HP Pavilion Dv 7 6110ec: start freezing after AMD graphics driver

Similar Questions

• Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

  Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

  DEB

  @DWESTDEWITT,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• Pavilion 15-n023cl: Windows 10 problem with AMD graphics card laptop Pavillion

  Upgrade to Windows 10, but it can only function in Mode without failure.  Installation seemed to go very well.  At the start of Windows 10 for the first time, developed the background of the desktop and the taskbar, but not the icons on the desktop.  When I put the cursor on the task bar, it shows that the system is busy.  The screen flashes then between black and the wallpaper image, with the bar to come a fraction of a second before the background image of the tasks.  These images alternate with an interval of one second.

  Microsoft advised me to update my graphics driver, but the system shows that I have the latest version of the driver for the AMD graphics card.  Any advice?

  Found the problem.  The 8510 G AMD Radeon HD display device is not compatible with Windows 10.  Only the 8570 and higher series models are compatible.  It would be good if HP had some sort of program or advice to help us Pavilion 15-n230cl owners spend so we can run Windows 10.  Restored Windows 8, everything is back to normal.

• Pavilion G6 1304SM: not updated for Win10, AMD graphics card causes serious productivity issues

  Hello.

  I bought my laptop around August 2012. A week ago I updated my computer laptop Windows 10 x 64 to Windows 7 x 64 operating system. Then I did a clean install of Windows.

  I got almost all the driver through Windows Update software. However, the driver for my graphics (Intel HD 3000 + AMD Radeon HD M 7450), I received is defective.

  In Device Manager, the AMD graphics card is referred to as "AMD Radeon HD 7000 series" instead of "AMD Radeon HD M 7450" (the way he recalled on Windows 7).

  On the site Web of the product on hp.com, where I used to see a large list of all downloadable drivers, specially designed for this computer, HP only pasted a label reading "Windows 10 drivers can be downloaded via Windows Update."

  Running in graphical mode fixed, AMD is shown with a yellow exclamation point in Device Manager (I tried to update, but it says I have the latest version). I can't disable the Intel card, otherwise I'm stuck with a resolution of 800 x 600.

  In dynamic mode (the one I'm used to working on), I used to set which application uses what GPU via the Catalyst Control Center. However, now when I do that, if an application is set to run under AMD GPU, it never starts. (It will allocate about 30 MB in RAM - visible via the Task Manager - but will not open the main window). If I change the GPU to Intel, the slopes of the app, but under limited return capabilities.

  I use extensively chart AMD. Not being is not able to use it causes problems of great productivity for me. Are there possible solutions for me, not to mention that roll back to Windows 7?

  Hello @tbc3434,

  Welcome to the Forums of HP Support!

  I read your post on the switchable graphics and wanted to help you!

  You can try to download graphics drivers for Windows 7/8.  If you're still having problems, then you can opt to go back to a previous generation option, in your system settings:

  HP Notebook PC - upgrade to Windows 10

  Once you return to your original operating system, check to see if you encounter the same problem. If this isn't the case, then you can consider holding off on upgrading Windows 10 until the drivers can be updated.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• H8 - 1420t envy: Hp Envy - can't Access BIOS Can or Start Menu after replacing HARD drive

  Hello!
  
  One of my friends has problems with their computer and gave it to the difficulty. First thing I did was try to start it up and it didn't not even start. He tried the auto repair and failed. Then attempted to fix startup problems via the Win8 splash screen and doesn't have too much that. So, I tried a refresh and even that failed. I took out the hard drive, connected on my PC at home and save all the data I could find. I had problems with some data and often he would crash my windows explore (as my friend told me that he did while they were using the PC), so I've determined the drive HARD shot.
  
  Got a new HARD drive and put it in. At caught my drive of Windows 8 and slapped in. When I went to start the PC, I tried to hit all the keys BIOS I could think: Esc, f2, f8, f10 and f12, del even. Nothing has worked. He's just sitting at the HP logo and then after about 20 seconds, he went to a black screen that says something along the lines of "not detected no boot disk".
  
