HP Pavilion Elite HPE-150uk - do not start

Similar Questions

• HP Pavilion Elite HPE - 580t: could not find driver for integrated Ethernet card for desktop HPE 580t

  This desktop computer has been through a number of operating systems and should now have 10 32-bit Windows (for other software support needs).  All right, except that it lacks drivers for connection to Ethernet (built-in) on board.

  I tried the approach of Windows Update, the "update driver" and search HP, Intel, QLogic and other places of Ethernet NIC and Chipset drivers... nothing fits or works.  The hard drive has long been wiped, so there is no recovery partition, nor do I still support discs. :-(

  Is the reported by Device Manager hardware ID: PCI\VEN_14E4 & DEV_164A & SUBSYS_3070103C & REV_02.  164 a same device does not appear on the pci database. :-(

  Yet once again, I need to Win10 - 32-bit (no 64 - bit).  Thanks in advance for any help that can be given.

  Hello:

  There are no W10 driver for this chip ethernet I can find.

  In fact, everything that I could find were drivers for Windows Server 2003 and 2008.

  HP doesn't even have driver Broadcom ethernet on your PC support page, and I couldn't find the site of Broadcom or the other.

  I explored the Broadcom file and there is no support drivers for the hardware ID you have posted in the file.

  So, the only suggestion I can offer would be to try the driver I compressed upwards and attached below.

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the ethernet controller requiring driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the driver will install.

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO

• HP pavilion elite hpe 500cs: stuck at the start-up screen

  Hello
  I bought gtx 1060 to my hp pavilion elite hpe 500cs pc, but I can't front the start screen (cannot even get into the bios settings). I inherited bios with the latest version 7.15 which is avalible for my motherboard. The card worked on power and different Mr. b. is sufficient. I also have 1 beep, that the long break and followed 3 short and fast beeps long beep.

  Any ideas?

  Your comparison of different systems and not being is not specific about the other tested machine.  It is like comparing a Citroën with a Renault. (Could not stop myself, realizing your in CS).  The HPE 500cs, as you say, is Legacy BIOS.  The new GTX 1060 is UEFI and would not work in the HPE without a hybrid BIOS from the manufacturer of the card.

• My hp pavilion elite hpe-204f video does not work

  My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

  Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

  Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

  Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

  Thank you very much for the research.

  Hello

  The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  If the above is successful, then re - install the map graphic and clear the CMOS.

  Another thing to try:

  A good cable video know.

  A known good monitor.

• USB ports do not respond after boot to Windows 7 - HP Pavilion Elite HPE

  I turned on a HP Pavilion Elite HPE this morning and none of the USB ports work under Windows 7.

  Mouse and USB keyboard work well in the BIOS Setup.  But after Windows starts, it is as if he found neither.

  I tried to start Windows in Safe Mode and last known good Configuration and the behavior is the same, the mouse and keyboard do not work even if they do it in the BIOS.

  I tried a different mouse and keyboard and Windows behavior is the same.

  Now, I would like to have active remote destop. Difficult to solve without an input device.

  I found a solution for Windows 7 x 64 failing to detect any USB device on all ports USB to a HP Pavilion Elite HPE-500f.

  After that backup, read and edit the registry remotely to run the utility of Microsoft Devcon registry run key, Devcon announce an error message 39 for USB hubs.  Enter 'Windows error 39 usb hub' in a search engine led me to the next web page that describes the resolution of the problem. I removed the UpperFilters also well described and restarted key and until then. -See more at: http://www.tricksguide.com/solve-device-manager-error-code-39-on-usb-controller.html

• Pavilion Elite HPE-180 t, windows 7 64 bit started to stop the sleep mode.

  Pavilion Elite HPE-180 t, windows 7 64 bit began to stop in the past few weeks.  It seems to happen from the sleep mode.  I leave the computer for more than 20 minutes, and when I come back, it is turned off.  When I start again, I have an error message and be able to start in safe mode.  I start in normal mode and I get an error "windows has recovered from an unexpected shutdown" without solution.  I also see an action center say error - consider sending additional information about a problem with the ATI display driver (graphics card is ATI Radeon HD5450 1 GB).  When I click for the solution, says that this solution could not be downloaded.  I've updated my drivers.  I haven't added a new hardware or software.

