HP Pavilion Elite HPE-500f desktop PC

Similar Questions

• HP Pavilion Elite HPE - 500f D: SSD replacement for HP Pavilion Elite HPE-500f to original desktop PC hard drive

  Hi all!

  I would like to replace the original hard drive came with my desktop HP Pavilion Elite HPE-500f with an SSD, but when I tried, I got the error message that my SSD drive was not big enough. The original hard drive is 1.35 TB. What size an SSD should be to replace the original CT 1.35 supplied with my HP so that I could use the 1.35 disc as my second drive and the ssd as my main drive?

  Thank you!

  Hello

  Yes I think a 240 GB SSD would be sufficient.  Using the hard drive for storage is a good idea.

  These articles HOWTO HP should be useful.

  You should be able to install the SSD in the existing hard drive cage as it is put into service for three hard drives.  Use a 2.5 "to 3.5" adapter.  You also need a SATA data cable.

  Don't forget to create the external recovery media and backup your data.

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO

• HP Pavilion Elite HPE - 590uk Desktop PC - graphics card

  Hello

  I have a 'HP Pavilion Elite HPE - 590uk Desktop PC' and seeks to update the graphics card - what is the maximum power of the graphics card can I install? The 420 has a request of 50W - would I be able to switch to a 660GTX to 150W?

  Hello

  The HPE-590uk PC has a 460 watt power supply with a 1 connector PCI-E 6-pin power supply. When considering a graphics card, it is always best to consider the recommendation of power supply as indicated by the manufacturer of the graphics card.

  Consult this publication articleand a measure inside your PC.

  There are a lot of different brands and models of the NVIDIA GTX 660.  The reference of the models are rated at 140 watts to several do not require a 450 Watt power supply.  Looking for a model that is 9.5 "or less in length.

  These articles HOWTO HPshould be useful.

  This EVGA NVIDIA GTX 660is on sale for $129 after rebate.  30/11/2014

• the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

  topic says it all...

  the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

  Hello

  ' HP ' how-to ' article should be useful.

  My e9280t has the same firm and the drive cage holds two drives.

• HP Pavilion Elite HPE-190 desktop PC has

  the two drives went bad replaced but none of the recovery disc what do I do

  whenever I try to install windows 7, he tells me that he does without the raid controller drivers

  Hello:

  See if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Copy the files to a flash usb without all the folders drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers

• HP Pavilion Elite HPE-495uk for: HP Pavilion Elite HPE-495uk

  HP Pavilion Elite HPE-495uk Desktop Hi there I have the computer following and need to update my graphics card and want something with 2 GB what cards will fit in my system and have I not enough power to power a new 2 GB card? Any help would be great. Soon TV

  Hi there @Tele,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have any questions about the upgrade. I'll be happy to help you.

  The Notebooks of PC HP Pavilion Elite HPE-495uk Desktop, this computer has a slot PCI Express 1 x 16 for the graphics card and a 460 W power.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP Pavilion Elite HPE-035sc: msi iona 1.0 ms-7613 can handle a gtx 750ti?

  Hi I have a

  HP Pavilion Elite HPE-035sc desktop PC i7 870 2.9 ghz 8 GB ram

  Serial number: [personal information]
  
  Product number: VS311AA

  BIOS: american megatrends Inc. 5.13, 03/03/2010

  BIOS mode: legacy

  OEM power 460w

  I would like to know if the motherboard can support the gpu or not

  Please answer as soon as possible

  Thank you < 3

  Greetings,

  750ti GTX requires BIOS version 8.xx.

  This card to initialize not due to lack of UEFI support in the BIOS.

  Discover the Nvidia 600 series graphics cards as they will run on a legacy PC BIOS. The 600 series cards can run on a PCIex16 Gen1 slot. I have not checked this.

  I've seen information indicating that some AMD manufacturers ship AMD cards with the ability to switch between legacy and UEFI BIOS.