  I can't boot into the BIOS. If I plug the old drive hard when I get to the blue screen of Windows 8 start with parameters such as the "Refresh" and "reset the PC. If I try to access the CD/DVD drive under the 'Remote access' button, I get a black screen with a cursor. It just freezes there. If I try to access the settings of UEFI, it freezes in the blue menu with functions.
  
  I don't really know what to do here. I'd appreciate any help! Never had a problem this stubborn before.

  Wanted to just go back and say I have solved my problem.

  The computer didn't like the keyboard I used! I caught a pretty generic keyboard that was laying around and plugged him that. Hit Esc at startup led me to the boot menu.

• HP Pavilion 17-e119wm: what to do after replacing hard drive

  Hello, I bought a laptop HP Pavilion year last for work or school. He perfectly managed until yesterday when it was freezing to close unexpectedly. Waited about half an hour to see if it would work himself, I had several programs running at the same time. With no results, I did a hard shut down and left for about two hours. Trying to turn it back on, I was stuck on the HP Home screen for almost an hour. I turned off the and tried again. Sometimes I would be stuck on the startup screen, and sometimes he would show that he was about to auto repair, then the screen turns off. In addition, the recovery menu of the system through the F11 key did not work, so I did a Quick Test of system and received a short Drive DST hard failure.

  I plan to buy a replacement HGST 5 K 1000 1 TB hard Drive from the manufacturer; However, my warranty expired last month, and I'm not sure how to reinstall the OS (installed with Windows 8.1 then upgraded to Windows 10 factory), once the new hard drive in place.

  I've never done a HP system recovery Image, and I'm low on funds, so I'm not able to contact HP directly. Help, please. I am a student and I work from home, so I am at a loss without my system.

  If you want to reinstall Windows 10, then this is the part the more easy and free.  I understand, completed after the upgrade to Windows 10, then you can clean install Windows 10 site M$.

  On a work computer, go to the WINDOWS 10 DOWNLOAD, scroll down to the purple 'Download tool now 64 Bit' click that to let do its thing.  On the next screen, choose 'Create the installation media for another PC', then what kind of media you want to use DVD or USB flash.  Once created, install Windows 10 on the PC in question - when everything that fact it is activated.

   

• Satellite L50 - B - 23F Freeze After AMD Catalyst update, with 10 Windows

  Hello world
  I just updated with the latest AMD catalyst drivers downloaded from the internet, Windows 10.

  After the computer restarts, I noticed that it takes a long time to turn on.
  I have tryied to uninstall and reinstall these drivers, but with no result, the only result is that the pc at the moment does not at all.
  There is no way to reset the pc, because the windows BIOS is not shown.
  It only flashes the led 'NUM LOCK' and nothing else, there is no answer for every keypressed on the keyboard.

  How can I make it work again? If not, how can I save the data from my HARD drive?

  Thanks to advice.

  Looks like the BIOS corruption, were you by changing the BIOS settings when shooting problems? Did you uninstall the drivers of your firmware? You may need to flash to your laptop with a file of crysis recovery. And sometimes, there is no guarantee of operation. You can try a BIOS reset first, remove your dough and unplug the unit, hold down the power button for a minute without letting go of taken, then plug the device with the battery and turn it on. Is anything being displayed on the screen? You can repeat this process but hold the Fn + ESC key before you plug in the power cable and turn it on then still hold Fn + ESC. What are the results?

  If it does not, then you need to find the BIOS for the online of the file system and then your flash system, need a BIOS compatible with a version equal or superior to your.

• HP Pavilion dv6 Notebook PC: AMD graphics driver does not not after the upgrade Windows 7 to Windows 10 online

  Microsoft snuck in as the custody of my 3 weeks ago and started the upgrade my operating system Windows 7 to Windows 10 without my consent while I wasn't in front of my laptop. When I noticed what was going on I have reluctantly let the process take its course. I have encountered in many problems. The main source of problems, it seems that graphic of the AMD Mobility Radeon HD5000 series laptop drivers are no longer works, apparently supported by Microsoft drivers.

