HP Pavilion dv6t - 6 c 00 GPU update

Similar Questions

• Pavilion DV6T - B 6, 00 QuadEdition: update my centrino N-1000 wireless card (do you want with bluetooth)

  I want to improve my wireless card, currently Intel Centrino N-1000, one with bluetooth. I saw a lot of people do and replace it with an Intel Advanced-N 6230 on different computers, but I am also aware that this can cause problems with my BIOS. If anyone can tell me if it works with my computer

  I have a HP Pavilion DV6T - B 6, 00 Quad Edition CTO Entertainment notebook PC with

  Core i7-2670QM CPU @ 2.20 GHz

  8 GB ram/memory

  Intel 3000 Graphics and AMD Radeon 6770M

  Running Windows 7 Professional, although I would not want to mess with dualboots and other operating system a few times

  I'm open to suggestions of any other wireless cards that have built in bluetooth because I hate the external bluetooth dongles.

  I have (of course the HP modified version of) Insyde H20 Bios F.1C

  I wasn't able to find the required information on the HP website for the life of me!
  If someone could help me out, I would be really grateful!

  Thank you

  -Nick

  nickhilgupta wrote:
  Do you happen to know which card will work?

  I don't think that any card WiFi dual band (5 GHz) will work. The best option for you is Intel 1030. It's the same chip as the 1000 but combo with bluetooth. Reference number: 631956-001. This part number is indicated in the manual as Intel 6230.

• HP Pavilion dv6t - 6b 00: updated HP Pavilion dv6t - b 6, 00 motherboard

  I have a

  HP Pavilion dv6t - b 6, 00

  There the i5 2430 m processor and the graphics chip from AMD Radeon 6700 m.

  I was wondering if anyone knows of an upgrade, with that I can replace my current mobo. Preferably with a quad core processor and a better graphics chip. It doesn't matter if it's a graphic processor AMD or Nvidia. It takes a processor intel.

  Thank you for reading and information available to you.

  Hello

  Please see page 86 of the Guide Service and Maintenance on the following link:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5145688/model/5169494/manuals

  Note: Please order part of HP and on the safe side only use CPU with the same power.

  Kind regards.

• w2207h monitor and Pavilion dv6t

  I have a new Pavilion dv6t Select laptop running WIndows 7 64 bit directly connected to a monitor in w2207h 22. It does not preserve the configuration of display resolution when I power it back up again.  Before he turned off had a resolution of 1680 x 1050 configuration, small icons, and other parameters, the first two being those that I am more interested in maintaining.

  I used to have a laptop no HP on a docking station connected to this same screen, the old laptop had no problem to recognize the resolution that I put up on the screen.  In fact, all I had to do was power up and presto.

  My new dv6t does not keep the display setting unless I do the following:

  (1) I opened the lid of the laptop and start it (if it is extended or not standby mode)

  (2) when he us operational, the monitor looks different (large icons, fuzzy fonts, lower resolution).

  (3) I use the F4 key to tell him that I have duplicate monitors.

  (4) the monitor then displays the appropriate resolution.

  If I don't tell her to do with the F4 monitor rest at the wrong resolution (for example (for the larger icons, fuzzy fonts, a lower resolution).

  I'm annnoyed enough I need to power my laptop by opening the cover when it is connected to the monitor, but now I have to do the extra step of the F4 to get the external screen is displayed correctly.

  Any ideas as to why the monitor does not display the appropriate resolution when I turn?

  Thank you!

  Yes.  It's good information. Thank you.

  Try using the latest version of the ATI video driver.  Don't forget to create a system restore point before updating the pilot arrived that something goes wrong.

  Look at the bottom of the laptop.  Do you see a sticky HP label with the model number?

• Key Action WiFi does NOT work on Pavilion DV6t-7000

  I just got a new Pavilion DV6t-7000 Quad Edition laptop, and the first thing I did after I boot the system was to upgrade the operating system.  I have an MSDN subscription, so I've upgraded to Windows 8 Pro (RTM).  Everything is great... except for the WiFi button.  It does simply not to turn on or turn off the WiFi connection.

  It always shows a white LED while the WiFi is on, and pressing the button does nothing.  Other action keys may work... the brightness, mute audio, etc.  If I disable the WiFi in the network Panel, then the light turns red.  As if she recognizes the WiFi it's takes no action to actually turn on or turn it off.

