HP Pavilion dv6 Notebook PC: HDMI Port does not

I updated my Windows 10 operating system and since that time the HDMI port did not work to my TV. This worked fine before the upgrade. I deleted the Intel drivers and installed the chipset as recommended on a previous post.  I tried another cable. It did not work.  The message on the TV is No Signal.

Hi @Saxnot, @muzza180,.

HP has worked closely with Microsoft on the development of Windows 10 and drivers for graphics cards. Currently there is no driver available for your system. You can try and check at a later date, because I see new drivers all the time.

Thank you.

Tags: Notebooks

Similar Questions

  • Pavilion dv6-6c55se: My HDMI port is not working

    Hello

    I upgraded my windows to 8.1 - 64 bit and after that I found my HDMI port and Bluetooth does not work, since this page, I have Download Intel high definition (HD) Graphics Driver that complete the installation with an error that says:

    ---------------------------
    This computer does not meet the minimum requirements for installing the software.

    ---------------------------
    also, I downloaded Qualcomm-Atheros Bluetooth 4.0 + HS Driver for Microsoft Windows, but nothing happened, however, I'm prety sure that my bluetooth product is the Intel® PROSet/Wireless software for Bluetooth® technology (it was the previous windows driver) that I downloaded from this link, and it didn't work.

    I'd appreciate if someone helps me.

    Procuct model: pavilion dv6-6c55se

    Maybe your model didn't need driver wireless button.

    The dv6-7000 models require this driver running W8/8.1.

    Most of the older models do not use it, but I didn't know where the break was.

    I just guess that maybe that was the problem.

    Unfortunately, I don't have any other suggestions for you to try.

    I have rarely, if ever use bluetooth, so I have zero skills of troubleshooting for bluetooth.

  • HP pavilion dv6 notebook (my dvd burner does not work

    I have a hp pavilion dv6 laptop. my burner does not work. I went to the Device Manager I uninstalled, shut down the computer, restart the computer, the device mgr.enable the writer went I have little yellow guest. still, the writer does not.

    I perform a driver update, the response was: the driver is already installed is to this day. My dv6 is 28 months old.

    need some advice.

    under Device Manager.  CD-ROM/DVD-rom readers

    HP cddvdwsn-208bb

    "device usb HP dvd writer 940D thank you billy'g"

    Hello

    Try please run now from the following link:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Kind regards.

  • HDMI port does not work

    Original title: HDMI port stopped working after the update.

    This morning my laptop did an automatic restart to install updates and now my hdmi port does not work. I tried to restore the system to a previous point, but that has not helped. I have a HP Pavilion dv6.

    I worked with a team of online crash analysis and they had update me of the BIOS. That fixed the problem and the HDMI port is now working again. For those of you who have the same problem, go to http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48953.exe .

    Update your BIOS can help you too.

  • HDMI port does not work after you refresh the computer.

    Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

    Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

    If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

  • After update laptop graphic card driver HDMI port does not not work and sleep mode disappers

    Mr President, I have buy a new computer laptop 15-e017tx after the update of the graphics card.

    • HDMI port does not when I connect the laptop to my led tv
    • In the windows operating system sleep mode is dissappers.
    • On the start menu, the language is Hindi

    There are problems am faceing now. How to solve this problem? Short films screen attach also the problem when I open the catalyst control amd.

    Hello

    As mentioned above, restoring Windows 8 will allow:

    http://Windows.Microsoft.com/en-AU/Windows-8/restore-refresh-reset-PC

    Good luck.

  • Satellite Pro P300 - output HDMI port does not

    Hi all

    Well it starts to drive me to distraction and Im hoping that theres someone who can put me out of my missery lol.

    I tried to connect my laptop (toshiba satellite pro p300) up to my LCD TV via the same HDMI cable that I use for my PS3 but the connector does not simply. I keep finding all these messages in various forums saying how they can't get the HDMI connection... that would be great, at least, this means that they were connected.

    Are there different links for the HDMI? The one I have is diagonal connector but the port on the laptop is more square and just doesn't fit. So, if it is not a connector, does that mean I have a funky port on the laptop.

    There is also the issue of connecting my laptop to my amp which controls the surround sound system. Which link is best to use, as there is no real connections audio output?

    See you soon

    Hello

    Can you please tell us what Satellite Pro P300 you have exactly? I mean the exact model number.
    Maybe you can also post a picture of the HDMI port. Normally there is no different HDMI port, all have the same physical size.
    I m PS3 not owner, but maybe he has a special connector. Have you tried another cable?

    Regarding the audio connection I use the normal line of output port to my external speakers. Have you tested this?

  • Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

    Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

    Hi cdk14031


    You have set display up-to-date drivers installed?

     

    Step 1 :
    To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
    Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

    a. click Startand then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    After the computer restarts, the drivers will be installed automatically.

    Step 2:

    If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

     

    You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly


    You can also check the support link and check if these help - below

    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

    I hope this helps.

  • HP Pavilion dv6-6119tx: AMD Radeon 7400 does not!

    HII I have a HP dv6119tx notebook pc with amd radeon HD 6490 m. When I upgraded my OS from Win 7 HomeP Win8 pro graphics changed in HD 7400 m and its does not work. When I check through Device Manager, indicated by a yellow exclamation on amd driver. When I try to update the driver, it instructs windows already installed the latest driver. I then tried the amd auto detect tool to update the driver. But the downloaded file does not work in my system. So now how I do my amd gpu work and get switchable graphics

    Hello:

    Use of the W8 amd graphic driver for this model.

