HP Pavilion DV6: error disk 3F0 and hard 3F1

Similar Questions

• HP Pavilion dv6-1277el blue screen and disk hard error 303

  Hello

  I have a HP Pavilion dv6-1277el with Windows 7 installed. For some time the laptop crashed several times with blue screens until one day windows no longer starts or is is stuck on the loading screen.

  I used an Ubuntu live CD to backup data to the HARD drive of the laptop on an external drive, but after that transfer a large amount of data that I received a warning ON impending drive failure due to reassign areas.

  Restarting the laptop I received the following message from the HP auto test:

  Hard drive 1 fast (303)
  Hard drive 1 full (305)

  The strange thing is that, after the first time that I had these messages, Windows rebooted to work without any problem and I've never had any blue screen again.

  What should I do? Anyway to change my HARD drive or her trust?

  Thank you

  Hello new solvayhütte.

  Probably, he continues to work because it detects a problem with the drive.  However, the reader may not be totally dead immediately.  So now is the time to get ALL the data that you want out of the disc before it goes bad.

  You have two options currently.  You can replace the drive hard yourself (it is not difficult) or contact HP for a repair.

  To replace the drive hard yourself, you can use your notebook PC Maintenance and Service Guide for instructions on disassembly of the laptop.  There are also specifications stating the hard drive inside your laptop.  Use this information to buy a new hard drive and compatiable.

  If you do not want to replace the drive yourself, you can contact HP and inquire about a repair.  If you are within the United States or the Canada you can call to the 1-800-474-6836.  However, if you are outside this area, you will need to go to the HP support site for the contact information for your region.

  I hope that this information has been useful.  Have a great day!

• I have a Pavilion dv6. The test of hard drive reads: SMART Long DST passed, short DST passed, and failed.

  I have a HP Pavilion DV6 and it will DISPLAY, allow me to connect, and then reading welcome with the busy symbol, then the screen goes black.  My pointer always recognizes the touchpad and moves accordingly.  I've performed memory tests and received the following errors

  Failure ID: PU56W2-5KL62G-XD0141-61F103

  Product ID: LK469UA #ABA

  Hard drive 1

  Test drive: FAILURE

  It comes after the memory test, said this lower slot 2 failed.  I don't know what happened, but I want to be sure, I replace the components just before that I'm going to spend a lot of $.  All the tips are greatly appreciated.

  The hard drive LK469UA ID is used in the HP PAVILION DV6-3236NR NB PC US

  Assuming this DV6 is an American product, it's DV6-3236NR specifications

  There's an alert about the products of hardware for the DV6-3236NR, for the SATA (Serial ATA) hard drive controller here.

  "... Serial - ATA (SATA) ports in chipsets can degrade over time, that may affect the performance or functionality of the SATA-related devices such as disks, hard and DVD players. »

  The problem with models sold by little close before March 2011, including "fourth to sixth digit of the serial number are digitally"107"or less" effects AND where ' is the name of the chipset in the Device Manager... ".  "Intel (R) 6 series/C200 Series Chipset Family.    There are other caveats.  Not all of these DV6 have been affected.  HP and can still have a replacement

  "If you have an HP computer with the affected chipset, HP recommends that you contact HP support for service solution-join and receive the update free of charge for you."

  See the link above for more details.  We will this rule first and then move on.

• HP Pavilion DV6 6053ea - SSD SATA III HARD disk? & HARD drive space gone?

  Hello

  I have a HP Pavilion DV6 6053ea. It works fairly well, but I think I have an SSD would really speed up the loading of programs and start etc. I'm not so sure that the upgrade. I read on a thread if I had Port SATA 1 6 Gbps Supported or SATA Port 0 6 Gbps then my cell phone was good for SATA III. Is this the case? Joined a program hwinfo32 image, can you check if my phone would support SATA III?

  

  The other issue is my HD. My laptop says I have 750GB HD coming to about 700 GB after formatting. But my laptop seems to have only a total of 350 GB with all sectors added together. Where is the space?

