HP Pavilion DV4-1125nr cannot start after the update/update BIOS version F.12 to d.55

System: HP Pavilion DV4-1125nr PC Notebook

Product #: FR922UAR #AB

The system board ID: 30F7

Version of the BIOS (before the update): F.12

OS: Windows 7

I tried to update the BIOS to d.55 which was provided by HP. After the successful installation the closure of new windows BIOS correctly. I restart the PC, HP Logo appears and then nothing happens. The operating system do not load or start at all.

I also tried to boot using the Windows 98 Second edition CD (to charge BACK), but it did not work.

Please help me...

Fortunately I found a Solution to this problem.

Here are the summaries (and modified according to my needs) the steps that I've taken of the following thread:

http://h30434.www3.HP.com/T5/notebook-hardware/dv4-1140GO-won-t-boot-after-flashing-latest-BIOS/m-p/19698#M2730

1. go to the hp site and download the correct version of your BIOS. In my case it had to F.12. Why not the latest version? Because there is no guarantee that the last one will work for you, know after measures.

2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

3. use 128 MB or no matter what key-USB USB key (the smallest, you might find, because they said the smaller the better ) and reformatted to FAT or FAT32 click with the right button on the drive by clicking on "format".

4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

"5. If you have the graphics card Intel integrated like me, copy the ' 30F7F12U. FD"of the key USB and RENAME the file '30F7F12U. FD' at '30F7. BIN ". Remember that this name calling to order "DV4-1125nr. If you have a different motherboard, the system or the BIOS, the name must be determined according to the.

The next steps are exact 0.0 as follows (the link of a full detailed discussion is provided below), I simply numbered:

6 unplug the adapter from the laptop.

7 remove the battery from the laptop.

8 insert the USB key into one of the USB ports on the laptop.
Does not seem to matter which.

9. press the 'Windows' key and the 'B' key

10. connected to the power adapter.

11 press the 'Power' button on the laptop.

12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
The number of beeps varied, depending on what size of the key USB has been and
the number of files on the USB key, a single beep for many.
If the file was not found, the laptop will restart and try again.

14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

16. about 5 seconds after the ringtone had stopped off the laptop computer.

First I update my pc with the last BIOS (F.66), but did not work for me (operating system not loaded after HP Logo ). So I decided to go back to the old F.12 (the version that has been shipped when the laptop was purchased) according to the procedure described above. But the problem is where to find version F.12 as HP currently provides links only for the version of the BIOS F.66 to d.55 (in the drivers from the hp support site section)

Fortunately, I found a direct link to this version F.12 in the next thread.

http://Forum.NotebookReview.com/HP-Compaq/304332-C700-CQ40-CQ45-dv4-dv5-DV6-hdx18t-Insyde-BIOS-recovery-using-USB-thumbdrive-2.html

F.12 version:

FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40749.exe

This was F.12 and worked for me. Thank God Almighty I return my PC.

Thanks to all who contributed in the discussions above.

Kind regards

-gmuhammad.

If you think that this post has helped you, then please give KUDOS *.

Close the thread (Accept as Solution), if your problem is solved *.

Tags: Notebooks

Similar Questions

  • When I run firefox it takes about 30 seconds and it prevents the functioning of my mcafee? It started after I updated to version 10!

    When I run firefox it takes about 30 seconds and it prevents the functioning of my mcafee? its has started after I updated to version 10!

    Hello

    You can try to update the add-on of McAfee. The latest version is reported to be less problematic. See also this.

  • Cannot start after the blue screen "page in the nonpaged area failure."

    My sons laptop has got to me.  There the error page blue to come with "failure page in the nonpaged area." There is a chain of technical info of numbers, but this changes a little at each attempt.

    I tried all F8 options, without success.  I did a restore disk from the laptop of my other son (which is the same) and that has not worked and I also downloaded a file of system restore on the internet who do not.  I ran diagnostics memory on the scope option and who found nothing.

    No matter what I try, always the fails to start after the first screen with Microsoft Corporation at the bottom and the small lights of scrolling!

