HP Pavilion dv6-1277el blue screen and disk hard error 303

Hello

I have a HP Pavilion dv6-1277el with Windows 7 installed. For some time the laptop crashed several times with blue screens until one day windows no longer starts or is is stuck on the loading screen.

I used an Ubuntu live CD to backup data to the HARD drive of the laptop on an external drive, but after that transfer a large amount of data that I received a warning ON impending drive failure due to reassign areas.

Restarting the laptop I received the following message from the HP auto test:

Hard drive 1 fast (303)
Hard drive 1 full (305)

The strange thing is that, after the first time that I had these messages, Windows rebooted to work without any problem and I've never had any blue screen again.

What should I do? Anyway to change my HARD drive or her trust?

Thank you

Hello new solvayhütte.

Probably, he continues to work because it detects a problem with the drive.  However, the reader may not be totally dead immediately.  So now is the time to get ALL the data that you want out of the disc before it goes bad.

You have two options currently.  You can replace the drive hard yourself (it is not difficult) or contact HP for a repair.

To replace the drive hard yourself, you can use your notebook PC Maintenance and Service Guide for instructions on disassembly of the laptop.  There are also specifications stating the hard drive inside your laptop.  Use this information to buy a new hard drive and compatiable.

If you do not want to replace the drive yourself, you can contact HP and inquire about a repair.  If you are within the United States or the Canada you can call to the 1-800-474-6836.  However, if you are outside this area, you will need to go to the HP support site for the contact information for your region.

I hope that this information has been useful.  Have a great day!

Tags: Notebooks

Similar Questions

  • Pavilion DV6 3055tx blue screen after RAM Upgraderei

    The product name and number: HP Pavilion dv6 3055tx

     

    Pre-installed RAM: 3 GB

    Operating system: Windows 7 Home Basic 64 Bit (90 days)

     

    Error message (if any): blue screen on startup of the BONE

    All changes to your system until the problem occurred: RAM upgrade

     

    In the title of the topic, include a brief and accurate description of the problem and your product information: I use this product for a long time... Good...

     

    One day, I thought to upgrade my RAM, so I ordered "CRS 4 GB LT_CMS04GX3M1A1600C11"

     

    Corsair 4 GB DDR3 RAM simplified eBay India

     

    After I received the product, I open the back panel and removed the 1 GB RAM Samsung and Corsair inserted one I ordered.

     

    After this, I restarted my system

     

    When starting Windows came to loading blue screen suddenly comes and laptop restarting

     

    Then a black screen comes with 1. Launch the tool to restart System 2. Start Windows normally

     

    I gave my chance for both, but the same blue screen.

     

    After that, I removed the two Rams and inserted as a single Corsair

     

    Same blue screen

     

    Then I open BIOS and it says 4096 MB installed memory

     

    After that, I inserted the 2 GB with it means Total two-channel 6 GB

     

    But again Blue Screen and BIOS saying 6144 MB

     

    What is the problem?

     

    Please help me solve the problem.

     

    The eBay seller is ready to replace the RAM, but I want to know if this could be a compatibility issue.

     

    Thank you... Waiting for a good answer

    Hello:

    I can't find any specs on that you bought it from memory.

    Your PC will run from 8 GB of memory, but you must be careful as to what memory you select.

    You must get the PC3-10600 (1333 MHz) memory and it must be of low density.

    You can't get PC3-10660 or PC3-10666 memory and cheap will be high density and will not work in any case in your laptop.

    You can see this related posts with someone who had the same problem, and when he bought the good memory, his problem was gone.

    http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dv6t-3000-RAM-upgrade/m-p/2492127#M17965

    I think you bought PC3-12800 memory and this is probably the high density - two bad things.

  • Blue screen and crushed; Hard Drive 'HEALTH' this will cause?

    Original title: hard drive 'HEALTH'

    I had a blue screen and crashed the day before yesterday; I tried to the already posted the option TOOLS inder, no SOLUTION appears. I would like to know if my hard disk is ok or if I need to call a serive to work on the machine. I have some very important information on my machine. Download the disk is not wise because of confidentiality.

    Moved from Vista Performance and Maintenance Forum.

    Be able to solve what could be the cause of your failed system, to the dump files. In an ideal situation, several files would be necessary to establish a model so if you have more than one, please download them.

    Please refer to the link below to get the procedure recover, zip and upload them to the site as onedrive, file sharing google "dropbox, etc.".

    When you are finished, make public the folder and share the link here.

    Blue Screen of Death (BSOD) created by ZigZag3143 (MS - MVP)
    http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d

  • Pavilion dv6: gel questions - Long and short DST errors

    Hello.

    Im having freezing randomly and stopping the laptop to answer. "" Do you have the test equipment fast twicw and expand and these errors appeared, 'short DST failed: 0GC49F-64983J-QFPK1G - 60 X 603'and'LONG DST FAILED: 0GC49F-64983J-QFPK1G-61FW03 '. Also the webcam stoped to work, but I don't think it's related. Do these errors mean?

