HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

The router is a D - Link DIR-615 (N300 2.4 ghz)

All this experience? All solutions?

Woo-Hoo.

Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

Tags: Notebooks

Similar Questions

  • HP Pavilion dv6t-7000 - Ralink RT5390 Wireless Upgrade

    Hello

    I'm looking forward to replace my wireless card, I noticed a stamp on my wireless card informing me that I have to replace with HP SPARE, I scanned the bar code "670691-001" and I found that it is the WiFi card Ralink RT5390... can I replace it with the wireless card intel 7260HMW? If not, what other wireless cards my camera supports? 4.0 taken Bluetooth supported if possible.

    Thanks in advance for your answer

    Best regards

    mabusair

    HP Pavilion dv6t-7000 CTO Entertainment Notebook PC - Windows 8.1

    I7-3610QM, 8 GB of RAM

    Hi mabusair,

    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I see that you are looking to replace card Ralink WiFi. Page 52 of Maintenance and Service Guide will show you compatible wireless, the 7260HMW of Intel cards but there are two others with Bluetooth 4.0 support.

    Thank you

  • RALink RT5390 wireless adapter does not work

    My g6 pavilion laptop wifi adapter was not properly work recently. my internet router and networking are works well as it should, but whenever I restart my laptop, repeat me that there is no link and no other wifi networks when there are clearly other networks because of my neighbors.

    I tried a system restore to solve the problem, but it has no effect and my norton affects the restoration of the system to disable the antivirus.

    I'm stuck on ideas to solve this problem and I don't know much about networking and internet stuff, so I'm pretty powerless here

    Here is a link to my features of laptops if necessary:

    http://support.HP.com/us-en/document/c03136241

    These ralink adapters are simple ol ' sh * t. I don't know if it will be a complete solution for you, but I was pulling with my network card for months and this has proved to be the most effective for my computer. I have a HP Envy luck to be equipped with a Ralink RT3290, Windows 8.

    so...

    Out of the box, my computer was working fine and it connected to the network OK. As soon as I moved further away from the router, I known constant dropouts, and the connection always folds between the low signal strength, to completely disconnect the router, where I had to re - connect manually there. This question really frustrating. I use my computer on the top level of my house, and the router is in the basement. If I was getting sick of this fast. Update driver after update driver, no luck. After trying everything under the Sun, I decided I would bite the bullet and I tried something a little bit Orthodox...

    I just uninstalled the driver for my computer. Yes, really. When a component on your computer a driver is stripped, Windows software has a few drivers that will install by default for your material so that it can remain functional on your computer. So, once remove the driver ralink on my computer, windows installed sound driver by default for my network card and... Voila! My connection problems are virtually non-existent at this point. The material is not always the best, but at least I can surf the net in my room without my connection affected by constant stalling.

    Now, other that the light on the button stuck wireless with an orange glow and list my NIC as #10 Device Manager, I always use this driver with minimum questions. Occasionally, he'll forget the connection once I wake the laptop from sleep, but this issue has been much worse with the ralink drivers than without.

    If you are aware of the risk (what is low, to be realistic, this can always be undone and you can always reinstall drivers ralink so that deosn proved to be an effective solution), I will explain in detail how I managed to do.

    (1) open Device Manager (right click the lower left corner in windows 8 and a shortcut appears in the drop-down below)

    (2) find network adapters and display its contents

    (3) make a right click on your wireless network adapter (should be something similar to "Ralink RT5390 802.11b/g/n... ") and click on"Uninstall"in the menu drop-down

    (4) a popup should appear and you should be given the possibility to uninstall or cancel it. Make sure you check "suppression software driver for this device" until you go forward, or Windows re - install the ralink driver.

    -Search for new hardware if your network card is not detected after you have uninstalled it. Your card should appear as "802.11n Wireless LAN card"

    -If you have an installer driver ralink that is newer or equal to the driver that is already installed, you can run the Setup program to remove any driver software remains which is usually overlooked by the device during the uninstallation Manager there from your computer

    -As an option, you can check potential driver leftover files C:\Windows\System32\Drivers. It is important to search for remains that Device Manager / ralink Installer may have missed because it can potentially conflict with the replacement of windows WLAN driver. pilots should have a short name for your adapter (e.g. rt3298.sys); they shouldn't be hard to find. Be careful as well; IT IS WISE TO ALWAYS SAVE no matter WHAT DRIVER SOFTWARE, YOU CAN REMOVE in CASE YOU MAKE a MISTAKE.

    (5) re - enter your information network and you should be good to go!

    I hope that it is of no help to you. People who know nothing about what they will tell you to install the latest driver and yatta yatta yatta this way, because it does not work I had to take the liberty to try to find a solution for these adapters cursed myself. I hope this helps a bit your question!

  • New wireless adapter does not connect to my router

    at home, I have a wireless router WRT120N set up for wireless internet connections, I also use the wireless adapter that comes with it. I recently bought a new adapter wireless like this: http://global.level1.com/product_d.php?id=891 and it connect to the router? Help, please

    I think that the wireless connection on your router may not work properly.