    I would be grateful for any suggestions that anyone can have.  I wondered if I should try to borrow a disc of Windows Vista from someone and try from there?

    Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

    I hope this helps.

    Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • BlackBerry Z10 my BB Z10 does not start after the update today at 91 firmware

    Hello

    IM from the India. I bought a Z10 only today in the evening. When I arrived home and connected to the laptop, it has proposed an update to my version 261 91. But after that, my BB10 is not start. Just the red light keeps blinking on the black screen. When I tried to reload the software link, it says, the software is uptodate and turns again into flashes red. Please suggest me how to solve this problem as its been just 2 hours, I used the phone and he's dead to me.

    Remove the battery for 5 minutes and pop again. In this post, there are two links depending on what type of screen appears once it tries to start, after the red light.

    http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/security-wipe/TD-p/2201767

  • Cannot start after the formatted NTFS partition

    Option to boot OS X suddenly absent after that I formatted the partition NTFS (bootcamp) of Windows installation.

    I read many previous question in many Web site and

    I tried to fix it in disk utility, but it cannot go up more.

    user mode single launch I tried, but it does not start.

    already reset NVRAM and SMC.

    Is there not any solution to start again or access my files in the partition mac to back up?

    Thank you.

    Somehow, you managed to format your OS X with making it unusable NTFS volume. I recommend you do the following:

    Clean Install of El Capitan

    Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.

    The Utility Menu appears in 5 to 20 minutes. Be patient.

    Select disk utility, then click on the continue button.

    When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.

    Click the Partition tab in the main window of disk utility. A panel will fall.

    Set the GUID partition scheme.

    Define the type of Format Mac OS extended (journaled).

    Click on the apply button, then click the fact when it is active.

    Quit disk utility and re-enter the Utility Menu.

    Select reinstall OS X and click on the continue button.

    This should install it the version of Mac OS X that has been previously installed when the computer was new.

  • HP Pavilion dv9260nr does not start after the bios update

    After the HP Health Check, it was recommended that I have updated to the current bios.  After you have downloaded and installed, the computer would not start.  Instead, it emits a long beep and 2 short beeps and the screen is blank.  How can I recover a bios update failed?  Is there a way to return the computer to the bios Setup?

    I thought I would post here to help others as I just spent 5 hours to fix this problem. I have personally experienced this on two different computers, both are model DV9260NR. I woke up in the long and short two beep power. The first time it happened, I tried to fix the BIOS by using the recovery disk, but it didn't work. I tried this using a USB floppy like any other player. The floppy drive should get accessible, then machine would be on a second beep then stop, but it would remain under tension. The first time around I gave up and eventually return it to HP as it was under warranty. This time above the current problem computer is more under warranty so I decided to test out of old college. After trying several discs crisis different Phoenix, I finally found one that worked.

    I downloaded crisdisk.zip here:

    http://www.mediafire.com/?3ccb9m0kv0m

    Followed by the latest bios from HP for the DV9260NR

    FTP://ftp.HP.com/pub/SoftPaq/sp42001-42500/sp42187.exe

    I used 7 - zip to extract the files in sp42187.exe and crisdisk.zip

    go to the folder where you extracted sp42187.exe and rename it to 30BBF2D. WPH into the BIOS. WPH

    Copy BIOS.wph to the folder where your snippet CRISDISK.zip

    I have created my disk in Vista, so don't worry about going "Real DOS".

    YOU MUST USE CRISDISK TO CREATE THE DISC!  SIMPLY COPY THE RIGHT FILES ON A FLOPPY DISK DID NOT WORK!

    Open a command prompt, I used command.com not cmd.exe

    CD to the folder CRISDISK.

    At the prompt enter: "CRISDISK. "BAT HAS:

    Finally, put in a blank disk and follow the instructions.

