HP Pavilion dv6: recovery disks ordered HP but recovery is a FAILURE...

The hard drive failed on the laptop and I got a replacement after all operations of chkdsk drive, which has been formatted without problem in the initial recovery stage.  Classified into recovery disc for HP Pavilion dv6.  Insert the first disk and everything goes OK.  Load the 2nd disc and everything seems to be OK.  Load the 3rd disc (Supplemental) and everything seems to be OK.  Laptop restarts for the first time, starting Windows starts, starts the Software Installation section.  2nd restart start automatically then start Windows appears.  Additional CD is drive all the time.   The Recovery Manager window appears and indicates "recovery has failed.  Select one of the following buttons:...  Now, I save the log.  The log file is saved as. HP_SSRD_LOG SRD.

--------------------------------------------------
[17:47:22.78] enter audit OS Edition...
----------------------------------------
[17:47:22.80] check RStone.ini file to determine the required edition.
[17:47:22.83] out of checking OS Edition...
--------------------------------------------------

--------------------------------------------------
[17:47:22.85] controls if the upgrade to Windows 7 is required.
----------------------------------------
[17:47:22.86] current edition is [HomeBasic]...
[17:47:22.86] [start] necessary. Don't need to upgrade...
[17:47:22.88] [Starter] needed...
[17:47:26.67] necessary [Starter] edition. But is not the case of the [Starter] OS...
[17:47:26.67] OS edition upgrade might have a problem...

Management and maintenance of deployment images tool
Version: 6.1.7600.16385

Image Version: 6.1.7601.17514

The current edition is:

Current edition: HomeBasic
The operation completed successfully.

Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
--------------------------------------------------------------
Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
[17:48:11.96] ------------------------------------------------------------------------------------------
...
CTO error condition has been undergoing dtected [update Factory]! ***
[17:48:11.96] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
...
[17:48:11.97] ------------------------------------------------------------------------------------------

[17:46:33.77] Start BBOffline.cmd...
UPDrv = [C:]
[17:46:33.80] value UIA 951 error Code
[17:46:34.36] WinPE is 32-bit.
[17:46:34.36] start [corrections].
[17:46:34.39] ---------------------------------------------------------------------
[17:46:34.39] FixUps.cmd...
[17:46:34.39] create overall progress information...
[17:46:35.75] complete FixUps.cmd...
[17:46:35.75] ---------------------------------------------------------------------
[17:46:35.75] start [Tweaks for SDRD].
[17:46:35.77] ---------------------------------------------------------------------
[17:46:35.77] SDRD Tweaks to change the regional settings default user...
[17:46:35.77] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
[17:46:35.89] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
[17:46:42.32] ---------------------------------------------------------------------
[17:46:42.33] start PININST.exe for offline...
Housing starts [17:46:55.19] [Sleep 10 sec].
Starting price [17:47:05.28] [creation RStoneFUpdate.INI].
[17:47:15.00] start [create 1 GB Pagefile for offline].

Volume in drive C has no label.
Volume serial number is 4CE2-BE2D

Directory of C:\system.sav\bbv

12/26/2014 pagefile.sys 1 073 741 824 17:47
1 file (s) 1 073 741 824 bytes
0 44,734,984,192 dir bytes free
[17:47:15.06] the mark detection.

[17:47:15.30] ---------------------------------------------------------------------
[17:47:55.53] Start SysID Check...
[17:47:55.98] Start Option control code...
SKU_DEF_COUNTRY = [244]
SKU_DEF_SYS_LOC = [en]
------------------------------
Reset the country in administrator...
------------------------------
------------------------------
Reset the default user countries...
------------------------------
------------------------------
System reset located
------------------------------

Management and maintenance of deployment images tool
Version: 6.1.7600.16385

Image Version: 6.1.7601.17514

Statement of the international settings offline.

By default system UI language: en-US
Settings system locale: en-US
Default time zone: Pacific standard time
The settings for the default user regional: en-US
Location: United States (GEOID = 244)
Active keyboard (s): 0409:00000409
Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

Installed the language (s): en-US
Type: Fully localized language.

