HP Pavilion DV6-6110us: dead computer - CPU problem?

Similar Questions

• Can I replace a graphics on a HP Pavilion DV6-6110us

  I thought to do a new map to start to play a bit more "serious" games but my isent graphics quite up to standards of game. I have an AMD A6 - 3400 M APU with graphics HD Radeon (TM) card and the display adapter is AMD Radeon (TM) HD 6520 G 4 GB RAM Quad Core Windows 7 64-bit. HP Pavilion DV6-6110us

  Hello:

  They are just stuck hard there where they are.

  The only thing you can do is to ensure that you have the latest graphics driver installed for optimum performance.

  Paul

• HP Pavilion dv6 6120sb early and watch problem

  My computer HP pavilion dv6 6120sb laptop has a few problems:
  Sometimes when I push the power button it looks completely dead and I mean no response, no lights, no noise, nothing.
  I always have this problem when I just have it turned off.
  So when I wait for a while (from 2 to 20 minutes) it works again.
  But this isn't the only problem, when the screen turns off automatically it turns over when I move the mouse.
  And I can't get him out of sleep with an external mouse (own keyboard not responding any more) and no screen after waking up, but I hear it's there by a few windows sounds.
  Since I am a computer scientist, I totally disassembled the laptop 2 days ago and the problem has been resolved! Until today
  I removed the battery, pushed the power button for 20 years and even flashed the BIOS again by an official tool from HP but nothing resolved.
  My opinion is that there is a problem with the sensor cover (what seems to be a magnetic mechanism) or the card supply, but how can I solve it?
  PS: laptop is 2 weeks out of warranty and I really need it for school!

  Thanks to all who tried to help me.

  I solved the problem of deleting a component and making a bridge between the 2 contacts.

  As I thought it was the sensor cover on the power supply Board which is known as SW3.

  I measured all contacts of the component, and then the CRS gave me 3.3V, Out was only 1.1V (without a magnet).

  When a magnet was near him, has given to 0V.

  So I deleted the component and filled the will of the VCC. Now, I don't have any sensor cover more (I don't like on this subject) but my laptop working again as it should be.

  Contact me if you want more information.

  (The photo was taken before that I deleted SW3 and filled the 2 contacts on the left)

  

• Hard drive test failed on HP Pavilion dv6-1100eo laptop computer

  I have a HP Pavilion dv6-1100eo Entertainment Notebook PC (P/N: NR597EA) with Vista 32 bit.  Unfortunately no guarantees left in, and in general I was very satisfied with this laptop.

  But suddenly Wondows would not start up - and it has yet to start Recovery hard disk partition. As I didn't know if this start was on hard drive or not - I ordered the DVD of recovery system for this version of Scandinavian language.

  These discs didn't work - so I thought that I probably did not my homework before ordering these disks.

  So I ran Diagnostics System (even if I have an older version of BIOS F.03).  On the diagnostics - test hard drive fast and complete failed during the first 1% analysis.

  Is there something that can be done - or is the only option new hard drive? In the case - the what hard drive is recommended is too cheap - because I don't want to invest too much in a book soon 3 year.

  Recently I have bougth an external hard drive (1 TB) based on the USB connection. That allows bypassing the HD internal. In this way I would increase HD capacity and not invest more in this notebook - since I already have the recovery DVDs

  It's probably a matter of time before I go buy a new HP laptop - that is why I don't want any long standing patch this problem.

  Hello

  Sorry to say, but you won't be able to install or boot from external HARD disk Vista, so if you need to get the workbook, you will have to replace the internal drive.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 57 of your maintenance & Service Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

  Kind regards

  DP - K

• Ports USB 3.0 on HP Pavilion dv6-6015tx laptop computer

  I have a HP Pavilion dv6-6015tx-Notebook that I've upgraded to Windows 8.1 (transcript).
  Now my problem is that when I connect my USB 3.0 drive to my laptop the transfer speed is not more than 40-45 Mbps. So, help me and tell me which two ports are USB 3.0 ports in my laptop (that I'm not sure about that).
  Earlier, I used to get the speed of transfer of 90-95 Mbits / s, but after a few deiver updates and do not know what it has reduced.

  The usb 3.0 ports will be a symbol of the SS (superspeed) marked next to the USB symbol.  You need to install the usb 3.0 for Windows 8.0 driver (if available) for the performance of usb 3.0. I'll check to see if it is and provide a link.

  There is no driver for windows 8 usb 3.0 available for download. You may need to install Island version Windows 7 in compatibility mode. It may also be available via Windows update.

• Pavilion dv6 6130ew: resolution with drivers problem

  Hello. I had the problem after reinstallation of the system. I can't change the resolution higher than 1024 x 768. I tried the drivers from the site

  http://support.HP.com/pl-PL/drivers/selfservice/HP-Pavilion-DV6-6100-entertainment-notebook-PC-serie...

  All else fails... and last I can't download yet. I can't double-screen HDTV without a driver. It's irritaiting. Can someone help me to solve my problem?

