HP Pavilion dv6 - 6052ea: fan of hp Pavilion dv6-6052ea does not

Similar Questions

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• The sound on my HP Pavilion G6-1a19wm does not work

  Hi the sound on my HP Pavilion G6-1a19wm does not work.   His "only" works when you use the audio plug with external speakers.   I tried to uninstall the driver, update the driver, microsoft fix - it and troubleshooting steps.  audio device present in the Device Manager and supposedly working properly, mute is "not"on."  visually everything audio related things suggest that the audio is fine and troubleshooting finds no problem... what else could it be?

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55036.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Pavilion dv6: laptop does not

  I was given a Hp pavilion Dv6 some time ago and I tried to run but I don't know what's wrong with him

  When I plug in the power ring lights and when I press the power button on the fan and other lights come on but the screen does not work. When I press Ctr alt delete it restarts and now the backlight of the screen lights up but nothing appears. When connected to an external monitor a cursor appears in the corner of the screen for a few seconds then disappears, I tried to put disc in there but I still nothing No bios or the empty start screen.

  Thanks in advance if you can help me!

• XJ437PA #ACJ: Pavilion DV6 - Audio does not

  Hello

  The audio has stopped working in my laptop since these days. It started with the audio does not not intermittently, but he has completely stopped working. I shared my PC specs below:

  Product name: HP Pavilion dv6 Notebook PC
  Product number: XJ437PA #ACJ

  Processor name: Intel (r) Core i3 CPU M 370 @ 2.40 GHz (2 400 MHz)

  I went through this forum and tried a few things:

  (1) to reinstall the codec IDT high definition

  (2) using the file available in the Recovery Manager

  (3) using the MicrosoftFixit

  But the problem is not yet solved.

  Can you please provide some suggestions?

  Thank you

  David

  Hi David,

  I would suggest you try a slight variation on the first two methods.
  
  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp47001-47500/sp47393.exe
  
  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.

  Right-click on the Audio display Intel entry and select uninstall - this time check the confirmation box to remove the driver and continue the uninstall.

  Then, right-click on the IDT device and select uninstall - for this entry, also check the box confirmation to remove the driver and uninstalling.

  Once completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation. Once done, restart the laptop.

  Any improvement?

  Best regards

  DP - K

• Pavilion dv6 Webcam does not?

  I have a Pavilion dv6-1030 ca laptop, and since a few weeks, I had trouble with my webcam. When I open the HP MediaSmart Webcam, I get the following error message: "no video device detected. Please connect a video device to your computer. If you are using a built-in camera, please make sure that it is turned on. "I have a built-in camera, and (usually) lights up when the webcam application opens. I am running Windows Vista with SP1 and tried many things to fix it, nothing helps. The webcam does not appear in the device, under imaging devices Manager, nor any of the Hubs USB root. So far I have tried:

  -Reinstalled the drivers of USB root hub

  -A tried to fix the solution in the BIOS (that another thread suggested)
  -A tried to use Recovery Manager to reinstall the driver (wasn't in the list)

  -The recovery disks created to solve the problem (it didn't)

  -Updated the MediaSmart Webcam software

  I'm at school right now, and I can't really afford to give my phone to obtain compensation for three weeks since I have exams coming. Any help would be appreciated! Thank you!

  Message edited by annabelle89 on 27/07/2009 20:30
  Message edited by annabelle89 on 27/07/2009 20:31

  Don't pay fees to repair overpriced... it happened to dv6 my boss, lift just the frame surrounding the top and sides.  You don't need a crowbar on the bottom of the frame.  Use your nails under the inside edge of the frame, they have adhesive tape double-sided, so it can be a little difficult to dislodge.  Lift slowly so that the band can separate on its own.  Don't force quickly or you could damage it.  Make sure you are not prying the metal frame silver of the LCD, only the black plastic frame.  There are hooks plastic that will make a click sound when you lift up the frame, it will need a strength, so don't be afraid if you hear the wink, he should be able to put it back together if you did it correctly, otherwise you will need to use some tape to tape the rear frame, better than paying $100 +... haha.  Once you have pryed on the top of the frame and have access to the webcam module, you should see the cable going into it from the bottom, push the cable into the webcam, then see if the problem is resolved, the cable most likely just came loose.  If that solved the problem, I suggest to use something you can remove, as hot glue to hold it together, just in case the webcam really needs to be replaced, you can melt the glue wide and swap out.