The operation completed successfully.
------------------------------
Updating the system locale info...
------------------------------
[17:48:06.81] Start PIN Tweaks...
[17:48:06.85] ---------------------------------------------------------------------
[17:48:06.85] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
[17:48:06.85] ----------------------------------------
[17:48:06.85] Tweaks to Unattend.xml of OOBE
[17:48:06.85] to pick up the right file...
[17:48:06.85] ----------------------------------------
[17:48:06.85] rename unattend.org to unattend.or_
[17:48:07.01] ----------------------------------------
[17:48:07.01] without light sensor...
[17:48:07.03] ----------------------------------------
[17:48:07.04] it is restored by SDRD [SSRD.flg] image...
[17:48:07.04] ---------------------------------------------------------------------
[17:48:07.07] Start MIR Tweaks...
[17:48:07.12] ---------------------------------------------------------------------
[17:48:07.12] [MIR Tweaks]...
[17:48:07.12] ---------------------------------------------------------------------
[17:48:07.15] starting factory updates...
[17:48:09.10] installation start QFE offline...
[17:48:11.78] PININST_OFF: PAST...

[17:48:11.83] Type C:\System.sav\Logs\BBFindEr.log...

[17:48:11.83] Type C:\System.sav\Logs\BBFindE0.log...

-C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
Result = PAST

[17:48:11.86] Type C:\System.sav\Logs\BBFindEr.log...

[17:48:11.88] Type C:\System.sav\Logs\BBFindE0.log...

-C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
[17:48:11.88] FUList.log to check if there are double Desc...
No duplication.
[17:48:11.96] duplicated No. Desc is located... PAST.
[17:48:11.96] there was no update from the factory...

With all due respect this FYI is a user forum if we don't remember that. If you had problems and did not keep telling them something is wrong and also I and others here have no proof of your experiences. And since you threw the material person else or HP can help you now.

Tags: Notebooks

Similar Questions

  • Partition recovery Pavilion DV6 or disks back to factory settings?

    My girlfriend has the laptop Pavilion DV6 with Vista. She is not a computer person, so there is no serious problems it is locking up and goes really slowly. I'll get his PC to the factory settings, the problem is there is no disk and I don't know where the program is placed on HP systems. Is the partition on the HARD drive itself reovery or can I get HP support discs?  Thank you

    Hello

    First of all: you can check in Windows Explorer to see the existing of a recovery partition. If it does not exist, you can restart the PC/laptop. HP welcome screen, press the F11 key to start the recovery process. Follow the instructions on the screen.

    Otherwise, you can order a set of recovery dicses of HP through this:

    http://support.HP.com/us-en/document/bph07143

    Good luck

  • Pavilion dv6: hard disk gets stuck in a "loop", the private resources applications

    I have a HP Pavilion dv6 (dv6-6145dx) with 4 GB of RAM and Windows 7 x 64 installed, 500 Gb HD (Hitachi , 40% brand free).  It worked very well for a time very, very long time.  Recently installed Office 365 month last for professional use, which I was concerned might be a resource hog, but usually works very well.  I also AVAST! Antivirus Pro is installed.

    Last week, I started noticing a strange problem that I had not seen before.  Some applications have become desensitized.  I noticed the hard drive light was constantly.  So I tried to close some applications (including Outlook), thinking that I was running resources.  But the deadlock problem continues.

    Listening to the hard drive, I could hear this "stuck in a loop.  Something like "click-[bunch of quick clicks] - click-click-[break].  Repeats every 2 seconds.  Continues to go on and on.  If I leave the computer alone for about 15 ~ 20 minutes, I discover it has recovered.  But once I run the intensive program of any disk, this repeats itself.  It doesn't matter if it's a 3rd team application or system (such as the launch of Event Viewer).

    To try to limit this, I started in safe mode with network.  I thought that if it was driver related, it wouldn't happen.  I launch the event viewer and still, the loop of the hard drive goes.  All gloomy.

