HP Pavilion dv7-1269us stopped himself turn off reboot screen black

My HP Pavilion dv7-1260us went 'pop' and turns off.

I hit the power button. The LEDs (sound, WiFi, etc.) in line with the power button all came on but the screen stays black and the fan was running.

I turned it off. I turned it on with the same results. I unplugged the AC and the battery. I repeated several times and the results have remained the same.

With the battery and unplugged HQ, I held the button for 30 seconds. Re-installed the battery and AC with the same results. I have also repeated this process several times. I also did this procedure with only battery reinstalled with the same results.

I opened the DVD player and inserted the CD 1 of 2 restore disks. Then I turned on the computer. The fire came what is on the DVD player door then spun it and the light went all the time that the screen was black. I repeated this process with the same results.

I always get a black screen with all led on/autour lit keyboard lights and the fan runs whenever I try to start.

In addition to the led lights is lit, a flashing white light is to the left of the "caps lock" key and a 2nd white flashing in between the "end" and "page up" keys every time.

Any ideas?

Can anyone help?

Best regards, Chiefbem

Hello Chiefbem:

This page will help you understand what the problem is with your computer. These LED lights, you see are beep code to you. By telling you that something is wrong. http://support.HP.com/us-en/document/c01732674 it comes to the page of your computers. Let us know if you need another Assistant. Okay frrw

Tags: Notebooks

Similar Questions

  • Pavilion DV7 1261wm: my laptop turns off suddenly

    OK my old is about four and a half years. I sent in February to get a good cleaning and chekout in the same office, I am using since I bought it because we told hp approved certified and guaranteed mobile phones to send too. In any case... Says that my hard drive was damage to 80% then I did change for a new and I have a lot of opinions of improvements such as the excellent video work and it runs faster so averall I was happy until he his suddenly stopped! I got as maybe he done a refresh and I did not notice then it happens again and again once at different days, but not every day so on until yesterday it stopped 4 times and I noticed he ussually did when there was a programm treatment much and temperatures exceeding 45 degrees.  I have an AMD turion procesor dualx2.

    Original HP hard drive was a x64bits but the new is a 32 bit and has a 2.2 GHz just in case an SMbios 2.4.

    I check the fan. The small place it blows cool air and more to the screen one blows hot air. the sound only wjen I open a program of many processes like autocad or turns on the machine. I notice also before when to stop he did done gently, but now it is a 'plop' sound and is disabled.

    assessment of the system is 4.9

    This sounds like the card system is on its way. I remember these portable line card system video problems and seems like your begins to encounter this problem.

  • The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

    The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

    The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

    Start by:

    Reset the PRAM and NVRAM on your Mac.

    MacIntel: Reset of the controller (SMC) system management

    Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

    If you are unable to start;

    Reinstall El Capitan without erasing the drive

    Please make sure that you back up.

    1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
    2. Select disk utility, then click on the continue button.
    3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
    4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
    5. Quit disk utility and re-enter the Utility Menu.
    6. Select Reinstall OS X and click on the continue button.

    Also, see this tip for user: basic steps for the OS X upgrade.

    If this doesn't get you;

    Install Yosemite or El Capitan, from scratch

    Backup if possible before proceeding.

    Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

    Select utility disc in the Menu Utility, then click the continue button.

    When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

    Click Delete in the main window of disk utility. A panel will fall.

    Define the type of Format Mac OS extended (journaled).

    Click on the apply button, then wait for the done button to activate and click on it.

    Quit disk utility and re-enter the Utility Menu.

    Select reinstall OS X and click on the continue button.

  • Why has my laptop started to randomly stop before turning off

    Original title: computer power questions

    Why has my laptop started to randomly stop before turning off? I had no problem with this computer at all for more than a year. I tried to run all the updates available, but of course, it turned off before she finished. Sometimes it will run fine then others that it is a nightmare. can anyone help please? I would be very happy to help!

    Hello

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way?

    Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
    in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
    air vents. Check that fans are working (before and after opening the case). When your laptop on all the
    You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
    test).

    This sounds like material so if the above does not help you then probably need the help of a
    real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
    Support from the manufacturer.

