HP Pavilion dv9548us with Win 7 Home Premium 64-bit. I have HP Cool wInstall sense 2.0

Similar Questions

• Pavilion dv7-1135nr, Win 7 home premium 64-bit OS. I can't correct 2 peripheral problems in Device Manager

  1. ADS Instant HDTV PCI, error code 10, I upgraded vista to win7 recently and reinstalled the drivers of HP technical support web. Are these proposed pilots accurate? I have installed TV tuner.

  HP has drivers for a TV for this model or a USB tuner or tuner Expresscard.

  More that likely that the driver Vista are not compatible with Windows 7 and HP does not offer any for W7.

• H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

  I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

  As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

  I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

  and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

  There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

  Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

  makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

  But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

  Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

  It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

  but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

  HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

  anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

  It's a PCI express 16 x slot card that is 3.0

  Here are the specifications of deetailed according to the guidelines of your page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

  the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

  However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

  so it SHOULD work.

  and performance tests indicate that it FACT it's just stupid... bios that asks the question.

  I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

  HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

  ITS VERY frustrating

  and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

  because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

  and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

  He shoudnt be as much hassle there?

  Thank you.

  Hello

  You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

  You can Windows 8 Enterprise 90 days trial.

  If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• Upgrade to Win 7 Home Premium 32 bit Vista Home Premium 32

  I have a laptop Dell Inspiron 1525 with an Intel Duo T5550 processor.

  It came with Vista Home Premium OEM.  I want to switch to Win 7 Home Premium 32.  I have lost the backup package of all software provided with the PC.  Do I need the original disc against the install Vista upgrade to Windows 7 or recognize the Win 7 install my Vista complete?  I remember way back when I upgraded from Mellenium to XP I had to insert a Windows Installer disk.  Help?

  The Windows 7 upgrade will be superimposed the Vista.

  The upgrade is performed from a Vista running

  Windows 7 questions for:

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• The 16 GB memory how will win 7 Home premium 64-bit use?

  The 16 GB memory how will win 7 Home premium 64-bit use

  Tuesday, August 12, 2014 18:57:45 + 0000, CurtWUC wrote:

  The 16 GB memory how will win 7 Home premium 64-bit use

  As many as it takes. All this, if necessary.

  But keep in mind that, according to the applications you run.
  It can be much less than this. Most people require no so much than that.
  And unless you do a lot of great graphics or video editing, there
  unlikely you want.

  As an example of what I mean, I'm under 64-bit Windows 8
  Professional on a machine of 6 GB right now. With nine major applications
  and a lot of good company of open background programs, it's using only
  about 4 GB at the moment.

• Installation of Win 7 Home Premium 64-bit

  I have a HP Pavilion g7-2069wm Notebook PC. It came with Windows 7 Home Premium 64-bit.  My hard drive fried and everything that came with the computer were the rescue disks.  How can I get the complete installation for this system discs so that I can re - install Windows. I tried to download an iso, but the size is prohibitive, as I have a slow internet connection.  Of course, I could use some help.  Thank you.

  HP Compaq Custom recovery discs
  Contact Technical Support: http://www8.hp.com/us/en/contact-hp/contact.html

  Recover the system after the hard is replaced
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01950054&tmp_task=setupCategory&LC=en&DLC=en&cc=us&lang=en&product=4107708

  J W Stuart: http://www.pagestart.com

• Cisco VPN Client with Windows 7 Home Premium 64-bit

  I recently bought a new laptop with Windows 7 Home Premium 64-bit.   I need to connect to a VPN IPSEC to work.  I tried the current VPN client and after reading the posts in this group, I tried vpnclient-win-msi-5.0.07.0240-k9-BETA.exe.  When I tried to install the beta version, I get the following error message:

  Error 28011: Windows 64-bit is not supported by Cisco Systems VPN Client 5.0.07.0240.

  Any suggestion would be appreciated.

  Hello

  You should download the 64-bit version. vpnclient-winx64-MSI-5.0.07.0240-K9-Beta.exe is the version you tried to install the 32-bit version

  Thank you

  John

• Not able to see the media server on Win 7 Home Premium 64-bit - please help

  I have a smart TV which has DLNA work.  I can see shared media on a mind DIFFERENT PC Win 7 Starter, Win 7 Home Premium 64 bit.  They use the same home network / local, the same router.  It deos not matter if I use Plex or Nero Home 4.