  Check out it at Sapphire Tech.

  So these four cards do not work when it is combined with adequate food on a legacy BIOS PC with a PCIE x 16 Gen2 slot.

  The PC can have only one slot PCIex16 Gen1. The cards are not compatible in this case.

  You will need to check the prospective: graphics card power and the dimensions of upgrade to check both will fit your turn.  We must also find a graphics card that runs on a slot PCIex16 Gen1.

  See you soon!

• Pavilion Elite HPE (HPE-210y): Travel in RAID 0

  Hi all.

  Recently, I upgraded my hard drive of 1 TB to 2 TB. I bought two hard drives of 2 TB because I planned to run RAID 1, but after that I cloned one of the 2 TB drives and removed the old 1 TB, I decided to save in a different way.   I have most of the things I wanted to back upward again on the old hard drive and another method seemed to be a better route. My uses of son for a little game and RAID 1 seemed to be struggling against productive and not as safe.

  So, I'll be able to move my new drive 2 TB in RAID 0 with my other new 2 TB drive even if I use one right now?

  Else consider this computer Noob?

  Once more, I find myself at the mercy of the much more educated HP Forum members lol.

  Here are my computer specs:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-200-desktop-PC-series/4160010/model/416001...

  Hard drive is the same, but upgraded to 2 TB

  Pavilion Elite HPE (HPE-210y), AMD Phenom II x 4 3.0 GHz, 4 X 2 8 GB RAM, GeForce graphics 970, win 10

  Hello

  HP's instructions for configuring RAID using the AMD RAIDXpert. Read at least twice.

  Check your BIOS settings and make sure that the SATA is set to RAID.

  I suggest you connect hard drives to ports SATA 1 and 2 (blue and white). Among the old HP AMD motherboards we're picky about which ports SATA would be supported RAID.

  

  BTW - RAID 1 is much more secure that it will provide redundancy in the event of a hard drive failure and RAID 0 won't.

• HP Pavilion Elite HPE-372f: MS-7613 (Iona-GL8E and GTX 970 bios update

  Hi, my system is supplied with the card mother MS-7613 (Iona-GL8E! I'm trying to see if there is an update available to the BIOS before updating my video card for GTX 970.  I already upgraded my power to 600 W for the 970. My current version of BIOS [according to Windows system] is American Megatrends Inc. 6.07 date 19/05/2010. Please help me find where I can get an update of the bios for my motherboard.

  Here is more information on my system:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-300-desktop-PC-series/4162190/model/427545...

  Right now I'm really confused!

  After reading the return of Best Buy Canada policy [which gives me 14 days to return my purchased GPU]. I decided to go against the advice I got from this thread and another HP forum.

  I bought the Zotac GTX 970 at Best Buy, thinking it could be a very small chance that it will work, and if it does not work I have he's coming back!

  To my surprise after installing it, it started no problem! I installed the latest drivers from the website of Zotac and then rebooted the system, but still no problems!

  I ran all the points of reference 3-DMark, more than twice with no problems! [which is about 7 times faster than my ATI hd5770]

  Here are my results: http://www.3dmark.com/3dm/6457066

  I played a few minutes with the deity: sin of origin with ultra graphics to 80 FPS and still no problem!

  I also played a few minutes with supreme commander2 [game 2010 year] at 60 FPS and still no problem!

  I close on my computer about ten times, just to make sure that the system is stable and still no problems!

  Here are two pictures of my information system showing that I run the version of the BIOS HP 6 and the GTX 970!

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 447 & authkey =! HfU-APzSFQeV0Il & v = 3 & ithint = 2cjpg % photo

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 446 & authkey =! AGmYzz92v2tiaNw & v = 3 & ithint = 2cjpg % photo

  I only used it for two days and I hope I won't run into problems in the future!

  So my advice is to check your store for their return policy and try again the GTX 970 yourself! Don't let not the other experiences of volunteers/users HP form this discourage you from trying it!