    Create a new wireless network.

    Connect the computer to the router with the Ethernet cable. Open the router setup page and go to the Wireless tab, change the name of the SSID wireless network to create a new wireless network. Change the channel to 11. Save the settings.

    Go to the tab of sup of wireless security and check the security settings. Make sure you have the key/password network correct.

    Go to the sub-tab to Wireless MAC filter and make sure that it is disabled.

    Go into the settings wireless Advanced tab change the interval of tag to 75, RTS and Fragmentation threshold to 2304. Save the settings.

    Now ty to connect to the new wireless network.

    If this does not work then try upgrading/re-Flash the firmware on your router.

    Connect the computer to the router with the Ethernet cable.

    Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page and update the firmware on your router. After upgrading the firmware of your router, reset the router and reconfigure.

    Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

  • MediaTek MT7630E 802.11bgn adapter Wi - Fi does not work in 802.11n mode (mode-N), only G-mode

    A few days ago, I got a new notebook HP ProBook 430 G1. OS: Windows 8.1

    They have Mediatek MT7630E 802.11bgn Wi - Fi adapter inside.

    Problem: I found this wireless adapter does not work in 802.11n mode (mode-N), but works well as in G-mode.

    Some modifications in the parameters of the driver on the Advanced tab are problem solved.

    I think it's a bug of material, or (less maybe) a bug in the driver.

    In other forums, I heard that HP can replace the card wireless, which works well. Is it not?

    You misunderstood me. I meant, of course, all channels from 1 to 13.

    I solved the problem by unistalling completely all the WiFi and software of the device with its drivers from Control Panel.

    Then downloaded latest drivers from site oficial Mediatek.

    In the Advanced tab of the new driver settings option appeared - "802.11n direct mode.

    After you enable this mode WiFi started working in mode N well.

  • Satellite Pro L40 - wireless adapter does not work - Vista

    I recently had some problems with my laptop.
    A couple of weeks, I put in a disc of OpenSuse.
    It's not stable anything, but locked me out of my original Vista operating system.

    I reinstallled Vista Home Basic, but there are a few problems.
    Mainly, my wireless adapter does not work.

    When I flip the button to turn it on nothing happens and it is not recognized in Windows.
    I installed Atheros Driver, but still nothing happens, light is not yet.

    Any advice?

    Hello

    First check the device-> network adapters area manager
    You see the WLan card? Or the unknown device appears?

    If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

    Remember that your wireless network card? Maybe it was a Realtek WLan card?

    If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

  • Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

    original title: wireless adapter does not work with any package of service beyond 2.0

    I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

    Thanks for any help.

    If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

    UTC/GMT is 06:49 on Wednesday, April 11, 2012

  • My laptop Vista with Atheros AR5007 802. 11 b / g adapter does not connect to the internet using the local area or wireless network connections

    I just bought a new router d-link wireless n for my house.  Connect my Win 7 Desktop, laptop xp to Acer and multitude of other devices, but my laptop Vista with Atheros AR5007 adapter does not connect to internet.  I tried to disable IPv6, defining the name of the network, flushing dns cache, etc..  Nothing will work.  (It would not connect to an another 802.11n router in January either.)

    I get local only on both connections Wi-wired and wireless, no matter what I do.
    I'll send this to my office that I can not connect my laptop to the internet and he does not see the other machines on the network.
    Any suggestions from anyone?  I spent hours trying to solve the problems, now completely stumped.

    OK, here was my fix:

    I tried a lot of things, but they do not work.  I downloaded a 'new' driver of HP - it turns out it was the original with the problem.  I found another one that was about a more recent months, still does not work.  I finally managed to get the atheros.cz driver for my card files.  But they do not have an installation file.  I had to search for each old file in its directory, copy it to another place (to be sure, just in case) and then copy and replace the old file with the new file in the original folder.  Fortunately, there were only 6 files, but it took about an hour and a half.  This isn't a lot of time compared to the 18 or if I was just trying to figure out the problem.  Now, my laptop connects to the internet without problem.
    I had this problem with a router "n" beginning of the year in a hostel.  The guy in the Inn told me that he had seen before once.  It's obviously a common problem with these cards (as seen on the "solutions" online) and Vista.  I'm always hating on Vista after this problem.
  • Wireless adapter does not work.

    Original title: wireless

    I install win7 in my fujitsu siemens AMILO Li 1718 model system, all the drivers are installed but I have problem with my wireless, wireless is not see the amything all available wireless driver is installed courrently can someone help me solve this problem

    Hi Amy,

    It seems that your wireless adapter does not work.

    There is no Windows 7 drivers for your model. You can check this link for simple information.

    http://support.TS.Fujitsu.com/download/ShowDescription.asp?SoftwareGUID=689AC3EC-583D-4B7F-8D1A-CED2F9D7EED8&info=FTS

    I suggest you to visit the above link and download Vista drivers for your wireless card. Install them in compatibility mode.

