HP pavilion followed bsod to black screen and the start program menu f10 does not work

Similar Questions

• Dreamweaver CS6 how can I automatically indent the code? I've already put the presets and the codeview options, but it does not work.

  Dreamweaver CS6 how can I automatically indent the code? I've already put the presets and the codeview options, but it does not work. Thanks for advice

  Commands > apply Source format.

  I use it so often, I created a shortcut to it.

  Nancy O.

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• After upgrading to bold9900 blackBerry smartphones and the last appworld - myworld icon does not work - cannot download applications

  Hello anyone out there. ?

  I'm looking for technical help, on this forum, I have

  having read the many problems however few answers...

  I can connect to 'my world' only on the bb site and see my account, but since I had the

  new bold9900, in the new appworld, the myworld "icon" after clicking, the Green wheel turns

  to always say "Please wait..."  I did everything the Office tech rogers said, re - install appworld,

  Take out the battery, switch radio 2G, then try to reinstall the appworld.  Seems to be a clitch software!

  The only apps I have are the apps that I got from my old phone, which transferred the BB

  Desktop software.

  Help!

  The 9900 is only "rst", not "34(".) ".

  Article ID: KB24714 How to clear the cache of BlackBerry App World

• the spell checker button is dimmed and the fate that you write does not work either. I'll have to use microsoft word, then copy / paste.

  See the question

  Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• iPhone 6 alternating between the black screen and the Apple logo and nothing else

  my iPhone 6 alternates between a black screen and the Apple logo, what do I do?

  Hi Nathanielfromwa,

  If your iPhone 6 alternates between black screens and the Apple logo, this could be a problem that can be fixed by wiping your iPhone to factory settings. If this is the case, save your iPhone first. I've included links if you need help with backing up your iPhone, but also to reset to the factory settings.

  How to back up your device using iCloud or iTunes - Apple Support

  Erase content and settings on your iPhone, iPad, iPod touch or Apple Watch - Apple Support

  I hope this helps, and if you have more questions, do not hesitate to ask!

• My computer sometimes suddenly restart after disk defragmentation and applied restore.it system still does not work. Can someone help me? : ()

  I need help on my computer, it's a window Vista Home Basic. Sometimes my computer rebooted or encountered problem blue screen. Is it related to my anti virus program or any hardware or software failure? I try to solve it, Defrag disk and system restore, but it still does not work.

  Do you have an antivirus installed? Otherwise download, update and scan with this

  http://www.Microsoft.com/security_essentials/

  Follow these steps

  http://support.Microsoft.com/kb/929135

  and this

  1. Open an elevated command prompt. To do this, click Start, click principally made programs,Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833
  http://www.howtogeek.com/HOWTO/Windows-Vista/verify-the-integrity-of-Windows-Vista-system-files/

• My office and the (quick launch) taskbar shortcuts do not work.

  Here is my problem
   
  My office and the (quick launch) taskbar shortcuts do not work.
   
  the paths of the target go program, but when I click on them
  they jump to the top of the "open with" box, select the application to open the file with.
  I went into the actual program .exe files, and they work very well, also if I chose the file .exe 'open with '.
   
  I have two user accounts on the computer, and this problem only occurs on one of them.
   
   
  If I right click on the IE icon and click on 'Properties' (internet) are said (in this popup box)
   
  [X] Control Panel
  'c:/windows/system32/rundll32.exe '.
  Application not found
   
  I went in this folder and that the file is there.
   
  have ran McAfee, so, nothing found.
   
  That is what it is?
   
  Thank you
  Steve M.
   
  fast response helps to:
  E-mail address is removed from the privacy *.
   
  BTW, my PC is a Dell Optiplex GX260
  without other problems (I see)

  Looks like your Windows file associations have to dispose. This means that XP doesn't know what to do with files by looking at the file extension (.exe for executables)., .doc for MS documents, etc.

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  Run the following scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

  Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

  I found this in another thread that you created [*]:

  I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

  I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

• HP5610 All in One Printer and for some reason any fax does not work

  * - Original title - the printer does not properly

  I have a HP5610 All in One Printer and for some reason any fax does not work.  What could be the problem?  I don't have the CD installation disc.

  Hello

  To provide a proper resolution, I would need more information on your side.

  1. what operating system is installed?

  2. don't you make changes to the computer before this problem?

  We can refer to this article and check if that helps.

  Unable to send or receive Fax: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01670485

  You can also ask your question in the Forums of HP Support (scanning, fax and copy): http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/bd-p/Scan

  Thank you.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help, please. Screen touch dell inspiron 5559 HID-complaint does not work.

  Screen touch dell inspiron 5559 HID-complaint does not work. I have to keep this option disabled because all of a sudden he starts to feel the uncontrollable different key. Sometimes it works fine for a day, but it continues to be. I have restored the laptop to factory settings, but it did not work.  I checked the updates of drivers, but they are none.  Please help me with this. Thank you in advance.

  

  How do I calibrate my touch screen

  www.dell.com/.../EN