  Thanks HardBeatZ (HP).

  I did as you suggested and I had to uninstall several times because the device picked up previous ATI vs the generic drivers.  In any case it still stop with the blue screen of death when waking from sleep mode.   Then I went back and installed the latest graphics driver from the HP site for my system. I still had a few stops.

  Then I went through all my devices and checked for latest drivers.  All said that the best version is already installed.  Then I noticed that my HP bt500 bluetooth USB 2.0 adapter had only a driver available for windows 7 32 bit (I have installed 64-bit).  I used a keyboard and bluetooth mouse.   So I unplugged the adapter and have resorted to the USB keyboard and mouse and closures of blue screen stopped.  It seems that the network card was originally wake up from its sleep.  I also disabled the reactivation of LAN in the properties of the network adapter device.

• HP Pavilion Elite HPE - 532 s: 'Secure Boot Configuration' not found?

  Hello support, I wanted to disable startup secure for my office.
  I have a pavilion Elite HPE - 532 s Bios 7.15 I followed the step of many posts, but I don't have it under the heading "security"?
  I am on window 10 64-bit UEFI.
  I wanted to disable, because I have a new GTX 960 graphics card and it stuck on the HP logo at startup all the time when I use the new card. !!

  I tried to disable the security slot, but no matter what I do I get a black screen for my card both old and new so I have to reset the bios settings.
  Help me please.

  Thanks for the additional information.

  Here is my diagnosis/notice:

  I don't think you'll be able to get the GTX 960 to work with this system.

  Why it won't work in the UEFI/GPT:

  It will not work in the UEFI [I think] 960 GTX is one card of UEFI and you must disable secure boot to make it work. Your BIOS is only "UEFI compatible" originally planned for Windows 7 [which does not support secure boot]. If you are unable to disable the secure startup, you can not use this card.

  Why it won't work in legacy/MBR:

  It won't work in legacy because it's a single card of UEFI.

  My suggestion:

  Return to the legacy/MBR and use a graphics card that has a dual BIOS BIOS/hybrid or one who supports in particular the Legacy BIOS as described in one of my previous posts.

  Some other things to consider:

  You PSU has enough power for this card? I think it takes a minimum of 400W PSU.

  You connect the auxiliary power connector?

  Have you tried to disable "Intergrated Graphics" in the BIOS [as appropriate]

• Pavilion Elite HPE 450 t PC: desktop computer will not be updated for windows 7 64, Microsoft tried without success.

  I have a PC Pavilion Elite HPE 450 t, and a few months ago he ceased to accept automatic updates from Microsoft downloads.

  I tried to use the tools that Microsoft has nothing helped.

  Some time after, my Norton Security software security suite failed and wouldn't charge.  Norton failed to find a solution.  I guess it must do something with the heavy backlog of unloaded updates.

  ? Is it possible to load windows 10 on win 7?

  I got my PC tested for viruses, root kits and it is clean, but updates are still not loading.

  Honestly, I'd appreciate any help that you folk can provide.  Thanks in advance

  Leon R.

  Hi there @LROSZKOW,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have had problems with the updates of Windows and want to know if you can upgrade to Windows 10. I'm happy to help you with this.

  Reading the questions you have described in your current system that you cannot upgrade to Windows 10, using the normal method of free upgrade. Your system should have the option available from a previous update of Windows, as the free update is delivered via Windows update. If you have a Windows 7 or 8.1 product key, then you could do a clean install of Windows 10 and use this key to activate your Windows 10 free documents. Of course, you want to first make a backup of your data.

  Another option would be to try to load the original image from the desktop computer, and then try to update again by using Windows Update. This assumes you have a working recovery partition or recovery media. Computers HP - performing a recovery of system HP (Windows 7)  But to protect your data, you want to make a first backup as I mentioned.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion Elite HPE-575 has: the graphics card upgrade

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  @W1976, welcome to the forum.