  If your microphone works very well and just the webcam does not work, then the problem is most likely a driver problem, or the webcam itself somehow has been damaged, which is highly unlikely.

• HP pavilion Dv6 laptop: does not start in normal mode, safe mode

  Hi all

  I have HP Pavilion DV6 laptop with windows 7 Home premium 64-bit OS. It was working fine up until two or three days.

  After that some software upgrades, it has stopped booting.   When I tried to start it in safe mode, it stops at disk.sys.

  I don't have win 7 OS CD or recovery CD.  So I downloaded the trail version of windows 7 SP1, I want to install this, but he is suspended the windows logo.  I Googled it has bitten, I loaded a linux kernel and access the hard disk.  I backed up all the files required by using this boot of linux.

  I don't know what to do now?  What is the problem with my system. When I ran the drive diagnostic. It was a failure. That means that I can't use this HARD drive?

  Any help is greatly appreciated.

  Concerning

  Stéphane

  Hi stephane,

  Well the error code certainly would indicate that the player began to fail, but just in case, you might try to wipe the entire hard drive first and then reinstalling the operating system as described below.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your Windows 7 installation disk will reformat the HARD drive.

  Insert this CD into your PC which is unable to load the operating system properly. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk and try to reinstall Windows 7.

  If it still does not work, I think your only option is to replace the HARD drive.

  Kind regards

  DP - K

• HP Pavilion dv6-3103sa: HP Pavilion dv6-3103sa does not then illuminate that plugged

  Hi - my HP Pavilion dv6-3103sa has recently developed a fault.

  It lights up with the power cable connected to it.  So that the laptop starts I have to first remove the power cable.

  Similarly, before you turn off the laptop, I need to unplug the power cable.

  If I leave it plugged in and turn off the machine, I can't start at all. The solution is to remove the power cable and the battery, then replace the battery only and then turn on the machine.

  I also noticed that with the removed battery and the power cable is connected, the laptop does not start again.

  Watching the light next to the power cord plug when plugged in the cable it quickly flashes of white, to orange, then back - tell me no power isn't learning laptop in this State.

  I also tried a different power supply with the same intensity from a mobile phone of similar work with the same results.

  Please notify.

  @ScatchyMonkey,

  Hello and thanks for the display on the HP support forums.  The problem you are having is with the motherboard.  There is a part that regulates the power and allows the system to know if it is connected or not connected and if it failed, you will need to have it sent repair.  Here is the link that will help you communicate with the correct service.

  Contact HP support.

  Thanks again for posting and have a great day.

• Pavilion dv9700: laptop does not turn on but lights flash

  I have a Pavilion DV9700, service tag dv9925r. When I turn on the power, the power led and the led on top flash, I can hear the fan and drive spinning, but the screen stays black and after one or two seconds the lights out, but then continue to Flash on then close. When, I hear the fan running.

  What I've tried;

  Hung still no display on an external monitor

  Removed and reinstall the memory and hard drive, not good.

  Tried the hard reset, not good.

  I put another hard drive just to see if the disc was not, but no difference.

  There is no audible beeps at all. It does not seem to go through the checkpoint.

  The laptop is dead?

  If this document does not help, contact the HP support directly using the link that I have referred to in the document I have provided.

• HP Pavilion dv7-4065dx does not start with continuous flashing capslock

  Hello

  I have a HP Pavilion dv7-4065dx laptop with Windows 7 64 bit that won't start or go to the Bios screen.  When the laptop is turned on, you hear the fan from the system start, start button / stop brighter lights and the caps lock button starts to Flash continuously once every three to four seconds.  The activity of the disc is also light on but with no flashing red.  No changes have been made to the laptop and it worked perfectly well a few hours earlier.  I tried the hard reset of the computer and the reinstallation of the memory cards, but the laptop would be still not start.  Any help to determine what the problem is with the computer would be greatly appreciated.  Thank you.