  AMD gave 2 driver updates: 15.7.1 and Crimson Edition 16.2.1 Beta catalyst.

  I installed 15.7.1 but still had no service message.

  I then installed 16.2.1 always without result.

  Should I give up to get my AMD drivers working and settle for what Microsoft has done that has mucked up the graphics on my HP DVD and Vivo TV apps?

  Hello Grayson,

  It is very likely that you upgraded your computer to windows 10. If it is less than 28-30 days ago that upgrade, would have a chance to go back to windows 7. This is possible by clicking on the small papir in the right corner below only 'no new notifications or new notifications' If your only and press on all the settings-> press update of security &-> in the left, you should find one called "Recovery"-> under that with that you should have a return to windows 7.

  If you return to windows 7, you can block the forced update by using this link: http://www.pcworld.com/article/2998967/windows/how-to-block-the-windows-10-upgrade.html

  hope this helps you.

• system hangs on reboot after installing graphics driver

  I have

  Dell Inspiron N4010

  Core i3

  Win7 Home Basic

  Intel HM57 chipset

  system hung up during use, restarted again, but he hung up again before the startup process, which happened 4-5 times, tried dell diagnostics, but has shown no hardware or memory problem, formatted the system, reinstalled Win7 Home Basic, installed all the drivers and it showed no problems until I installed the Intel Graphics Media Accelerator driver tried to install the driver updated, but it did not help, has run the Diagnotics processor tool Intel showed no problems, test result is pass, tried to format 2 or 3 times, but does help not anyway, I now have standard VGA graphics, impossible to install driver Intel Graphics Media Accelerator as he hangs up after that, please help...

  You have a portable computer, the drivers are obtained from that laptop manufacturers supports the site & nowhere else

  Probably you are not using the cd recovery Dell drivers/utilities

• Pavilion dv7 Notebook PC: AMD graphics driver

  I upgraded my OS from Windows 7 to Windows 10 laptop and now I get the following message:

  No AMD graphics driver is installed or the AMD driver does not work correctly. Please install the AMD driver appropriate for your AMD hardware.

  When I go on the AMD website and don't go through the instructions, I get a message that no compatible driver can be found.

  Can anyone offer advice?

  @cribguru

  This seems to be your only option.

  http://support.AMD.com/en-us/download/desktop/legacy?product=legacy3&OS=Windows%2010%20-%2064

  The specifications of your laptop.

  http://support.HP.com/us-en/document/c02664905

  Your laptop has not been tested for W10 upgrade.

  http://WWW8.HP.com/us/en/ads/Windows10/not_tested.html?JumpID=cp_r163_us/en/pc_cons/win10/update/Findmyproduct

  REO

• Pavilion 15-ac027tx: I can't get the graphics driver amd

  I can't get the graphics driver amd please help me to download

  I tried a lot of things to download this driver in hp drivers website.but it gives 404 not found...

  Please help me...

  Hello @NagaNatarajan,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I understand that you are a problem downloading AMD drivers on the HP site and that he wanted to help you!

  Unfortunately, the drivers you are looking for is not available at this time.  Try uninstalling your current graphic drivers in Device Manager.  Then click on the option to Update driver , let me know how it goes.  Please consult the following resources to help you, if necessary: update a hardware driver that is not working properly

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Vista Home Premium 32 bit freezes after an indeterminate amount of inactivity

  For the last few weeks, my HP Pavilion dv6500 laptop has been freezing after periods of inactivity. Seems that the only change made to the computer until that moment was a Windows update that was late about 3 - 4 weeks. No other programs have been installed.

  I have not precisely timed duration yet, but I think 10-15 minutes of inactivity in freezing results. Little happens is important if the lid is open or closed. Only "a freeze" is to do a hard restart.

  I ran in Mode safe... same results. I did a system restore to a point before the update of Windows. I reinstalled the latest graphics and audio drivers. I ran SpyBot: Search and Destroy... we found an approximately 18 items requiring repair or removal, but it also has not fixed the problem. I ran Check Disk and the problem still persists.