  W1976 wrote:
  

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  No, the GTX 950 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to update the motherboard in the UEFI.  Latest video cards do not for UEFI were the GTX 660/670.  I suggest that you choose a manufacturer and contact their Technical Support to help them choose the best card for your system.

  You will also need to upgrade the power supply (PSU).  It is only 300W.  Most newer cards require at least 400W to work properly.  Although status map specifications at least 300 w, members reported that they had at least to 400W.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Do I have reason to infer that I can't get two monitors running on my HP Pavilion Elite HPE - 410 t?

  I got the Pavilion Elite HPE - 410 t with the included nVidia GeForce 315 graphics card and tried to get two monitors put in place. I have two VGA screens and I run one of them off the coast of DVI using a VGA port to DVI, and it works fine. However, I can not all signals from the built-in VGA port, so I started to look around the site of HP. I came across a page that lists the motherboard Plug and he shouted that the embedded video is not available if a graphics card is installed.

  Thus, it seems that I am out of luck, but I just wanted to see if anyone could tell me if it is maybe something obvious that I'm missing. My nVidia monitors also has an HDMI port, but I understand that I would need a HDMI monitor to be able to use this port.

  Can someone let me know if I'm wrong in my understanding of my options, or if there is an easy solution?

  Thank you.

  Hello

  Yes, you are right to assume that if you have a video card installed, the integrated graphics chip is disabled.  Looking at the specifications of your card (see link below), he suggests that it has a VGA, DVI and HDMI connection.  However, I realize that these specifications vary and may not apply to the card that you have.

  NVIDIA GeForce 315

  If yours doesn't have the VGA adapter, then your also had reason to assume need you a monitor with an entry in order to use 2 monitors HDMI.

  Kind regards

  DP - K

• HP Pavilion Elite HPE-372f: MS-7613 (Iona-GL8E and GTX 970 bios update

  Hi, my system is supplied with the card mother MS-7613 (Iona-GL8E! I'm trying to see if there is an update available to the BIOS before updating my video card for GTX 970.  I already upgraded my power to 600 W for the 970. My current version of BIOS [according to Windows system] is American Megatrends Inc. 6.07 date 19/05/2010. Please help me find where I can get an update of the bios for my motherboard.

  Here is more information on my system:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-300-desktop-PC-series/4162190/model/427545...

  Right now I'm really confused!

  After reading the return of Best Buy Canada policy [which gives me 14 days to return my purchased GPU]. I decided to go against the advice I got from this thread and another HP forum.

  I bought the Zotac GTX 970 at Best Buy, thinking it could be a very small chance that it will work, and if it does not work I have he's coming back!

  To my surprise after installing it, it started no problem! I installed the latest drivers from the website of Zotac and then rebooted the system, but still no problems!

  I ran all the points of reference 3-DMark, more than twice with no problems! [which is about 7 times faster than my ATI hd5770]

  Here are my results: http://www.3dmark.com/3dm/6457066

  I played a few minutes with the deity: sin of origin with ultra graphics to 80 FPS and still no problem!

  I also played a few minutes with supreme commander2 [game 2010 year] at 60 FPS and still no problem!

  I close on my computer about ten times, just to make sure that the system is stable and still no problems!

  Here are two pictures of my information system showing that I run the version of the BIOS HP 6 and the GTX 970!

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 447 & authkey =! HfU-APzSFQeV0Il & v = 3 & ithint = 2cjpg % photo

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 446 & authkey =! AGmYzz92v2tiaNw & v = 3 & ithint = 2cjpg % photo

  I only used it for two days and I hope I won't run into problems in the future!

  So my advice is to check your store for their return policy and try again the GTX 970 yourself! Don't let not the other experiences of volunteers/users HP form this discourage you from trying it!