  HP Pavilion dv7-4065dx

  Product # WQ861UA #ABA

  It does not appear that a hardware problem has occurred.
  
  After reviewing the document for the blink code, it seems that the processor does not have.
  http://goo.GL/ipoGs
  
  A defective processor can be repaired by a local PC store, but I highly recommend you contact the HP support by phone to see what options are available. HP repair center would be able to identify the appropriate components that will need to be replaced in the rare case that the test gave flashing evil code.
  The number for the United States and the Canada is 1-800-474-6836.

• HP Pavilion p6-2054uk: HP Pavilion p6-2054uk does not start all of a sudden upward. Help, please.

  I hope someone can help here?

  I have a desktop HP Pavilion p6-2054uk (Windows 7 64 bit - i5, 3.00 Ghz - 6 GB of RAM) that I bought in 2012 and especially use of HP products.

  By starting my PC the other day, it will not start and crashes on the HP splash screen. When you press ESC, F10 and F1 and F8, it simply changes the screen to a black screen with 7 lines of text giving the details of my PC base on this subject. It should give me other optins at this stage, but does not work.

  The HP Pavilion p6-2054uk hard drive does not start even another hard drive OS I've tried from another computer with Windows 7 64 bit on it. Troubleshooting a few others, I even tried a fresh new hard drive in it with a new copy of Windows 7 64 bit to install into the CD Rom and it will not yet go through the HP start - that is abnormal screen since usually, it detects the Windows CD and install. Furthermore, fans in the PC work normal, as the eject the power of the PC CD ROM light is on too. I tried all the three available inside power cables and tried diferent nine cables sata/data and another monitor entry too, all to nothing done.

  The hard drive that was in the HP Pavilion p6-2054uk when he stopped to start up is fully accessible when placed in the other machine I have. Therefore, it is still operational.

  The notable thing only I did in the days before it were installing Adobe Creative Suite 6 but I do not think that it would cause a major problem like this, noting also that another hard disk OS (without Creative Suite 6 is installed) and a new facility wouldn't start either. Therefore, I am afraid a harware issue any.

  What could be going on here?

  Side for the second or 2 of optimism about the usual boot the PC normally makes noises, it looks like he died immediately after, suspended on the HP screen.

  Thanks in advance.

  R.

  Hi there @dougaljoe,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start and it is indeed suspended at the HP logo even with a different hard disk (with configured operating system) installed. I'm happy to help you with this.

  I suggest that you perform all hardware diagnostics in the BIOS/UEFI. Please also refer to the following, as it covers a range of start-up problems, and if you follow the symptoms you experience should be useful. It includes information on diagnosis.  Computers HP - computer won't start (Windows 7)

  According to you it might just be something easily replaceable, or something more simple to set, or in a worst case something requiring maintenance. If the worst case rears its ugly head, then try a hotline. Please use the following http://www.hp.com/contacthp and create a folder for your question and call HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html If all goes well, he will not come to that, but it is preferable to have the information if necessary.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion g6-1045ej: hp pavilion g6-1045ej does not start

  Hello.

  I use a HP Pavilion laptop 1045ej g6. The laptop is 4 years and 3 days ago, I replaced the cpu of i3 380 m to i7 640 m.

  After the repalcement of the laptop won't start, fans were whirring but the BIOS screen came. The Caps Lock key flashes at intervals of one, the wireless button is orange and that's all. Its been like that since.

  Any suggestions?, please help.

  Hi there @Mr_Potato.

  Let me welcome in the HP support community where you can ask questions, find solutions, and get help with problems you encounter. If my answer to solve your problem or answer your questions, please inform others that this answer was helpful by clicking on the accept button Solution.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops. The number of flashes of the sequence is 1 blink. This means that the processor is not functional.

  

  Source: computer does not start and emits a LED or beep Code

  You can try to reinstall the CPU and check all connections first of all to see if maybe it just has not read correctly, as you said you just replace the CPU.