    ===========================================================

    Check with these utilities to see if information may be collected: BlueScreenView run to see if
    There were some BlueScreens and MyEventViewer at the time, check if the stop (or a little
    seconds before) see the event log contains useful information.

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    ------------------------------

    Also do this so you can see the probable bluescreens. (You may or may not be able to see
    them if they occur even after doing this according to the cause.)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    =========================================

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    =========================================
    =========================================

    More if needed and you think that the closure could related to the Options of food or sleep.

    Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
    type of hibernation - see turn Hibernate on / off

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Venue Pro 8 - button / stop does not turn off the screen

    I just got a coming 8 Pro (32g).  The user manual says that I should be able to press the power button and turn off the screen.  However, when I press the power button, nothing happens.  I can for 4 seconds and the PC will ask to stop, but pressing on this button does not put the tablet in standby or turn off the screen at all.  I have to go to settings-> Power-> sleep just to turn off the screen.

    Yes, I checked the setting of the button / stop under control panel, and it is set to "Sleep" for all cases, battery and plugged in.

    Is there another setting somewhere to turn on the power button to turn off the screen?

    (Oops, deduplication)

  • 2610 suddenly stopped to turn off ink

    Hello

    My 2610 all in one suddenly stopped to turn off ink.  The day before, it was working fine, then when I turned on the next day, he goes through the same motions, but no ink comes out.  I print in black only.

    Thanks for any help

    HI - go ahead and try following the steps described in this document.  It guides you through printing the diagnostic page should help pinpoint the problem.  If you see no black on the diagnostic page, it could be that the cartridge is empty or the nozzles are clogged.  To try to solve the problem with clogged nozzles, try the procedure described in this document.  If this does not resolve the problem, you will probably have to replace the cartridge (this is of course assuming you see no black on the diagnostic page.

    Hope that helps.

  • iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

    iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

    James,

    Double-tap the screen with three fingers and then go to settings > general > accessibility >... put the Zoom wide.

  • Is Camileo S20 - possible to turn off the screen?

    Is it possible to turn off the screen when you use modes Time Lapse or motion detection to save energy?

    Hey Buddy,

    I downloaded the manual to the user off Camileo S20 and searched a little, but unfortunately I can't find any information about turning off the screen when you use Time Lapse or motion detection. It seems that the screen is always enabled.

    But you can connect the AC adapter when recording movies. If you still have the power. :)

  • iPhone 5 - can't turn off / reboot that can not enter password

    iPhone 5 - can't turn off / reboot that can not enter password

    Screen has the 'things to do' info partially down the top of the screen, unable to access the "forehand" (try but does not) to unlock, when press button on / off nothing happens (normally have to enter the access code, but cannot get to it!)

    Any ideas?  I'm leaving tomorrow at 04:00 to travel and NEED this phone.  Have a "Genius Bar" appointment at 05:10 this evening in a busy shopping mall but prefer NOT to have to do!

    A C & P is appropriate here...

    If it has NEVER been jailbroke, here are a few standard repair procedures:

    First of all, try a system reset.  He heals many ailments and it's fast, easy and safe...

    Hold down the power button and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You won't lose any apps, data, music, movies, settings, etc.

    If the Reset does not work, try a restore.  Note that it is nowhere near as fast as a Reset.  It could take well over an hour!  Connect via a cable to the computer that you use for synchronization.  In iTunes, select the iPod/iPhone/iPad, and then select the Summary tab.  Follow the on-screen instructions for restoration and don't forget to say 'yes' to the backup and go back to iTunes on the computer (NOT iCloud) because it is more comprehensive.  You will be notified that all data (apps, music, movies, etc.) will be deleted, but that the restoration is complete, you will be asked if you want the backup content to be copied to the iPod/iPhone/iPad.  Even once, say 'yes'.

    At the end of the basic restore, you will be asked if you want to synchronize the iPad/iPod/iPhone.  As before, say 'yes'.  Note that syncs selection will disappear and the restoration will terminate if you do not respond within a reasonable time.  If this happens, only applications that are part of the IOS will appear on your device.  Corrective is simple – bottom right of iTunes, choose manual 'Sync '.

    If you are unable to do the restore (or it does not help), go into Recovery Mode according to the instructions here.  You will lose all your data (game scores, etc.,) but, for the most part, you can redownload apps and music without being recharged.  In addition, read this.

