HP Pavilion Elite HPE-490uk: SDXC card problem

A 64 GB SDXC card is compatible with the card reader in a HP Pavilion Elite HPE-490uk?

Lowemj5, welcome to the forum.

Here are the cards that are supported by the reader:

Figure: view of the memory card reader

Supports the following cards:

Tags: HP Desktops

Similar Questions

  • HP pavilion elite hpe 083uk graphics card

    Hello

    I have a HP Pavilion Elite HPE-083uk with a NVIDIA GeForce GTX260 graphics card (HP part number: HP 579684-001).

    The graphics card has stopped working and I am looking for a replacement, but struggling to find one that matches the required configuration, in the same slot and is available in 2014.

    Any guidance would be appreciated,

    Thank you very much.

    Hello

    Ah - my fault for typing.  Too many 7s.  GV-R726XOX-2GC by Gigabyte  There are a few variants of the same graphics card on this site.

  • HP Pavilion Elite HPE-575 has: the graphics card upgrade

    Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

    @W1976, welcome to the forum.

    W1976 wrote:

    Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

    No, the GTX 950 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to update the motherboard in the UEFI.  Latest video cards do not for UEFI were the GTX 660/670.  I suggest that you choose a manufacturer and contact their Technical Support to help them choose the best card for your system.

    You will also need to upgrade the power supply (PSU).  It is only 300W.  Most newer cards require at least 400W to work properly.  Although status map specifications at least 300 w, members reported that they had at least to 400W.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • HP Pavilion Elite HPE-210f: update video card

    A PNY gtx 950 should physically be in a HP Pavilion Elite HPE-210f? I already know that I have to upgrade the power supply, but before shelling out more money, I figured I would see if anyone knew if the card fits?

    KKingotu, welcome to the forum.

    The problem you will have with the GTX 950 is, it requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on February 5, 2010.  There is no way to update the UEFI BIOS.  You can contact Technical Support PNY to see if they have a VBIOS update for the video card that will work with your motherboard.

    Meanwhile in the space provided, you can measure e/s rear plate on the front of the computer case to see if any of the components.  In addition, it is a wide double card (two locations).

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • HP Pavilion Elite HPE 547c: upgrade graphics card for HP Elite

    I tried to replace/upgrade to update my graphics card for my desktop PC. I tried several video cards, but with each one, once it is installed and the computer turned on, the image does not register with the monitor. Everything else seems to work, but the monitor gives no answer. It was only a problem once the original video card has been removed. The current video card, I am trying to install is the NVIDIA GEFORCE GT 730.

    In the course of the years, I added a memory and the power supply has been upgraded, but all the rest are always original parts (http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/5035344/model/5074426/do...

    Is this a problem with the other parties, who will need to be replaced or is there something else I forget?

    Thank you.

    Hello

    You're dominant, in your case, the most important factor-BIOS compatibility... more recent maps, like the gt730, require the UEFI BIOS to run... you have a LEGACY BIOS system, and cannot do anything, unless you change your motherboard... your pc is a model of early 2011... UEFI standard HP in their systems of end of 2012...

    You can watch other maps, if... the 700 series card youre looking at is a maxwell model 2014... There are in this region that come with a feature of hybrid bios which offers wider compatibility on legacy systems... or you can look at maps more old pascal/fermi architecture that work exclusively on legacy BIOS systems...

    Hope this helps

    This answer solve your message or question?

    If Yes, then share the good news! Inform others that this response was helpful in accepting this solution.
    You can also show your appreciation by giving congratulations.

  • Video card (and others) upgrades for a HP Pavilion Elite HPE-510 t

    Hello... First of all, I just want to say that these forums have been an invaluable resource for me in my quest to upgrade my current PC. A lot of good answers and always at the top of the Google search results, you guys have been so super helpful. Without a doubt a very different experience from what I got when I bought my PC from a company that rhymes with 'hell '.

    I have a few specific questions, however, and thought I'd throw them to let experts weigh... For the record, I have a HP Pavilion Elite HPE - 510 t with all parts except for the video card, which is currently an ATI over-pants v4800. I am running three monitors 20 "(1 DVI and Display Port 2 at present, but who can be flexible). Also, I don't a few moderate games (FPS, MMO) and watch a lot of Netflix...

    1. I'm certainly looking to update my video card, but I do not know what actually fits. I'm ready to upgrade the PSU as well (probably to the Corsair CX-600 recommended elsewhere on this forum), so power should not be a problem. And money is not a huge problem either, as long as the card is less than $500 or more. I've been watching some of the newer cards (like a 680 GTX or even the new 770), but I'm afraid that they will not physically fit in the case, or will be not compatible with the motherboard (which seems to be the PCIe 1.0? Or I read wrong?). So basically, my ultimate question is: what is the best possible graphics card given my case current and potentially put to level power supply, motherboard, I could use? If it's important, SLI is feasible but not more.

