HP Pavilion DV6-6C29WM / USB port issue

Similar Questions

• HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

  My HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

  Windows 7 64 - Bit on 650 GB of disk.

  Error: "the system support does not support this computer. You are not able to restore the system with the media. »

  I'm about to order the recovery disks from HP and with a bit of luck, being able to bring this notebook to conditioning factory with all the correct partitions and sizes, after that I have format the hard drive.

  Yes, our recovery disks will return your device to factory State. All the software that came with the unit will be resettled. What you have added, you have to reinstall.

• Pavilion dv6 - 6020ca: dv6 - 6020ca USB ports not working not

  I recently spent Win10 to Win7, and my USB ports no longer work.

  The Device Manager has an error for all USB controllers listed which reads "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried to update, uninstall etc via the Device Manager with no luck.

  I also tried to go to the HP Software and Driver Downloads page, but it lists only a USB 3.0 chipset. Mine are 2.0.

  Any help is appreciated. Thank you.

  p/n: LM198UA #ABC

  Hello

  Possibly, it can be repaired in the Windows registry.

  http://www.tricksguide.com/solve-Device-Manager-error-code-39-on-USB-controller.html

  Concerning

• Pavilion 17-g192dx: USB Ports not recognized

  Hello

  I have a HP Pavilion 17-g192dx that's installed with Windows 10 factory. I decided to give the new operating system a go, but was overall very satisfied with his overall performance and updates of buggy. Not wanting to give up the new machine, I decided to bring it back and oldie but a goodie - Windows 7. I got a copy of Windows 7 Home Premium lying around so I gave a go and installed the operating system. I got the internet running successfully and in no time most of my drivers have been installed. The problem that I face now is that the old BONES will not work with my USB ports. I do not use a hub and have almost exauhsted the drivers for this Web site section. If someone wants to kindly point out how I could go about fixing this issue, any help would be much appreciated.

  I'm not as interested to get back to Windows 10. It is too slow for daily use (ma) and buggy.

  Thanks in advance!

  Hello:

  Download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

• Pavilion dv6-6b25tx: how to change pavilion dv6 6b25tx usb 2.0

  Hello, I have a pavilion dv6 6b25tx laptop computer with Windows 7 64 bit is installed. As I don't have smart card expansion slot in my laptop, how I going to USB 3.0?

  Hello

  Well, you must then replace the motherboard. I don't think you would spend up to $400 to get some USB 3.0 ports when you can buy a new machine with USB 3.0 ports already with that amount of money.

  Kind regards.

• HP Pavilion dv6 - 6123cl: HP Pavilion dv6 - 6123cl - USB driver problems

  Hi all

  I tried to find a way to solve the problem I encounter without success, so I decided to join this community and hope that someone else came across something similar and has been able to solve.

  I have two identical HP notebook computers (HP Pavilion dv6 - 6123cl) and both of these computers have exactly the same problem. After you have reinstalled Windows 7 for some reason any USB ports on the left side of the laptop are not recognized by Windows, leaving me with only 2 USB ports available. I downloaded and installed all the official drivers from the HP site but the problem remains still. Device Manager will not find the drivers and it drives me crazy because all the USB ports on both computers worked very well so far. What am I supposed to do?

  Any help or suggestion is highly appreciated.

  You are the very welcome.

  Download and install both of these drivers and restart.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5098226&swItemId=ob_118744_1&swEnvOid=4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5098226&swItemId=ob_123787_1&swEnvOid=4058

  Do you need the SMBus Controller driver too?

  If so, see if it works...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

• Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

  Hi all

  Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

  Win 7 64 bit

  HP Pavilion Slimline desktop computer

  Help!

  Update: I did troubleshoot a HP check and update driver.  The screen messages

  USB root hub: this device does not work correctly.

  The current tab:

  Generic USB Hub (6)

  1 port available

  Power required: 0mA

  Solved.

  I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

  I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.

• HP Pavilion dv6-6135dx USB 3.0 problems

  Recently bought this laptop, I like it, it works fine.

