HP Pavilion dv6t - 6b 00: updated HP Pavilion dv6t - b 6, 00 motherboard

Similar Questions

• Pavilion a250n: how to replace motherboard Pavilion a250n

  I want that on my motherboard on my a250n desktop pc. I need some guidelines on how to make lthis.

  Hi @oudeis,

  HP has more a lot of documents for this model of computer, as the age of 13.

  I found and motherboards to change to another computer, but the process must be close.

  Please look at Pavilion p7-1000 series desktop computers - replacing the motherboard.

  I hope this helps. Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Pavilion 15-n027sl: type of motherboard and RAM upgrade

  Hello world
  
  I would like to know the maximum amount of ram (and type) that can be installed on the pc of my father, a 15-n027sl Pavilion. At the moment it has 1x4Go slots DDR3L 1600.

  Furthermore, the pc has two slots, but I noticed that the a slot does not work: when I put the ram in the second, the pc has not begun. Can someone help me?

  Thanks in advance

  M.

  @TheAcrobat

  Two SODIMM memory customer accessible/upgradable module slots

  Support DDR3L-1600-MHz dual channel

  Support of the DDR3L-1600-MHz single channel

  Supports up to 12 GB max memory system (module DDR3L 1600 MHz), (some models only)

  Supports the following memory system configurations:

  ● 12288 MB (8192 x 1 + 4096 MB x 1 MB)

  ● 8192 MB (8192 MB × 1 or 4096 MB × 2; not supported on models of computer with the 32-bit operating system)

  ● 6144 MB (4096 MB × 1 + 2048 MB × 1; not supported on the computer models equipped 32-bit operating system)

  ● 4096 MB (4096 MB × 1 or 2048 MB × 2)

  ● 2048 MB (2048 MB × 1)

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c04439615

  NOTE: If you want to add or replace the memory in your computer with a unique memory

  module, insert the memory module into the location further away from the system board.

  NOTE: To use a double-channel configuration with a second memory module, make sure that both

  memory modules are identical.

  REO

• Pavilion dv6-6138nr replacing the motherboard

  Hello

  Does someone knows the model of motherboard Pavilion db6-6138nr, product: A3X37UA

  the motherboard is version intel with processor i5 and Winodws 7 home.

  The God of the motherboard damaged because someone falling water on the laptop.

  Y at - he neither allows for the damaged thus processor?

  jomebeva wrote:
  

  Hello

  Does someone knows the model of motherboard Pavilion db6-6138nr, product: A3X37UA

  the motherboard is version intel with processor i5 and Winodws 7 home.

  The God of the motherboard damaged because someone falling water on the laptop.

  Y at - he neither allows for the damaged thus processor?

  Hello

  The CPU will be fine as it is on the lower side of the motherboard. There is more compatible motherboards for the laptop. I suggest to consider an upgrade because you have to disassemble everything laptop anyway. The motherboard is probably for that dual-core (i3/i5) computer laptop and some dual core i7 chips.

  Is the part number for the original motherboard: 641485-001
  It is possible to improve this laptop with an i7 processor with dedicated graphics ATI Radeon HD6770M 2 GB RAM video card. However, it requires a different heatsink. Board reference number: 650799-001 and the heatsink: 650797-001.
  Manual: http://www.hp.com/ctg/Manual/c02842252.pdf

• Pavilion 17-e119wm graphics card/Motherboard upgrade

  I was wondering how much it would cost to replace my motherboard for computer laptop 17-e119wm of Pavilion. I want especially to do it for best game performance. I read the PDF on motherboards compatible but im wondering is it really woth the cost or it's too?

  PDF file: http://h10032.www1.hp.com/ctg/Manual/c04069163.pdf (just look at pages 14 and 15)

  IM interested in the: switchable graphics: ● dedicated AMD Radeon HD M 8670 (64-bit), the package M2, 28 nm, 25 W, 4 pcs of video memory (2 GB VRAM 256 MB x 16, DDR3, 1 GHz × 4 pcs)

  ● dedicated AMD Radeon HD M 8670 (64-bit), the package M2, 28 nm, 25 W, 4 pcs of video memory (1 GB of VRAM, 128 MB × 16, DDR3, 1 GHz × 4 pcs, 1 GHz, 900 MHz bridge) support for HD decoding, DX11 and HDMI Support for PX5.5 (supported for use on models of computer with Windows 8.0)

  or the: Dual graphics: ● AMD Radeon HD 8650 G + graphics card dual 8670 M HD on computer models equipped with a processor AMD A10-5750

  I would like to know more information / advice on any one of them please

  and side note is worth it to upgrade because of ram 16 GB on other sites it is said that it can, but on this one, it can:

  http://scripts.crucial.com/store/mpartspecs.aspx?mtbpoid=79300CCEA5CA7304

  This should be good:

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=118AB5CC382746128532DFE971F9CE31&SearchIn=PartNumber&SearchPN=737131-501

  If you return to the home page simply paste in this exhibit: 737131-501

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• The size of the Pavilion HP8565C battery on the motherboard

  I would like to know the number of the stack, which is located on the motherboard of my Pavilion HP8565C desktop computer...