  • Turn off the screen during the call

    I'm working on an application BB10 requiring to be able to turn off the screen in the same way as holding it close to your face during a call. What can I use to deactivate and reactivate the screen?

    I solved this by adding a container around the outermost container in the hide/show of the container and QML file inside in response to proximity sensors readings.

    I posted a question and answer on Stack Overflow to explain it: turn off the screen during the call

  • Android app can turn off the screen?

    can any Android or app Android worn turn off the screen?

    I tried two Android applications that claim to turn off screen tap on the icon, but nothing happened. I guess that it does not work on BlackBerry.

  • Disable the ability for applications prevent turn off the screen and start screen saver

    Hello

    I need to disable the ability of application full screen to turn off the screen and start screen saver. Basically just need to it:

    When there is no entry in the application that is running in full-screen, I want to turn on the screen saver and turn off the display. As far as I know, the windows default settings is to prevent turning on the screen saver during modes full screen.

    Thanks for the reply

    Hello

    Thanks for posting your query in Microsoft Community.

    According to the description, I understand that you have related questions screen saver settings in Windows.

    A screen saver is a program that, including the screen or filling it with moving images or patterns when the computer is not in use.

    Screensaver programs were designed to help avoid these effects by automatically changing the images on the screen during periods of user inactivity.

    Windows uses photos that better match your monitor for locking screen slide show.

    For more information: See photos on the desktop, start and the lock screen

    I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  • How can I get the projection of "extended battery life turned off my screen?

    How can I get the projection of "extended battery life turned off my screen?

    I enabled first the long battery life when was disconnected, then I disabled it. But now, at the bottom right of my screen is a blue rectangular box that says disabled extended autonomy. and it remains on the screen, in front of all, evn when I go online. Is not only that the taskbar is higher than down right

    found on another forum, worked for me:

    by serene wing

    Annoying, isn't it? Here's how to get rid:

    • Press Ctrl-Shift-Esc to open the Task Manager.
    • Click on the tab labeled 'process '.
    • Find the process named "quickset.exe", right-click on them and select "end process". Confirm the dialog box that appears.
  • When I turn off my screen saver and then change my theme to display then I see my screensaver off icon to dedicated.

    Screen standby turn off problem

    Hi I have Windows 7 and when I turn off my screen saver and then change my display theme I see then my screen saver icon will go offshore for on.  I disable the screensaver again and then change the display theme and once again I see lit again screensaver icon. This computer is a non-Autonomous network computer.

    Hello

    I suggest to create a new user account that the user account can be altered, please follow the steps in method 2 in my previous post to do the same.
    I hope this helps.
  • How can I turn off the screen of welcome in PS CC 2015

    How can I turn off the screen of welcome in PS CC 2015?

    Edit > Preferences > General: check "don't show welcome screen on launch.

Maybe you are looking for

  • Satellite L500-21dts - Stop error code during the installation of Windows 7

    Hello I bought a laptop Satellite L500-21dts of Saudi Arabia. I lost the hd recovery during try windows 7 installation difficulty. If I try to install windows 7, I get the stop error message code 0x0000009c. If I turn sata to AHCI Windows xp sp2, sp3

  • Get the error Code: 0xD2AF8 when you try to update Windows Media Player.

    I tried to upgrade the windows media player 9 to media 11 and received the above error code, this was from the microsoft update page and not another vendor. Can you please help, all I'll be back on the microsoft page will be failed download with the

  • Cookies and Web sites that block you.

    I have a friend who has been blocked from a public site.  He is not a registered user (it is not required) that you are allowed to post anonymously.  I wonder how they're going about blocking him?  In the past, it was a cookie in the Cookie folder an

  • Can not connect to MS money 2004

    Description of the problem: I can not connect using my name and my password now.  I use my hotmail name and password.  I had tried him you forgot your password link and reset the password.  I can log in and use my hotmail and check messages.  But I c

  • What is the preferred method of formatting and partitioning a hard drive?

    Format the hard drive... and build a Partition... (question of part 2) I finally get my CD with Windows 7 and ready to install... I just thought I would ask the "Perferred" formatting the hard drive method...? Quick format in fat files... a quick for