  I reformatted about the day that I got this laptop. However, I can't get USB 2 ports on the left side of the laptop to work, I guess it is the USB 3.0 ports. The two USB ports on the right side of the laptop work well, I guess they are USB 2.0 ports. It's probably missing drivers.

  I tried to download Renesas Electronics USB 3.0 host controller driverthe HP support Web site. It does not work. After installing and running the utility USB 3.0 host controller that it installs, a small dialog box appears which says 'not found USB 3.0 host controller '.

  In Device Manager, I have two devices that have yellow exclamation points. One is listed as Controller of Bus SM, the other is listed as unknown device. The hardware ID for those who are:

  SM Bus controller:

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C & REV_13

  PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  Unknown device:

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Windows Update cannot find something for these two. I also tried to manually select the following drivers for the unknown device and the unit still does not start:

  1. Renesas Electronics USB 3.0 Host Controller

  2. Renesas Electronics USB 3.0 Hub

  3. Renesas Electronics hub USB 3.0

  4. Renesas Electronics USB Hub

  Although I'm not too worried about the SM Bus controller, mainly because I have no idea what its purpose is, I suppose that the ports USB 3.0 is the unknown device because of the hardware ID. Help please!

  The problem is that HP is not labeled correctly pilots. USB 3.0 drivers they have under "Chipset" do NOT allow the ports under Windows 7 on the DV6-6135DX. I discovered this way lasts as well as others.

  I replaced the hard drive and decided to use a generic version of Windows 7 to avoid the HP bloatware. After installation, port USB3 drivers have not been installed and install the package of the chipset section has nothing. Then I found a thread at Notebookreview.com where someone told me where were the USB drivers.

  The drivers for the USB 3.0/chipset ports are rolled in the driver VIDEO package. After you have installed the package of video drivers, my USB 3.0 ports worked. I then installed a video driver up to date from the AMD website and I'm good to go.

  Nowhere on the HP driver page it mentions that USB 3.0 drivers are actually part of the package of video drivers. I had to find the info from a thread at Notebookreview.com. Do not this way. HP should be out pilots in 2 packages and put them in the appropriate section, or put some type of ticket in the chipset section on where the chipset drivers are really.

• Pavilion slimline s3760in: usb ports and the Internet connection

  Hello

  I use my hp pavilion slimline s3760in pc for about five years. Recently my hard drive failed and I had to replace.

  Everything was going well until my pc stopped recognizing all the same usb ports in BIOS mode on many occasions (he only recognized usb keyboard sometimes). Finally I have reset factory. The Usb ports now generally work fine, but now when I connect to the internet, none of my browsers can disply any page, even other programs cannot connect to the internet, although it shows that I am connected to the internet.

  Is it a hardware problem or just windows?

  Hello again @vr46,

  Thank you for the updated information. I'm you provide a HP support document: Broadband Internet Connection to a dispute (Windows Vista), which has the troubleshooting steps you need to solve the problem you are now facing. I suggest that you take the time to go on the document and apply the suggested steps.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a wonderful day!

• Pavilion g6 1307ex: usb port

  There are 3 usb port on my laptop.but 2 has been corrupted. can fix the usb port? I want to say can I replace the usb port goes shop of any laptop? Please answer me it will help me and others.

  USB ports do not corrupt. They are the hardware, not software. They may be physically broken or traces on the motherboard of the laptop may have on topical issues.

  Some owners of notebok abused usb ports by forcing a connector inside, that infringes on a physical port.

  Broken usb ports require a complete replacement of the motherboard of the laptop to solve the problem. They are integrated on the motherboard and are not a separate part.

  So, no, you can't repair a usb port.

  The drivers for the ports, which are software may be damaged. A driver problem is usually quite simple as a matter of relocation.

• Pavilion 17-f049nd: How can I know if my HP Pavilion has 3 USB port?

  Device Manager says my laptop has a Pavilion AMD USB 3.0 eXtensible Host Controller - 0100 (Microsoft).

  Does that mean my laptop has 3 USB ports?

  Does that mean anyway?