  I updated the BIOS to the latest version, by the site of HP support for the 64 bit of Windows 8 OS, and I checked in the BIOS action keys are enabled.

  Can someone help me get this to work?

  Thank you!

  -Andrew

  Have you tested it before loading Windows 8 on it?
  
  Support of thing going before interview, that Windows 8 drivers are available or not, is to perform a recovery to the original embedded operating system.
  
  If it is a fault, the question would be present in the original Windows 7 operating system as well. I suspect that this is largely a software/driver problem.
  
  Also, I recommend the update to the BIOS before installing Windows 8. Windows 8 installations work differently with the BIOS that previous versions of Windows, so the end result would be different to reinstall Windows 8 from the version of the BIOS is different this time.
  
  However, I recommend he get back to Windows 7 in order to ensure all features is present.
  
  I know you probably don't want to go back in the recovery efforts there to Windows 7 and then put 8 on.
  
  By chance, you did the recovery disks for your system first? If this is not the case, they must be ordered from HP. You can try to use the Recovery Manager to create, but I don't know if it will work since the operating system has been modified.
  
  In all cases, whether it works or not with the original software, she shipped will help determine if it is a defect or not. More than likely, it is not and is only a matter of unfortunate compatibility with Windows 8.

• HP Pavilion DV6T-3000: what are the processor i7 can this motherboard can I go to?

  Hello

  I'd like to update my CPU, but don't know which are supported by my motherboard.

  I have a HP Pavilion DV6T-3000 series.

  Part of the motherboard: 615278-001

  Original CPU: i7-720QM

  In the dv6 manual (link below), it is mentioned that the Intel Core i7-740QM, i7-820QM and i7-840QM can used in general by computer laptop dv6, but it's not to specify which processor when with the motherboard.

  http://www.HP.com/CTG/manual/c02657339.PDF

  I would like to used the upgrade to i7-840QM, or at least i7-820QM or same i7-740QM as last resort.

  Will be my motherboard suport it?

  Thank you

  See page 22 of the manual here:

  Manual

  Unlike compatibility processor only in motherboards, it's that there are motherboards for dual core and Quad Core boards. If you have a Quad Core, you can install any other Quad Core. These mobile Intel Core i7 1 genQuads always tends to be expensive and I don't know how much delivery must be done by replacing one such Quad Core for another. The base clock speed increase would be only 1.6 to 1.86 ghz, which is not terribly important. On eBay the i7-840QM is still ongoing for over $ $100 and for that price you approach the cost of a 500 GB SSD, which would provide a lot more help to your user experience.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• upgrade HP Pavilion dv6t - b 6, 00

  Hi all

  Honestly, I have very little knowledge on the computer, so please excuse me if my questions may sound stupid to you.  I am looking for a laptop for the end of the game, and decided instead to buy a new, hopefully update my only current.

  I want to improve my HP Pavilion dv6t - b 6, 00 in terms of memory, hard drive and even CPU processor and graphics (if possible).

  I have read the manual in PDF and have led to several questions.

  1. He is described in the manual that I can improve my memory from 4 GB to 8 GB. But when I opened the top of the laptop, it seems to me that there are 2 slots for memory bars. Does this mean that I can spend a total of 16 GB of memory (2 x 8 GB)? And what type of memory who adapt and increase the performance of my machine?

  2. on the hard drives, I currently have the HTSS547575A9E384 from manufacturing with 750 GB, 5400 RPM Hitachi. I wonder can I replace it with a hybrid drive SSD or a SCSI one or at least a 7200 RPM with top cover? Which do you think it would be a better option for me?

  3. the graphics card I have currently is the Radeon (TM) HD 6490 M, and I would be upgraded to a Nvidia one.  It does not show on the manual how to remove and replace the graphics card. Can you please let me know to replace and what kind of options do I have?

  4. I would also like to upgrade the card on my laptop wireless in the hope of improving connectivity. I currently have an Intel Centrino Wireless - N 1030 (model: 11230BNHMW) installed on my laptop. Can I replace it with an Intel Dual Band wireless-N or AC one? On the market at the moment there is a card wireless with bluetooth module as well, so if I install one of them, it would affect my bluetooth connectivity?