  The part number of battery for most desktop computers is CR2032. However, most of the manufacturers do not, list in their online form, the exact type and model of battery required. Therefore, when you locate the battery, note information on the battery (voltage, chemistry, packaging and wiring part number). If possible, remove the battery and take it with you to buy a new spare battery. Try the target (electronics or jewelry), Wal-mart (jewelry or electronic), Radio Shack or a battery specialty store.

  Frank

• Pavilion Slimline S-1554: what motherboard would buy to replace HP slimline S5-1554

  I have to buy a new motherboard for my desktop computer.  I think that I can install and connection to the top, I just don't know what to buy.

  @mbkinzey, welcome to the forum.

  Here is a page on ebay with some of your motherboards.  You must make sure that the part number for the one you choose matches your.  The reason why I recommend to replace it in kind, it is HP motherboards belong to someone who makes it possible that some of the connectors and the spreaders case will not match.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Pavilion 500: 6 beeps continuous motherboard when GTX 460 is installed and computer, no signal to monitor

  I recently got a gtx 460 s decision-making and wanted to put it in my computer, I have a different diet that is 700 watts and the two connectors 6-pin at the back of the computer, the card is also sitting (re-sitting several times - not the question) I also I added more than 8 gigabytes of ram to the motherboard, I tried to remove it and start the computer , but it still sounds. Also, I can't access the bios because the monitor receives no signal.

  the question I want to know is, have all the required connectors? because it seems that there is an another slot of tiny psi on the top of the card and also if my motherboard only supports the card.

  Thank you

  Hello:

  If your PC comes with Windows 8, 8.1, or 10 of the plant, you need to change two parameters of the BIOS before installing a video card no HP.

  Please see this link for which parameters to change.

  http://support.HP.com/us-en/document/c03653200/

• Pavilion 15: get a new motherboard

  I need some tips to get a new motherboard for my laptop (if possible).

  Here are the specifications of my laptop:

  Model--> 15 number - e052se

  Product number--> E0Y23EA #ABV

  Operating system
  Windows 8 64-bit language

  CENTRAL PROCESSING UNIT

  Intel Core i7 3632QM 2.20 GHz 49 ° c.
  Ivy Bridge 22nm technology

  RAM
  4.00 GB Single-Channel DDR3 @ 798 MHz (11-11-11-28)

  Motherboard
  Hewlett-Packard 1970 (U3E1) 52 ° c.

  Graphics
  Monitor generic PnP (1366x768@60Hz)
  Graphics Intel HD 4000 (HP)
  2048MB ATI Radeon HD 8670M (HP)

  OK a few things:

  1. If you intend to upgrade the motherboard, I suggest that you buy the new more powerful laptop. Wise costs & other problems following upgrade, which is wise to do thing.

  2. all compatible cards available for your computer model laptop support max 8 GB

  3. by "more powerful motherboard", if you meant more powerful processor, the compatible HM86 supported Intel card support only i7 4702MQ processor, which will not give great performance gain compared to your current processor - both are quad core, with only slight increase in frequency turbo boost, with the same basic frequency.

  4. the best thing to do is to replace the HDD with SSD. The price will not much bother you since you are already ready for the upgrade of Council in the first place.

  You can upgrade RAM 8 GB 4 GB, put an another 4 GB with the same configuration and preference brand in another location. See manual for the latter.

  Good luck!

  Concerning

  Visruth

• HP pavilion dv9000-class action lawsuit-motherboard questions

  I said the dv9000 series is listed on the class action, but I can't seem to find the registration to get a replacement for the motherboard.

  Hello

  In my view, that it is too late now.

  Kind regards.

• I tried to update the drivers that I used my motherboard Asus drive and some how it changes some firmware on the operating system

  OK, my problem is that I don't have a PC before generation. It is a custom build. A week ago while I was trying to update the drivers, I used my motherboard Asus drive and some how it changes some firmware on the operating system. now that is fixed. and now, just yesterday I downloaded the Windows Essentrils to win mail. This morning I woke up and started my PC and I get a red screen saying that some unauthorized to the firmware change has been done to solve this problem, I think I have to erase my hard drive and re to stall my win 7. and how do I do with the disc because it is a refurbished lic. Windows Essentials

  Yes

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Can not update ATI Catalyst & Display Drivers (on the motherboard) for Gateway GT 5676 in Vista 64 bit SP2

  Error message is Manager of drivers Catalyst ceased. Changes to mfc80.dll or mfc80u.dll references

  Hello Bill Sullens,.

