HP Pavilion dv4-1413la Enterta: I need device Base system device for HP Pavilion Entertainment PC dv4-1413la USB\VID
I have a HP Pavilion dv4-1413la Entertainment PC and recently upgrade from Windows 7 to Windows 10. My laptop does not start intends first to market. (Another system section) Device Manager indicated that the drivers for the following devices are not installed (Code 28):
PCI\VEN_197B system device of base & DEV_2384 & SUBSYS_30FB103C & REV_00\4 & 39d5c7a5 & 0 & 0428
PCI\VEN_197B system device of base & DEV_2383 & SUBSYS_30FB103C & REV_00\4 & 39d5c7a5 & 0 & 0328
PCI\VEN_197B system device of base & DEV_2382 & SUBSYS_30FB103C & REV_00\4 & 39d5c7a5 & 0 & 0028
Device USB\VID_138A & PID_0001\5 & 27b6f772 & 0 & 2
Several times I try to find the solution in the HP Web site but does not recognize the device. Unfortunately, I was unble to find the drivers in the internet. I'd appreciate your help in this regard. Thank you
Hello:
For the first 3, you need this driver...
This package contains the driver for the Host Controller JMB38X Card Reader in the notebook models and operating systems. JMB38X card reader supports the following types of media: SD, MS, MMC and xD.
File name: sp41457.exe
For the last one, you need this driver...
This package contains the driver for the validity fingerprint sensor in portable models supported and operating systems.
File name: sp42434.exe
Tags: Notebooks
Similar Questions
-
Re: Need to motherboard / system board for Qosmio G20 106
I would be grateful if anyone can help me find one.
My laptop is dead now and need a mother replacement on board.Please also provide you with the best suggestions to find the online store for the system board. I searched for the part, but unable to find it.
Thanks in advance.PS Many people have serious problems with this type of model, mainly with the cooling system! It's my first pc/laptop and I want it to work again!
Motherboard: fnn 2 s 1 a5a001404010Hello
All parts can be ordered from local Toshiba ASP.
Contact Toshiba service provider in your country and order this compatible part.But note; It s not cheap part! The replacement of the motherboard is still an expensive procedure
-
PLEASE HELP ME. AFTER FORMATTING MY LAPTOP AND USING THE WINDOWS OPERATING SYSTEM 7, THERE ARE FOUR DRIVERS MISSING BASE SYSTEM. THEIR HARDWARE IDS ARE AS FOLLOWS: -.
PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C & REV_12
PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C
PCI VEN_1180 & DEV_0592 & CC_088000
PCI VEN_1180 & DEV_0592 & CC_0880
PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C & REV_12
PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880
PCI VEN_1180 & DEV_0852 & SUBSYS_30CD103C & REV_12
PCI VEN_1180 & DEV_0852 & SUBSYS_30CD103C
PCI VEN_1180 & DEV_0852 & CC_088000
PCI VEN_1180 & DEV_0852 & CC_0880
ACPI\HPQ0007
* HPQ0007
WHERE AND HOW DO I DOWNLOAD THESE DRIVERS.
Hello
Download and install the following.
Kind regards
DP - K
-
ProLiant DL380 Gen7: Not found Base system device driver
Hello
I need a Base system device driver
PCI\VEN_0E11 & DEV_B204 & SUBSYS_3305103C & REV_03
PCI\VEN_0E11 & DEV_B204 & SUBSYS_3305103C
PCI\VEN_0E11 & DEV_B204 & CC_088000
PCI\VEN_0E11 & DEV_B204 & CC_0880Hello:
There is no W7 drivers for this device.
See if the driver for Windows Server 2008 R2 works, which would be the equivalent driver.
Try to install the driver manually if automatic installation method does not work, because this driver is not in favor of the ID you have posted.
[HewlettPackard.NTx86.5]
DeviceDesc % = CpqCiDrv_5, PCI\VEN_0E11 & DEV_B204 & SUBSYS_B2060E11
DeviceDesc % = CpqCiDrv_5, PCI\VEN_0E11 & DEV_B204 & SUBSYS_3304103C
DeviceDesc % = CpqCiDrv_5, PCI\VEN_0E11 & DEV_B204 & SUBSYS_3305103C -
Hi, I could not connect my pavilion dv6 2113tx Samsung tv using ch I have cable. When I ran the diagnostics I found this driver base system were missing for 3 and an ene cir receiver driver is missing too. The device base system Id are as shown below
PCI bus4 device0function4
PCI bus4 device0function3
PCI bus4 device0function1
ENE CIR receiver - intel (R) controller interface LPC PM55 express chipset
could someone please help with these drivers where I can find them and also I did not detect second monitor when I tried to adjust the resolution of the screen
Hello:
You need these drivers...
Basic system:
This package contains the driver for laptop models JMicron card reader supported and operating systems.
File name: sp45010.exe
ENE:
This package contains the ENE CIR Receiver driver for laptop models supported and operating systems.