  5. Finally, on the processor CPU, my laptop has the Intel Core i7-2670QM. If I want to update, should I replace the motherboard and graphics card also? Can you please show me what choice do I have?

  I really appreciate your time and your help.

  Better compliance

  Deryck Ng

  1 memory. You have the Intel version so the maximum is 16 GB (2 x 8) and your laptop uses DDR3-1333 and this type will work:

  http://www.Amazon.com/634091-001-parts-quick-notebooks-PC3-10600-1333MHz/DP/B008I6LNZY

  4 concerts for 16 concerts will be a major upgrade according to what you are doing. 8 concerts would probably be a lot and much less expensive that you just add a 4 GB module. For the money by adding a second module of 4 gig is your best update you will get a double benefit of total RAM increased and a two-channel operation, transfers of memory are perhaps 8 to 10% faster.

  2 disc. Yes, the drive 5400 RPM holding back you. You can not install a disk scsi hard. Your interface is SATA. You can install a mechanical drive of 7200 RPM, a hybrid car or a full disk solid state, one of which would be a big improvement, the SSD improved considerable, but at a cost. Post back with your budget and we can give you the best options.

  3. no update video card is possible. This is why the manual does not because there is no such thing. It's a chip welded directly into the motherboard.

  4. wireless. HP seriously limits the wireless options, but there is a Centrino Advanced-N 6230 option that is a map of 2.4 or 5 ghz "N". See Page 59. You buy exactly the card HP with a part number of HP.

  http://www.eBay.com/ITM/Intel-Centrino-advanced-N-6230-abgn-WiFi-Bluetooth-3-0-wireless-card-/171367189306?PT=US_Internal_Network_Cards&hash=item27e647cb3a

  5 CPU. It is the strongest and best you can install.  Intel® Core® i7-2860QM 2.50 GHz (turbo SC until)
  3,60 GHz) processor (FSB 1600 MHz, 8, 0 - MB L3 cache, dual core, 45 W). Frankly, not worth the significant expense and difficult. The CPU you can already be very capable.

  None of the improvements that I suggest will turn your laptop into a game machine. If that's your goal, sell your laptop and apply the product with something that has the features you need.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Install WD Black2 Dual Drive on a Pavilion dv6t-7000

  Hello

  I recently bought a new internal hard drive for my HP Pavilion dv6t-7000 CTO Entertainment Notebook PC and have some difficulties to install the drivers for it. I bought a Western Digital Black2 Dual disc, which is a hybrid disk with 120 GB SSD and 1 TB of HARD drive, but I can't access the 1 TB because the installer for WD drivers keeps returning an error code.

  After much digging, I found documentation of the WD site that States the particualr error I received was due to one) the SATA mode to RAID in the BIOS, or b) an Intel driver a RAID reporting configuration. I can not check the BIOS settings myself, because the tab in the BIOS for this is hidden and locked down due to the fact that I'm working on a laptop of HP (I found answers on the forums for models with slightly different laptop computer that reported the AHCI is the default SATA for HP laptops) (, but unable to verify for my particular model). However, I was able to find an Intel driver that can cause the problem in the Device Manager. It is listed under 'Storage controllers' and is called 'Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller '. When you contact the service customer of WD, the representative has tried to help me change this default Microsoft Inbox Driver by following the process: (right click > update driver software > Browse my computer... > choose from the list of device drivers). Unfortunately, it was not useful because the afforementioned Intel driver is the only one available. I was a bit puzzled by that because I installed windows 7 from scratch, only adding the drivers from the HP site needed to establish a wireless connection to download the installation of WD software.

  So basically I'm looking for help in these areas: a) to determine the particular my laptop model SATA mode, b) to understand why I have the default Microsoft Inbox Driver, c) installation of the Microsoft Inbox Driver default value or a Variant that works with AHCI, and/or d) any other course of action I could take additional troubleshooting.

  Operating system: Windows 7 Home Premium 64-bit (installation costs)

  Laptop model: HP Pavilion dv6t-7000 CTO Entertainment Notebook PC

  Hard disk: Western Digital Black2 Dual Drive

  Error: A bad SATA mode in the BIOS or reported by the Intel driver

  Pilot suspect: Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller

  Thank you kindly,

  Gorkycreator

  This problem has been resolved in a more precise message than I did in the operating system of your laptop and drivers support forum.

