HP Pavilion dv6 - Num Lock

Similar Questions

• White screen on Boot and CAPS lock and NUM lock LED blinking on HP Pavilion dv - 6 portable 1210sa

  Hello

  I'm on HP Pavilion dv6 - 1210sa laptop with Windows vista Home Premium (service Pack2). It's the operating system, which is that the laptop came with when I bought in 2010 and later service pack 2 was installed using windows update. I can confirm that my laptop is up-to-date with updates of windows and hp installed periodically. My problem is the following:

  Everytime I turn on my laptop, I can hear the noise from the cooling fan and the led power and feather touch volume buttons and a wi - fi light up. However, the screen remains blank and the CAPS lock and NUM lock Dungeon LED flashing with three second gap between two flashes. They Flash together and blink only once in a single cycle. It keeps flashing even after leaving it for 10 minutes. I have to perform the hard reset several times before I can get it started. This problem started a few months ago with the frequency of the problem more and more. It has now reached a point where I encounter this problem on every start and even after the awakening of the laptop computer from standby or hibernation.

  I know that the flashing of the LEDs is typical diagnoses, but I was unable to understand the real problem. I know the screen works because I tested using an external monitor to work. It should not be the battery (even if it's crap to maintain charge) I tried to restart the laptop with just AC adapter connected (and battery removed) after having done a hard reset and still, the situation did not improve.

  Could someone please tell me what is the problem and what are my options? Think you that formatting my c: / and re - install the OS will solve the problem?

  Thank you.

  Please come back to me

  As long as you keep your files backed up on the outside, it is to you how you want to proceed. First question, however, is you are in warranty or not? If you are in warranty, Yes, call telephone support and will take care to have it sent repair.

  If you are no longer in warranty, however, that the repair can be expensive. You could certainly call for an exact quote, but according to the availability of the room, it might be around $200 and for an out of warranty repair. Money would probably be much more effective if they are presented to a new computer.

  HP Total Care 1-800-474-6836

  BUT, if you're still able to get the it to power (after trying it several times) and you're OK with the disadvantage, it would be nice to hold off on buying a new computer until it failed completely. I hate this word like that but I want to be realistic with you. I'm sorry that you are having this problem. As I said though, your files are the priority. Keep all your documents and photos and other precious files saved on an external hard drive or flash drive. Let me know if you have any other questions

• Pavilion 17z-F200 CTO: How do I change turn on the num lock (NumLock) key have a State by default to it?

  How do I change turn the num lock (NumLock) key a Pavilion 17z-F200 CTO to have a State default one?

  System BIOS has no setting for it. By another post, I tried to set the value of register in HKEY_USERS\. Default\Control Panel\Keyboard for "InitialKeyboardIndicators" of "2147483648" to "2147483650. It seems not to change after a reboot.

  Yes, the BIOS settings was the first thing I checked. But BIOS seems to only contain States in order for the locks of keys on the new HP Pavilion or Envy laptop.

  I did more research and found more credible sources to TechNet asking to change the same registry value to 2. I tried it and it works a fact/do.

• HP pavilion dv6-1245dx won't boot screen logo, grid screen, caps lock, shift and numluck work

  * little background, my laptop works well before it happened, I stopped and then tried to power it using after a minute I Gilles down, it starts and then when I try to use internet, the display suddenly blacked out, thought it was the power so I tried to power it again I get is bright with no logo so I turn it on and turn it on again then it became lines graph form tried to check if keyboard works numlock and capslock not working when I press it, ang wireless volume does not work

  HP pavilion dv6-1245dx won't boot screen logo, grid screen, caps lock, shift, and numluck work.

  I tried to remove the battery and press hold power button almost 60 sec to reset the bios always the same, I tried the reinstallation of the memory 2 still the same please help

  problem solved... saw something on the forum about pressing f10 or f11 I randomly pressed start magically work

• Pavilion dv6: 10 for Windows upgrade fails Pavilion dv6 after update and entry of password

  After updating my Pavilion dv6 Windows 7 64 - bit of Windows 10 64 - bits, the connection to the computer to update resulted in a machine stuck with white (gray) screen. The upgrade seems complete without any problems. It is only after a reboot with the machine being upgraded and after entering the password that the lock status was encountered.

  You can see if any of the suggestions in the linked thread works - but DV6 succeed well in Win10, and if none of these work, you need to consider restoring to Win7: HP Notebook PC - computer starts but the screen remains empty (10, 8 Windows) | HP® customer support

  I have a DV6 and after many hardships, restored to Win7 because I felt that an older OS where everything worked was much higher than a more recent OS where many things were "broken."

  And there is no driver HP Win10 for the DV6.

