HP Pavilion dv5237cl Notebook intermittently Shuts Down Due to a thermal event, fan stops working

Similar Questions

• HP Pavilion G6 2252so closing down due to the high heat (fan was cleaned up)

  I'm trying to fix a G6 model due to heat issues. The laptop is about 1 year. From what I have read on the internet, it is mainly due to the accumulation of dust. I told the owner that this was not covered by the warranty and offered to help with the cleaning of the fan. I completely cleaned the fan (incl. Remove the fan cover) and change the thermal paste on the processor. The problem persists. With the Speccy program, I read time of departure. for CPU to 90 degrees celsius. It's very different when the laptop shuts down. Sometimes it happends fast, at other times, he can run for hours. Even if the processor is completely cold, you can stop even before windows starts correctly. I managed to see the temperatures over 150 degrees celsius which should be alarming high. Even 90 degrees seems VERY high to me. The air blown by the fan seems not hot. It is only moderately hot and adjusts it fan speed according to the temperature. He begins to rise from more than 100 degrees. 90 to 99 degrees it runs pretty slow.

  If I try to go into the BIOS, I have only seconds before the closed laptop.

  From my point of view, he owes me two temperature sensors not working not properly, or the manipulation of temperature sensors is misinterperet, or simply the cooling system which is default. I don't know how the cooling system. The seat has a cobber lead wires for the heater and the fan. The tube contains a fluid? The liquid could somehow have vapourised?

  Be warm and helping the owner canceled its guarantee, now that I've had the dismantled oidissement?

  I tried to havn't updated the BIOS, because I'm afraid I'm going to brick the laptop, if it goes out during the process.

  Where is the temperature sensor placed on the Board? Is the sencot'en CPU built in or is it place in over/under it?

  How can I help the owner more far.

  Best regards

  Frank

  @FrankH82

  Hello again. I had actually read what you have written, but included these pages although I knew you did a large part of him he was already comprehensive, but also a reference to the point in case there was something on the picture in one of the documents that you may have missed, as a task to clean. I also realized that the BIOS update has been in the process as well, but guess you wouldn't do that, according to your previous statement, and that's understandable. I have not updated the BIOS, either when the PC has tendency to overheat and stop in the process (and brick it).

  In addition, there is the part about hardware failure analyses. From what you describe, it seems to me that the fan does not work as it should and is the likely source of the problem. If the unit is running too hot that you mention and the outgoing air flow is not so hot then there isn't enough air stream passes through. If instead it turns out to be a sensor problem, which is most likely going to require a replacement of the Commission.

  I have included the Service of Guide so that you can see how disassemble the unit safely if something had been missed in your household, and also, so you should have access to the parts list, if it turns out that the material is the source of the problem, since it includes the reference numbers for various sections that are replaceable by the customer including the fan and the heat sink (, motherboard, etc.) I have also included in part to answer your question on heat sensors that you request that are not listed as replaceable parts by the discreet.

  With respect to the copper pipes, they are units normally sealed with a small amount of distilled water inside at less than the normal pressure to reduce the boiling point of water, sort of way, it is meant to vaporize to help dissipate the heat. The only reason why the liquid inside would be gone is if the seal in the hose is damaged. If this is the case then it should be replaced.

  Now at this point, other than hardware problems as possible, as the system of cooling or the motherboard, which might need replacement, you can also look at the possibility of a cooling plate to increase the airflow. I myself for one of my laptops that I have left my son to use. He was very helpful while working in a warmer room in summer. It could be a quick thing to try so to make reliable unit until the likely hardware problem is resolved.

  Finally if you don't find that it is the material that needs to be replaced you should try calling the technical support to the 800-474-6836 line. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

• HP Pavilion 6510: Start Menu Shut Down tab always indicates that the updates are available

  The Shut Down on the start menu tab always indicates that there ae updates available.  This persists even after manually searching for and downloading updates.

  Then Microsoft Fixit has been executed, the computer has restarted, and 5 updates have been installed.  But the start menu still indicates that there are updates available.

  This could be the cause?

  How this should be dealt with?

  Is there some updates that aren't installed properly, and if so this could affect the security of the computer?

  Hello

  Go here and download "never 10.

  Run the program. It will turn off the Win 10 forced update.

  Jay

• HP Pavilion dv6 notebook intermittent failure of keyboard

  I have a HP Pavilion dv6 notebook, 1 year old.  Windows 7 Home Premium SP1, 8 GB of Ram.  I have an external wired keyboard (Logitech K120) and a separate wireless mouse.  Frequently in the past few weeks, I noticed that the keyboard will fail once the laptop worked for a while, usually when the laptop is in "sleep".  I hear by fails, * TWO * external and the internal keyboard.  Nor will respond to any strikes at all.  Mouse control is fine, even when the keyboard has failed.