  Here is the link:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-SATA-storage-driver-HP-Pavilion-DV6/TD-p/3970552

• HP Pavilion Dv6t 2000 CTO-two unknown device

  Hi all

  My laptop is HP pavilion Dv6t 2000 CTO, product no.: NQ615AV, run the Windows 7 64-bit operating system.

  It has two unknown device:

  1. PCI Express Root Complex
  2. Intel PM55 Express Chipset LPC Interface Controller - 3B 03

  Driver status: code 28.

  I haved installed driver: audio, graphics, Player cards, chipset (sp45629), quick launch.

  Please help me!

  Thank you very much.

  The Unit came with Windows 7, or is it upgraded to Windows 7? If you upgrade, what was a facility on the spot or own?
  It was like that out of the box, or was it a recent development? Nothing changed at all before that? It is strange for drivers just disappear.

  Have you tried to use the automatic update of the Intel driver? If not, go here and select it. It must analyze and find the drivers for the listed products that both are involved with the motherboard and chipset.

• HP ENVY CTO 7300 dv6t Quad Edition Notebook PC updated bios - win7

  Hello...

  I WANT HP dv6t-7300 CTO Quad Edition Notebook PC , it came with win 8 that I demoted for win 7, I received my drivers of HP Pavilion dv6t-7000 CTO Entertainment Notebook PC.

  I have problem of heat and I want to update Bios, the current version: Insyde F.29 03/10/2013.

  He tried to update pavilion dv6t-7000 me gives error message:

  .. . How update the bios?

  You don't Flash the BIOS unless you get the upgrade for the BIOS of the page of CTO Quad Edition Notebook PC drivers HP ENVY dv6t-7300. Since there is no upgrade BIOS listed on this page, there is no way to upgrade the BIOS. Depending on the exact systemboard and the OS that is installed on your computer, the HP part number will be something like "682174-501", which means "Windows 8 Standard / 2.0 GB of discrete video memory / 45 Watt CPU. The comparable numbers for the dv6t-7000 series is 682174-001, which means "Windows 7 / 2.0 GB of discrete video memory / CPU 45 watts.

  The MAIN of the BIOS is different version, the routine will not allow BIOS flash. IF you force it, you can make your computer does not work. DO NOT try to Flash a BIOS that does not support your computer page.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• 614332 001, pavilion DV6T-3000: front drive 614332-001

  The CD/DVD-writer / optical drive Blu - Ray Player in my laptop Pavilion DV6T-3000 died. The reader sends is more a signal to the computer when a disc is inserted. So if I try to access the drive, I get the prompt telling me to insert a disc and insert any type of disc, the computer never realize. This prompted me to update the player to the type I always wanted, but which, for some reason, I was unable to order originally, namely the CD/DVD/Blu-Ray Writer, part number 614332-001. I bought a new drive and took the defective drive. Now, I need to transfer the bezel from the old drive to the new, which has only a thin cover, simple door. I'm sure it remains the way to go, but I don't see any screws, and I don't want to break anything by forcing the plastic parts. Can someone guide me here, preferably with pictures or video? Thanks in advance.

  John

  I would try to add a few photos...

  

• HP Pavilion dv6t-6100 CTO Quad problem with graphics switchable

  -HP Pavilion dv6t-6100 CTO Quad

  -Win7 64-bit

  -Can not pass an Intel HD 3000 and Radeon 6770

  I recently had a problem with my computer that I solved it by using a recovery disk to do a clean install of windows.  When I was running, I noticed that when I right click on the desktop I no longer get the switchable graphics configuration option.

  I started by redownloading from the site Web of AMD catalyst control center.  For some reason any installing this forced my resolution of 800 x 600 instead of 1366 x 768.  I drove back on two graphics cards drivers and that fixed my resolution.  I went to the HP website and updated all drivers related to graphics cards.  However, the CCC gave an error message saying that it detects all the drivers AMD.  At this point, I uninstalled CCC and other AMD software on the system, and I'm a little stuck.

  I can't download CCC again because it seems to mess up the resolution, but it seems to me to need to change graphics cards.

  Hello TacitRonin,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you are not able to re - install the CCC that there is a problem with the resolution with its installation, and I'd be happy to help you!

  To re - install correctly CCC, I recommend to delete the entire AMD driver on your computer and re - install. To do this, remove the software from programs and features.

  Once the driver is then deleted, please remove the driver from Device Manager by following this document on Uninstall or reinstall a device. This should help to re - install your CCC program to your laptop.

  In addition, I also suggest to use the re HP Recovery Manager - install the supplied with your laptop original drivers. This can done by following this document on the use of the Recovery Manager to restore the software and drivers (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• HP Pavilion dv6t - 6 c 00 laptop can't see the connection of 5 GHz.

  Hello, I just got a router dual-band Time Warner Cable I want to connect wirelessly with my HP Pavilion dv6t - 6 c 00 CTO Quad Edition Entertainment Notebook PC I've had for 2 years and a half now. The laptop has no trouble to see and connect to the 2.4 Ghz band, but has not yet seen the 5 GHz. I tried to play with the settings of the router, but had no luck so far. I think he should be able to see it, but I'm not 100% sure.
  Anyone know if I need to update my drivers or anything for it, so you can connect to 5G? Or maybe buy a new card network or adapter? Or I'm offline at 5 G lucky?
  All comments, suggestions, ideas, would be greatly appreciated!
  Thank you

  -T7K

  You are the very welcome.

  Yes, you are on point.

  If the card is a dual-band card, you would see the suffix abgn or agn

  Unfortunately, the Realtek card in your laptop computer is a single band card as evidenced by the bgn suffix and only works on the 2.4 GHz band.

• Unable to wake up after sleep - HP pavilion DV6t - aiu55av - 9

  Unable to wake up after sleep - HP pavilion DV6t - aiu55av - 9

  tried on different keys-ctl alt - del - nothing works

  You can also view the latest BIOS update for your machine. Use the link at the top of this page-"Support & Drivers" - to find your support page templates.

• HP PAVILION DV6T-7000 (A5F76AV)... Display and keyboard

  Hello

  The screen of my laptop [HP PAVILION DV6T - 7000 (A5F76AV)] is not good vewing angles, he shattered a lot. Is it possible to update the screen? I think it's a type stantard of HD with a resolution of 1366 x 768 px, and hopefully upgrade to a WUXGA anti glare screen with resolution 1920 x 1200 or 1080 px.

  I checked hp'partsurfer and I guess that's what I was looking for: (682068-001SPS-DSPLY HU 15.6 FHD AG ALU DSC)

  I am currently in Saudi Arabia. Please can you me if the display can be updated here?

  Apart from that the keyboard has a backlight. Can I set the keyboard to a backlit keyboard?

  Thank you.

  Hello Ryan-7,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that you are looking to upgrade your screen and keyboard. I'll give you the best information I can to help you! As a reference, I'll give you this product maintenance and care guide.

  Here are all the views available for this laptop, with a description:

  the display Assembly 15.6 inches

  For use on all computer models:

  display block 15.6 inches, glare, FHD aluminium finish: 682066-001

  15.6-inch BrightView HD display, aluminum finishing block: 682065-001

  For use only with the computer models equipped with an Intel processor:

  15.6-inch, non-glare, FHD display Assembly in aluminium finish (to be used on computer

  models equipped with a graphics subsystem with discrete memory): 682068-001

  15.6-inch, non-glare, FHD display Assembly in magenta finish (to be used on computer

  models equipped with a graphics subsystem with discrete memory): 685985-001

  display block 15.6 inches, glare, FHD in magenta finish: 685983-001

  15.6-inch BrightView HD display, aluminum finishing block (to be used on computer

  models equipped with a graphics subsystem with discrete memory): 682067-001

  15.6-inch, BrightView, HD displays Assembly in magenta (to be used on computer finishing

  models equipped with a graphics subsystem with discrete memory): 685984-001

  15.6-inch BrightView HD, display the Assembly in magenta finish: 685982-001

  Here are all the available keyboards that are backlit:

  Keyboard with backlight (including backlight cable):

  For use on all computer models to the United States: 682081-001

  To be used on the computer models equipped with an Intel in Saudi Arabia: 682081-171

  To be used on the computer models equipped with an Intel in Belgium: 682081-A41

  To be used on the models of computer with an Intel processor in the Netherlands: 682081-B31

  One bold is the one that is available in your area, to make it easier for you. To order the part, simply call HP.

  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns. Thank you for choosing the HP Forums. Have a great day!

  Mario