    Refer to this link: make sure to run older programs in this version of Windows.

    http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

    If the problem persists, I suggest you contact Fujitsu support:

    http://Forum.TS.Fujitsu.com/forum/viewforum.php?f=89&SID=1856691d77caf93b0cf1e8058e951cd4

    I hope this helps.

  • My wireless home does not appear on as a network available on my work laptop and always did before.

    My wireless home does not appear on as a network available on my work laptop and always did before.  He brings up and connect on my laptop. I have a Linksys broadband router - summer use it for at least two years with no problems until this.  I know that my wireless works on my laptop because there is an unsecured network listed in the available window.

    A really strange thing that happened two weeks ago (and I don't know if it's related) was my personal laptop was fine during several hours - then he kept abandonment of the internet connection.  I couldn't keep him connected - reboot etc didn't work.  I've not logged again until today - and that's what I use now.  He connected very well today.

    My work laptop had been connected to my wireless ealier in the week, but when I tried to connect as usual Thursday night he has not logged automatically as it has always done in the past.  Nothing has changed.  Security patches that my company had sent through this week have not downloaded until after that I tried to connect and couldn't.  There is nothing new - he had no reason to think I should not have automatically connected as I have in the past.

    Hi suemoo,
     
    -What version of service pack of Windows XP you are using?
     
    This problem occurs because the media connect action is not sent to the wireless service correctly.
     
    Method 1: Disable and then enable the wireless network adapter and check if it helps fix the problem.
    To do this, follow these steps:
    a. start the network connections tool in Control Panel. Click Start, click Control Panel, click on network connections and Internetand then click on network connections.

    b. right click on wireless network connectionand then click disable.

    c. right click on wireless network connectionand then click enable.

    Method 2: Try the methods listed in the following article and check, if it helps in fixing the issue:

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

  • Wireless adapter does not

    recently restored my HP Pavilion DV6-6C35DX, and now the wireless card does not work

    It appears in the device as Realtek PCIe GBE Family Controller Manager

    the hardware id is PCI/VEN_10EC & DEV_8168 & SUBSYS_1805103C & REV_06

    I tried to search for the drivers but can't seem to find a

    any help would be greatly appreciated

    Thanks in advance

    not 100% sure how mark as resolved, but in the meantime eventually, fortunately the pilot

    Thanks for all of you who have seen this, but as I'm sure someone would have helped me

  • WUSB600N wireless adapter does not work if hooked up to Windows startup

    I have the adapter WUSB600N wireless, and I use it with Windows 7 Ultimate 64-bit. I use the latest available driver, 3.0.10.0. When Windows first starts, the adapter does not work properly and is unable to connect to any network, regardless of how long wait. If I unplug it and plug it back after that Windows is already running, I don't have this problem. This does not work when the "reboot" of the machine; only when turning the power off and then on again.

    Do you have an error message when attempting to connect to the wireless network?

    Try to uninstall and reinstall the wireless card and see if that helps you.

  • D Link Wireless Adapter does not work with Windows 7

    I looked in the Windows Compatibility Center and it says my D-Link WUA-2340 wireless adapter is compatible with Windows 7. Our newest computer can see my wireless network, but does not connect. Worked fine with Vista. Then it is compatible or not? I downloaded the latest drivers from the D-Link's Web site, this version is one year old. Support D-link told me that it is not compatible with Win 7. They say that it is not. MS says it's. It does not connect. Anyone know what is happening? I do not have to buy a new adapter.

    Hi Mike,.

    Welcome to the Microsoft Answers site!

    D Link WUA-2340 is compatible with Windows 7, but you will need to download the software of your product from the link below. Select the appropriate Version of the operating system before you download.

    http://tinyurl.com/ykghke4

    You can also try to change the settings of the firewall at various levels and check if that helps.

    1. Open Windows Firewall click on the Start button and then click Control Panel.
    2. In the search box, type firewall, and then click Windows Firewall.

    For more details on the settings of the firewall, follow the link

    Understanding Windows Firewall settings

    http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Wireless adapter does not Pickup 5 GHz [e4200]

    My dual band 450Mbps TRENDnet TEW-684UB can't find my Linksys E4200 5 Ghz SSID. I changed the SSID of the 5 GHz band and it's broadcasting.

    The router and adapter are 'out of the box' again.

    The adapter can be connect/detect 5 GHz networks fine, however.

    Try another channel.

  • Satellite L350 does not connect to the internet, network adapter yellow exclamation

    Trying to help my Nan with his laptop...
    Model is Satellite L350-170

    Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

    She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

    All the drivers can be downloaded from the Toshiba UE driver page.
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
    Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
    Then, you will get the list of drivers.

    If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

    You asked how to remove the network card?
    Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
    Click the single LED adapter, and then press or click on uninstall button driver

Maybe you are looking for