  I checked firewall settings, and they seem to be the same.

  None of the items in this forum seem to help, I'm afraid.

  Help, please.

  I reread your post - Windows STARTER does not include the many associated media
  features, including
   
  DVD playback.
  * Windows Media Center for watching recorded TV or other media.
  * Remote Media Streaming for streaming your music, your videos and recorded TV
  your computer at home.
   
  Do not know if you try to listen to this starter computer
   
  For the Home Premium machine, you should not have Nero or Plex for broadcast.
  The link I provided was to the natives streaming and play. It work
  you? If you are looking for help with Nero or Plex, you should post in their
  respective forums.
   
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• How to activate Win 7 Home Premium SP1 if I have a product key for Win 7 Home Premium without SP1

  I bought the Dell with pre-installed Windows 7 Home Premium computer. I recently had a problem with the firewall system and found that the only solution is to reinstall Windows. I downloaded .iso with Windows 7 Home Premium SP1 because my current version has been already upgraded to SP1. After that I installed it, it asked me to enter the product key. I have provided the product key, but he says it's a bad touch and I realized that my product key must be for Windows 7 Home Premium without SP1.

  I downloaded .iso with Windows 7 Home Premium without SP1, but I can't install it now because it says that my current version is newer than the one I am trying to install. What can I do about it now? Can I get a product key for Win 7 Home Premium SP1 if I have Win 7 Home Premium? Service pack 1 is free anyway...

  If you have downloaded a Windows 7 Home Premium SP1 integrated, you should be able to use the product key located on the COA sticker in the battery compartment.

  Skip entering product key and complete the installation.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• laptop HP pavilion g6, with Windows 7 home basic 64-bit

  In 2012, I bought a pc hp laptop pavilion g6, with Windows 7 home basic 64-bit in Saudi Arabia. I found 2 months that I did after I bought it reinstall drive does not work please help me

  Hello

  Here are a few options.

  1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 you can use the following method to create your own family Windows 7 Edition installation disk basic 64-bit.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC. However, it not there no download directly available for Windows 7 Home Basic Edition, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 64-bit - the source is Digital River).

  Windows 7 Home Premium SP1 64-bit

  For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer.

  http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html

  Once that is done, use an application like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need for your laptop, software and additional pilots are in entering either the complete model number or product of your g6 series no here.

  Best regards

  DP - K

• HP HDX 18 - Win 7 Home Premium (64-bit) CPU is palpable when the charger is removed from the laptop/notebook computer

  I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

  The operating system is Win 7 Home Premium (64-bit).

  Corrections or suggestions would be very appreciated.

  SOLVED

  Go to control panel > hardware and audio > power options > change settings > change advance power settings > managent processor power > political cooling system > set to battery for 'Active' option if it is selected as a liability.

  sas84_HeavyHitR wrote:

  I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

  The operating system is Win 7 Home Premium (64-bit).

  Corrections or suggestions would be very appreciated.

• My laptop came with Windows 7 Home premium 64-bit

  My dell laptop came with Windows 7 Home premium 64-bit, but due to a problem I installed windows 7 ultimate 32 bit, but the dell drivers not support, so installed new Windows 7 Home premium 64-bit Suiloidi the link that I found in this community... but now it's showing the windows copy osf is not authentic... I looked for the key and installed but no use... Please suggest me this problemm...

  Have you used the product key on the COA sticker?

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  You can also use phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Ethernet LAN identified and connected on HP pavilion M6 1002 - tx Win7 home premium 64-bit

  Model: HP pavilion m6 1002-tx

  OS: Windows 7 Home Premium 64-bit

  I bought a HP pavilion m6 1002-tx win7 Home Premium 64 - bit two weeks back. (November 30, 2012)

  I am not able to connect my ethernet lan because the system loses the connection just as I connect to the adapter. Its continually go... like... ID disconnected... identify... disconnected... and so on.

  It is a Realtek PCIe GBE family controller (Version: 7.54.309.2012). I checked the Ethernet driver lan on the hp support site and it is even installed on my system.

  Please help me solve this problem.