    Once the disk created, slap this puppy in a floppy USB drive and plug it into the computer.  I didn't need to use as or Windows + B, B FN hotkeys to trigger the BIOS recovery. The system entered in the BIOS for me recovery mode and tried to access the USB floppy.  I noticed that not all USB ports will work.  I plugged my USB stick, floppy to the next to the power supply.  If all goes well just turn on the computer with connected USB floppy drive and the disc in the drive. As before the system beeps once per second during playback of the disc.  The disk activity, arrested again, but this time that the system kept beep immediately after discontinuation of access to the drive.  These beeps point you out that the BIOS is flashed, it's just leave turn. When it was made the machine itself set off.  If yours is not, so I doubt that the BIOS recovery will succeed. I then unplugged the USB floppy drive, turned on again and to my surprise I was greeted by the HP and the BIOS logo!  I hope this helps people difficulty of their DV9260NR.  I met four dv9260nr machines and two of them does not update the BIOS using WinPhlash and the finished machine trashed, not good statistically.  I hope that others with the same model will be able to get their machinery running. I'd be curious to know if it works for others.  Post here if you are or do not succeed using this procedure. Good luck!

  • Cannot start after the administrator or power on password screen

    When I try to start to get to where I can fix the computer I start on a back screen which asks for administrator password or power. Don't remember what I put it in the bios. 3 strikes you're out, and you see the message screen 56631584 "prevent the system." hP laptop DV 4 2140US pavillion entertainment notebook running win 7 premium home edition. How can I make this page? Will try to find the used bios and try the a passwords bios generic. Any other suggestions. Feel pretty stupid as I did for myself one night later, change the password. I always
    Tell people to stay out of the bios and does not. Take my own advice. Have a backup in the secondary drive and restore files on the partition on the computer. Any help make me it past this screen would be most appreciated!

    Try > 49799500

  • Service SQL Server 2014 will not start start after the update sp1 (KB3058865, KB3075950, KB3094221)

    Hi, my SQL Server 2014 works very well in my server with WIndows 2012 until I installed the new day & service pack that was required for server hardening.

    I successfully installed SP1 KB 3058865 first, then discovered that the services do not start. After so much research to fix, I came with the 2 cu updates KB3075950, KB3094221 in knowing that it could solve my problem but unfortunately is not.

    I also tried to change the service account that many suggest, but his does not work.

    I tried to replace the master file & maslog but also failed.

    I tried to run etc and unique usermode and restore master db... also failed.

    Here is the log file:

    16/02/01 15:21:21.83 Server Microsoft SQL Server 2014 (SP1 - CU3) (KB3094221) - 12.0.4427.24 (X 64)
    October 10, 2015 17:18:26
    Copyright (c) Microsoft Corporation
    Standard Edition (64-bit) on Windows NT 6.2 (build 9200 :) (hypervisor)