    2. I also intend to add additional RAM. The page on the card to my PC to the HP support Site says it takes DDR3 1600 PC3 10600, but everything that I find these days in the RAM is DDR 3 1600 PC3 12800. My mother/PC card will support the 12800 or do I have to keep hunting to find 10600 sticks?

    3. and finally, I'll also put in a Pro 840 Samsung SSD. Do you know if the motherboard compatible with the SATA connectors suitable for speeds of 6 GB? Just plug page says "SATA" and does not specify a version.

    Any help you could give me on these questions would be greatly appreciated. This computer has served me well for a few years now, and I'm hoping to keep it for a few more years. Thanks in advance and have a nice day...

    Aaron

    Here are the specifications of plant origin and configurable options for your desktop HP Pavilion Elite HPE - 510 t CTO and here are the specs of his card mother IPISB-CH (Cleveland). According to the specifications, the motherboard uses the Chipset Intel H67 Express that supports an extension v2.0 x 16 PCIe and 3Gbs SATAII (SATA2).

    (1) SLI is not "feasible", so no need to go there. GeForce GTX 680 cards are going to be long, perhaps too long. You need to measure the space available at the back of the case more further along the x 16 PCIe slot to determine what can be installed. You will need to resign it a notch or two... until you find one that matches. The CX600 Corsair is a great choice and fits, even if you can buy the place CX600M. The CX600M is modular and allows much better management of the cables and so the potential for a better air circulation.

    (2) with regard to memory, the State of the plug;

    Four DIMM DDR3 240-pin connectors
    Supports the PC3 10600 connectors DIMM DDR3 (1333 MHz)
    Memory non - ECC, unbuffered

    Then, two sets of most of these (2 x 4 GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Kits should do the trick. You can also go to the website Crucial.com and use two of their 'guaranteed compatible memory upgrade'.

    (3) your computer supports speeds SATAII (3Gbs) and this is the best it will do. However, the SATA connector is identical to what is found on a SSD SATAIII and it should be compatible with your computer.

    Please send BRAVO

  • New graphics card for HP Pavilion Elite HPE-170 t

    Hi, I'm getting artifacts screen sporadically, Ithink my video card is starting to go bad. I want to get a new one, but I do not know what will fit. My computer HP Pavilion Elite HPE-170 t:

    • Intel Core i7 - 860 quad-core processor [2.8 GHz, 1 MB L2 + 8 MB of cache N3 shared]
    • 8 GB DDR3 1333 MHz SDRAM
    • 1 TB hard drive 7200 RPM SATA 3 Gb/s
    • 1 GB ATI Radeon HD 4850 [2 DVI, HDMI and VGA adapters]
    • LightScribe SuperMulti DVD burner
    • Player 15-in-1 memory cards, 1 USB, 1394, audio
    • No TV Tuner
    • Creative Sound Blaster X - Fi Titanium

    I see by a few other questions here several cards video suggested, but these responses were a few years old and these video cards are no longer available.

    So, any suggestions on the new video cards less than $200, which will be more apt to little and works as easily as possible? Thank you!

    OK, I got my new video card, to be exact of it:

    http://www.Amazon.com/XFX-250E-800MHz-graphics-R7250EZNP4/DP/B00JM5XX9O/ref=dp_ob_title_ce

    http://www.xfxforce.com/en-us/products/AMD-Radeon-R7-series/AMD-Radeon-R7-250E-core-Edition-R7-250E-znp4

    It works like a champ! Took me about 5 minutes to install the card physically and 15 minutes to install all drivers and updates.

    So far so good - everything seems OK, so if anyone is looking for a video card for this configuration, it worked for me.

  • HP Pavilion Elite HPE - 590uk Desktop PC - graphics card

    Hello

    I have a 'HP Pavilion Elite HPE - 590uk Desktop PC' and seeks to update the graphics card - what is the maximum power of the graphics card can I install? The 420 has a request of 50W - would I be able to switch to a 660GTX to 150W?

    Hello

    The HPE-590uk PC has a 460 watt power supply with a 1 connector PCI-E 6-pin power supply. When considering a graphics card, it is always best to consider the recommendation of power supply as indicated by the manufacturer of the graphics card.

    Consult this publication articleand a measure inside your PC.

    There are a lot of different brands and models of the NVIDIA GTX 660.  The reference of the models are rated at 140 watts to several do not require a 450 Watt power supply.  Looking for a model that is 9.5 "or less in length.

    These articles HOWTO HPshould be useful.