  

  Hello

  Yes, your laptop has 2 ports SATA 6 GB/s (SATA III) most likely the hard drive and an optical drive are connected on it. There are also 2 SATA 3Gbps ports but not in use, I guess.

  The other issue is that there are 4 partitions but the partition 0 is strange and shouldn't be there. There should be a small boot for Windows partition (for BitLocker etc.), drive C: with Windows, D: drive with a partition recovery and partition Tools HP QuickWeb and some diagnostic utilities. It seems that the recovery partition is missing, the C: drive has been decreased and then created a small partition at the beginning of the hard disk. Take a look at disk management in administrative tools in the control panel this partitioning is on the hard drive.

• HP Pavilion dv6: recovery disks ordered HP but recovery is a FAILURE...

  The hard drive failed on the laptop and I got a replacement after all operations of chkdsk drive, which has been formatted without problem in the initial recovery stage.  Classified into recovery disc for HP Pavilion dv6.  Insert the first disk and everything goes OK.  Load the 2nd disc and everything seems to be OK.  Load the 3rd disc (Supplemental) and everything seems to be OK.  Laptop restarts for the first time, starting Windows starts, starts the Software Installation section.  2nd restart start automatically then start Windows appears.  Additional CD is drive all the time.   The Recovery Manager window appears and indicates "recovery has failed.  Select one of the following buttons:...  Now, I save the log.  The log file is saved as. HP_SSRD_LOG SRD.

  --------------------------------------------------
  [17:47:22.78] enter audit OS Edition...
  ----------------------------------------
  [17:47:22.80] check RStone.ini file to determine the required edition.
  [17:47:22.83] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [17:47:22.85] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [17:47:22.86] current edition is [HomeBasic]...
  [17:47:22.86] [start] necessary. Don't need to upgrade...
  [17:47:22.88] [Starter] needed...
  [17:47:26.67] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [17:47:26.67] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  --------------------------------------------------------------
  Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
  [17:48:11.96] ------------------------------------------------------------------------------------------
  ...
  CTO error condition has been undergoing dtected [update Factory]! ***
  [17:48:11.96] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [17:48:11.97] ------------------------------------------------------------------------------------------

  [17:46:33.77] Start BBOffline.cmd...
  UPDrv = [C:]
  [17:46:33.80] value UIA 951 error Code
  [17:46:34.36] WinPE is 32-bit.
  [17:46:34.36] start [corrections].
  [17:46:34.39] ---------------------------------------------------------------------
  [17:46:34.39] FixUps.cmd...
  [17:46:34.39] create overall progress information...
  [17:46:35.75] complete FixUps.cmd...
  [17:46:35.75] ---------------------------------------------------------------------
  [17:46:35.75] start [Tweaks for SDRD].
  [17:46:35.77] ---------------------------------------------------------------------
  [17:46:35.77] SDRD Tweaks to change the regional settings default user...
  [17:46:35.77] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [17:46:35.89] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
  [17:46:42.32] ---------------------------------------------------------------------
  [17:46:42.33] start PININST.exe for offline...
  Housing starts [17:46:55.19] [Sleep 10 sec].
  Starting price [17:47:05.28] [creation RStoneFUpdate.INI].
  [17:47:15.00] start [create 1 GB Pagefile for offline].

  Volume in drive C has no label.
  Volume serial number is 4CE2-BE2D

  Directory of C:\system.sav\bbv

  12/26/2014 pagefile.sys 1 073 741 824 17:47
  1 file (s) 1 073 741 824 bytes
  0 44,734,984,192 dir bytes free
  [17:47:15.06] the mark detection.

