HP Pavilion Elite M9080N Nvidia 8800GTS WIN7 64-bit display problem

Help! I have a HP pavilion elite m9080n with a video card from nvidia 8800GTS installed. Recently, I noticed that when you browse Web pages parts of the page will not render properly (I have attached a screenshot in which I circled the problematic area). It's like the area is transparent and colors are not properly or to its full opacity. I have swapped with a different video card to see if that would fix the problem but it's the same thing with the current map and the replacement of the card. I also tested to see if it is the monitor using 3 different screens and it's the same result. I'm trying to understand what could be the problem. I advanced and ordered a motherboard thinking it could be something to do with the motherboard. Need help please, any suggestions or advice would be greatly appreciated.

Hello

Can you explain your other post regarding this post?

Try a few different video cables and do not use adapters.

Tags: HP Desktops

Similar Questions

  • Pavilion 14-v052tx: need Driver for camera and graphics from Nvidia for Win7 64 bit of score Alps

    I bought this new laptop, HP Pavilion 14-v052tx, recently. I am running Windows 8.1 64 bit on this device. I want to downgrade to Windows 7 64-bit. It comes with 2 GB Nvidia GeForce 830 M dedicated GPU and Alps Touchpad. When I go to the device driver download page I don't see any driver listed for the two components to Windows 7 64 bit. For the touchpad, there only Synaptics Touchpad driver that does not work during installation. How can I get Alps will show Device driver and graphics driver Nvidia for Windows 7 64 bit?

    So I should get the graphics drivers from Nvidia instead. Alright. But on the driver for the Synaptics touchpad touchpad driver does not install even. I mean the Setup program runs and finishesh very quickly. No option is added to the properties of mouse, nothing is added to add/remove program list, no icon in the taskbar - apparently no signs of the installed driver. Not to mention that I have Windows 8.1 for the touchpad Alps pointing device (ACPI\AUI1714\4 device instance path & 39CCCB47 & 0). Why would it have Alps driver for Windows 8.1 and Synaptics for Windows 7?

    Edit: I just went in the file Release.txt shipped with Windows 8.1 Alps touchpad driver and discovered that it supports Windows 7 64-bit too. I guess I'll just install this driver.

  • Pavilion Elite HPE150f desktop: windows 7 64 bit desktop

    someone can answer my question please, when I first bought this desktop computer in April 2010 labeling software Lightscribe disc was pre installed, Lightscribe start-up, Direct disc Labeling, Lightscribe Public SDK, Lightscribe Control Panel, utility window diagnostic of Lightscribe, lightscribe labeler of simple drive Lightscribe Lightscribe demo site, I could click on any one of these and they would take me to the site where I could download the updates and new drive models labelling, I used them several times during my own films.

    Now when I click on the links I get a 404 message, it is still on my laptop husband who bought at the same time and it can burn its records with the models.

    I downloaded the trial version of Audio Labeler, but they want me to pay for the models, I always have my username and password for Lightscribe but can't find it anywhere.

    I contacted Labeler Audio on the forum here and they say that HP holds the license for Lightscribe for life, but they have no record of my user name and password, at the end of 14 days, I'll have to no longer use of the Audio unless labeling software I buy it. How can I get my own Lightscribe return? If anyone can help, I'd appreciate it.

    Hi there @emma22

    I understand that you are looking for assistance with the Lightscribe software. I'm happy to help you.

    Try this site, they have the latest version that created HP and other tools.

    LightScribe System Software - lightscribesoftware.org

    Let me know if it works for you.

  • How to fix error code 80073712 Ms? Pavilion Elite HPE 440f Win 7 64 bit

    I could not successfully download Service Pack 1 for Windows 7. It still doesn't after that performing recommended patches, including downloading updated installation.  MS recommend now reinstall Win 7, but my computer did not come with all disks to do.

    Other updates continue to download and install normally

    Can anyone help?  In all other respects computer works very well.

    Thanks Rod

    Rod wrote...

    Hi Frank,.

    Thank you very much once again it is really useful.  All the steps went well until the SP upgrade installation when the program checks the compatibility. He came back with a message saying that the following programs would probably not work properly after installation, and to recommend I uninstall and reinstall it after the upgrade.

    * ATI Catalyst Install Manager

    * ATI Catalyst Control Manager

    I can only find the Installation Manager.  However I don't see how I could do this, because I don't have an ATI drive and, as I presume that they are related to the graphics card, I'm very nervous about their uninstall anyway.  Wouldn't it turn off my video display?