    2016-02-01 15:21:21.84 setting the server UTC: 08:00
    2016-02-01 15:21:21.84 Server (c) Microsoft Corporation.
    2016-02-01 15:21:21.84 server all rights reserved.
    2016-02-01 15:21:21.84 server process ID is 5128.
    2016-02-01 15:21:21.86 Server system manufacturer: "Microsoft Corporation", model of system: 'Virtual Machine '.
    2016-02-01 15:21:21.86 the server's authentication mode is MIXED.
    2016-02-01 15:21:21.86 Server record SQL Server messages in file ' C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG'.
    2016-02-01 15:21:21.86 Server service account is "NT Service\MSSQLSERVER". This is an informational message; no user action is required.
    2016-02-01 15:21:21.86 registry server startup parameters:
    -d C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\master.mdf
    e C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG
    l C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\mastlog.ldf
    2016-02-01 15:21:21.86 Server startup command line parameters:
    s 'MSSQLSERVER '.
    2016-02-01 15:21:22.27 Server SQL Server has detected 1 struggling with 1 cores per socket and 1 logical processors per socket, 1 total logical processors; using 1 logical processors based on SQL Server licenses. This is an informational message; no user action is required.
    2016-02-01 15:21:22.27 Server SQL Server starts at the normal base priority (= 7). It is an informational message only. No user action is required.
    2016-02-01 15:21:22.28 Server has detected 7999 MB of RAM. This is an informational message; no user action is required.
    2016-02-01 15:21:22.28 Server using conventional memory in the memory manager.
    2016-02-01 15:21:22.33 default server collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
    2016-02-01 15:21:22.37 Server this instance of SQL Server is a latest report by using a process ID of 1600 at 01/02/2016 15:13:12 (local) 01/02/2016 07:13:12 (UTC). This is an informational message only; no user action is required.
    2016-02-01 15:21:22.38 the maximum number of connections administrator dedicated to this server instance is '1 '.
    2016-02-01 15:21:22.38 configuration of server node: node 0: CPU mask: 0 x 0000000000000001:0 Active CPU mask: 0 x 0000000000000001:0. This message provides a description of the NUMA configuration for this computer. It is an informational message only. No user action is required.
    2016-02-01 15:21:22.40 allocation of dynamic locking using the server.  Initial allocation of blocks of lock of 2500 and 5000 per node lock owner.  It is an informational message only.  No user action is required.
    2016-02-01 15:21:22.43 spid8s start database 'master '.
    2016-02-01 15:21:22.49 Server CLR version loaded v4.0.30319.
    2016-02-01 15:21:22.51 spid8s d - 8 operations in the database 'master' (1:0). It is an informational message only. No user action is required.
    2016-02-01 15:21:22.61 Server common language features (CLR) runtime initialized using CLR version C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ v4.0.30319.
    2016-02-01 15:21:22.62 spid8s 0 operations cancelled in database 'master' (1:0). It is an informational message only. No user action is required.
    2016-02-01 15:21:22.62 spid8s Recovery is writing a checkpoint in database 'master ' (1). It is an informational message only. No user action is required.
    2016-02-01 15:21:22.79 spid8s SQL Server Audit begins audits. This is an informational message. No user action is required.
    2016-02-01 15:21:22.80 spid8s SQL Server Audit has begun audits. This is an informational message. No user action is required.
    2016-02-01 15:21:22.88 spid8s Trace SQL ID 1 was launched by the "sa" login
    2016-02-01 15:21:23.28 spid8s server name is "UATCASADB". It is an informational message only. No user action is required.
    2016-02-01 15:21:23.28 spid13s A self-generated certificate was loaded successfully for encryption.
    2016-02-01 15:21:23.33 spid13s Server listens on ['none' 1433].
    2016-02-01 15:21:23.40 spid13s Server listens on ['none' 1433].
    local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\SQLLocal\MSSQLSERVER].
    local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\sql\query].
    2016-02-01 15:21:23.48 Server Server listens on [: 1 1434].
    2016-02-01 15:21:23.49 Server Server listening on [127.0.0.1 1434 ].
    2016-02-01 15:21:23.49 connection admin support dedicated server was created for locally listening on port 1434.
    2016-02-01 15:21:23.49 Server SQL Server attempts to save an of Service Principal name (SPN, service principal name) for the SQL Server service. Kerberos authentication is not possible, until a name for the SQL Server service is SPN. This is an informational message. No user action is required.
    2016-02-01 15:21:23.60 spid14s A new instance of the full-text filter daemon host process has been started successfully.
    2016-02-01 15:21:23.71 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph] for the SQL Server service.
    2016-02-01 15:21:23.72 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph:1433] for the SQL Server service.
    2016-02-01 15:21:23.97 spid17s start database 'msdb '.
    2016-02-01 15:21:23.98 spid18s database startup "ReportServer".
    2016-02-01 15:21:23.98 spid19s database startup 'ReportServerTempDB '.
    2016-02-01 15:21:24.03 spid9s start database 'mssqlsystemresource '.
    2016-02-01 15:21:24.08 spid9s the base resource database build version is 12.00.4427. It is an informational message only. No user action is required.
    Error logon 2016-02-01 15:21:24.11: 18401, severity: 14, State: 1.
    2016-02-01 15:21:24.11 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
    2016-02-01 15:21:24.18 spid19s 1 transactions rolled forward in the 'ReportServerTempDB' (6:0) database. It is an informational message only. No user action is required.
    2016-02-01 15:21:24.28 spid19s 0 transactions cancelled in the database 'ReportServerTempDB' (6:0). It is an informational message only. No user action is required.
    2016-02-01 15:21:24.44 spid17s 133 transactions rolled forward in the database 'msdb' (4:0). It is an informational message only. No user action is required.
    2016-02-01 15:21:24.73 spid17s 0 transactions cancelled in the database 'msdb' (4:0). It is an informational message only. No user action is required.
    2016-02-01 15:21:24.74 spid17s Recovery is writing a checkpoint in database 'msdb' (4). It is an informational message only. No user action is required.
    2016-02-01 15:21:24.79 spid9s start database 'model '.
    2016-02-01 15:21:25.01 spid9s clearing tempdb database.