  [17:47:15.30] ---------------------------------------------------------------------
  [17:47:55.53] Start SysID Check...
  [17:47:55.98] Start Option control code...
  SKU_DEF_COUNTRY = [244]
  SKU_DEF_SYS_LOC = [en]
  ------------------------------
  Reset the country in administrator...
  ------------------------------
  ------------------------------
  Reset the default user countries...
  ------------------------------
  ------------------------------
  System reset located
  ------------------------------

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  Statement of the international settings offline.

  By default system UI language: en-US
  Settings system locale: en-US
  Default time zone: Pacific standard time
  The settings for the default user regional: en-US
  Location: United States (GEOID = 244)
  Active keyboard (s): 0409:00000409
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed the language (s): en-US
  Type: Fully localized language.

  The operation completed successfully.
  ------------------------------
  Updating the system locale info...
  ------------------------------
  [17:48:06.81] Start PIN Tweaks...
  [17:48:06.85] ---------------------------------------------------------------------
  [17:48:06.85] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] Tweaks to Unattend.xml of OOBE
  [17:48:06.85] to pick up the right file...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] rename unattend.org to unattend.or_
  [17:48:07.01] ----------------------------------------
  [17:48:07.01] without light sensor...
  [17:48:07.03] ----------------------------------------
  [17:48:07.04] it is restored by SDRD [SSRD.flg] image...
  [17:48:07.04] ---------------------------------------------------------------------
  [17:48:07.07] Start MIR Tweaks...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.12] [MIR Tweaks]...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.15] starting factory updates...
  [17:48:09.10] installation start QFE offline...
  [17:48:11.78] PININST_OFF: PAST...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
  Result = PAST

  [17:48:11.86] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.88] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [17:48:11.88] FUList.log to check if there are double Desc...
  No duplication.
  [17:48:11.96] duplicated No. Desc is located... PAST.
  [17:48:11.96] there was no update from the factory...

  With all due respect this FYI is a user forum if we don't remember that. If you had problems and did not keep telling them something is wrong and also I and others here have no proof of your experiences. And since you threw the material person else or HP can help you now.

• Partition recovery Pavilion DV6 or disks back to factory settings?

  My girlfriend has the laptop Pavilion DV6 with Vista. She is not a computer person, so there is no serious problems it is locking up and goes really slowly. I'll get his PC to the factory settings, the problem is there is no disk and I don't know where the program is placed on HP systems. Is the partition on the HARD drive itself reovery or can I get HP support discs?  Thank you

  Hello

  First of all: you can check in Windows Explorer to see the existing of a recovery partition. If it does not exist, you can restart the PC/laptop. HP welcome screen, press the F11 key to start the recovery process. Follow the instructions on the screen.

  Otherwise, you can order a set of recovery dicses of HP through this:

  http://support.HP.com/us-en/document/bph07143

  Good luck

• HP-Pavilion dv6-3127dx laptop / Laptop drive hard test failed

  HP-Pavilion dv6-3127dx laptop / Windows 7 Home

  My HP-pavilion laptop refused to start today displayed the following error message;

  Your hard drive has failed/Failure Error ID - 60DV64-5B16S0-XD003F-60XQ03

  I tried to turn off and restart it again and it worked this time, in any case, I tried to start the diagnosis tool and got the following results;

  Your hard drive has failed/Failure Error ID - 60DV64-5B16S0-XD003F-60XQ03

  I've been in these situations for the third time the week last 1. That this error really means? It is time to replace the HARD drive?

  Thanks in advance for your time on this reading.

  Hello:

  Yes, you should backup your files and replace the hard drive because it will ultimately be completely conk out on you.

  No one will be able to tell you what those generated codes mean.

  The key words here are hard drive has failed.

• Pavilion dv6 Notebook: card WiFi and RAM update

  My WiFi is not able to go as fast as the speed that I pay the cable company.  I tell myself that if I pay for it I would be able to go that fast.  How can I tell what will work in my notebook?  Same question as the RAM. Currently I have 4 GB and would like to go as far as I can.

  Please tell me what I need to know, in layman's terms, to buy what I need.

  Thank you!

