HP pavilion dv7-6101eo: > > light Touchpad does not work

Similar Questions

• Tot on HP Pavilion dv7-1090ed TV tuner does not work after the upgrade to Vista 64 bit Windows 7

  After having upgraded my HP Pavilion dv7-1090ed Vista 32 bit to 64 bit Windows 7 Ultimate, my TV Tuner no longer works. Windows Media Center does not recognize there is that a HP en DVB - T TV tuner is not able to find the digital terrestrial channels-tv, I could look under Vista.

  I searched several for one for the advice and tried to install several recommended drivers but so far without success. Can someone help me with this?

  Hi Charlie54,

  You can try using Recovery Manager to restore the software and drivers (Windows 7) to restore the original drivers, or you can try to install the Windows 7 drivers.

  Here is the Windows 7 drivers for the Software HP MediaSmart Live TV and the TV Tuner driver, they should both be installed.

  I hope this helps, please let me know.

  Thanks and good luck!

• HP Pavilion dv7-4065dx operating system does not work, drive hard main self-test results 303.

  How repairing when HP Pavilion dv7-4065dx will not run the operating system, disk hard main self-test result 303.

  Hello

  303 error seems to indicate that the drive is defective and must be replaced - it is also compatible with the problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Touchpad does not work on my HP Probook s 4525, the yellow light in the left corner is on?

  I have a new HP Probook s 4525 and suddenly, my touchpad does not work as a yellow light in the upper left shows.  Please let me know how I can solve this problem.

  double valve led yellow in the upper left corner of the touch pad. The yellow light is an indicator off status
  This should enable the touchpad.

  Best regards
  ERICO

• Satellite L50-A013 - touchpad does not work

  Hi all

  I've had my L50-A013 Satellite for about 7 months now.

  In the last month or so I started to have problems with the touchpad, freezing and does not not my contact.
  This lasted a few minutes at a time, then came the back of its own accord, almost like a very long latency period.
  This morning, however, I turned on my laptop and the touchpad does not work.

  Device Manager does not display a mouse or pointing device at all until I attach a mouse USB.
  By pressing the key that normally activates / deactivates the touchpad does not work - nothing changes and the light does not turn on in both positions.

  I tried reinstalling the drivers without result, and windows is no update that might help (or any recently that might have caused the problem).

  If anyone has any other ideas for what I can try, it would be amazing.
  The laptop is under warranty so I can hopefully get it fixed, but if possible I would really do not have to go without a computer until it's settled.

  Thank you all for your time,
  -Sase

  Hi Sase

  It is not easy to say what the problem is, but I can imagine that there is hardware problem. Perhaps touchpad loses the connection to the motherboard. I mean if this piece of hardware is not detected I can imagine this scenario.

  Of course best test you can do now is to reinstall OS and test functionality with the factory settings, but will delete your actual configuration of OS and software pre-installed.

  If this kind of test is possible do. If not, I think you must contact the nearest Toshiba service provider and ask for help. They have special diagnostic tools and they can check it for you.

• Satellite A300 - 1GN PASGCE - LED light button does not work with Win 7

  I improve my laptop for windows 7 everything works fine but the touchpad multimedia light led power button does not work.
  Play, stop, next work earlier but not the light / off does not work.

  No idea why?

  Hello

  Maybe it's a question of s a Win 7.
  I mean that the software is not intended for Win 7 but only for Vista.

  But you should check if you can reconfigure this button again.
  In Toshiba Assist-> optimize, you can find the Support of Toshiba Button tool.
  This tool can be used for the new configuration of the control buttons.

  First click on the button that you want to reconfigure and target path you can then choose the path to the exe file that must be executed by pressing this button.

  As far as I know that the exe files are placed in the program files/Toshiba/TSB folder.

  You will find different applications and one of these applications control the light on/off.

• FN + F3 disable the Touchpad does not work. Dell XPS L702X

  Hello, I am new to this forum.

  The function FN + F3 that disable the Touchpad does not work, my laptop Dell XPS 17 (L702X)

  I googled my problem and the only thing I found was this: http://en.community.dell.com/support-forums/laptop/f/3518/t/19454265.aspx

  I think that my problems with the touchpad started when I plugged a mouse into the USB port. It didn't work (it worked well before), and in material-sound-mouse control panel, the system asked me to uninstall a driver or other. I do not remember, but later the mouse worked.

  After this weird thing with the mouse, I noticed that the touchpad was malfunctioning. While I write, the cursor moves without touching the touchpad, it is annoying because it makes me write bad because he is moving in the middle of writing, as I write so it's a mess.

  The second oddity, the Fn + F3 does not disable the touchpad, the orange light come on (the led on the top of the touchpad), but the cursor can be moved in any case, with or without a connected mouse.

  I checked for driver updates, perform an audit of the system, checked for viruses, spywares and I don't know what I could do. I don't know if the problem with the mouse had nothing to do with the function Fn + F3 problem.

  I have not formatted or re installed windows 7, never.

  In Device Manager I have this:

  -mouse and other pointing devices:-Compatible PS/2 mouse

  Help, please. Thank you.

  DOH! Problem between Chair and keyboard...

  C:\dell\drivers\R289237

  Run the executable file of Synaptics.

  Download of extracts only the program on your disk. You must manually install the driver for the Synaptics touchpad with its own executable.

  FN + F3 now disables =)

• Mouse/Touchpad does not work

  I have a hp 2000-bf69wm, 8 64-bit windows.

  The touchpad does not work and is not a mouse cursor. Any suggestions?

  You could try a Hard Reset.

  Forced to Power Reset - "Hard Reset".

  • Perform the Hard Reset .  Start the computer and connect

  Hard Reset is a reset of the driver; This isn't Windows 8 resetting that installs the operating system.  The procedure to hard reset does not erase your files or it destroys your Windows installation somehow.

  Why a power reset works to solve some problems:

  Hard Reset erases the pilot instructions that generally persist to boot-to-boot.  The Hard Reset is a way to force the computer to read the instructions of drivers and software stored in the operating system.  The compensation action and forcing a new reading on the disk and software drivers can solve some problems.

  Sign in and check...

  =====================================================================================

  Find, open, and read the following file named: difficulty TouchPad / ClickPad

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

  I have a Satellite C50D-A0302, PSCGWF part number.
  I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

  How can I get the right drivers for the touchpad?

  How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

  Thank you!

  As you probably know Toshiba does not support Linux and does not offer Linux drivers.
  All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

• Satellite PRO A200-1 s 1 with Windows 7 x 32. Touchpad does not work

  Hello world
  I installed Windows 7 on my Satellite Pro A200-1 s 1, recovered all the drivers on the Toshiba site, everything works fine (less than the webcam that doesn't work even with the previous s.o. XP or Vista...). But my Touchpad does not work... No Fn + F9, no drivers, nothing works. And in my control, Manager of Panel devices seem to be going well.
  Any suggestion?

  Hello

  You reinstall the driver for the touchpad?
  Check it!

  Also check if the option disable touchpad when USB mouse is connected is not checked. That are in the control panel-> mouse-> device settings

• Touchpad does not work after the removal of the Satellite U400-18F

  Hello

  Yesterday I disassembled my Toshiba Satellite U400-18f to clean dust fan, I unplugged all the cables except the cable touchpad I tried to pull up, but nothing happened, so I went back just as it was before.

  My laptop worked fine except the touchpad does not work!
  So please someone know how to unplug this cable so I can fix it...

  http://img841.imageshack.us/img841/4549/removetopcover17.jpg

  Thank you

  There must be some problem with contact. I recommend to unlock touchpad wire, put it back in place and simply lock again.

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards