially on Oracle 10 G database with APEX 3.2.

    When you access via IE 11 users receive the error message after, when it appears that the only way to clear it is to close IE and reopen the application.

    apex_error.PNG

    There is an application that uses a database to MYSQL link, but the error when you use applications that do not use the link, so I'm not sure how to solve the problem.

    The error does not appear when you access applications through Chrome, but not all users have installed chrome.

    Thank you

    Ronnie

    Well Ronnie,

    This thread suppose to have a problem like yours and resolved. Please try on your side:

    After the footer I use: dbms_session.close_database_link ('mysql_databaselink_name');

    Please Urgent help on ora_sqlcode :-28500

    It will be useful.

    Thank you

    Sunil Bhatia

Maybe you are looking for

  • Drivers XP and Vista for HP Pavilion s3600f compatibility

    Had a request to downgrade the OS from Vista Home Premium to XP Pro and has done, but impossible to download drivers XP HP Web site.  Drivers Vista will work?  The downgrade of the BONE has been a success, but no network, by default Windows videos, e

  • Satellite A30: want to partion the HDD - how to do this?

    After installing a new HARD drive in my Satellite A30, I installed windows using the recovery disks, but now you want to partion the drive, how do I do this?Thank you very much

  • Purpose of password

    COES the password used to connect to the computer protects against remote threats, or only from people who have physical access to the computer? Because I'm not worried about my husband, hacking my computer, and I do not prefer the extra keystrokes.

  • Blue Screen BCCode: 3B - computer restarts automatically

    Alaska has lost "I had a problem with my computer restarts several times to give me the option to open in safe mode or regular and whenever I choose regularly and connect to my user count it restarts after a blue screen with information and codes." I

  • Installation of Windows 7, pilots do not work

    Hello! I am installing Windows 7 Professional 32 bit on a ProBook 6450 b, who had originally Windows XP is installed.  However when I do (keeping XP in a separate partition to be sure) there are some missing drivers. One of most important is the lack