    2016-02-01 15:21:25.94 spid9s start database 'tempdb '.
    2016-02-01 15:21:26.12 spid20s The Service Broker endpoint is in a disabled or stopped state.
    2016-02-01 15:21:26.12 spid20s The Database Mirroring endpoint is disabled or stopped state.
    Manager of Service Broker 2016-02-01 15:21:26.15 spid20s began.
    2016-02-01 15:21:27.32 spid8s database 'master' is upgrading script 'msdb110_upgrade.sql' of level 201328592 level 201331019.
    2016-02-01 15:21:27.32 spid8s-
    2016-02-01 15:21:27.32 spid8s start PRE_MSDB execution. SQL
    2016-02-01 15:21:27.32 spid8s-
    2016-02-01 15:21:28.36 spid8s configuration database COMPATIBILITY_LEVEL option for 100 for database 'msdb '.
    2016-02-01 15:21:28.56 spid8s-
    2016-02-01 15:21:28.56 spid8s start PRE_SQLAGENT100 execution. SQL
    2016-02-01 15:21:28.56 spid8s-
    2016-02-01 15:21:28.60 spid8s configuration database option COMPATIBILITY_LEVEL of 120 for the database 'msdb '.
    2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
    2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
    Error logon 2016-02-01 15:21:29.18: 18401, severity: 14, State: 1.
    2016-02-01 15:21:29.18 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
    2016-02-01 15:21:31.84 spid8s attempting to load library 'xpstar.dll' in memory. It is an informational message only. No user action is required.
    "2016-02-01 by using spid8s 15:21:31.86"xpstar.dll' version ' 2014.120.4100 ' to run the extended stored procedure 'xp_instance_regread '. This is an informational message only; no user action is required.
    2016-02-01 15:21:31.89 spid8s DBCC TRACEOFF 1717, process server ID (SPID) 8. This is an informational message only; no user action is required.
    2016-02-01 15:21:31.89 spid8s DBCC execution completed. If DBCC printed in error messages, contact your system administrator.
    2016-02-01 15:21:31.90 spid8s
    2016-02-01 15:21:31.90 spid8s create table temp_sysjobschedules
    2016-02-01 15:21:32.20 spid8s
    2016-02-01 15:21:32.20 spid8s Alter table sysdownloadlist...
    2016-02-01 15:21:32.22 spid8s
    2016-02-01 15:21:32.22 spid8s Alter table sysjobhistory...
    2016-02-01 15:21:32.24 spid8s
    2016-02-01 15:21:32.24 spid8s Alter table systargetservers...
    2016-02-01 15:21:32.25 spid8s
    2016-02-01 15:21:32.25 spid8s Alter table sysjobsteps...
    2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
    2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
    2016-02-01 15:21:32.42 spid8s
    2016-02-01 15:21:32.42 spid8s-
    2016-02-01 15:21:32.42 spid8s PRE_SQLAGENT100 execution. Full SQL
    2016-02-01 15:21:32.42 spid8s-
    2016-02-01 15:21:32.46 spid8s DMF pre-shaping within walking distance...
    2016-02-01 15:21:32.83 spid8s DC pre-shaping within walking distance...
    2016-02-01 15:21:32.83 spid8s check if Data collector config table exists...
    2016-02-01 15:21:32.84 spid8s State of collector of data before the update: 0
    2016-02-01 15:21:32.84 spid8s pre_dc100::Check if syscollector_collection_sets_internal table exists...
    2016-02-01 15:21:32.84 spid8s pre_dc100::Capturing Collection to define the status of temporary table...
    2016-02-01 15:21:33.05 spid8s Deleting cached generated automatically collect T - SQL packages to msdb data...
    2016-02-01 15:21:33.05 spid8s end of the DC pre-staged to level as follows.
    2016-02-01 15:21:33.05 spid8s DAC pre-shaping within walking distance...
    2016-02-01 15:21:33.06 spid8s from CAD pre-shaping within walking distance...
    2016-02-01 15:21:33.06 spid8s end of the CAD pre-staged to level as follows.
    2016-02-01 15:21:33.06 spid8s-
    2016-02-01 15:21:33.06 spid8s start execution of MSDB. SQL
    2016-02-01 15:21:33.06 spid8s-
    2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.