  Hello:

  According to the specifications of product for your laptop, this should be the correct graphics driver you need that installs the switchable graphics drivers the Intel and AMD...

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp55092.exe

• HP Pavilion DV6-6031eo - black screen (backlight problem)

  I ve bought a new laptop Pavilion DV6-6031eo 2 weeks ago, and it worked fine until today.

  The question:

  When I turn on the laptop, it starts as usual and the system works perfectly, but the screen is black, so I can´t use it, unless you use another monitor, think I Don t want to. I think it has something to do with the backlight, or perhaps the retroeclairages cable routes.
  HP logo at the back of my screen used to light up when I turned on my laptop, but now it s too messed up.

  No backlight and no light in the HP logo.

  I ve sent an email to HP TotalCare, since I got my warranty (lasts 1 year) and I would like to know if they will cover it.

  Hopefully, I will get a response as soon as possible.

  Thank you.

  PS: Sorry for my bad English. I m of the Denmark, so it s not my mother tongue.

  Hello

  Guaranteed that you have on this model it will cover for you and your English is very good.

• Touchpad HP Pavilion DV6-6110us problem

  After a recent update, I can no longer use the square in the upper left corner of the touchpad to turn it off.  How can I re-enable this feature?

  Hello

  Try to reinstall the Synaptics driver as follows.

  Download the installer from Synaptics of the page on the link below and save this to your downloads folder.

  FTP://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52661.exe

  Then, open windows control panel, open programs and features, make a right click the entry for the Synaptics Pointing Device Driver and choose uninstall.  Once done, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Yet once, once done, reboot the laptop.

  Kind regards

  DP - K

• HP Pavilion dv6-6135dx USB 3.0 problems

  Recently bought this laptop, I like it, it works fine.

  I reformatted about the day that I got this laptop. However, I can't get USB 2 ports on the left side of the laptop to work, I guess it is the USB 3.0 ports. The two USB ports on the right side of the laptop work well, I guess they are USB 2.0 ports. It's probably missing drivers.

  I tried to download Renesas Electronics USB 3.0 host controller driverthe HP support Web site. It does not work. After installing and running the utility USB 3.0 host controller that it installs, a small dialog box appears which says 'not found USB 3.0 host controller '.

  In Device Manager, I have two devices that have yellow exclamation points. One is listed as Controller of Bus SM, the other is listed as unknown device. The hardware ID for those who are:

  SM Bus controller:

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C & REV_13

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  Unknown device:

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Windows Update cannot find something for these two. I also tried to manually select the following drivers for the unknown device and the unit still does not start:

  1. Renesas Electronics USB 3.0 Host Controller

  2. Renesas Electronics USB 3.0 Hub

  3. Renesas Electronics hub USB 3.0

  4. Renesas Electronics USB Hub

  Although I'm not too worried about the SM Bus controller, mainly because I have no idea what its purpose is, I suppose that the ports USB 3.0 is the unknown device because of the hardware ID. Help please!

  The problem is that HP is not labeled correctly pilots. USB 3.0 drivers they have under "Chipset" do NOT allow the ports under Windows 7 on the DV6-6135DX. I discovered this way lasts as well as others.

  I replaced the hard drive and decided to use a generic version of Windows 7 to avoid the HP bloatware. After installation, port USB3 drivers have not been installed and install the package of the chipset section has nothing. Then I found a thread at Notebookreview.com where someone told me where were the USB drivers.

  The drivers for the USB 3.0/chipset ports are rolled in the driver VIDEO package. After you have installed the package of video drivers, my USB 3.0 ports worked. I then installed a video driver up to date from the AMD website and I'm good to go.

  Nowhere on the HP driver page it mentions that USB 3.0 drivers are actually part of the package of video drivers. I had to find the info from a thread at Notebookreview.com. Do not this way. HP should be out pilots in 2 packages and put them in the appropriate section, or put some type of ticket in the chipset section on where the chipset drivers are really.

• HP Pavilion DV6 3030tx entertainment laptop - heating problems!

  Everyone with this laptopn is having the same problems as me?

  It seems that this laptop is to reach dangerously high temperature of 65 degrees celcius (when I play games) that will certainly shorten the life of my laptop in the long term for sure. I even bought a portable Zalman NC1000 pad cooling and reduced only by about 2-10 degrees! I tried a friends laptop Samsung and it was as cool as a cucumber! What is going on?

  I really don't want to have it send for repairs in the next year or have to buy a new computer, I'm short of funds as it is!

  65 degrees Celsius is not a dangerously high temperature. I have core i7 at 40-45 degrees idle if you play games 65 degrees is a very good value. I saw 60 to 70 degrees during the compilation of a program of 65 degrees is a common value when you play. Do not worry..

• Pavilion dv6-2140ei. Missing driver problems and blue screen.

  Hi, I'm florent

  I have problem devices on my PC which I think might have caused the blue screen issue.

  Base system device:

  1. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 03E4
  2. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 04E4
  3. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 01E4

  MEDIA:

  1. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0001
  2. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0101
  3. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0201
  4. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0301

  Unknown device:

  1. ACPI\ENE0100\4 & 23038812 & 0

  Please help, I would really appreciate it.

