HP Pavilion dv7-4065dx does not start with continuous flashing capslock

Similar Questions

• Pavilion dv7-1201ef does not start

  Pavilion dv7-1201ef

  Windows Vista Home Edition (French)

  Laptop does not start and displays a black screen. No way to access BIOS. Will start after 2 or 3 hours sometimes. Keyboard lights is flashing 1.

  Already tried reinitilization material. (5 times). No results. Clear the BIOS battery disconnected from everything. Once again no results.

  Looks like the motherboard or the CPU is shot.

  Can someone confirm please?

  Thanks in advance.

  PDB - is

  Please count the blink Code

  http://support.HP.com/us-en/document/c01443366

  I think that your card system have a problem

  A replacement cost more than €400

• HP Pavilion dv7-3067nr does not start

  My laptop does not start.  Screen remains blank.  All the lights are on. Numlock and caps lock will Flash twice.  I removed the battery, memory, HD and all the accessories.  same mistake.

  Thank you all for your response.  I solved the problem be to take out the battery for a month and let it sit.

• DV7-4065dx does not start?

  I hope yall can help, or at least point me in the right direction!

  Last night my husband gleefully used his laptop playing farmville or other silly things he does. He left it alone for like 5 minutes to eat a sammich, and when he returned, it was frozen.  He closed down the hard (holding the power button until it is turned off) and now it comes... won't start.

  If you turn it on and do not press any button, he said something to the effect of "cannot start Windows. You want to run the tool (recommended) system restart or start windows normally? »

  If you choose "Start windows normally", windows attempts to load, restarts and the process repeats.  If you choose "startup repair" a bar at the bottom that says "Windows is loading files", and then it crashes on a very pretty blue screen.  Not the BSOD, but a nice pretty blue screen that would be lovely if only the computer bloody actually worked.  The pointer of the mouse is on the screen and I can move the mouse around, but nothing ever happens. I don't know that I can convince my husband that this blue screen is a new farmville feature, so it will not work for me.  Here is a picture of the blue screen of awesomeness: http://img.photobucket.com/albums/v206/BlindInTheMire/IMG_20110830_170410.jpg

  The computer does with no disc in the drive AND recovery disk 1 in the drive. This thing is more rebellious as a teenager in anger. (That's 1 year, which is "teenage" years of computer? It should be)

  Now that we have established that it start normally will not work. I tried to push buttons.  I have tried f11, and it took back me to the screen "windows loading files", leading ultimately to the blue screen of awesomeness, I can't do anything except move the mouse pointer.

  I tried f9 with the recovery disk in this document, said the computer to boot from the cd/dvd drive, and once, it hangs at the BSOA (blue screen of the awesomeness. I don't know if it's the 'technical' term of the screen, but that's what I'm rolling with.)

  Is there a combination of magic button or... something I can do to get this weight of paper $800 working again?  Humor all sides, I hope someone can point me at least in the right direction. My husband REALLY likes his farmville.

  Hello

  Hey well at least who found the problem, the hard drive is faulty and must be replaced.  If your laptop is under warranty, contact HP to have it replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  

  If you are out of warranty and you would like a guide on replacing yourself (it's a simple process), please let me know.

  Kind regards

  DP - K

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• Satellite A200 PSAF3A does not start with 4 GB

  Hello

  I have a model A200 PSAF3A-0QH01N.
  I've been led to believe that it supports 4 GB of RAM but does not start with 4 GB, freezes at the toshiba logo.
  Also have A100 running new 4 GB RAM works very well in this machine. Have updated BIOS did not help.

  Any advice?

  According to THIS specification that your laptop can be upgraded up to 4 GB of RAM.

  Downstairs you can also find the part number of the compatible RAM. List of the memory modules are tested and working with your laptop.

  Where have you bought?

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

• DV7-1232NR does not start

  DV7-1232NR does not start. The lights above the keyboard, the dvd player makes a bit of noise, then eventually the lights Verr Num and caplock do a slow blink continuously. As I understand it, flashing for default codes flashing one to six times, and then exit.

  Hello

  As you have no doubt already concluded, it would look like a significant failure of hardware, in particular given the fact that there was no change when the memory has been removed completely.  Unfortunately, the most likely component is the video chip which really means a new motherboard.

  The only other possibility might be interesting to try is to remove the module WLAN (Page 51), leave the battery and try to start Notepad on the entire sector.

  Kind regards

  DP - K

• HPE-510 t does not start with AMD over-pants W5000 (Windows 8.1)

  I just bought an AMD over-pants W5000 (TDP = 75 W) to replace my nVidia Quadro 600 (= 40 W TDP) in my 2011 HPE-510 t (i7-2600, 12 GB of RAM). Dell U2913WM monitor.