    Failure of the [disk Self Test] DST indicates that your hard drive will probably fail in the near future.

    You should backup all important files, to create a system recovery media and replace the hard drive with the same size or larger than the original.

    If you found my answer helpful please say thank you by clicking on the icon of the thumb.
    If my answer has solved your problem, please mark it as accepted Solution. Thank you!

  • Help..! I got the blue screen and other issues, do not know what to do...

    Signature of the problem:
    Problem event name: BlueScreen
    Please help me, I got the blue screen and this message today while I was trying to solve a problem with the backup of my pc...
    Don't know what to put here, if you need more make me know... Thank you

    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 8086
    BCP1: 00000000
    BCP2: 00000000
    BCP3: 00000000
    BCP4: 00000000
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini030513-01.dmp
    C:\Users\Andy\AppData\Local\Temp\WER-59483-0.SysData.XML
    C:\Users\Andy\AppData\Local\Temp\WERF871.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Hello

    Thanks for posting the question in the Microsoft Community!

    To help you better, we need more information.

    What is brand and model computer?

    To work with the issue, I suggest you check out the site:

    How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

    http://support.Microsoft.com/kb/958233

    Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

    Note: When you format a disk, all data that it would disappear.

    It would be useful for us to identify the problem, if you could upload the dump file.

    You can use the Sky-drive to download the dump file. See the link for the steps on how to download Sky-Drive.

    Download pictures and files:

    http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

    The location of the dump file is C:\Windows\Minidump\.

    If the problem persists, or in the future if you face problems of Windows let us know and we would be happy to help you.

  • System will not start completely, blue screens and then restart

    Well, I need serious help. I have Windows 7 and installed Ubuntu on my XPS M1730. Yesterday my laptop shuts off and when I went to put it back on it would start start and then blue screened and restarted, continuing the cycle. I tried to use the system restore (Gets an error). I also tried to reformat using the Windows Vista disk that came with my laptop. It does not start, it just goes to the screen where I can choose between Windows 7 and Ubuntu. My friend is here and I'm on this laptop, and we wanted to play our game together. So please help quickly (if it is a command line or other) then we can game. Thank you :D

    To boot from a DVD, positioned on the BootOrder:

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to / stationed there.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • HP Pavilion DM4 1160us - blue screen with rays of light from above

    HP Pavilion DM4 1160us running Windows 7 Home Edition

    I was logged off system and on the rear connection, slider received rotation that never finished, connect.  EU force power off.  (When you start the system, received option 1) attempt to recover or 2) start as usual (same results for both).  Seemed to start as normal - then a progress bar display "loading files" - followed by blue screen (and big arrow cursor) - quick flash of a (too fast to read) command window.  The hard drive activity light was on during a few seconds, the flicker for several times, then went.  Nothing would happen ever after that it and the blue screen remained.

    I also ran well to launch HD diagnostic tests - he failed the extended test.  I removed the original drive Toshiba MK5056GSY and replaced by a 32 GB drive my old Dell Inspiron came with, run installation of a new operating system and the HP boot works fine (less the HP drivers).

    I have not yet tested the "faulty" drive but will be when I get an external hard drive case.  It lasted exactly 3 years.

    I would replace the drive with a WD7500BPKT drive that is 750 GB.

    My question is ' the computer/motherboard/BIOS Board will manage the bigger drive?

    A 750 GB hard drive should work fine.

  • Portege Z30-A-1E1 - blue screen and reboot

    Hello

    I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit.

    I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.
    In the event log windows that I can't find anything that clearly led to a cause.

    I use a Toshiba Dynadoc U3 and I first thougt she had something to do with it, but the accident occurs even if I use the laptop disconnected from him.

    Anyone had a problem like this?
    Any suggestions for debugging?

    Thank you very much!

    Hello

    I don't have a complete solution, but perhaps a step on the way.
    I would say first to disable the auto restart when a blue screen appears.
    This way the error message will remain on the screen until the PC is turned off.

    Know how prevents automatic restarts here:
    http://www.troubleshootwindows.com/w...-8-7-Vista-XP/

    Tom BR

  • Satellite L300:Blue screen and 'technical information' STOP: 0 x 00008086.

    Hello

    I have a huge problem with my laptop Toshiba Satellite L-300. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086.

    I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.

    I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
    What I do, he turns to blue screen with the same information.
    Tried to reinstall from the CD of restoration without success.

    Help would be massively appreciated.
    Saad

    Hello

    > Tried to reinstall from the recovery without success CD.
    In this case, it seems hardware problem.
    BSOD can be a product of memory problems. Try to delete a memory modules and test the laptop with a module in each slot. The two test modules.

    But this could be one of the possible malfunctions

  • Satellite L755 - 16L gives the blue screen and physical memory dump

    Please advice

    I bought my L755 - 16L in the month of August.
    Until last week it went very well.