  Hello:

  Here are links to the drivers you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75510-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75076-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

• Confusion of LCD for DV6-6110us part number

  I need to replace the LCD of the HP Pavilion DV6-6110us laptop computer.   I'm not sure of the correct reference number or if several different reference numbers can be used.   The manual indicates 640445-001 HP or HP 653378-001 can be used.  It is not clear on the question of whether the two can be used or when the other is needed.   When the disassembly of the screen on the screen part number is 666933-001.   All three can be used.  New pilots will be needed for any of them.  I already ordered the HP 653378-001 and want to be sure that it will work before you start the installation.    Thanks in advance for any guidance.

  john_a_joyce wrote:

  I need to replace the LCD of the HP Pavilion DV6-6110us laptop computer.   I'm not sure of the correct reference number or if several different reference numbers can be used.   The manual indicates 640445-001 HP or HP 653378-001 can be used.  It is not clear on the question of whether the two can be used or when the other is needed.   When the disassembly of the screen on the screen part number is 666933-001.   All three can be used.  New pilots will be needed for any of them.  I already ordered the HP 653378-001 and want to be sure that it will work before you start the installation.    Thanks in advance for any guidance.

  Hello

  You don't have to worry on the part numbers. 640445-001 is a resolution screen 15.6 "common, but the 653378-001 is a full HD screen which is much better than the other. You will not need all the drivers when the operating system detects the new the old driver installation screen (adjusts automatically the required parameters) must manage the new resolution.

• Problems with the DVD on Pavilion dv6-2010sa

  HP Pavilion dv6-2010sa laptop computer (under Windows 7 x 64), I bought less than a week ago.

  I started the disk recovery software to back up my OS in the event of future disasters.

  I used a DVD + disc, so it would take 3 discs to do the recovery disks.

  First DVD completed successfully. Software asked me to enter the disk 2.

  This is where I started to have problems.

  Drive recovery software couldn't recognize my blank dvd +.

  The drive makes a lot of noise, but then stopped making noise.

  I tried a few other DVDs +, but to no avail.

  I rebooted the computer laptop and tried but same problem.

  So I tried to play a dvd movie to see if it was the disk recovery software or the dvd player.

  He would not play a dvd movie.

  I also tried to play an audio CD but the same problem.

  The drive icon appears in Windows Explorer, but does not display any info (or open the CD / DVD) when I have a CD or a DVD in there.

  So it seems to be a problem with the DVD-> grateful not any CD / DVD

  If someone can advise?

  PS. I searched the driver DVD (so I could Reinstall driver) but the HP Web site does not contain the driver for 2010sa (DVD software only)

  Thanks in advance

  Gary

  Problem solved.

  Uninstall the device dvd player:

  -Device Manager > do a right-click post dvd/cd player > uninstall the device

  Restart the laptop and OS will reinstall the driver and the DVD/CD drive should start working again (well this is what has happened to me)

• HP Pavilion dv6 5CH1342RW4: maximum capacity of RAM and GPU compatible

  I have a HP Pavilion dv6 5CH1342RW4 laptop computer Intel Core i7-2670QM CPU @ 2.20 GHz.

  What is the maximum RAM of my laptop? It came with 6 GB (2 GB SODIMM ELPIDA 1333 MHz
  4 GB SODIMM Micron), now I want to upgrade.  It will be up to 8GB, 16 GB, or even?

  And on my his AMD Radeon HD M 7400 gpu. I would also like to update in a more advanced gpu. What are the compatible gpu for my laptop?

  Hope to here from you soon guys. Thank you!

  8 GB (2 x 4 GB modules) is your maximum memory and there is no way to upgrade the GPU. It is soldered to the motherboard and cannot be removed or replaced. The numbers you supply are not portable or product model number we would need for more specific information. There may be another motherboard that you could install which would have slightly better graphics, but it would be, at best, a slight improvement for a significant cost and hassle.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion dv6-7135nr: loss of network connectivity and wireless after upgrade to Windows 10 cable

  After the upgrade to Windows 10, I lose network connectivity after a restart of the computer.

  The operating system fails to load drivers Broadcom 4313 n. The driver date is May 8 202. The reason code is 31 on failure to load the drivers.

  I returned to Windows 7 and migrated to Windows 10 several times with the same result. I tried to upgrade on the Broadcom drivers, but Windows says they are up-to-date.

  I also see that the Realtek PCIe GBE Family Controller is having the same problem.

  I think it's a driver problem, but cannot find the correct set of drivers.

  Any help would be very useful. I have just re-upgrade to Windows 10 and have network connectivity.

  Hi @karbacdb,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-7135nr Entertainment Notebook and problems with connectivity Wireless Windows 10. You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  Here is a tool of Broadcom for Windows 10 drivers that could help.

  Windows 10 drivers are available through Windows Update. Please be aware that HP does not Windows 10 drivers will be available from Windows Update.

  Please let me know how it goes.

  Thank you.