    My antivirus is up to date. I ran a full scan of the system (F2) and no errors.  I ran the monitor resources and Process Explorer in the hope of identifying what that either method was this... couldn't see just guilty.  I also created a new user and logged in with this account... has always been able to experience this problem.  It is therefore not associated user account.

    I'm at my wit's end.  I am grateful that I have another computer I can use, but this should not be the case.

    Anyone who is familiar with this kind of hard disk behavior consumes resources?

    "If you keep an open mind, life will give you more opportunities."

    I ran another system test and eventually got more details:

    "Disk hard Test" failed

    "Fast hard disk 1" (303)

    "Complete hard drive 1" (305)

    OK, so from what I've found, it's a serious error means that the hard drive has failed.

    He is a computer 4 years.  I never had a hard disk failure in a laptop before, and I had many laptops up to nearly 8 years, without any hard drive problem.  The drive inside is manufactured by Hitachi... they don't exactly have the best reputation.  Anyway, all the research that I have met never goes into detail as to what might have caused the failure and if some readers have a reliability problem.  The answer is always "you need to replace your hard drive."

    Anyway, I will not try to diagnose it further.  I send my laptop in for repair (still under warranty - exhausted soon, phew!).

  • HP Pavilion DV6: error disk 3F0 and hard 3F1

    Good, so I was playing my fav game, and my laptop has frozen, I decided to reboot and BOOM!

    3F1 error hard drive

    I'm curious and ran a hard drive diagnostic.
    the results are:

    CHIP: NOT INSTALLED
    DST SHORT: NOT INSTALLED

    After testing, I got error code 3F0, even after the release of the BIOS. A sound signal ends in the BIOS menu.
    On the other PC, the disc is workiing. don't know what to do. Help, please!

    _________________________________________

    MODEL: HP PAVILION DV6
    SYSTEM: WINDOWS 8.1 PRO 64-BIT
    ________________________________________

    Hi @Dawid531!

    This ID failure usually indicates that your HARD drive has failed and needs to be replaced or there is a problem with the SATA controller on the card. There is a great topic on how to resolve this error, so if you want you can take a look:

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/re-quot-hard-disk-3F0-BootDevice-not-found-quot-error/TD-p/5469074

    Hope this helps and let me know how it went.

  • Pavilion dv6 - 3227cl laptop entertainment puts but has only a black screen

    HP Pavilion DV6 - 3227cl Entertainment Notebook, which is about 2 years old and works on Windows 7 Home Premium, AMD Vision Premium, will to power, but not start.  The fan works and the "caps lock" flashes once approximately every 4 seconds, but all I get is a black screen with no error message or the cursor.  There are no beeps.  The power led lights (white) for about a second, then turns to a dim orange when the battery is installed, but remains white when the battery is removed.  However, the two lights (I'm not sure what they are for) next to the nearest port USB power light lights up as follows: one on the left (as you are looking at the right side of the laptop) is white; the right one is orange.  Both are fully illuminated, (not vaguely that the power light).  The power light is not as bright as the other indicator white located near the USB port.  The laptop started and seemed to be running once since this problem started, but I was not able to start again.  I'm told the battery is bad (it's my brother in law book), but it is possible that the problem is with the power source rather than the processor or motherboard?  I appreciate your comments/advice about this.  Thank you.

    Hi fejevitzky,

    Your question, "according to that, I think you're telling me you don't think it's the BIOS - is that correct?" Yes, as long as you don't see any "white" light reveals LCD bezel back while with the State of the white screen. Bezel LCD's coverage around LCD, most design put modeule LED in the lower corner next to the LCD. While the backlight is not during the boot sequence, which means system doesn't have chance to get BIOS current enforcement program. It also means, he stuck to the condition of the equipment to set up. Normally this motherboard related.

    Quickly, I checked hp.com and found a link that may help. Or 1-800-HP-invent (1-800-474-6836) can save time. This forum only intends to answer fast/just the users questions. On another charge of repair and maintenance, I have to give you other links to achieve.