    Thank you sorry that it is fast becoming a such saga

    Rod,

    Uninstall the software and the ATI drivers related to your graphics card will reduce that temporarily the adapter to a 'standard VGA' with a low/moderate resolution. After that Windows 7 has completely re-installed, you can install the latest graphics driver from ATI. This will restore all the features of the graphics card. You can also install the latest drivers for all devices on your computer as well.

    Frank

  • Qosmio F50-12 b Win7 64 bit driver problems affects Fn, Power Saver, Tablet

    Hello

    I have Toshiba Qosmio F50 - 12 b. initially, I have Vista Ultimate 32 bit, then I refresh installation of Windows 7 Ultimate 64-bit...
    This is the problem,

    I installed all the drivers for my operating system and the computer, but I can not installed or activated FN key, TouchPad, PowerSaver of Toshiba and the keys palpable above the keys of Func/digital as Dolbly, Media Center, Forward, Backward, Mute-, lights-touchpad on - off utility.

    ? also tried vista 64 drivers for these things, but nothing works to them.
    I tried auto updater Toshiba win 7driver tool (tsi4win7.exe), but nothing changes.
    I need help on this situation... Is anyone know how active these utilities, in particular the FN keys and touchpad!

    Thank you...

    I hope that the Toshiba support my voice up and help this time :)

    Hi mate

    The 64-bit value Wi7 package and Support of Flash memory card utility must be installed.
    Flash Card Support utility controls the FN keys and you should install it, after installation of VAP.

    Also the media control buttons should work after the installation of the package value.

  • 15 - n015et Pavilion Win7 64 bit driver

    15 - n015et Pavilion Win7 64 bit driver problem?

    I can't find the driver please help?

    Hello:

    HP only provides support and drivers for Windows 8 on its new consumer notebooks.

    If you want to install windows 7 on your model, then you need to find the drivers from all over the place.

    Before installing W7, first make your recovery media set by reading the info on the link below.

    http://support.HP.com/us-en/document/c03481733

    You can use most of the drivers of this model, except the audio and graphics.

    DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4058%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    For the graphics, you need a two-step approach.

    1. download and install the Intel Graphics driver from the link below.  The first file listed.  Then restart.

    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3719&DwnldID=23405&ProductFamily=Graphics&ProductLine=Desktop+graphics+drivers&ProductProduct=4th+Generation+Intel%c2%ae+Core%e2%84%a2+Processors+with+Intel%c2%ae+HD+Graphics+4400&DownloadType=Drivers&lang=eng

    Then, install the Nvidia graphics driver from the link below.

    http://www.nvidia.com/download/driverResults.aspx/70187/en-us

    Audio.

    Accept the agreement, download and install the file second on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  • How to get the thumbnail pictures to show? I m using hp pavilion elite hpe with windows 7...

    My computer is a HP Pavilion Elite HPE. Windows 7 64-bit operating system. 16 GB OF RAM.

    My computer is unable to display thumbnail images of the photo files. If I want to see which image is behind the icon that I have to use another program to open and view the file photo... As I remember it was the problem from the beginning...

    All photo as PS and other programs show thumbnails in their browsers.

    Hello

    Here's something to check.

    Open windows control panel, open Folder Options, click the view tab and Remove the check mark next to "always show icons, never thumbnails".  Click on apply to save this change.

    Kind regards

    DP - K

  • HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

    Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

    I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

    At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

    Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

    Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

    When did you purchase your product? : December2010
    Product HP Pavilion Elite HPE - 480t CTO desktop PC
    Select a problem area: other
    What is your serial number (SN): [personal information deleted]
    What is your operating system? : Microsoft Windows 7 Home Premium 64
    Your computer is unable to work with Accessories products? Please select all the boxes. other
    What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
    The CD/DVD writer burner was built in the computer when you bought it? NO.
    You hear the sound from the speakers connected?
    The display on the product seems to work correctly? Yes
    Have you connected the product to your TV, DVD player or a music system? NO.

    If there is an error message, please specify: cannot read media
    Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
    Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
    Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
    How would you describe your level of technical skill? : intermediate
    First name Peter
    Name, first name rider
    [Personal information]

    Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

  • What is the voltage of the module memory for desktop Pavilion 6000 series? (Win7 64-bit;) Alvorix MBoard)

    No info on all help screens

    Prof. Banhein: I know layout of speed etc. Crucial site gives two choices for mem modules: 1.35 or 1.5 volts. This is the crux of the problem.

    Thanks for the quick response, running 6000 series pavilion (p6703w) w/Alvorix, motherboard, Win7 64 bit. More help please!

  • Win7 64 bit and computer Pavilion Elite

    I have a Pavilion Elite 9753uk with a NVIDIA Geforce GT220 graphics card that willl not work with win7 64 bit, latest drivers are suitable, but it needs a graphical BIOS update which does not always have to be made available, Nvidia forums full of unhappy people!