  My machine does not start with the new inserted card. I upgraded a 450 W Antec VP450F 300W stock power, but that has not changed the start situation. I tried DisplayPort and Dual-Link DVI - D.

  Someone at - he was able to get the AMD over-pants working in an office of this generation HP?

  Thank you

  Mike

  Hello

  Open RUN (win + x key) and enter: MSINFO32

  What level of your PC BIOS runs?

  If you can not enter the BIOS at startup so be sure that your keyboard is plugged into a USB 2 port.  Otherwise some time in Windows 8 go to Advanced Options.  See the image below.

  

• Windows does not start with the second internal HDD connected

  Hi all, I recently got around a few major problems with a new buuild, but I found another issue. Windows does not start with my connected storage disk.

  hard drive 500 GB of important data that I can't save on it and need access. It is a hitachi drive, which works fine on other systems but usually works in this one. any suggestions are appreciated, thanks in advance

  fixed the problem of swapping of sata ports and reconnect the cables, thanks for the advice but

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• My pavilion dv7-4051 does not illuminate

  I have a pavilion dv7-4051 and I left ny computer on and it went into sleep mode and now whenever I try to turn it on, but I'm not getting a screen .What can I do

  Hi mzscorpio,

  I understand that it does not start after you perform a hard reset or on battery alone.

  The adapter works?

  You see all the lights are shining. or blink?

  You hear any beeps?

  Have you tried a different outlet?

  Do you get a blank black screen with or without errors?

• Pavilion G6-1b59wm does not start

  Nice day.. I have a G6 Pavilion that does not start when you push the power button. I tried it on battery only and with the power supply cord is plugged in. And yet nothing.

  Here's what I see: when the power supply cord is plugged in, the power supply next to the port light is white. I press the power button it flashes white momentarily (and it flashes F12). Nothing else happens. No other led lite, the screen remains black.

  Diagnosis steps followed:

  1. the battery was removed, and unplugged. Start button / stop for 30 seconds and reconnected. Nothing.

  2. battery removed and plugged into the wall. Start button / down stop and nothing.

  3 tried a different power cord, different battery... nothing

  4 removed boards from the RAM, button / Stop button... nothing

  5 deleted from the hard disk (RAM yet uninstalled), button / Stop button... nothing

  Any other suggestions?

  This should help you locate:

  http://WWW8.HP.com/us/en/store-finder/index.do

• HP Pavilion p6-2054uk: HP Pavilion p6-2054uk does not start all of a sudden upward. Help, please.

  I hope someone can help here?

  I have a desktop HP Pavilion p6-2054uk (Windows 7 64 bit - i5, 3.00 Ghz - 6 GB of RAM) that I bought in 2012 and especially use of HP products.

  By starting my PC the other day, it will not start and crashes on the HP splash screen. When you press ESC, F10 and F1 and F8, it simply changes the screen to a black screen with 7 lines of text giving the details of my PC base on this subject. It should give me other optins at this stage, but does not work.

  The HP Pavilion p6-2054uk hard drive does not start even another hard drive OS I've tried from another computer with Windows 7 64 bit on it. Troubleshooting a few others, I even tried a fresh new hard drive in it with a new copy of Windows 7 64 bit to install into the CD Rom and it will not yet go through the HP start - that is abnormal screen since usually, it detects the Windows CD and install. Furthermore, fans in the PC work normal, as the eject the power of the PC CD ROM light is on too. I tried all the three available inside power cables and tried diferent nine cables sata/data and another monitor entry too, all to nothing done.

  The hard drive that was in the HP Pavilion p6-2054uk when he stopped to start up is fully accessible when placed in the other machine I have. Therefore, it is still operational.

  The notable thing only I did in the days before it were installing Adobe Creative Suite 6 but I do not think that it would cause a major problem like this, noting also that another hard disk OS (without Creative Suite 6 is installed) and a new facility wouldn't start either. Therefore, I am afraid a harware issue any.

  What could be going on here?

  Side for the second or 2 of optimism about the usual boot the PC normally makes noises, it looks like he died immediately after, suspended on the HP screen.

  Thanks in advance.

  R.

  Hi there @dougaljoe,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start and it is indeed suspended at the HP logo even with a different hard disk (with configured operating system) installed. I'm happy to help you with this.

  I suggest that you perform all hardware diagnostics in the BIOS/UEFI. Please also refer to the following, as it covers a range of start-up problems, and if you follow the symptoms you experience should be useful. It includes information on diagnosis.  Computers HP - computer won't start (Windows 7)

  According to you it might just be something easily replaceable, or something more simple to set, or in a worst case something requiring maintenance. If the worst case rears its ugly head, then try a hotline. Please use the following http://www.hp.com/contacthp and create a folder for your question and call HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html If all goes well, he will not come to that, but it is preferable to have the information if necessary.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.