  PS Don't forget to upgrade your block of POWER 500 W. [I mine improved 460-w 600 W Corsair]

• New graphics card for HP Pavilion Elite HPE-170 t

  Hi, I'm getting artifacts screen sporadically, Ithink my video card is starting to go bad. I want to get a new one, but I do not know what will fit. My computer HP Pavilion Elite HPE-170 t:

  • Intel Core i7 - 860 quad-core processor [2.8 GHz, 1 MB L2 + 8 MB of cache N3 shared]
  • 8 GB DDR3 1333 MHz SDRAM
  • 1 TB hard drive 7200 RPM SATA 3 Gb/s
  • 1 GB ATI Radeon HD 4850 [2 DVI, HDMI and VGA adapters]
  • LightScribe SuperMulti DVD burner
  • Player 15-in-1 memory cards, 1 USB, 1394, audio
  • No TV Tuner
  • Creative Sound Blaster X - Fi Titanium

  I see by a few other questions here several cards video suggested, but these responses were a few years old and these video cards are no longer available.

  So, any suggestions on the new video cards less than $200, which will be more apt to little and works as easily as possible? Thank you!

  OK, I got my new video card, to be exact of it:

  http://www.Amazon.com/XFX-250E-800MHz-graphics-R7250EZNP4/DP/B00JM5XX9O/ref=dp_ob_title_ce

  http://www.xfxforce.com/en-us/products/AMD-Radeon-R7-series/AMD-Radeon-R7-250E-core-Edition-R7-250E-znp4

  It works like a champ! Took me about 5 minutes to install the card physically and 15 minutes to install all drivers and updates.

  So far so good - everything seems OK, so if anyone is looking for a video card for this configuration, it worked for me.

• Help with updates for HP MediaSmart Suite & DVD/BD discs for PC HP Pavilion Elite HPE-112y

  HP Pavilion Elite HPE-112y PC

  VT637AA-ABA

  Genuine Windows 7 Home Premium - 64-bit

  Blu - ray player

  HP MediaSmart Software Suite

  I bought my computer new from Best Buy in 2010.

  HP MediaSmart Version: 3.1.0.1

  HP TouchSmart DVD Version: 4.1.2.5122

  HP TouchSmart Music Version: 4.1.1.4604

  HP MediaSmart Photo Version: 4.1.2.4327

  HP MediaSmart video Version: 4.1.2.4322

  HULU Desktop: Host Version: 0.9.14.1 - SWF Version: 0.9.15.33

  HP MediaSmart/TouchSmart Netflix Version: 1.0.2.0

  I have apalogize, I know that this has been done before, but I'm looking for different software or updates not upgrades.

  A couple of weeks, I tried to watch a movie Blu - ray (made before 2013) through HP MediaSmart DVD, when I put the movie in him would ask if I wanted to check the updates, so I said yes, he started the process of loading and asked again if I wanted to check the updates. Finally, I took the film and went into settings, watched in updates and there was an update. So I chose the update and HP MediaSmart DVD HP TouchSmart DVD changed. After that, the movie played fine.
  
  Now I'm watching a Blu - ray movie (made in 2013) and still once he asks me if I want to check the updates, so I took the film out, went into settings, that update, but there is nothing there. I put the movie back to try again and he asks me if I want to check the updates, so I push No., he would say "disk ready for play. Press Play to start. "So I press start and it will immediately message asking if I want to check the updates. So then the movie is still in I go into the settings, that update, and there is still nothing.

  All DVD for the 2013 game and rain fines. All comics before 2013 play fine. All BDs for 2013 keep asking check updates.

  Now, I find another reason that could not work the BDs is because my DVD/BD players could be updated.

  Device: hp BD O DH4O3S SCSI CdRom Device & hp DVD a DH16AAL SCSI CdRom Device
  Driver provider: Microsoft
  Driver date: 21/06/2006
  Driver version: 6.1.7601.17514
  Digital signer: Microsoft Windows
  
  I clicked on the update for both driver and said that I was aware.