  PS Don't forget to upgrade your block of POWER 500 W. [I mine improved 460-w 600 W Corsair]

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• HP Pavilion Elite HPE-270e cannot update the bios

  HP Pavilion Elite HPE-270e desktop PC

  Microsoft Windows 7 (64-bit)

  I have a problem running the sp49903.exe that contains the last update of the bios for my pc. My antivirus is disabled, no other programs are running, I am logged in as administrator and also tried to run as administrator, but that I always meet the same problem. It runs and I click Next and then I agree with the terms of the license agreement and then click Next and then I get an error message: (the contents of this file cannot be unpacked. The executable file that you are trying to run has been damaged. If please get another copy of the file, verify its integrity and try again.)

  My latest version of bios is 5.28 and I'm trying to update to 5.29.

  HP Pavilion Elite HPE - 270e Desktop PC product specifications

  Software downloads & Driver - HP Pavilion Elite HPE-270e desktop PC

  you try to download a new copy of it?

  I did and it worked.

  try to download and try to install on another PC and see if the error is the same. It will not install on another PC, it checks to see what the BIOS is the first. But the error you report no has nothing to do with the BIOS, it tells me the downloaded file is corrupt and since I just tried to download and install and it worked, it tells me the file on the server is good.

  Good luck

  Bill

• USB ports do not respond after boot to Windows 7 - HP Pavilion Elite HPE

  I turned on a HP Pavilion Elite HPE this morning and none of the USB ports work under Windows 7.

  Mouse and USB keyboard work well in the BIOS Setup.  But after Windows starts, it is as if he found neither.

  I tried to start Windows in Safe Mode and last known good Configuration and the behavior is the same, the mouse and keyboard do not work even if they do it in the BIOS.

  I tried a different mouse and keyboard and Windows behavior is the same.

  Now, I would like to have active remote destop. Difficult to solve without an input device.

  I found a solution for Windows 7 x 64 failing to detect any USB device on all ports USB to a HP Pavilion Elite HPE-500f.

  After that backup, read and edit the registry remotely to run the utility of Microsoft Devcon registry run key, Devcon announce an error message 39 for USB hubs.  Enter 'Windows error 39 usb hub' in a search engine led me to the next web page that describes the resolution of the problem. I removed the UpperFilters also well described and restarted key and until then. -See more at: http://www.tricksguide.com/solve-device-manager-error-code-39-on-usb-controller.html

• Pavilion Elite HPE 450 t PC: desktop computer will not be updated for windows 7 64, Microsoft tried without success.

  I have a PC Pavilion Elite HPE 450 t, and a few months ago he ceased to accept automatic updates from Microsoft downloads.

  I tried to use the tools that Microsoft has nothing helped.

  Some time after, my Norton Security software security suite failed and wouldn't charge.  Norton failed to find a solution.  I guess it must do something with the heavy backlog of unloaded updates.

  ? Is it possible to load windows 10 on win 7?

  I got my PC tested for viruses, root kits and it is clean, but updates are still not loading.

  Honestly, I'd appreciate any help that you folk can provide.  Thanks in advance

  Leon R.

  Hi there @LROSZKOW,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have had problems with the updates of Windows and want to know if you can upgrade to Windows 10. I'm happy to help you with this.

  Reading the questions you have described in your current system that you cannot upgrade to Windows 10, using the normal method of free upgrade. Your system should have the option available from a previous update of Windows, as the free update is delivered via Windows update. If you have a Windows 7 or 8.1 product key, then you could do a clean install of Windows 10 and use this key to activate your Windows 10 free documents. Of course, you want to first make a backup of your data.

  Another option would be to try to load the original image from the desktop computer, and then try to update again by using Windows Update. This assumes you have a working recovery partition or recovery media. Computers HP - performing a recovery of system HP (Windows 7)  But to protect your data, you want to make a first backup as I mentioned.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.