File name: sp44983.exe
If you cannot detect an external monitor, you probably also need to install the graphics driver.
This package provides the driver for the NVIDIA GeForce GT 230 M video chip or 320 M in the notebook models and operating systems.
File name: sp54929.exe
-
Dv4-1430us: lack of Base system device drivers
I just clean installed W7 Home Premeuim after a failed attempt of W10, it seems that I'm missing three "base system device drivers. I went to the HP page where the drivers are usually, but I don't see all the downloads.
If the download page of is the mystery pilots BSD here? Windows Update can't find them.
DV4 1430USHello:
You need this driver for the card reader (Base system Dev):
This package contains the driver for the JMB38X Host Controller Card Reader to
models of portable supported and operating systems. JMB38X card
Reader supports the following types of media: SD, MS, MMC and xD. -
Pavilion Entertainment PC dv6: need a new hard drive for the dv6-1230us
My question is about the HP Pavilion Entertainment dv6-1230us PC. Recently, it was abandoned, and since then it has been giving me the following message if poster every time it starts.
Not found boot device
Please install an operating system on your hard drive.
Hard Drisk (3F0)
F2 System Diagnostics
"For more information, please visit: www.hp.com/go/techcenter/startup"
I know it's important to run the hard drive test, but when I run the diagnostics of the system for the Test drive, it says:
"HDD test failed.
There is no hard drive.I was also on the proposed site and even after "reset my BIOS to default", it recommends running the hard drive test, which does not simply because it has not really helped me the "there is no hard drive. There was a YouTube video that I came across thus suggested pulling the hard drive and diconnecting and reconnect to correct the error in this case that the son is detached, but that no longer works.
SO, I don't know if there is anything more that I can do, I guess that the hard drive is super dead.
It comes with a Seagate ATA hard drive. I was wondering if I could replace it with a SATA hard drive or should it be an ATA? (Even has the material capacity to support a SATA drive?)
Also, it is even useful to replace the hard drive? Should I get a new laptop instead? This laptop is used mainly for just browsing online and checking emails.
Any help is appreciated, thanks.
Yes, the hard drive is so dead, that he not yet register as a hard drive. The dv6-1000 series certainly uses SATA, not ATA drives so I'm not sure of what you see. You can replace it with any drive SATA 2.5 inch width 9.5 mm thick.
Watch this video between: 53 and: 59 and see that it's a SATA drive. If yours is different, so you have confused with your model.
https://www.YouTube.com/watch?v=QQx7PlIXFuE
Hard disks are a small fraction of the cost of a laptop and if your what it takes to, I would say that to replace the hard drive rather than buy a new one.
It is an excellent drive at a great price:
http://www.Newegg.com/product/product.aspx?item=N82E16822236563
You have recovery discs? You run Windows 7? Post back if you need help more to restore system software.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Device base system &; coprocessor problem with driver Windows 7 - Pavilion dv9720us
I have a HP Pavilion dv9720us which was very glitch with Vista 32 bit. After saving all on an external hard drive from Seagate Replica, I did a clean install of Windows 7 64-bit. Everything seems to work, but I get error messages stating that the x 2 Base system device is not working because it doesn't have the correct driver, the coprocessor is also mentioned as not having not the correct driver. All 3 of these devices are listed in the other devices category in Device Manager. In addition, my laptop has 4 GB of RAM and still Windows 7 recognizes only 2 GB. Help! I deliberately enhanced to reduce the glitchy Vista answers. I could go on Windows 7 32 bit, but I don't know who's going to solve all my problems.
Thank you very much!
Kathy
Remove your Ram and install it again.
Notes:
1. ensure that, then you have no battery or ac adapter connected to your laptop.
2 Manufacter installed in this model 2048 MB of Ram (2 GB), so if you have not added 2 GB on your own all is ok.
There will always be problems and your really have 4 GB:
You check Ram with Memtest86 + or GoldMemory. Just burn it on CD *.iso file and run the test. You may need to change the boot sequence in the Bios (to get the BIOS press F10 boot).
Message edited by Daniel_Potyrala on 10/30/2009 12:57 -
HP Pavilion dv8-1099eo: device Base system and unknown device drivers Windows 7 Ultimate lack
Hello
Since a new installation of Windows 7 64 bit it is has little material without driver on all simply not recognised. Here is the hardware ID's I hope someone can help get this sort? Laptop computer runs much slower with the CPU it has. An upgrade from 4 GB to 8 GB of RAM is useful?
1. base system device
PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_08802 - system base unit
PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_08803. base system device
PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_08804 - unknown Device
ACPI\ENE0100
* ENE0100Thank you
Michael
1, 2 & 3 is listed under "Driver-storage" JMicron card reader ACPI\ENE0100 should be ENE CIR Receiver Driver under "driver-keyboard, mouse and input devices.
On your page of Support here:
-
Hello
I have a HP Pavilion dv5 - 1183cl has been upgraded from Windows Vista to Windows 7 Ultimate (32 bit) and I have a few questions.