  If I rebooted the system, it works well again.

  I think that when I saw this before, I tried to disconnect the external keyboard, but that doesn't matter, because the integrated keyboard does not work or the other.

  I guess this could result from certain automatic Windows driver installation or upgrade?  Does anyone have advice for the diagnosis or verification of current drivers?

  I have just closed the lid of the laptop, to force the machine mode 'sleep'.  When I opened the lid, the system has taken over, I can log in via the scanner digital, the mouse works but the keyboard has disappeared.  I had to reboot the system, update this message.

  fmaurais,
  
  
  
  Try the following steps:
  
  
  
  Control Panel-> hardware and sound-> Power Options-> change Plan (of the current plan selected) settings-> change the advanced power settings-> parameter of selective suspension of USB-> Disable (both)
  
  Control Panel-> hardware and sound-> Power Options-> change Plan (of the current plan selected) settings-> change the advanced power settings-> PCI-Express-> Link State Power Management-> Disable (both)
  
  
  
  I read on a Microsoft page that is who can solve some problems "out of sleep."
  
  
  
  computerwhiz90,
  
  
  
  I'll see if I can get a model of your laptop to see if I can reproduce the problem.

• my computer shuts down by itself idle, see event log the many different mistakes some cry

  Windows 7-64, HPe 130F, COMPUTER SHUTS DOWN WHIE IDLE No. REASON APPARENTE has critical errors and mistakes of warning in the event log.

  Hello

  Just to confirm if the problem lies in the operating system or not. Please go ahead and enter the BIOS. The link provided below shows how to enter the BIOS.

  http://support.HP.com/us-en/document/bph07110

  If please enter the BIOS and press F5, it asks if you want to set the default setting, press YES. Press F10, then enter it will re-start the comp. Be in the BIOS and see if the computer stops.

  Guess you didn't do all the hw of the stock changes.

• My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

  Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

  When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

  I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you
  Also, either by the way, if this is in the wrong forum topic, please let me know.

  If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.

  • 1

    Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."

  • 2

    Double-click "Network adapters", then right-click on your network device. Click 'properties '.

  • Sponsored links

    • Analysis software of CAN

      Economic and powerful CAN bus analysis and diagnostic software.

  www.CANCapture.com

• 3

  Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.

• 4

  Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

• 5

  Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.

• 6

  Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

• Drop-down menu of Firefox address bar Sporatically stops working

  I had this problem for about a year and some parts of the year are worse than others, and now, according to the latest update of Firefox, this problem is at its absolute worst.

  The drop-down menu in the address bar of Firefox sometimes stops displaying my newest and popularly seen the websites that I have visited. Whenever I have updated Firefox, the problem goes away and he used to stay at the gap to end of weeks in a row, but now the drop stops working almost whenever I close Firefox after this last update a few days earlier.

  This problem persists in the Mode of Firefox safe and apparently appears randomly any plugins/extensions I can I have installed/enabled.

  I am at a complete loss here and would appreciate any help because this drop in the address bar is one of my favorite features in any browser, and it becomes annoying to have to reinstall the plugins more (when I use the Sync feature to reinstall the plugins, the problem is even worse).

  For problems with the file places.sqlite (bookmarks, historical) database, you can check in the Firefox profile folder.

  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  If the extension of Maintenance of places cannot repair the database places.sqlite file remove all places.sqlite files in the Firefox profile folder to rebuild the database places.sqlite latest JSON Firefox backup in the folder bookmarkbackups.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• HP Pavilion Notebook PC shuts down without warning

  Hello

  I've had my HP Pavilion g6-2230sa Notebook PC for over a year now, and just recently, it began to die without any warning when it gets to 30-40% battery. Before today, he used to tell me when he reached 11%, so I had time to save everything, but this has prevented. I tested the battery for calibration and it went, I have also completed all the updates it says he needs, I don't know what next, as I keep losing my job with his off switch. Any help would be great!

  Hi suse-mem:

  I suspect your battery can accept a charge, but does not take to this accusation under the load on the computer.  If you have followed the other suggestions... and are convinced that the fan and heatsink are completely free of dust... then it would probably be a good idea to replace the battery as the next step in troubleshooting.

• Should which driver I download for Pavilion dv5237cl Notebook?

  HP site shows no driver on my dv5237cl I just installed 10 32 bit Windows on.  Missing drivers and hardware for audio ID and the mass storage controller.  Any help would be appreciated.  Laptop is in good condition and the other drivers seem to be well, just two missing drivers or a workaround.

  Hello:

  Try this driver for the mass storage controller...