  Hello

  Your computer is a HP Pavilion dv6-6112nr laptop PC:

  http://support.HP.com/us-en/document/c02996687

  1. WiFi: your machine was built around 2011 so the wifi upgrade is out of the question. You can use the USB dongle if you wish.

  2 for the RAM: your device supports 16 GB max (it has 4 GB from the beginning). Please see page 66 of the following manual for part number. You can buy HP or elsewhere.

  http://h10032.www1.HP.com/CTG/manual/c02842252.PDF

  The manual also shows you how add/replace RAM. More manual:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5082212/model/5173060/manuals

  Kind regards.

• Pavilion dv6 problem with webcam and microphone

  Hello
  I have a HP Pavilion dv6-6156ea, which is a little more than a month.  It runs Windows 7 Home Premium.
  Today, tried to use the webcam and microphone for the first time, a Skype call, but none of them does not seem to work.
  The webcam is not displayed in Device Manager, but the microphone is.
  When I opened Cyberlink Youcam, it does not recognize that there is an internal webcam.
  What should I do to activate the microphone and the cam?

  I followed the link below and follow the instructions.  But the webcam is not displayed in Device Manager.

  http://support.HP.com/us-en/document/c02452221

  Because is not find the device, I don't know how to update the drivers.

  I don't know how to solve the problem with the microphone.  I don't know if these things are likely to be associated.

  Any help appreciated

  Thank you

  Feel a little silly answering myself, but no one responded and I thought it is best to share what I found out.

  The webcam was defective, straight out of the box.

  And the microphone is connected to these features, but uses a different driver - if your microphone works, it could be a sign that your problem is with the driver for the cam.

  I bought the PC world a month ago, so there was although it is very busy.  It was the second faulty webcam in HP they had returned today - most early was a dv7.  There was no problem with replace - they took a glance, considered to be the installation of the drivers on a disc, but when it was not displayed in Device Manager and the microphone works not more, they knew right away.

  It really shows control of very poor quality of Hewlett-Packard.  It's a shame that in the first weeks, I was really happy with this model, but realistically, now I know that this is what looks like their QC, when my company needs its next piece I'll go with anything other than HP.

• Pavilion DV6 2138ca: Pavilion DV6 2138 ca - SSD and RAM upgrade

  Hey people,

  I want to improve my lapotop hp (pavilion dv6-2138 core i5 M430 2.27 GHz), 8 GB RAM and 128 GB SSD HD.

  Will it work on this laptop?

  Thanks in advance.

  Yes, it will be.

  Pages 4-10 and - 11 of this manual:

  Repair manuals

  You need 2 of them:

  4096 MB, 1066 MHz DDR-3 DIMM 579156-001

  http://www.Amazon.com/memory-Compaq-notebook-DDR3-1066MHz-204-pin/DP/B008O537Q2/ref=sr_1_6?ie=UTF8&QID=1460914288&SR=8-6&keywords=DDR3-1066+so-DIMM+for+HP

  Any SATA 2.5 inch SSD will suggest working and I have the 250 gig. A concert 128 is a bit of containment and not much cheaper:

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E250B-am/DP/B00OAJ412U/ref=sr_1_3?s=PC&ie=UTF8&QID=1460914445&SR=1-3&keywords=Samsung+Evo+850

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP pavilion dv6-2115sa card mother and processor replacement

  Hello world

  I have a HP Pavilion DV6-2115sa

  Product number: WB330EA #ABU

  It is out of warranty and one day when he began cutting during the boot. I brought it to a local store and they gave me a ridiculous price for a replacement motherboard.

  I came across one with HP Pavilion DV6-2113sa auction to sell for a small price with a motherboard completely functional.

  I wanted to ask if it is possible to move the motherboard for my laptop and possibly putting my processor in the new motherboard?

  I would very much apreciate any responses as the id would like to know if there is any time to do the 2113sa?