    HP Partner and Store Locator: (I try to search for your city, but it does not work well.) Suggest that call you for a quick response)

    http://WWW8.HP.com/us/en/store-finder/index.do

    Contact information:

    http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

    Contact HP:

    http://WWW8.HP.com/us/en/contact-HP/contact.html

    HP SmartFirend Services: (I saw with the price of the service)

    https://h30617.www3.HP.com/HP/home/index.asp?JumpID=in_r11682_us/en/HHO/PPS/suppgateway_gi_ob_ds_pd/smartfriend_cc/DT

    Thank you very much. If you think that my answer helps your product, please help to close this case once you feel comfortable. Then, click on "CONGRATULATIONS."

  • HP Pavilion dv6 - black screen on startup, but works using the secondary monitor?

    I use a Pavilion dv6 WV815AV, and I used it for 3 years now.

    I tried to start the computer and the fan and lights are lit, but not the monitor.  I tried to plug in my high school, and it's that now treats as if it were the only screen.  I had problems in the past of a few times where I would get past the HP logo, and then there would be a substantial delay where the screen remains black but be illuminated, but most of the time that he would go to the screen connection, and if not, a simple reboot managed to solve the problem.

    Thoughts on how should I solve it?

    Thank you!

    Hi mybluesock, sorry to hear that you have a problem with the monitor not just not. I did some research and I found a document that can help you. Click on the link for the document.     http://support.HP.com/us-en/document/c01997899

    If this does NOT resolve the problem, please do not hesitate to write back and I'll do more research on the issue.

    Thanks in advance

  • HP Pavilion dv6-6c13cl: what order I reinstall the drivers, the hardware and software?

    I had to reinstall Windows 7 on my Pavilion dv6-6c13cl.  I would like to know how can I reinstall the drivers, software and hardware?

    I tried to reinstall yesterday and I could not restore internet connection with Wifi.  Your help would be greatly appreciated.

    Thank you

    HH1238

    Hello:

    Here is the link to the ethernet driver on your laptop support and driver page...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102406-1&cc=us&DLC=en&LC=en&OS=4063&product=5218506&sw_lang=

  • Pavilion dv6: recovery disc creation-help

    Hi all! I've a questione.and I hope that someone can help me. I would create a creation of... hp recovery disk recovery disk but when it gets in the first screen "Welcome to the recovery disc creation and I click on 'next'... and a call to error window with the Message that there is no free space in the partition of sistem.» But in the score system is only recovery... that ' s the solution for creatina a recovery disk? Thanks for the reply.

    Hey @Alessia_to,

    Before I provide documentation of troubleshooting, I would like to take a few minutes to welcome you to the community of Support HP, where you can ask questions, find solutions and get help from others in the community! I read your post and see that you need help creating recovery disks.

    Here is a document for you to read called create recovery discs or record a recovery Image on a USB Flash drive. I pulled some information in the document for you. The first thing that I would like to share with is only DVD-R, DVD-R DL, DVD + R or DVD + R DL disks are compatible with the design of recovery media program. The next disk types are not compatible with the design of recovery media program:

    • CDs
  • Pavilion dv6: HHD disk failure

    OK, so my hard drive has failed and so I can't fix anything, because everything that is stored on the hard drive in question. I want to know is if I buy a hard drive of the replica somehow get access on the failed hard drive to transfer all the data directly from the old to the new (think of the old drive hard does not start to read)
    And the Doctor error code for the error log is two
    60C27S - Q 5, 3813 - QFPH5F - 60RV03

    What precisely what it means and it's somehow fixable?

    Thank you for your time invested and trying to direct me to a solution, in my case I tried everything but the hard drive from the point of view of mobile was very dead and unrecoverable. However, in the hopes that it helps others, I was able to arrive at a solution alternative and here's how.