  This package contains the driver for the Texas Instruments PCI (PCI - TI) 6 x 12/7 x 12 Cardbus (card reader) for the notebook models and operating systems.

  File name: sp35309.exe

  You have to hope that the audio driver XP works for your PC support page.

  Install manually if auto installation does not work.

  This package contains the driver Conexant high definition Audio Chip in the operating systems listed.

  File name: sp33443.exe

• WINDOWS UPDATES AUTOMATIC @ SHUT DOWN MODE AND THEN MY COMPUTER IS NOT WORKING WHEN I TURN IT BACK

  Wow, I thought that I already asked the question. ??? I recently re - set up my old computer from last year. Everything went well on it. All my programs, files, photos, email and internet wall works very well. I went to shut it down and Windows Update popped up indicating not to touch or power off the computer turns off automatically after Windows updates were installed then... There were 22 updates installed by Windows Update and the computer is down. I waited for 6 or 7 minutes and turned on my system back to see nothing load, my monitor screen educated on and said to go to sleep! If someone can tell me what Windows has done to my system. Why they ask me to pay for something that they obviously screwed and how to contact a live person who can help me with their question? PLEASE, ANY HELP IS GREATLY APPRECIATED. MY NAME IS ELIZABETH AND I CAN BE CONTACTED AT 228.385.0336. Thank you very much!

  Hi Elizabeth,.
   
  Check if the fix given in this link will help you in fixing the issue:
  The computer leaves not put into hibernation or does not Wake-on-LAN mode ensures
   
  I also suggest you to follow the steps in this article and the Coachman.
  How to solve the problems of hibernation and standby in Windows XP
   
  For more information on phone Microsoft support option, see:
  Support for Windows XP technical issues and troubleshooting

• My computer shuts down when not used how can I stop this?

  What should I do to keep my computer of shuttting down when it is not used for a while? Vista is what I have.

  What should I do to keep my computer of shuttting down when it is not used for a while? Vista is what I have.

  ==========================================
  See the following articles:

  Change, create, or delete a power plan (scheme)
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Disable on Windows 7 or Vista power management
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-power-management-on-Windows-Vista/

  Management of power (Windows 7 and Vista) Options
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00825528

• Satellite A60 Shuts Down immediately after pressing the Start button / stop

  My A60 stops after 2-3 seconds when I press the power button to open the laptop. After pressing the power button, all the lights on, but until something appears on the screen, the computer cuts the power. Pleasure, DVD and disk hard audio work. At least, the sounds come from these materials. Also from the buttom of laptop, I see that the fan is running.

  This problem started anywhere Yesderday, I closed my laptop properly and carry my laptop to my friends. When I tried to open my laptop, this problem occurred and I could not open yet.

  I tried all combinations of use power supply and battery for power. Non of them works.
  Is there a had the same problem or have any diagonistics for this problem.
  Thank you

  Emrah

  Hello

  Try to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?
  You can also try to use the FN + F5 combination to check if the display will change back to the internal display.

  But look, man, if you are not successful then I guess there must be a serious hardware problem and only the laptop technician might know what's wrong.

• Cannot shut down Windows 10 laptop with power button / stop

  I have a laptop Aspire E5-532 with Windows 10.  I have configured the power management to turn off the laptop when I push the power button.

  It does NOT work.  When I push the power button, nothing happens.

  Help!

  I thought about it.  Press the button for a few seconds so that the system recognizes the button push!  When cela all functioning properly.

• Stop due to a thermal event (?) Explain please

  Very slow computer.  Now started to 'cut' (not the power of the it) after 30 minutes of use.  When turned on again there is an alarm that goes off and then a message click on enter to continue.  As a result, the computer turns as usual.  What is causing the machine to cut and what can be done to fix this?

  Overheating.  When it reaches a critical temperature it closes instantly down to avoid damage.  If it's a laptop with care use compressed air to blow into the pipe exhaust and heat.

  Download cpu - z (free) to keep an eye on the time.

• HP Pavilion dv6 Notebook PC audio problem after the last update of HP

  Hi after I updated my HP Pavilion dv6 Notebook PC, windows 7, core i5 yesterday my sound suddenly stopped working... I tried to restart all my BIOS by default.  go to Device Manager and uninstall my audio and restart to re install automatically, but its does not work...

  I really need help for instructions on how to fix this I am not a computer expert so I need step by step clear instructions!... so please help I really need my computer to be on the right track again coz im using this in school and project...

  Help, please!...

  Click on the link below. Enter your product number as that indicated on the Service tag on the bottom of the laptop (can be under the battery). You can also get the product number by pressing Fn + ESC key. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & install the latest Audio driver.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  ```````````````````````````````````````

  If still no sound, try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on