  Thank you for your message.  Click HERE and download/install the latest video driver for your computer.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion Media Center M8400f Bios Update for Windows 7

  HP Pavilion Media Center m8400f. The Vista operating system has been replaced by Windows 7 (64 bit) a number of years.

  I've updated one of my hard drives with a SanDisk SSD (it is now my main drive with the operating system and all my files on board).

  The bios on the PC has never been updated.

  The SanDisk SSD dashboard software will not recognize the SanDisk SSD as the system has designated the SSD as a SCSI device. I need to access the bios for this change to AHCI. The current bios does not support this.

  The PC has a card mother MCP61PM-HM. There is no update for Windows 7 BIOS for that motherboard I know (updates Vista only).

  　

  SanDisk gave me a link to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-82094-1&cc=us&dlc=en&lc=en&... that shows a card mother M2P61PM-HM for m8400f desktop PC. This Bios download supports Windows 7 (64 bit).

  Can update the Bios to download safely a card mother M2P61PM-HM for card mother MCP61PM-HM I currently have?

  Hello

  The HP BIOS update link provided SanDisk is an update of the BIOS of your PC. It is listed under Win Vista 64 bit driver downloads here.

  If you look at the site to download the drivers for your PC you'll only see driver support for Win Vista but on 2010-04-08, Version 5.29, 1.47 M BIOS updatedshows support for Win 7.

  But the problem is this: the BIOS updates must be performed using the PC operating system comes with; in your case, Win Vista. Extreme care must be exercised when updating the BIOS under normal circumstances. I would not classify your situation as usual.

  I saw others download an update of the BIOS for their PC and try to install an operating system upgraded with disastrous effects. The PC was bricked.

  Be prepared for the worst case if you try to install the update to the BIOS.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Office 810-150se (Win 8.1)
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)
  Custom build: (Win XP upgraded to Windows 7)

• Adding a 3rd HARD drive to my Pavilion elite m9150f

  I have a Pavilion Elite m9150f with a motherboard Asus IPIBL-LB. I have 6 sata ports, but only 4 are currently used. It has Vista Home Premium 32-bit running 2 HARD sata drive seagate 360 with a partion recovery and 2 CD/DVD players. I would add a Seagate 2 TB sata as main drive (C) both a bigger partion (posibly update of OS in the future) 20 to 25 GB for recovery (D) copied to starting from the origanal and reformat it as a temp for videos, etc. I can do this by moving the SATAS after the cloneing and move the optical drives and see MOBO them without having to make all kinds of changes to the BIOS. Thanks for any advice in doing so.

  Hello

  If you have already two drives hard and two optical drives, then you will have a hard time to find a place inside the PC to secure the third hard disk.

  You could try to use a 5.25 "to 3.5 adapter railsand then fix them and the hard drive down inside the PC. Another option would be to expand the two ports of the vacant motherboard to the I/O back plateand use a drive external eSATA dockthat could accommodate two hard disks that are either 2.5 "or 3.5" or a combination. That would give you great flexibility for the exchange of different hard drives while appearing that they are installed in their own country.

  You should be able to use a hard drive imaging product to the new hard drive the current boot drive. If you use VISTA then I would avoid using a disc hard format model advanced unless you know for sure that the disc produced Imaging align correctly partitions. In any case, if you use VISTA then upgrade to service pack 2 and run this update Intel utility before you install the new hard drive. Utility update driver Intel Intel Driver Update Utility level Bios 5.43is the latest bios for your PC.

  I use Paragon Hard Disk Manager Suite(eval copy) to make the imagery of my hard drive, but there are other products available. Macrium Reflectand Acronis are also good products.

• Pavilion-p6-2494ea: graphics card tips

  I have a question about my graphics card I would like to update, but do not know if my motherboard will work with her etc, my computer is a Pavilion-p6-2494ea. I'm looking to get a MSI R9 390 Games 8 g graphics card , but I don't know if it will work or I need to get anything else on the computer so that it can manage, or maybe a different model card. As I said this computer might be constomised and work with the best brands of graphics back when I got it in 2013, but it was 3 years and the cards have progressed since then. I'm a gamer and I don't know if this computer is right or if I need to look for something else. Advice and suggestions will be greatly appreciated

  @MW_H, welcome to the forum.

  There are two important things to consider when buying a video card: 1) the length of the card / 2) the power to carry out.

  The measures of the map in your link are as follows:

  Dimensions

  3.5 inches x 13.75 in. x 10.75 in.

  You need to measure the space where the map from the backplate will be installed i/o on the front of the case.  This will allow you to see if it will fit.

  The power supply unit (PSU) in the computer is 300W.  You should check the manufacturer's Web site to see how much power the card should work properly.  I love Corsair products.  I recommend at least 500W.  A modular PSU is very good for a small suitcase.  It allows you to use only the cables that are absolutely necessary.  This makes possible better flow of air which is good in a computer game.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.