    2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
    2016-02-01 15:21:33.37 spid8s check the size of the MSDB.
    2016-02-01 15:21:33.63 spid8s error: 8966, severity: 16, State: 2.
    2016-02-01 15:21:33.63 spid8s can not read and lock the page (1:56616) with lock type SH. page no ID invalid. has failed.
    2016-02-01 15:21:33.63 spid8s error: 8946, severity: 16, State: 12.
    2016-02-01 15:21:33.63 spid8s Table error: Allocation page (1:56616) has invalid header values to the PFS_PAGE page. The type is 0. Check the type, unit ID of ID and the ID of the page on the page.
    2016-02-01 15:21:33.63 spid8s error: 912, severity: 21, State: 2.
    2016-02-01 15:21:33.63 spid8s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' has detected 3601, an error state 5, severity 25. It is a serious condition that could interfere with the normal operation and the database is taken offline. If the error occurred during the upgrade of the 'master' database, it will prevent the entirety of a SQL Server instance to start. Review the previous entries in the error log, take appropriate corrective action and restart the database so that the script upgrade steps run until the end.
    2016-02-01 15:21:33.64 spid8s error: 3417, severity: 21, State: 3.
    2016-02-01 15:21:33.64 spid8s cannot recover the master database. SQL Server cannot run. Master of restoring a full backup, repair or rebuild. For more information on how to rebuild the master database, see the SQL Server online documentation.
    2016-02-01 15:21:33.64 spid8s stop SQL Server launched
    2016-02-01 15:21:33.64 spid8s trace SQL stopped due to server shutdown. Trace ID = "1". This is an informational message only; no user action is required.
    2016-02-01 15:21:34.70 spid8s error: 25725, severity: 16, State: 1.
    2016-02-01 15:21:34.70 spid8s an error occurred trying to empty sessions extended all running events.  Some events may be lost.
    2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc/servername.urldomain] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.
    2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc / servername.urldomain:1433] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.

    -----------------------------------------------------------------------------------------------

    I would be grateful for all the help I can get. Thank you.

    Hello

    Your question is beyond the scope of this community.

    Please repost your question in the SQL Server TechNet Forums.

    https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

    TechNet Server forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • does not start after the update of Norton

    This morning, I started my HP Pavilion a6600f, and it started normally, running in Vista.  Then, I received a notice of Norton that I needed an update, something that happens regularly.  He downloaded the updates, and then asked that I restart the computer.  I also notied it says a previous update was also pending.  After restarting, it came to initial blue screen hp and nothing more.  No key worked and the hard drive has not been consulted.  Pressing the button, the computer stop immediately, not the usual five second delay.

    Obviously something happened during this update has been processed.   Any help is appreciated.  Because the computer will not start even in safe mode, I know not how to do almost anything.

    OK, I missed the part of Vista but you also said "the keyboard was not working" and that's why I commented on the keyboard.

    Also, you said "I had then a notice of Norton that I needed an update, something that happens regularly.  He downloaded updates, and then asked that I restart the computer ", there was no mention on an update of Windows.

    If this is the case, download and create the recovery of Norton as tool suggested.

  • iMac does not start after the update of the Sierra...

    Don't know what to do. Sierra, just updated and now my system hangs during startup and turns off.

    Anyone else seen this? No idea what I can do?