• Pavilion dv6-2115aa: Pavilion dv6-2115sa BIOS corruption failure

  My laptop does not start and flashes the caps locks and MOM sighted twice, which according to locking elsewhere on the forum, is a BIOS corruption failure. However, I can't find a BIOS version anywhere on the HP support site to re-install it, especially not for Win10. Will there be a third safe to download from?

  Too bad, found here:

  http://support.HP.com/GB-en/drivers/selfservice/HP-Pavilion-DV6-2100-entertainment-notebook-PC-series/4041735/model/4099881#Z7_3054ICK0K8UDA0AQC11TA930O2

  Obviously couldn't he see that I was on my phone and the page has not updated correctly

• HP Pavilion dv6-6153eo: mPCIe upgrading (stupid GDC EXP)

  Hello everyone.

  Im trying to beath new air in my old laptop so I can use it for a game while I travel those again.
  the reason why I'm here because I don't know if a 3party (EXP GDC Beast) will work on my computer with the mpcie slot?
  I also know that the mpcie slot (slot for card wifi inside your computer) may be locked for some reason.

  for example. I tried to replace my old wifi with a new card support 5 GHz and my computer told me to remove the new wifi card and refused to start.
  
  so my question is:

  is it possible to bypass this warning?

  the port of mPCIe will work with other modules outside the wifi cards?

  I have a HP Pavilion dv6-6153eo with W7 64 bit

  Best regards DKL2

  No, this site is for one purpose (wifi). It has no connection with the screen so there is no way to install any type of videocard in there, and even if there were this is equivalent to a pci - e slot 1 x is unable to transport sufficient bandwidth to where quality would exceed the original video card in the laptop. I think that these berries external videocard for laptops are modern snake oil.

• Pavilion dv6 - 3227cl laptop entertainment puts but has only a black screen

  HP Pavilion DV6 - 3227cl Entertainment Notebook, which is about 2 years old and works on Windows 7 Home Premium, AMD Vision Premium, will to power, but not start.  The fan works and the "caps lock" flashes once approximately every 4 seconds, but all I get is a black screen with no error message or the cursor.  There are no beeps.  The power led lights (white) for about a second, then turns to a dim orange when the battery is installed, but remains white when the battery is removed.  However, the two lights (I'm not sure what they are for) next to the nearest port USB power light lights up as follows: one on the left (as you are looking at the right side of the laptop) is white; the right one is orange.  Both are fully illuminated, (not vaguely that the power light).  The power light is not as bright as the other indicator white located near the USB port.  The laptop started and seemed to be running once since this problem started, but I was not able to start again.  I'm told the battery is bad (it's my brother in law book), but it is possible that the problem is with the power source rather than the processor or motherboard?  I appreciate your comments/advice about this.  Thank you.

  Hi fejevitzky,

  Your question, "according to that, I think you're telling me you don't think it's the BIOS - is that correct?" Yes, as long as you don't see any "white" light reveals LCD bezel back while with the State of the white screen. Bezel LCD's coverage around LCD, most design put modeule LED in the lower corner next to the LCD. While the backlight is not during the boot sequence, which means system doesn't have chance to get BIOS current enforcement program. It also means, he stuck to the condition of the equipment to set up. Normally this motherboard related.

  Quickly, I checked hp.com and found a link that may help. Or 1-800-HP-invent (1-800-474-6836) can save time. This forum only intends to answer fast/just the users questions. On another charge of repair and maintenance, I have to give you other links to achieve.

  HP Partner and Store Locator: (I try to search for your city, but it does not work well.) Suggest that call you for a quick response)

  http://WWW8.HP.com/us/en/store-finder/index.do

  Contact information:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  Contact HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  HP SmartFirend Services: (I saw with the price of the service)

  https://h30617.www3.HP.com/HP/home/index.asp?JumpID=in_r11682_us/en/HHO/PPS/suppgateway_gi_ob_ds_pd/smartfriend_cc/DT

  Thank you very much. If you think that my answer helps your product, please help to close this case once you feel comfortable. Then, click on "CONGRATULATIONS."

• Laptop HP Pavilion dv6 - 3016 s: USB (device not recognized) problems

  Hello

  on my laptop (Pavilion dv6-3016sl, bought in 2010) for a few months the USB connections give many problems with different devices.

  The first issue with the key external communication 3G (ONDA TM201) Internet: the USB key (which has worked for many months) is not recognized. I tried to reinstall the software and drivers (get the latest version from the website of the producer), but it is always unclear correctly.

  The visible in USB Device Manager error message is "cannot start (code 10) machine.

  Recently other USB devices have ceased to be recognized: powered USB Hub (HAMA USB 2.0 Hub 1:4, bus) and the Wired Optical mouse (Logitech).

  It is also not possible to install new USB devices (for example, a device of wireless sync to a cuff of training).

  I've done many controls of Microsoft on the integrity of the system, and I frequently run the Windows Update to be aligned to the latest version of the fix.

  You have any suggestions to analyze/fix this locking problem?