  [removed s/n of privacy]

  Hello:

  I would speculate that it is certainly possible.

  Here are links to the two models.

  http://support.HP.com/US-en/document/c02054970=

  http://support.HP.com/US-en/document/c01977848=

  I would say that they have the same processor family that they have the same motherboard.

  Paul

• Pavilion dv6: gel questions - Long and short DST errors

  Hello.

  Im having freezing randomly and stopping the laptop to answer. "" Do you have the test equipment fast twicw and expand and these errors appeared, 'short DST failed: 0GC49F-64983J-QFPK1G - 60 X 603'and'LONG DST FAILED: 0GC49F-64983J-QFPK1G-61FW03 '. Also the webcam stoped to work, but I don't think it's related. Do these errors mean?

  Failure of the [disk Self Test] DST indicates that your hard drive will probably fail in the near future.

  You should backup all important files, to create a system recovery media and replace the hard drive with the same size or larger than the original.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Pavilion dv6: I did now the hard drive on my HDD test failed and the pavilion dv6

  The problem is that my laptop when I start it it takes like 10-15 minutes to load.

  I see loading windows xp logo and then he is suspended for more then 10 minutes or more.

  Now, I tried to do a test for the material. I turn on the laptop and click the F2 key and I entered the test screen of hp hardware. I moved start test drive hard and after 5-10 seconds or if stopped with a test failure:

  That's what I see now on the screen of the laptop:

  Test Drive: 1

  INTELLIGENT control: PAST

  DST short: FAILURE

  FAILURE ID: 64WE1A-5BC7Q7-XD003F - 60Q 903

  PRODUCT ID: XE041EA #ABT

  Hard drive 1

  Edit:

  I tried now all the other tests in the F2 screen, and they all went except the short DST hard drive that has failed.

  Better to buy a new hard drive and replace it with this one and I install the new OS on it own?

  Test drive: FAILURE

  Does that mean ID failure? I need to replace with a new hard drive? If so can I buy a new hard drive and replace it only with myself?

  I did no other reviews but I want to first of all understand what it means to id of failure.

  Hello

  The hard drive is faulty defiantly and Yes should not replace. Failure ID is given, so if your laptop is under warranty you can give this to HP and it will then allow you the replacement

  Usually the instructions on how to replace the hard drive are in the manual of your computer that you will be able to get a copy on the HP site. You can also buy the HP installation media which will be operating system files on your for reinstall on the new hard drive.

• Pavilion dv6 3080el - sistem recovery after hard drive change

  Hello world!

  I have a pavilion laptop dv6 3080el with windows 7 and after the HARD drive that basically, I bought a disc double, specifically BLACK (2) WD Dual Drive.
  I used the DVD I reinstal windows using system recovery, but after I put in the DVD 5 and pressed "continue" to restart the system, I just get (after the first screen where by pressing ESC, you go to the Start Menu) wrote a black screen with "No boot device - insert boot disk and press any key".
  Any suggestions on how I can complete the installation of windows?

  Thank you!!!

  I just went through this same problem. See the solution posted under the message topic "pavilion dv-6 3216 does not start.

  Good luck.

• Pavilion dv6-1030us: there is no hard drive

  I have a dv6-1030us which today would not initialize, said that no boot device and the hard disk do not exist.  Works very well yesterday, without any hard disk problems.  I have the original recovery disks that I created when I got the machine.  When I put disc 1 one number, it says windows copies the files, then a status bar continuously appears above the copyright of microsoft thingy.  The status bar continues to flow as he do something and not going anywhere.  If I insert recovery disk number 2 nothing happens, even if I insert the disc number 2 and try to restart.  Any ideas or is it time to go shopping

  It seems that the hard drive has failed and needs to be replaced. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 320GB hard drive you can use a 500 GB hard drive but not a hard drive of 250 GB. The main problem you will have to avoid is that latest hdds Advanced Format (AF) will cause major problems and probably a return for Vista recovery disks.