HP pavilion dv9925nr sound does not work help please
Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic
Hello:
Then I recommend that you follow the instructions in the guide to the link I posted above.
After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:
Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )
Pilot modded by silver here
Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
Not to connect, install from a list or specific location,
Select don't search, I will choose the driver to install.
For the hardware Type select 'show all devices '.
Remove control "Show compatible hardware" and click on 'disk '.
Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when he complains, Reboot.
If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.
Paul
Tags: Notebooks
Similar Questions
-
My application get Windows 10 does not work HELP Please
1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:
The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10
2. when I click on view Confirmation it Says:
YOUR UPGRADE IS RESERVED
There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.
and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10
Please help thanks
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
How to create an ISO or USB drive.
Select upgrade this PC now and then click Next
or
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Pavilion dv5020ca sound does not work after upgrade from xp to vista Home premium
HP Pavilion Dv5020ca windows vista Home premium
After the transition from xp to vista will not install the drivers for my sound card and the error message I got was
cannot find media any help would be apperciated
Hello:
See if the works of audio driver XP installation...
Download and run this driver. If it automatically installs audio, very well. If it's not... close any Windows error.
Go to Device Manager and click on the multimedia audio controller needing drivers.
Click the driver tab. Click on set to update driver. Select Browse my computer for driver and at the bottom of this window software option, select Let me pick from a list of drivers for devices on my computer.
Select disc and go to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver will install.
Then restart.
-
Pavilion dv7 sound does not work
The audio on my laptop has stopped working for no apparent reason. I see several posts providing files and instructions, but I want to make sure that I work with exactly the appropriate fix.
Product # A6X08UA #ABA
Windows 7 Home Premium 64-bit Service Pack 1
Pavilion dv7-6c27cl
Thank you very much for your help!
Hello
Try the following.
Download IDT Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59542.exe
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver from the link below.
After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. 'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.
Kind regards
DP - K
-
Video games Harry Potter DVD does not work: help, please?
Recently bought Harry Potter and the order of the Phoenix and Harry Potter and the half-blood DVD games Prince video (new) EA.
Running OS X 10.11.5 on a mid-2010 iMac 27 "i5 quad cord 2.86 Ghz/20 G of RAM (ATI Radeon HD 5750 1024 MB) machine and none will load correctly, or run.
No idea why? Games two spec Mac Intel-chipped...
Ready to get all these ongoing enforcement for my daughter...
Thank you!
Not sure where you bought them, but they're going on 10 years and not likely to run on El Capitan.
-
IDL audio driver on my HP Pavilion Sleekbook laptop problem. Sound does not work
Hi, I have a HP pavilion Sleekbook 14-b029au and my sound does not work. I can't control the speakers of keyboard.
I clicked on the "speaker" icon on my computer and it says that "no audio devices are installed." I went and downloaded an IDL HD Audio CODEC file on the HP site, but when I tried to install it, it failed. Now, when I have the audio troubleshooting it is said that "IDL HD Audio CODEC has a driver problem" and "hardware changes are not detected.
Help!
Hello fm111,.
I would like that you can use the Recovery Manager and restore your drivers and software. Follow the troubleshooting steps and then let me know if it helps to solve your sound problems.
Good luck!
-
The sound on my HP Pavilion G6-1a19wm does not work
Hi the sound on my HP Pavilion G6-1a19wm does not work. His "only" works when you use the audio plug with external speakers. I tried to uninstall the driver, update the driver, microsoft fix - it and troubleshooting steps. audio device present in the Device Manager and supposedly working properly, mute is "not"on." visually everything audio related things suggest that the audio is fine and troubleshooting finds no problem... what else could it be?
Hello
Try the following.
Download IDT Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55036.exe
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you're done, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click the Set Default button - check if you now audio.
Kind regards
DP - K
-
Sound does not work when it is connected to the TV with HDMI
I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance
Hello gematz,
The sound does not work when it is connected to the TV via HDMI.
Go to start.
Type sound.
Click sound
On the playback tab, click with the right button on the HDMI interface, and then select set as default device.
If you do not see the HDMI, right click and select devices see off, then set as default.
I would like to know how everything goes.
-
Sound does not work on my Satellite A200
Hi guys,.
Wondering that if you can offer me any advice, the sound does not work on my laptop. I tried to update the driver, but not luck. I did all the simple things like volume control, basic etc etc settings and I tried to do a system restore, but only restore point is yesterday, (which I think can be another problem, but anyway) it is after the problem began, is not good.
Thanks for your help,
GR
Hello
Can you please tell us what A200 you exactly (A200-xxx)?
What operating system do you use?
Are you using the original recovery Toshiba (Toshiba pre-installed Windows) image?Have you checked the Device Manager? Sound card not shown here?
Open sound please properties > playback devices and do not forget that speakers of the option is enabled.Can you hear anything when you use headphones or headset?
-
Re: Sound does not work on Tecra M10
Hi all
I have a Tecra M10 with XP and all the drivers installed, but sound does not work.