  I'm running out of ideas, and this problem is driving me absolutely crazy. I hope someone can help before I lose my mind. Thanks in advance.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  ==========================================

  Spybot is a fine program, however, it has two modes of residents who can cause problems with IE 8, Vista/Win7
  and other programs. In the settings of Spybot, I stopped TeaTimer - SpyBot - settings. And then start - type
  in the search box-> find Services at the top of list - just right-click on it - RUN AS ADMIN - look for SBSD security
  Change-double click on it - STOP Service Center, then MANUAL. Now you can run SpyBot as one
  scan on demand whenever you want. You will need to restart to stop TeaTimer to load again if it has been
  the before value.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HP Pavilion 500-242ea: do not install after the OS re - install HP Support Assistant

  I had to make one count re - install Windows 8.1 and when I clicked on update HP Support Assistant... a specified message occurred during the update... Click Close. I can not install HP Support Assistant on PC. I downloaded the HP website sp68201 and it ran... the installation process went well but I see still no support help icon in the taskbar even after quick access HP Support Assistant ticking. I checked my pc and HP Wizard is installed in programs and found HPSE and clicked and HP Support Assistant main window appears and then HPSE does not. I uninstalled and reinstalled several times without result.

  I want to do a re factory - set again.

  I can't even re - install through Recovery Manager utility.

  Can anyone suggest how to get Wizard HP work?

  I tried after Forum troubleshooting steps and still get nowhere

  Thanks for the reply.

  I managed to get HP Support Assistant job by running Microsoft Fix It program. I had to restart and run repaired several times. Then, I ran a deep analysis of all files HPSA previously using an uninstall program and deleted remainders. Then I reinstalled sp6801 file and everything is ok. I think that when doing a full reinstall something gets corrupted somewhere in the registry.

  I have another question now with AMD graphic Driver Update which I'll post in the Drivers section

• HP pavilion g4-1318tx - unmanned support page. used g4-1318dx but windows graphic driver

  I downloaded and installed the graphics of Pavilion G4-1318dx driver (since HP Pavilion G4-1318tx has no support driver page when searched pages) but there is no change in the quality of the graphics of the laptop. Windows 7 ultimate still mark the 'VGA graphic card' as not installed. Windows 7 for video is 1.

  Apart from the graph, SM Bus controller and PCI Simple communication controller are always in yellow! mark.  Please help with drivers.

  Hello

  Your support page of laptops is on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5215677&cc=us&DLC=en&LC=en&tool=

  You will probably need to download install the following:

  Driver Chipset.

  Restart the computer after installation.

  AMD Graphics Driver.

  Restart the computer after installation.

  Card reader driver.

  If you still have unknown devices listed in Device Manager, right-click on the device problem and select Properties.  Click on the Details tab, choose hardware ID in the drop-down list and post back with the details presented in the title of the value.

  Kind regards

  DP - K

• Qosmio X 70-B-10 t - internal error of power after updating the graphics driver

  Hello world

  Ive not long has this laptop and every time I install the AMD Catalyst software on it so I can use the AMD graphics card I get a BCOD telling me error of internal power followed continuous restarts with the same error before system restores a delay before the installation of the driver. This is with Windows 8.1 because I have not upgraded to Windows 10 as of yet.

  I tried to install the latest drivers about 4 times now, but the same thing over and over again. As soon as the installation of system software and restarting the laptop for the changes takes place, the internal power error starts. Someone know how to fix this or should I take the laptop under warranty?

  I know that the fault of power internal but only as part of the Windows 10

  It has already been discussed in this thread
  https://Forum.Toshiba.EU/showthread.php?83849

  The problem was related to the AMD graphics driver and Windows system and this has been resolved by Windows update.
  If you get the BSOD install the AMD, so the current driver disk could not be fully compatible with your system 8.1 Win.

  Also the missing system update may be due this... so make sure your OS 8.1 Win is already up to date and use the reader to AMD released by Toshiba.