    This EVGA NVIDIA GTX 660is on sale for $129 after rebate.  30/11/2014

  • Pavilion Elite HPE-170F recovery problem

    I woke up yesterday to a problem of blue screen on my Windows 7 Pavilion Elite HPE-170F.  Following reboot, but would end up the same way.  Tried to boot mode without failure, but same result.  A technician came to the House and he did Diagnostics with its test disc that says the HD had to be replaced.  I had my recovery disks that I made when I bought the computer 4 years, which made her happy.  He installed the new HD and put the old in another location, planning to transfer my files after the restore.  He began the process of recovery with disk 1 and told me to change the disks as needed while he went to see another client.  All done and then it entered into startup mode of windows. went black for a while and then gave me the message "Windows Setup could not configure Windows to run on hardware.  The technician returned and tried other things but the same results.  We ordered a new series of HP recovery disks but will take a week.  The question, since the instructions say to disconnect everything except the monitor, keyboard, and mouse, would be the printer that is wireless a problem and should it be turned off?  Also, the mouse and the keyboard are different than the original, which would be a problem.  In addition, Windows installed several updates of the day before the problem.

    I venture a guess the your computer uses an Intel chipset, can be set to "RAID", and the replacement of the hard disk is a disk AF (Advanced Format). Please see desktop HP - can not recover the PC after replacing the Hard Drive with an AF Drive (Windows 7 and Vista) for more information on this topic. Please see computers HP-HP System Recovery troubleshooting (Windows 7) for more information on the AF drives and some troubleshooting tips.

    Alternatively, if you can still read the Windows product key of 25 characters on the COA Microsoft attached to your computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Using this method will not install HP customizations or value-added software and you will have to manually install all necessary drivers.

    Windows 7 SP1 can be found HERE and HERE.

     

    Direct link to Windows 7 USB/DVD Download tool.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • TV tuner card - Pavilion Elite HPE-495uk

    Using the Pavilion Elite HPE-495uk, which has the TV tuner MPEG 4 card, I will be able to display TV programs using an 'ordinary' coaxial cable or signal has to be fed through a decoder "TNT"?

    The card supplied with your computer TV tuner is able to receive analog TV signals and digital, you can connect the TV cable directly to the TV tuner card. You can also check this article.

  • Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

    My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

    I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

    Any help will be appreciated.

    Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

  • Better graphics for HP Pavilion Elite HPE-570f card

    I have the Pavilion Elite HPE-570f (BV542AA) Windows 7 ultimate with 16 GB of ram upgraded and an upgrade

    HARD drive with 7200 RPM. The P/S is a 460w and ATI Radeon HD 6770 with only 1Gig vram. I would like to upgrade the video card up without compermizing the P/S.

    Does anyone have any ideas.

    Thanx.

    Hello

    The NVIDIA GTX 550TI would be a nice bump in performance.

    The NVIDIA GTX 550 TI compared to the Radeon 6770.

  • USB 3.0 card desktop Pavilion Elite HPE - 390t CTO?

    Is there a HP (or other) 3.0 card USB compatible with the Pavilion Elite HPE - 390 t CTO desktop PC?

    Thank you.

    Hello

    Your product, it seems that you should have enough space to expand.

    I suggest you find a USB 3.0 PCIe card to any provider of computer frame.  Here are the instructions on installing a PCIe card (you can start with step 2).

  • HP Pavilion Elite HPE-420 old graphics card?

    Hello people, I just ordered the Pavilion Elite HPE-420 with the specs:

    CPU: i7 870 2.93 ghz.

    Graphics card: Nvidia gt230 1.5 GB

    RAM: 6 GB ddr3

    Hard drive: 1.5 to

    OS: windows edition Home premium 64-bit

    Overall, not a bad pc, but "HP" made a huge mistake by using the Gt 230 graphics card since it is a remake of the geforce 9600 gt card? The gt 230 is not really a card you want in your system, these days, I have good or I am completely wrong?

    BTW, I play a lot of games...

    The HP HPE-420nl is here.  Other models of the HPE-420 have an ATI 5450 which is a 2.0 card.

  • HP Pavilion Elite HPE-500f desktop PC

    HP Pavilion Elite HPE-500f desktop PC - I would like to upgrade food, video card and hard drive. Can I use a SATA III hard drive? Can I use a 4 Gig ATI video card? Those are the weak links in this computer in the measurement of performance, Windows 5.1 index. The ram has already been updated to 16G. I would use a hard drive WD Black edition.

    Thank you!

    Jon A. Schoen

    [email protected]

    You can use a SATA-III HDD but the 785G chipset only supports SATA-II. You won't see any difference, and the SATA-III is backward compatible. You have a 300W power supply. You can put in a better and with a minimum 500 or 600 watt PSU, you can install any videocard, pcie 16 x which will be in good physical shape. In retail offices, there is simply not as much space as in a custom build Tower and best video cards these days are huge things two locations. Don't forget, it fits with room to spare, or you will have problems of air circulation.

Maybe you are looking for