    Uninstall all the drivers you have tried everything first and reboot before installing this driver.

    This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp59850.exe

  • Satellite R830 - HDMI port does not work

    Hello

    Is there a driver for the HDMI for the Satellite R830 port?
    It is no longer connects to a TV.

    I tried different TV but still nothing.
    Also there is no HDMI in under the control panel Device Manager, should there be?

    Thank you very much for any help or advice.

    Hello
    I put t know what Windows system that you use on this laptop, but the driver HDMI isn't available from the HDMI port driver is part of the system and should be recognized automatically.

    Capacity Audio HDMI you need to install the right audio driver and should allow this in Control Panel-> sound-> playback device

    HDMI (digital out) would be not listed there, right click and choose:
    Show devices disabled, view hidden devices.

    Usually the HDMI connection isn t very delicate. Everything should run automatically.
    Connect both devices with a HDMI cable.
    Turn on the TV, then the computer.
    Now, use the exit function FN (key) video combination in order to get to the video (HDMI).

    Note: the correct HDMI channel must be selected on your TV

    All that s

  • Toshiba 32PU200EJ - HDMI port does not signal

    My toshiba TV series 32PU200EJ unable to connect to the HDMI port,
    last week, it was OK,

    I use it just for the PS3 game.
    When I try to connect the HDMI to PS3 or laptop, it says "unsupported SIGNAL".

    ANYONE can help with this problem? Thanks :)

    The TV supports multiple HDMI ports. Right?
    Have you checked the different HDMI ports?

    Reset you the default settings?

  • Aspire Z5771 - Windows 7 64B - HDMI port does not

    Hi, recently I had to format my internal hard drive and reinstall Windows 7 using the DVD that I created with the ACER Recovery program.

    My front HDMI port worked perfectly, and I had just to plug something into the port so that everything is on the screen. This isn't what I have now. It seems that my tablet is not longer detected by the HDMI port and nothing appears on the screen.

    Can anyone help please?

    Thank you

    Try to install these drivers:

    http://global-download.Acer.com/GDFiles/driver/VGA/VGA_Intel_8.15.10.2462_W7x64_A.zip?acerid=6345659...

    and

    http://global-download.Acer.com/GDFiles/driver/VGA/VGA_NVIDIA_8.17.12.7570_W7x64_A.zip?acerid=634552...

  • HP Pavilion dv6 7078ca: laptop fan Hp does not properly

    Hello

    I use a hp pavilion dv6 7078ca for about two years now. A few days ago, he showed me a B90 error at startup. The error was on the cooling fan will not work correctly. I tried a few methods on other sites such as clean the vents with compressed air, a hard reset and the same update the Bios without success. I removed the keyboard and found that the fan turns, but very slowly and once from time to time he speeds up and slows down again. Temperatures on the laptop seems also about 58 degrees Celsius even with a few applications in the background.

    So is there any explanation and correction for why the fan is not accelerate properly and b90 error?

    It may be defective and should be replaced.

  • Satellite C855-29N - HDMI Port does not

    It was working perfectly before but now when I try the computer makes noise and seems to connect to the tv but there is no signal to my TV?

    I wonder if it is a driver problem, but it looks more like a faulty connection which means that it is gone forever? :/

    Pressing the function key F4 (Fn + F4) should change the screen output.
    It does not work. Right?

    Could be interesting to know if the graphics update driver / new installation would change something here have you tried it?

    In the worst case, you will need to recover the laptop back to factory settings to check if its hardware or software related issue and I think that the problem of software.

  • I recently installed Windows 7 Home Premium (x 64) on my HP Pavilion DV6 laptop and now Aero does not work!

    It is all opaque and I'm trying to install the Intel graphics drivers and Nvidia graphics will not work!

    What I'm doing! She also does not connect to the internet, the sound does not work and I cannot adjust the brightness of the screen.

    Should I try Windows 7 Ultimate? (My PC is recorded, not mobile phone).
    I will provide you more details if you need.

    Hello

    Please review these links and see if the problem is resolved.

    Open the Aero Troubleshooter

    Please visit this link and check if the hardware and software requirements are met.

    What is the Aero visual experience?

    Please get back to us with the State of the question.

Maybe you are looking for

  • Toshiba virtual Store account Reset - 34036

    Hi I want to reset my acount journ e touch. Also I heav'n some problems with internet explore does not and all the aplications that use internet explore. Only the browser "Opera" work.Thank you. Personal account is 34036.Model px1530u-et1.

  • Hardware card NETWORK does not appear in the Device Manager on Satellite Pro A40

    Satellite Pro A40 with XP home. The Integrated NIC does not appear in Device Manager.I booted Knoppix on CD, which correctly identifies the load hardware ethernet drivers, etc., and I am able to access the internet, so I know that the hardware is OK.

  • How can I turn on visibility on my Tecra A4 with Toshiba bluetooth stakc V4?

    Hello I have a Tecra A4 with the latest version of the bluetooth toshiba (v4) stack. How can I activate my laptop bluetooth visibility? I need to do so I can use my Sony Ericsson K750i as a remote control for windows media player. I was able to do wi

  • STL display problem

    Hello I have problems with the display of a STL file in Labview. The STL file that I use is in ASCII format, but I can't view it. A part of the screen goes gray when I run the VI. You can see 3D and schema-block image display. What could be the probl

  • Not able to download the MFL Pro Suite

    Assistance to locate and download MFL Pro-Suite I can't redownload MFL-Pro-Suite witch seems to affect my ability CC3?