I checked the Device Manager and everything is fine, no red cross or whatever it is on the driver realtek audio.
Everything on the sound properties. I even uninstalled and downloaded the audio driver from the toshiba site again but still no sound and no mistake.
Can someone help out here?Thank you.
Hello!
The sound is turned off on your laptop? With the FN + ESC key combination you can enable/disable it.
Check it!In addition to the high definition audio devices you need two patches from Microsoft to go looking for the proper functioning. Have you installed the two?
Here are the links to the Microsoft Knowledge Base where you can download both:
http://support.Microsoft.com/kb/835221
http://support.Microsoft.com/kb/888111Good bye
-
IdeaPad Y570 sound does not work all the time
My laptop is Y570
The question, the sound does not work
When I start windows I can hear the windows startup melody plays when I start windows media player, video YouTube, VLC player or any other software that requires sound it will not work unless:
I go to sign in-online sound-online right click test Realtek HD Audio, then the sound works.
I tried to fix it by the installed driver and reinstall, I went got the driver from Lenovo and it did not work. My speakers are JBL
Please help me
uninstall both... reboot then install realtek then reboot then install the drivers of onekey theater.
http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS018489
-
The sound does not work on my XP system
Hi the sound does not work on my Windows XP Pro system, while they were inspecting it stipulates that at least one of the following services does not work, Windows Audio and Windows Audio Endpoint Builder. How can I solve this problem?
Thank youHi GeraldSaurin,
· How long have you been faced with this problem?
· You did it last changes before the show?
I suggest you to start the following services and check that it works.
a. click on Start menu and enter service.msc and press enter.
b. in the next window you will see the list of services.
(c) in the list, locate the service and try to Start the services.
Also run the fixit available in the link below and check if it helps.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
I hope this information helps!
-
Original title: audio device problem
just reinstalled windows xp. Sound does not work. Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out. Microsoft Fix it, but the best I get is "do not set as default audio device. The lack of sound recording does show a device. Ideas? BTW, I sometimes get static noises out of the speakers.Hello
I suggest you to follow the steps from the link and check if it helps.
I hope this helps.
-
My sound does not work on my computer... It worked when pluged in my speakers at home... I'm not at home so no speakers and I can not get any sound. I checked mute and is not clicked on also the volume upward all the way. What else can cause the sound works do not? Help is greatly appreciated.
BJ Gawle
Hi B.J.Gawle,
Method 1
Looks like you're using a laptop and this would happen if the default audio device is not set to internal computer speakers.
(a) open the Control Panel.
(b) double click on the sounds and Audio devices icon.
(c) click the Audio tab and under audio playback, select the audio device on the laptop.
(d) click apply and restart the computer, check to see if it helps.
Method 2
If fails it above step then check out the link below and run the Fixit tool available, check if it helps.
Diagnose and automatically repair audio playback problems
-
Sound does not work in Facebook or YouTube but works in Media Player
my sound does not work on youtube or facebook but fact via media player someone has an idea how to solve this pls
Hello
IE - Tools - Multimedia Internet Options - Advanced tab - check sounds in Web pages
APPLY / OK - close and restart IE.If it has been verified - uncheck the box - APPLY / OK - close and restart IE - then go back and re-check.
APPLY / OK - close and restart IE.Solution to Youtube or other Flash video embedded no sound in external websites
http://www.mydigitallife.info/2007/08/16/solution-to-fix-YouTube-or-other-embedded-Flash-video-no-sound-in-external-websites/and, if necessary:
Adobe Flash no sound WaveMapper trick
http://www.mydigitallife.info/2007/08/15/Adobe-Flash-no-sound-WaveMapper-trick/--------------------------------------------------
You need to maybe uninstall and reinstall Adobe Flash
How do I uninstall the plug-in Adobe Flash Player and ActiveX control
http://kb2.Adobe.com/CPS/141/tn_14157.html
Install Adobe Flash Player
http://get.Adobe.com/flashplayer/I hope this helps.
Maybe you are looking for
-
When this http://www.google.com/insidesearch/instant-about.html Google Instant is used, Firefox ask me whether to download a file named search. One blocks download appears for each letter I get.
-
public static int panelHandle cannot be used with the extern keyword in another file
-
A problem has been detected and windows has shut down to prevent damage to your computer. It is the first time you've seen this Stop error screen, restart your computer. If it appears again, follow these steps: Disable or uninstall an anti-virus disk
-
Amount of the transfer use incorrect display Analyzer 7.2
Hello I hope someone can point me in the right direction to fix my problem with 7.2 Analyzer. Seems, after having recently upgraded my Sonicwall NSA2600 to the Firmware, my parser 6.2.6 is reporting absurd levels of the transferred data. Absurd as, n
-
How to create a shared library of Qt and use it on App without a head?
Hi all I'm experimenting with some waterfalls headless basic application development, and I just hit another problem of blocking. I want to create a Qt library with some shared code between the head and user interface elements. That's what I did: cre