  Thanks in advance,

  Moreno

  I know this may seem a rather harsh to suggest method, but at this point, I suggest backup of important things on your laptop computer to online storage. This is because you can use the USB storage for the moment.

  Once you have done this, it's time to locate your drives support usb recovery and licenses of all other programs that you have installed or recovery.

  Start on the recovery media.

  Use the HP Recovery Manager to perform a factory image recovery which will reinstall the operating system.

  Since you say that the usb ports work under Linux, then reinstalling the operating system Windows needs to solve the problem of usb port that you are experiencing.

• RALink 3592BC8 and HP Pavilion dv6 - 3155sr

  Hello world

  did someone knows, is Ralink 3592BC8 (part number 630813-001) supported in the HP Pavilion dv6 - 3155sr (XX567EA product number)? Currently I have RT3090 WiFi / camera combined BT.

  They look quite the same thing, but one thing that confufes me, is 3090 is model of 1 t/1R and 3592 2 t/2R... But both have 2 antenna connectors.

  You are the very welcome.

  It's locked out of BIOS. Unless you know how to modify the BIOS to allow inclusion of all wireless cards, the PC even does not start until you remove the unsupported WLAN card.

  I don't know how, or if the BIOS of your PC can be hacked.

  Paul

• Corrupt BIOS HP Pavilion DV6-6c51sa

  When I try to boot my laptop it just at a black screen and dosent boot up properly. After about a minute of waiting the caps lock light starts to blink in a cycle of two flashes, which is as I'm lead to believe there is a corruption of the BIOS. I tried to restore the bios with a usb key, but nothing seems to happen when I boot the computer laptop now Fn + B or the WIndows key + B.

  I had before the problem had crashes blue screen due to the igdkmd64.sys which according to me is my drivers intel.

  I have the HP Pavilion DV6-6c51sa, and it runs windows 7

  Hi Drewett90,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you may receive a blue screen error 'igdkmd64.sys', but now you get a black screen and the caps lock flashes.  Here is a link to the computer does not start and the lights blink or the computer will beep.  Two beeps indicate a corrupted bios.

  Here are documents on selected BIOS HP Application is damaged or missing and restore the BIOS to help this difficulty.

  You can download the update to the bios of HP Pavilion dv6-6c51sa Entertainment Notebook PC Drivers.

  You can also try this.

  At the start, press the F10 key to access the bios.

  Please note on the bottom of the window F9 default installation please select and click Yes. He must try to load the default settings.

  If you are able to load Windows again, I suggest The HP Support Assistant to search for updates running.

  Please let me know the results.

• installation of a hard drive accelearation 32 gb on HP Pavilion dv6-3127dx WSSD

  Re: HP Pavilion dv6 Notebook, #XG756UA, #ABA, Windows 7

  Hello, I have the laptop above, bought on / 12/2010.  Because I dropped it by mistake, he cracked the tank down to the left and the hingue screen is loose so I have one vision of the white screen now, but other that the laptop works.  It does not guarantee the expense to fix this problem, so I decided to buy a new laptop and keep this one as a desktop use.  I connected it to an old CRT monitor right now and it works very well and does the job (I turn ends up getting a HP Monitor to have a more modern monitor).  I am actually very happy that there is still life in this book, the view is much better on this old CRT monitor and other that the stupid error in fact throw my bag of books without realizing that the laptop was in it (one lap memory), this laptop has been well looked after - the only problem is that it's sometimes very hot , do not know why because I don't really play games on it, but I understand this model had this problem anyway.

  To improve the stimulation I wonder if I can install a cache to speed up hard drive 32 gb WSSD.  I want to know if this process is simple enough for me to make my own.  It is a card that I just bought and plug a peripheral location or is it something that needs to get inside the laptop; where a technician must do?  In addition, how about installing a better graphics card while I am?  It currently has an integrated approach.

  Any help is appreciated, so thanks in advance.

  Graphics on laptops are usually soldered to the motherboard.  Laptops, when it comes to critical components, are generally locked in this configuration.  Some components, such as the processor, may be possible, but it is not an easy task.

  This guide by erico, one of community experts, answers a lot of questions about the hardware upgrade in a notebook.  This may be worth reading, if the upgrade of equipment is something that you are interested in.

  Unlike desktop computers, laptops are not really designed to be upgraded.  This is largely due to how the laptop has cooling in mind.  More powerful components will generate more heat and the initial design of cooling (fans, heat and air sinks) may not be enough to handle the extra heat being generated.

  It really looks like that this laptop does not what you're looking for.  The graphics card is something that is usually not extensible/now, and it does not appear that this unit has the architecture required to support the option of disk cache.  Just to add some clarification, the architecture of disk cache usually relies on a RAID configuration to accomplish this task. Since the RAID (Intel RST) driver is missing from the download page, it seems that this device does not have RAID capacities.