    I took the hard drive of my laptop and put it in an external enclosure, effectively changing to an external hard drive, at this time he was recognizable by another mobile work however the formatting. I did essentially wiping every bit of data on the hard disk (this removes perminently, NEVER RECUPERABLE) at this point, I had a black disk and so I just installed a new version of Windows on the drive in my laptop and Windows update did the rest (found it necessary to downloaded and installed all the drivers) this brought the laptop in working condition , in the end I lost everything there, but as a plus, I had a fully functional laptop. Councils have the work laptop check the HARD drive for bad sectors and recover if possible.

  • HP Pavilion dv6-1242tx: updated driver required but not available to HP support.

    I noticed that my keyboard returns incorrect symbols as I type. A case occurs when I hit shift-2 poster 'symbol' instead of @. My PC has a QWERTY keyboard, and I am currently using regional (UK) English, the input parameters and the format.

    Also, when I go into my control panel / devices and material, I see the error message that is associated with my PC:

    Status: Driver is not available

    Status: Driver error.

    I have checked with the help of HP but have found that the driver for my model number and the operating system is not available.

    Can then someone suggest a source for a driver or a workaround?

    I noticed the warnings in support of HP related software vendors claiming to be affiliated with HP, so I thought I would ask this forum before you search the web.

    Thank you for your consideration of my problem in advance.

    Hello

    If the @ symbol is SHIFT + 2 key, then you have a style WE keyboard (the ' is on shift + 2 on a UK layout).  For this to work properly, you must select the United States keyboard layout - you can change your keyboard layout, as described at the link below.

    Change of keyboard - Windows 8

    Kind regards

    DP - K

  • Drivers/software for HP Pavilion dv6-6172nr notebook PC

    Hello

    I'll try to find the drivers and software for my HP Pavilion dv6-6172nr Entertainment Notebook PC but can't seem to find the link. Whenever I get an error that this perticular model was not found on the HP site. I try to access to that of the United Kingdom.

    Thank you very much

    Hello

    You can find your product on the link Page notebooks.

    http://h10025.www1.HP.com/ewfrf/wc/product?product=5193743 & LC = on & CC = US & DLC = in & Task =

    Kind regards

    DP - K

  • I get not much sound on my pavilion dv6 notebook

    I bought my Pavilion DV6 two months back. But the last 15 days I only get much sound. (sound out put is very less)

    Hello

    One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

    Kind regards

    DP - K

    

  • HP PAVILION DV6-7006ED battery replacmented failed

    Hello people,

    so I bougt garage a new battery for my HP PAVILION DV6-7006ED, HP MU06. But after I received the item, I noticed that he was not inside the laptop.  But accoarding to this site, it must be ablte to adapt, or it's me and I got all wrong information?

    http://store.HP.com/wcsstore/hpusstore/treatment/HP_Laptop_Compatibility_2011-2013.PDF

    @Elx,

    Hello and thanks for the display on the HP support forums.  For me to answer your question, I would need the full model and the product number of your laptop... Here is a link that will help you find this information.

    Computers how can laptops HP - I find my model number or product number?

    Thanks again for the post and I hope to hear from you soon.  Have a great day.

  • Pavilion dv6-3173ee: supported booting UEIFI

    Hello! How can I activate ueifi in charge starting on my laptop, you provided ueifi load startup pavilion dv6 models of bios update, but I can't find my model trial, thanks to ueifi for my laptop

    Download of UEFI PC Diagnostics support for your laptop is available on the following web page

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4301237#N9012

  • HP Pavilion dv6-6170ee update

    Can I put HP Pavilion dv6-6170ee to 16 GB of RAM?

    Hello

    The following link shows its specifications:

    http://support.HP.com/us-en/document/c02982007

    8 GB is the maximum. BUT Crucial to a similar machine:

    http://www.crucial.com/upgrade/HP-memory/Pavilion+DV6+series/Pavilion+DV6-6170us-upgrades.html

    but not the following:

    http://www.crucial.com/upgrade/HP-memory/Pavilion+DV6+series/Pavilion+DV6-6172nr-upgrades.html

    Confusing isn't. To be on the safe side, I'd follow the specs.

    Kind regards.

Maybe you are looking for