    Try a safe boot. Otherwise, you might to reinstall macOS.

    ----------

    Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of tasks. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

    If the problem comes back after a reboot, you may have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.

  • Satellite P300 - 1 H 9 does not start after the update of the BIOS didn't

    I perform an update BIOS, but before the update was completed second shortly after), the laptop has been frozen and is not used to shutdown evenn if hold start buton. So I disconnected the battery and plugin power after that I have reconnceted the plugin from power, then press the power button, it showed a black screen and i heard a
    beep (1 long, 2short)
    CLR CMOS can solve the problem?

    Where the rider is to do the reset?

    P300 - 1 H 9

    Thank you very much...

    Hi mate

    Seems that something was wrong during the BIOS update process.
    Usually the BIOS update should work correctly but the BIOS update is always sensitive technique and something like that can happen.

    Usually the CMOS must be cleared first and then the ROM module must be flashed again. This can be done by an ASP.

    Be in contact with an ASP in local guys help!

  • Satellite Pro L850: ATI Catalyst was able to start after the update of Windows

    Satellite Pro L850 with Windows 8 Pro 64 bit running OK with default Toshiba Catalyst Control Center and the 8.982.10.6000 video driver version. Video chipset is AMD Radeon HD7670M.

    This week, Windows Update offered an update of WDDM1.2 for HD7670M video driver to version 9. I thought it was OK to install it, as he came formally to Microsoft. The updated video driver installed OK.

    After a reboot everything works perfectly except the specially modified Toshiba Catalyst Control Center. CCC reports that "there are currently no parameters that can be configured using Catalyst Control Center". After that I drove back the new video driver version 9 to version 8.982.10.6000, CCC started working again.

    I checked for my laptop model Toshiba product support page, but it is not a new CCC by download. Toshiba will never be released a new CCC that works with the new Microsoft video driver? What alternatives are there?

    As far as I know these drivers are offered as option drivers and you should not install them. Stay with the original drivers. Don t update a driver offered through Windows update.

    Have you tried to roll back the OS to an earlier time before this update has been installed? If it does not do it and check the functionality.

  • Mail does not start after the update of EL Capitan 10.11.2

    Many applications do not work (do not start) after my Mac Book Pro with El Capitan 10.11.2 update:

    -Mail

    -Time Machine

    -App Sore

    How can I fix this?

    -First data backup. Since you said TM does not work you will need to use another method

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable, reinstall the OSX. Nothing shall be lost.

    How to reinstall OS X on your Mac - Apple Support

  • Win7 (Home Premium) cannot start after "important update"

    I just bought a new PC with Windows 7 Home Premium pre-installed. After an update that Win7 launch is no longer, instead the PC reboots from the BIOS. Now, as I write to you from my old XP system, I do that I can't do this post shouldn't indicate that I found a solution. Using the utilities available / suggested at this stage, I can't understand what the 'important' update was so am not able to retrace the steps that may have caused problems. Currently, I run the system recovery, so maybe in a few minutes, I might be able to use the WIN7 PC again. However, I would like to know if anyone else is / has been faced with this problem.

    Hi isamart,

    First of all, I suggest to start the computer in safe mode and see if you can boot to the desktop.

    To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

    Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    If you are able to access safe mode, you can try to check the update installed on your computer and remove it and check if that helps.

    To view and remove the updates installed, follow the steps below.

    1. click on start

    2. in the start search box type appwiz.cpl, and then on enter.

    1. click on view the updates installed in the left pane.

    2. take note of the recently installed update in the list and remove the update.

    3. restart the computer and check if you can start.

    If the steps above fail, you try to perform a system restore on your computer to an earlier date and check if you can boot to the desktop.

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    2. in the System Restore dialog box, click on choose a different restore point and then click Next.

    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

    4. click on finish.

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

    Access the link below to find more information about the system restore.

    http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

    I hope this helps. Let us know the result.

    Thank you and best regards,

    Srinivas R Microsoft Support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows does not start after the update...

    Hope someone can help with this,

    I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

    L.Butler,
    Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
    Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for