    He will have to buy a new card, not in the game, but would need a duel monitor setup, suggestions please for a card that won't break the Bank, works with Windows 7 and 64-bit.

    Thank you for your sensible suggestions.

    After a verey frustrating weekend of research into the problem, I find that there is no solution to the incompatibility of the HP Pavilion / 220 Nvidio (N11071) and 64-bit win.

    Not wanting to spend money on a new map to see the same error occurs, I'll now wait for win7 SP1 (ormaybe even 2) in the hope that a workaround is provided.

    Thanks for your help

    Derek

  • a pavilion elite h8-1040 are home to a nvidia gtx 580 or 590? power and heat are my concern. THX

    A pavilion elite h8-1040 are home to a nvidia gtx 580 or 590? power and heat are my concern. THX

    Hello

    Some models of HP PC are configurable with a NVIDIA GTX 580 requiring optional power of 600 watts.

  • Replacing a graphics card from NVIDIA GeForce 9800 GT for a HP PAVILION ELITE

    I'm looking for a replacement for a graphics card from NVIDIA GeForce 9800 GT for a HP PAVILION ELITE M9361. UK - A DESKTOP PC (EMEA) which has a number of product KZ758AAR.

    The PC is not used for games, but for the treatment of the graphic image.

    I believe that a

    PNY GTX 550 TI PCIe 2.0 Graphics Card - 1 GB

    can be a suitable replacement.

    Can you please advise.

    Excellent choice. The card fits, and your power supply meets the minimum required.

    Fortunately, the PNY graphics card comes with the power cable PCIE 2 you will need.

  • A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

    I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

    Hello

    Based on the following specifications, it has a few free PCIe connectors:

    http://support.HP.com/us-en/document/c01792852

    You can add a card PCIe USB 3.0 on your computer such as:

    http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

    Kind regards.

  • XP drivers for HP Pavilion Elite m9280.me desktop PC

    Hi, I'm looking drivers XP (downgrade) to HP Pavilion Elite m9280.me desktop PC.

    I can't find them on HP Web site, there is only the lightscribe software.

    Can someone write me a list of the devices (e.g. video: GeForce GT 130) or the site where I can the found? Thank you very much!!! Tangier

    Drivers for Windows XP:

    Intel G33 chipset (first installation and reboot) here

    Intel Matrix Storage Manager here

    Realtek HD Audio here (install it before graphics driver)

    Graphic Nvidia GT 130

    Use modded worm 185.85 Nvidia drivers.

    How to install under XP:

    Basically, it is a 3 step process:
    1. Download driver here, double click and select Extract.
    2. download modded INF here and replace the original INF in extracted folder.
    3 install and reboot.

    LAN Realtek RTL8111C here

    Lite - on Wireless LAN here

    .NET framework 1.1 (Install before HP multimedia keyboard)

    HP multimedia keyboard here

  • HP pavilion elite m9350f: I forgot my bios password on my hp pavilion elite m9350f

    Error loading operating system. When I try f10 im done typing a password (I forgot witch) f1, 2, 8, 11 and 12 do nothing... pressing esc takes me to the boot menu hard drive, give NVIDIA boot agent error says cable unplugged

    Hello:

    Please see the link below the last section to find out how to clear the BIOS password.

    http://support.HP.com/us-en/product/HP-Pavilion-elite-m9300-desktop-PC-series/3733093/model/3747343/document/c01421635/

Maybe you are looking for

  • How can I reinstall iPhoto for Cougar?

    When I run the iPhoto application, it "quits unexpectedly."  I want to reinstall it.  When I go to the App Store, I can't find a way to do it?

  • The RAZR and Droid 4 are Global, but...

    http://www.androidcentral.com/Verizon-confirms-some-phones-will-get-updated-global-use As we have long suspected, and others have often refused, these phones will finally be capable (GSM) worldwide. The real question, when?

  • Unable to see the second page on the navigation

    Hello I have created two pages. The button, click on I m navigating to another page. Another page with following components: 1. background image 2. the title bar image 3. text title bar. 4. the icon on the title bar image 4. scroll the display with l

  • Create table based on the timestamp prtition generate ORA-14752

    HelloI have following question - why create table 1 generate ORA-14752 script? Script 2 works without any problem. Feel it is on interval - day/month. How to create the script table 1?Database:Oracle Database 11 g Enterprise Edition Release 11.2.0.1.

  • Cancellation and uninstalling

    I need to cancel all my plans. Do I need to uninstall all of the programs to do? If yes how uninstalls creative cloud and applications already installed?