  E - rik

  Hello

  Yes, this means that your computer has one or more USB 3.0 ports. Do not help the specs:

  http://support.HP.com/us-en/product/HP-Pavilion-17-notebook-PC-series/6936220/model/7185821/document/c04343468/

  But you can check out, USB port symbol SS nect him (SS is Super Speed I think). Based on his guide, he has 1 port USB 2.0 on the right and 2 ports USB 3.0 on the left:

  

  USB 3.0 ports give much better speed on USB 2.0

  Kind regards.

• Pavilion dv7: 2 usb port does not

  Hi, two of my three usb ports don't work or devices recoginse (both right), but the one on the left recognizes all the devices, I plug.  How can I get the two on the right side works correctly?

  Concerning

  Hello

  are a 4 USB 2.0 ports.

  • 4 USB 2.0 ports (4th port shared with eSATA)
  • 1 eSATA + USB port (left port)

  HP Pavilion dv7-4131sa Entertainment Notebook PC product specifications | HP® Support

  The difference is that the ports on the left are integrated on the motherboard, rights USBports are a card with a cable that can be replaced in case of failure.

  If you have a distribution of Linux (Ubuntu, Mint...)  You can use it in live mode (without installation) to test the USB ports

  Manual (page 80-81)

  http://h10032.www1.HP.com/CTG/manual/c02642701

  related topic

  HP PC - troubleshooting connections USB (Windows 7) | HP® Support

  

• Pavilion dv7-7071sf: USB port does not

  Hello!

  First of all, I apologize for my poor English, hope that you carry a grudge on me on this subject.

  I accidentally deleted the bios battery connector yesterday while I was remove my computer (cleaning with dry of butane air blower and replace thermal paste), so the bios reset...

  After that, the USB ports on the right were not functioning more, IE. they always provide the power for any USB device that them are attached (tried with fan, external hard drive and mouse), but does nothing else (mouse not working not, disk appears not, no sound windows indicating a device has been connected...).

  Here is a list of the things that I tried to fix it:

  • Disassembled my computer again to check if I have everything connected correctly
  • Removed the battery and the cable and held the power button for more than 1 minute and a half
  • Update the drivers (Intel Download Center expandable 3 USB host controller driver)
  • Removal of windows drivers to install its generic those
  • Restore my computer at the time when I had everything working well.

  None of these manipulations worked, and the right usb ports (two usb 3.0) were still not functioning while those on the left (usb 2.0 and usb 3.0) were.

  I assumed it was a matter of windows, so I tried to format my hard drive, using the tool of recovery (F11).

  As for now, complete recovery, windows is installed, but all ports (left and right) are no longer.

  They still offer a power of my devices, but won't fire any action of windows.

  I'm in the show right now the updates of windows, but I don't really expect a lot from him.

  How can that being said, I solve this problem?

  I would appreciate your help on this,

  Thanks in advance.

  HP Pavilion dv7-7071sf (almost 3 years years).

  Using 64-bit windows 7 OS.

  Disk used: Western Digital USB 3.0 compatible with USB 2.0.

  Used the mouse: the mouse Bioxar.net & Steelseries (call of duty Black Ops II)

  Hey once again!

  Thanks again for your help freedomwarf (and all those who have spent the time to read this topic), the problem has been resolved.

  A friend told me to make a CMOS clear, which I planned to do, but I have not found the mutator.

  What I found instead was me forgetting to plug in the data cable to the motherboard (only the power of one was linked in).

  Thanks again for your help!

• HP Pavilion p7 - 1447c: replacement of HP Pavilion p7 - 1447c USB Port before

  My front USB ports have collapsed.  First of all a =, then the other.  Blue 'key' fell first and without these pins are bent too far to align correctly.  I would like replacement unit part number  I think install should be simple enough.

  Here is the list of partsurfer of part numbers.   Remove the front cover Assembly as shown on Pg 3 and look at the module.  Is this it?   The part number is shown on this page.  HP7-1400 uses the same module, Ebay $ 30

• HP Pavilion g6: My USB ports are no longer works. Can anyone share their expertise?

  I'm going to design mananger and it shows a yellow typical mark next to the universal serial bus. I tried to update the driver but there no driver not installed.

  Hello, I have restart my PC and restore it to its original from the manufacturer. I lost everything on my computer, but it's ok now, my USB ports are working properly. Thank you for your help.