I have four errors appearing in my device manager, three Base system device and an unknown device, and I don't know what they are or where to find the drivers (since I don't know what they are). In addition, the battery will recharge not (it doesn't seem to be anything wrong with her physically). I wonder if the errors below are related to the battery issue. This is the hardware for each error entry ID.
Basis of the system of the device (bus PCI 6, device 0, function 1):
PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_0880Basis of the system of the device (bus PCI 6, device 0, function 3):
PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_0880Basis of the system of the device (bus PCI 6, device 0, function 4):
PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_0880Unknown device (on Intel(r) ICH9M LPC Interface Controller - 2919):
ACPI\ENE0100
* ENE0100Someone at - it solutions? Thanks in advance,
Jason
Your model has Windows 7 drivers posted. ENE CIR Receiver Driver & JMicron card reader driver, you must:
-
Device drivers for pavilion dv7-1260us base system
Hello. I had a friend put the operating system windows 7 Home premium 64 bit on my computer hp laptop dv7-1260us. He had originally windows vista. Now, Miss me 3 basic systen drivers. under 'other devices '. All say bus PCI 8 under properties. I don't know if I had a 64 or 32 bit operating system prior to this change. I had Windows Vista originally and, as mentioned, now I have Windows 7 Home Premium 64-bit. Any suggestions? Thank you!!
Please use the Windows 7 drivers for your computer Entertainment Notebook PC, HP Pavilion dv7-1260us drivers page. For you current issue, you must install the JMB38X card reader driver from the drivers page.
After installing these drivers, you post "Hardware ID" Device Manager (just the text string) for all other devices missing or unknown as illustrated in the example below.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
volume and switch wireless keyboard not working - HP Pavilion Entertainment Notebook dv4
HP vp190av
Windows 7 32 bit
Unable to work with my key control board volume and wireless switch
I formatted my laptop and UN able to find the solution to this problem
Hello:
You probably need to install this software for volume control.
You may also install this for the wirless work.
The driver is installed for the wireless card?
Y at - it all devices listed in the device with a little yellow Manager! brand?
If so, please post the hardware ID's for one of these devices see you like that.
If you don't know how to find the hardware ID, please read the info on the link below.
Paul
-
HP Pavilion dv9930us: Base system device in Device Manager
I have 3 "Base system device" in Device Manager unknown ads. I've updated from Vista to Win 7. I read threads that say this may be due to problems with card reader drivers. I would like to try this, but I don't know where to look for the manufacturer of card reader so I can download the correct driver... anyone with information would be appreciated.
s/n [personal information]
p / n: FE779UA #ABA
Windows 7 64 bit
Hello:
You need this driver...
-
HP Pavilion dv9894ca: Base system device driver not installed
I need the drivers for base system devices that have not been correctly installed after I've upgraded to windows 8.1. He originally had Vista on it.
Hello:
You need this driver...
This package contains the driver for the Ricoh 5-in-1 card reader for laptops models and operating systems.
File name: sp37726.exe
-
Pavilion ZX5151ea: Cannot find the Base system device
Having problems with a location Base system device driver after ungrading for windows 7 32 bit
Computer laptop medel's Pavilion ZX5151ea
Hardware ID's for basic control system are
PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C & REV_01
PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C
PCI\VEN_104C & DEV_8201 & CC_088000
PCI\VEN_104C & DEV_8201 & CC_0880
the drivers on the HP website
Focus only on windows XP
Amy help would be much appreciated
Hello:
There is no W7 drivers for this model Texas Instruments card reader.
Try the XP driver.
Try to install manually if auto installation does not work.
Maybe you are looking for
-
Lightning cable does not work well
Its already 3 weeks I use iphone to. the cable of the lightning that was in the box does not work well. I need to pull up to my phone charged. How can I solve this problem.
-
What is the difference between a 5 s and SE?
Hello I noticed recently apple came out with this new phone that resembles my 5s but a rose gold, so why should I pay £359,00 for this phone when they are the same, but say he has new things and what it is can someone explain to me?
-
Findroute (SwitchExecutive 3.00)
Hello I've updated SwitchExecutive v2.1 v3.00. I use Findroute() to get the path between 2 points of termination. I don't want to use the desktop mode but if the user connects 2 times the same points I don't return an error: Join the 2 Point Point1 C
-
EA6300 cannot read my external storage but can my Netgear
Hello I have an EA6300 who want to replace my Netgear R6100 with. The router and WiFi work very well, but when I plug in my external USB 3.0 1 TB drive, the Linksys router does not recognize formatting, I get a "formatting not supported or the drive
-
I want to connect my computer to my TV?
I was wondering if its possible to connect my computer to my old tube style tv. I have an ati radeon hd graphics card with 2 GB of mem 6670, but I still have an old tube sony 32 in TV with rca svid and coaxle conectors on the back is their any adapt