    Last week I'm going to visit another country he only has the 240V voltage.
    Normally at home, I use 100V power supply for my laptop.
    After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

    Usually, I unplug the charger after the judgment.
    The next day if I start the computer, the computer gives the blue screen and physical memory dump.
    If not unplug the charger after stop down and don't use the next day then no problem.
    Please advice what can I do to stop this problem.

    This is the report of errors in Event Viewer.

    "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
    System

    -Supplier

    [Name] Microsoft-Windows-Kernel-Power
    [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

    Event ID 41

    Version 2

    Level 1

    Task 63

    Opcode 0

    Keywords 0 x 8000000000000002

    -TimeCreated

    [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

    EventRecordID 48763

    Correlation

    -Execution

    [ProcessID] 4
    [ThreadID] 8

    Channel system

    Computer toshiba-TOSH

    -Security

    [User name] S-1-5-18

    -EventData

    BugcheckCode 30
    BugcheckParameter1 0xffffffffc0000005
    BugcheckParameter2 0xfffff80003717ce5
    BugcheckParameter3 0x0
    BugcheckParameter4 0xffffffffffffffff
    Fake SleepInProgress
    PowerButtonTimestamp 0

    Hello

    In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
    Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

    I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

    BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

  • Satellite A200 - blue screen and reboots the system

    Hello!
    I have TOSHIBA Satellite A200-1IZ 8 months
    Since yesterday, when I close the FN at the bottom is blue screen and the system is restarted.

    How can I solve this?

    are you sure its done the FN key? It may be a RAM issue

  • Satellite 3000-214: after CPU upgrade no screen and no HARD disk activity

    Hey all,.
    I have a 3000-214 Satellite that comes originally with a PIII-M 933 Mhz. (SL5CG)
    http://videoff7.free.fr/sl5cg.jpg

    I ordered on eBay a second hand replacement (1133 Mhz) CPU SL5CK. (same number of pins, the same processor family: RH80530)
    When I go in, the laptop starts, but there is nothing on the screen and no HARD disk activity.

    So I asked the seller if he had tested the CPU, it sent, he said no and sent me 2 CPUs of replacement, another SL5CG and a SL64Z (which does not appear on the Intel site for some strange reason, but which is of the same characteristics as the SL5CG..)
    http://videoff7.free.fr/sl5ck.jpg
    http://videoff7.free.fr/sl64z.jpg

    The two processors give the same result with nothing on the screen and no activity of the HARD drive either.
    I checked my BIOS, it is the latest version: 2.30.
    Some laptops in the series 3000 Satellite (e.g. 3000-601), are delivered with a 1133 Mhz CPU (SL5CK) and also share the same bios exactly like my 3000-214. (upgrades to the bios on Toshiba website for my 214 & 601 are the same exact links and MD5 are equal). Also the 3000-601 & 3000-214 share the same chipset: Intel 830MP.
    But for some reason, it does not.

    EC which could I missed?

    It is always possible that all 3 processors that I was sent by the seller are dead, but it would be strange at this point, I think.
    So my question is, anyone have any idea what I might try to work or have experience with the upgrade a Satellite 3000 CPU?

    My warranty is looooong Sub anyway, so if a Toshiba employee could check in the basis of how fast max CPU can be used on the Sat 3000-214, I would be very grateful.

    Thanks a bunch for any info.
    Kind regards

    Alcahest

    Hello

    I studied a bit in the web and it seems that the Satellite 3000 has been bundled with Intel Mobile PIII 800, 850, 900, 1000 MhZ CPU

    I think that this will not work because of the speed of the CPU.
    In addition, I found this Toshiba document:
    http://support.toshiba-tro.de/KB0/FAQ5300W5000XR01.htm

    It is said that it is not possible to replace the processor in a laptop Tosh because processors are connected to the motherboard using a process called TCP tape carrier package.

  • iPhone 5 shows blue screen and restarts automatically

    iPhone 5 shows blue screen and restarts automatically

    1. try to do a reset by pressing home and off/power button together until you see the Apple logo, then release

    2. If you can't do it you may need to restore the phone via iTunes

    (1079)

  • 11.0 Adobe goes to blue screen and is now a flicker of the screen

    When I run adobe 11.0 that is loaded on the terminal, that he goes to the blue screen and now my screen flashes.   What should I do?

    Hi Bob,

    Thanks for posting in the Microsoft Community Forums.

    It would be more useful, me if you answer these questions.

    1 Windows operating system you are using?

    2. are you blue screen only with the Adobe program?

    I want the season to follow the article provided to solve the problem.

    Resolve system errors, freezes | Windows | Adobe software

    http://helpx.Adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-Windows.html

  • Update Windows xp caused my computer blue screen and now will not start.

    Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

    It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

    Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

    Ben River

    I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

    If nothing else works, try reinstalling your operating system. It worked for me.

Maybe you are looking for