  Although you had mentioned, you have replaced the i3 - 380 m with an i7 - 640 m. I found the CPU that came with the notebook in the table for the previous generation Intel® processors. Then, I checked to see what is compatible. Please look at HP Pavilion g6-1045ej Notebook PC Maintenance and Service of Guide on page 1.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem. If you need assistance I will gladly do everything I can to help. If you want to say 'Thank you' to my effort to help, please click the 'thumbs up' to give me a Kudos.

  Have a great day!

• HP Pavilion 15 laptop does not properly turned off

  Hi everyone, I am faced with a wireframe, annoying problem with my less than a month old HP Pavilion Notebook 15-p029tx.

  Sometimes, after pressing 'Shut Down', within the screen 2 seconds turns black, but the laptop would not extinguish itself, i.e. fan and power lights stays on always (once, I waited for 1 hour, like only the screen off & pc does not respond, occurs at the same time plugged / battery power). So, I press the power button for 5 seconds to turn it off. The next time he acts as restart, i.e. takes longer to boot and windows plays the startup sound.

  This kind of wired issue does not occur on every stop down. It happens probably once in two days of use. Standby, hibernation works very well.

  Configuration of the laptop: Pavilion 15-p029tx; 4 GB; Intel I3; 2GB NVIDIA; 8.1 Windows x 64 only language; 1 TB HARD DRIVE. Latest version of Windows, HP drivers, Antivirus updates are installed. PC is in good condition (defragmented HDD, registry, Ccleaner cleaning). Does not overheat is not possible: I have cooling pad and the weather is cold here.

  Steps I performed to fix the problem: Updated to latest Bios F.12; Reset bios default setting; made all the system from the bios, no found error diagnostics. Today, I run 10 stop test with different conditions, but it has never happened during the tests! Also all the usb ports give power during this gel.

  But I don't know, I would have to hold down the power button / stop again in the next two days.

  Experts please help me to resolve the issue, its very annoying when I'm in hurry, hurry to stop, lid closed, and next time, when I leave the laptop in the bag, it would always be running / power!

  Sorry for my bad English.

  I found the root of the problem. The culprit was Mcafee. After you remove Mcafee, it works well!

• My HP Pavilion dv5 1126em does not boot the system.

  My laptop does not continue to boot the system, when I press the button it starts feeding and then he shows me the HP logo in the lower left corner "Press ESC for Boot Menu" does not continue, and stop there and does not respond to any button only for the power button then it turns off, I tried everything. It happened after wile recovering the session of my recovery disk.

  Please help me identify what the problem is?

  I hope I'm wrong, but it is quite possible that your hard drive is damaged and must be replaced. I'll tell you why I think so.

  Last year at the end of December, I had the same problem with my HP Pavilion dv6. When I pressed the power button only the HP logo and the "press ESC for Boot Menu" appeared. I wasn't able to get into the BIOS or to do anything else. The laptop take-out hung on the HP Logo. I gave the laptop HP service and they told me that my hard drive has disappeared and they replaced. The strange was that my laptop was fairly new, I've had for 3 months. The good thing is that they have replaced the hard drive for free, because it was under warranty.

• Pavilion laptop g7 does not start

  I have a HP Pavilion g7-1167dx Notebook PC running Windows 7 Home Premium.  When I turn it on, the LED only lights are LEDs of power (on the power switch and side) and the network LED on the F12 key.  I am not able to enter the diagnostics of material via the F2 key.  The fan is operating normally. It was produced before intermittently, but I wanted to just wait awhile and it would eventually start again.  When he finally is never returned, I disassembled carefully, according to the maintenance and care, guide (on an ESD protection adequate workstation) and gave it a good cleaning.  It was very dusty inside.  Unfortunately when I reassembled it, it still does not work.  The computer is a little more than two years. Product number: LW414UA #ABA

  I sent the motherboard to repair parts of computer out of Miami, Florida and they fixed it and returned.  I was told it was the video chip.  They charged $70.00.  With each shipment way I got it fixed for $90.00.   Hallelujah!  With their setting of the original motherboard, I didn't have to worry about problems of CMOS and "tattoeing" a new motherboard, which would have cost a lot more.