  I find no new updates for HP TouchSmart DVD on CyberLink website. Where can I check updates? In addition, what I have to update all of the HP MediaSmart Software Suite to make it work (and where I do that)? Are there updates for DVD/BD drives and if there is where can I find them?

  Someone, please help me to find the updates.

  Sorry it took so long to get back to that.

  I finally got a new monitor (a long while ago):

  HP Pavilion 22bw IPS monitor 21.5 backlit "

  1920 x 1080

  VGA, DVI - D, HDMI

  So I tried again a movie BD 2013 on the HP MediaSmart/TouchSmart DVD thanks to the new screen and he asked again if I want to check for an update, but it worked fine on PowerDVD from CyberLink 13 (which means I have to buy ). So I have not watched all BD movies on my computer for awhile.

  I recently bought a new computer and restored my old computer to its factory condition and reinstalled all programs and installed the updates I could find.

  After I restored the computer I tried BD 2013 & 2015 on HP MediaSmart/TouchSmart DVD movies and he even asked if I want to check for an update. It's been 2 years and still no new updates! Looks like HP MediaSmart has become obsolete. I don't know if PowerDVD 13 still works because I obviously don't buy it.

  Thus, it seems that if someone wants to play movies BD 2013 or newer that they should ensure that they have the right connection between the monitor and the computer and buy a new BD software to replace the old software obsolete.

  With my new computer, I'll be closing this and boxing upward. So I don't need to worry about this more.

  Thank you for your time and your help. And good luck to anyone else who might have the same problem.

• HP Pavilion Elite HPE-400Y no video output.

  Hello

  I have a HP Pavilion Elite HPE-400Y computer that I had stored (unplugged) in a bedroom closet bedroom for almost a year.  It was working fine when I put it in storage.

  This past weekend, I wanted to use, so I plugged in and connected to an analog VGA monitor well known on the integrated motherboard video VGA analogue connector.  When I turned on, there is no video on the monitor.  I searched the HP support site and found a statement that said "built into the graphics card or the card PCI Express x 16 slot are usable at once; they are not usable at the same time. "This computer came with a 5450 PCI express X 16 video card installed.

  However, the 5450 PCI express X 16 video card only has a digital DVI and I wanted to use a loose analog VGA monitor.  So I powered it turned off and physically removed the 5450 PCI express X 16 video card.  Then I unplugged the power cord and removed the CMOS battery for a few minutes.  Then I replaced the battery and applied again to power.

  I still do not get all analog VGA video out of the motherboard, not even the BIOS messages it is first energized.

  I also tried to integrated edge connector with a DVI equipped, monitor.  Still, there is no video output.

  So I removed the power and re-installed the 5450 PCI express X 16 video card that has only a DVI connector.  I connected to a monitor DVI equipped and applied again to power.  There is still no video output was two well-known instructors.

  When I turn on the computer, the fan power works, processor and fans of casing run, the blue led on the switch is lit and not blinking.  The Green LED on the motherboard is on.  The Green orange and activity led Ethernet link light are on.  There are no beeps.  I can hear the hard drive starts to work.  I have no video output.

  I use a HP USB keyboard and a USB mouse.  The red LED at the bottom of the mouse is not on.  The shift lock and lock lights number do not light when you press the corresponding key.

  This computer has spent more time of storage that it has been used.  It worked even when stored in a bedroom closet in bedroom.  I checked all the wire connections on the motherboard, with no improvement.

  I would like any suggestions to get this working of the computer.  I wonder if the motherboard has somehow that went wrong.

  Thank you for your help.

  Hello Big Dave,

  Thank you for answering my question / problem.

  I am aware that I can not use an analog VGA connection on the motherboard for a digital DVI input on my LCD monitor and vice versa.  I tried two different montors both analog and digital connections on the motherboard.  I tried to communicate clearly, but I guess that I don't have.

  It is unimportant, now that I've found that HP recognizes that my computer model had a drawing or a manufacturing defect that causes the exact symptoms I am having.  There is here a link to HPs extended warranty program that describes the patterns and symptoms:

  http://support.HP.com/us-en/document/c03199423