  Check if the connection is really good. Other laptops are able to use this ethernet cable? Try to change the speed and duplex to 10/semester, it will be useful.

• Win 7 Home Premium 64-bit, shows that it is valid and active, but still get the error code to activate 0x8004fe21.

  I've owned my XPS Dell for more than 2 years, (that I bought new from Dell) and last week I started to get the ' don't not Genuine Microsoft..., "I'm under Win 7 Home Premium 64-bit, which shows that it is valid and active, but I still get the error of 0x8004fe21 activation code.

  I did all the basics, slui.exe, slui3.exe, slui4.exe, which all say successful activation, but remains constantly get the error of 0x8004fe21 activation code.

  Here are the diagnostic report:

  Diagnostic report (1.9.0027.0)

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 7TK7X - CDPPC-7YHYV
  The Windows Product Key hash: n8Vo57Hev5XM5pGp/e7rfYVx5sQ =
  Windows product ID: 00359-OEM-9805391-45580
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {2EBA2488-7B3E-46A9-9D19-B92E3C47E8F8} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Basic Edition 2003 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {2EBA2488-7B3E-46A9-9D19-B92E3C47E8F8}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7YHYV00359-OEM-9805391-455808S-1-5-21-1800837603-2485805944-2960746992Dell Inc.. Studio XPS 8100 Dell Inc.. A05 20100708000000.000000 + 0004A693407018400FC04090409Time(GMT-05:00) Standard is03DELL FX09 100100Microsoft Office Basic edition 2003114dtxPQcSBdfvAVAMubAVy3TZOgQ =73102-OEM-5695703-736765 9EDDBCB8239FF7A

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00196-053-945580-02-1033-7601.0000-2562012
  Installation ID: 020314789613610665841200172506767716013075146504391195
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 7YHYV
  License status: licensed
  Remaining Windows rearm count: 4
  Trust time: 20/09/2012-09:47:28

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: LAAAAAEAAAABAAEAAQACAAAAAQABAAEAln0eHvbaEqbcJVCZYj0Qeqw6XF0 =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL-FX09
  FACP DELL-FX09
  HPET DELL OEMHPET
  MCFG DELL OEMMCFG
  FX09 DELL SLIC
  OSFR DELL-FX09
  LASRYVITRAGE DELL-FX09
  ASF!   LEGEND I865PASF
  SSDT DpgPmm CpuPm

  Here are the results of the sfc/scannow:

  Microsoft Windows [Uersion 6.1 7601]

  Copyright (c) 2009 Microsoft Corporation. All rights reserved.
  C:\Windows\System32>sfc/scannow
  Start scanning system. This process will take time.
  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log

  I can send the cbs.log log if necessary.

  Thank you

  SoC

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

  Then run another MGADiag report and view the results.

• Nikon NX2 with Win 7 Home Premium software conflict

  I installed Nikon NX2 software on my laptop HP G71-340US, Win 7 Home Premium edition, 64-bit and the program opens, the camera sees the laptop (I can even "go down" to the DMTC map and see the photo on the camera chip but will not automatically fill the transfer software to go from camera to the laptop (I can do it manually).)

  I checked the compatibility of the program (defined on W7). uninstalled, even restore to an earlier point (cannot go back to an earlier date than the original installation).

  I know that this is a conflict with this laptop that I installed the same software on another computer and it works fine.

  Just puzzled as to look elsewhere, short total reinstall I would avoid as much as possible.

  Hoping that someone out there has an idea or a solution.

  Sincerely,

  Bruce

  I installed Nikon NX2 software on my laptop HP G71-340US, Win 7 Home Premium edition, 64-bit and the program opens, the camera sees the laptop (I can even "go down" to the DMTC map and see the photo on the camera chip but will not automatically fill the transfer software to go from camera to the laptop (I can do it manually).)

  I checked the compatibility of the program (defined on W7). uninstalled, even restore to an earlier point (cannot go back to an earlier date than the original installation).

  I know that this is a conflict with this laptop that I installed the same software on another computer and it works fine.

  Just puzzled as to look elsewhere, short total reinstall I would avoid as much as possible.

  Hoping that someone out there has an idea or a solution.

  Sincerely,

  Bruce

  I changed the setting of compatibility for XP SP3 and it works now.