  If the startup speed is something you are looking for, the upgrade of the disk as a whole to a standard SSD can be the best option for your needs.  However, watching a new laptop can be the best option if you want to also material improved, such as the graphics card.

  This laptop comes stock with a cache of WSSD 32 GB drive.  Looks like ultrabooks include a cache drive that I looked at four different large and each had a disk cache included.  They do not have the list in the specifications of the laptop, but it was listed when I chose the option of customization.  However, more than likely ultrabooks won't the video card you are looking for because of the compact size that ultrabooks are designed.  The desire line generally has most of the options for video cards.

• HP Simplepass stops working. HP Pavilion dv6. Assistance needed

  Everytime I open Hp Simplepass, he tells me to scan my finger on the sensor. However, when I slide my finger across the sensor, I get an error saying: "it seems that you are experiencing some problems. You want to try again? »

  It's really frustrating because he did this for about 2 or 3 months now, and it worked perfectly fine before, when I started using the simplepass.

  My computer specs:

  -HP Pavilion dv6 notebook

  -Windows 7 x 64

  -Product number: LW262UA #ABA

  Record biometric device:

  -Validity Sensor (WBF) (PID = 0018)<--(This is="" written="" exactly="" as="" found="" in="" device="">

  -The version of the driver is 4.3.118.0

  [When I discover the properties of devices, it is said that "the device works properly."]

  -HP SimplePass 6.0.100.276.

  I searched the web and tried a lot of different solutions that I found, that were simular to my problem. However, I didn't chance still. Here are a few things I've tried:

  -Hard Reset

  -Clean the re-booting

  -Uninstalling the driver and let windows re - install it automatically on reboot

  -Update the driver

  -Disable the driver, then in reactivating

  I have not tried to do a system restore point, because I do not have a restore point that was 3 months ago. Also, I would lose a lot of this parameter and that I currently have.

  Any help would be greatly appreciated

  I found the solution to this problem after a lot of work.

  I went to the Device Manager and uninstalled completely, the pilot of the validity and the parameters. Then I opened my control panel and navigated to the list of programs, uninstall a program.

  I uninstalled the program called 'validity WBF DDK"completely. I tried to uninstall the other program next to what we call the 'validity DDK sensors", however, it gave me a warning message indicating that uninstalling this program, could perform other software or devices. So, to avoid any problem of unnessary, I avoided to procceed with the uninstall of this specific programme.

  Then once I finished the "WBF DDK validity" uninstalling, I navigated to a search engine HP store and looked for a software based on my computer model number. (http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5118737#N1655)

  Then, I downloaded the program simplepass safety on this page category. I also downloaded the driver for validity.

  The pilot of validity was sp53369.exe and the program simplepass sp54680.exe.

  Pilot of validity: http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53369.exe

  SimplePass program: http://ftp.hp.com/pub/softpaq/sp54501-55000/sp54680.exe

  I installed the driver of validity first, and I chose 'Yes' when he was asked to replace all the other data that was there.

  After that, I ran the download simplepass and successfully installed.

  I rebooted my computer and connected. (with password)

  Then, a message pops up saying something about searching for a driver or something like that. And he has been looking for him.

  I let him finish what he was doing and about 5 minutes or more, it's over. I tried, and then open the program simplepass. It has successfully opened and I could finally record a finger.

  Once I have registered a finger (and a toe) I closed the window simplepass and hit windows key + L to lock my pc. Then I spent my finger to check if it works, and to my surprise, it worked.

  I hope this helps if you have the same problem, I've had.

• HP Pavilion dv6 does not start. CapsLock flashes 3 times.

  Hp Pavilion dv6 , I bought about 11 months ago. When I tried to turn it on today morning, it didn't start and the light caps lock flashes 3 times. I searched the Internet and discovered that it is a memory problem. Is there a solution to this problem so that I can fix it in the House?

  Hello

  Try to remove and re-seating memory module - the procedure is detailed from Page 68 of your & Maintenance Guide.

  Failure to correct the problem, as your laptop is still under warranty, your best option is to contact HP and make arrangements for this repaired under warranty - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Pavilion dv6-2170eo: UEFI does not work on the Pavilion dv6-2170eo

  I updated the BIOS on my Pavilion dv6-2170eo of the e.17 release (I think) for F.1CA, the last of them. I have installed Windows 8.1.

  As there was no partition HP_TOOLS, I could not use the BIOS Setup. I created a HP_TOOLS partition and installed the HP System Diagnostics UEFI, sp52093.exe, but I can't always run the tools of diagnosis or the configuration of the BIOS. When I press ESC, F2 or F10 when booting the computer locks.

  If there is no other solution, I would like to go back to an older version of BIOS, without EFI, because it worked well before. Where can I find such a version?

  Forget it. I misunderstood the problem.