HP Pavilion g series: problem with correction of the graphics card Administration says computer not connected, but it is

Similar Questions

• R15 reformatted with XP, now the drivers are missing and will not connect Internet

  Hello!

  I got a Satellite R15 without recovery disks. I was thinking that I would do a set but never had him. Recently, I started having problems with my MSOffice 2007 software. I tried uninstalling and reinstalling, but files were corrupted and it did not work. My next step was to buy Windows XP tablet edition operating system. I reformatted and installed the software. However, I had to reinstall 3 times before I was able to get actually reformat my hard drive. The new system is missing the Center help for a reason any and was also the drivers missing. I went to the Toshiba Download Center and I have downloaded every driver/program as possible I might need for an XP operating system and install them all. Some of them would not work because they wanted to connect to the internet. Some of them did not work because miss me a "PRC driver." I also installed service pack 2 for Windows XP, but not service pack 3 because I do not have an internet connection. Initially, the modem, ethernet, sound, video and a few things were not pilots. Now I have drivers for all except one - seems to be to shock absorption software and I can not find anywhere. I need help.

  1. I can not always connect to the internet via ethernet or wireless
  2. I would like to have a center to help once again - I use it once a year or more, but it's good to know that it is there
  3. I'm still not able to install MS Office 2007
  4. I would like to get this software for shock absorption.

  Any advice would be much appreciated!

  The HARD drive works? I ran the test Advanced in Hitachi DFT to ensure is has no bad sectors.

  Install the driver 'Toshiba HDD Protection System' on the Toshiba site. Needs to be installed first, its very important common Modules.

  The Office CD is scratched? It works in the other PC?

  Ultimately, you want a Toshiba Recovery Disc, this way you can be sure that all drivers are installed correctly. I believe you can get replacement of Toshiba drives.

• Pavilion dv 2214 you: I'm on hp pavilion dv 2214 UT. can I change the graphics card?

  presenly using the family of chipsets intel 945 graphics. window 7ultimate 32 bit.how can I replace this graphics card? and who is the best comitable with my notebook graphics card.

  thnx

  Hello:

  There is no graphics "card" in your notebook that can be removed and replaced, as they can in many Office PC.

  The graphics card in your laptop is part of the motherboard, and to improve the graphics, the entire motherboard must be replaced by another which is listed in the service manual for your laptop that can have better graphics.

• HP Pavilion HPE h8 - 1287c: looking to update the graphics card in my HP Pavilion HPE h8 - 1287c

  I'm looking to upgrade the graphics card in my HP Pavilion HPE h8 - 1287c. I recently installed a Cosair CX600w diet and I'm looking for a list of compatible video cards, I can update.  My first interest is to do video editing, so I need memory and graphics power. I'm looking to spend around $100-200 dollars.

  Thank you

  Tim

  Hello

  Install the updates to the BIOS listed under Windows 8 , one at a time from the lowest verision.  However, before that, install the latest diagnoses that are displayed on the same page and run a full game.

  Thanks for posting on the forum.

• HP Pavilion dv6-2160 problem with upgrade of the disk

  I am trying to upgrade the drive in my dv6.  The current disc works well, but I managed to fill up the 300 GB or so on it.  I got a new 750 GB 7200 RPM Hitachi drive.

  So, I want to clone the existing to the new and larger drive.  Here is what I tried:

  • Bought a copy of Acronis True Image & burned a boot DVD
  • attached an external 1 TB drive USB for a backup on the laptop drive
  • put the new 750 GB drive in an external USB enclosure
  • tie the 750 GB drive to the laptop
  • Put the boot Acronis DVD in the DVD drive on the laptop
  • Rebooted the laptop and started on the DVD of Acronis
  • made a backup of the laptop drive on the 1 TB drive
  • perform a restore of the backup on the 1 TB drive for the new 750 GB drive
  • removed the original from the laptop drive and replaced it with the 750 GB drive
  • powered on the computer... and nothing happens

  At this point, I can't boot using the boot DVD or even press F10 to go into the BIOS.  When I put the disc original back in, it starts very well and I can restart and use F10 to access the BIOS.

  So, the question is this: why does not the new 750 GB drive?  AND... Why it won't let me boot from a USB device or DVD with the 750 GB drive in the laptop?

  Well, my suspicions were correct. I deleted all partitions on the new disk and put it in the laptop as main drive and allowed me to boot from the DVD drive.  So, I booted the Acronis software and am now cloning the old disc (USB connected) on the new drive and it is automatically re-sizing of partitions.

  Thanks for your help pepe99 & erico you two in this.

• Mahjong solitair problem with some of the challenges dailing loading and others not

  I can make the daily challenges on Mahjong solitaire and then in the same day challenges one flashes and not load. What happened with 3/4 games.   I deleted the app and reloaded it. but everything goes.  I'm in Windows 8.  Only 8.1 because it does not support that I have to use expensive software.

  Hi Lee,.

  I suggest you to update the application and synchronize its licenses. Follow the methods suggested in this link and see if that solves the problem.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  If the problem persists and it is limited to the Mahjong game, then I suggest you to post this question on the Xbox Forums to get help from this link.

  http://forums.Xbox.com/GFW/xbox_on_windows/l-o/f/3064.aspx

  Hope that the information provided is useful. Do not respond if you need more help.

• Problem with Directx 9.0 graphics cards

  Hi I'm Armin. I could play before the sims 2, but once that I wanted to play and he said: could not find any Directx 9 Compatible .0c cards in this system! you know on the other. But I could play before. Pls I need answer!

  Hello

  1. is the issue limited only to the Sims 2?

  2. This does happen with any other game?

  3. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  You can try to download and install Direct X 9 and check if that helps resolve the issue. »

  End-user Runtime Web install DirectX

  http://www.Microsoft.com/download/en/details.aspx?ID=35

  Method 2:

  You can also try to update the drivers from the manufacturer's Web site graphics cards.

  See also:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 3:

  Follow the steps from the link below.

  https://help.EA.com/article/RN1268

   

• Pavilion 17-g127ds: upgrade of processor and the graphics card Intel

  Hello. I was wondering if I could update the processor and graphics card in the HP Pavilion g127ds 17. It has an Intel Pentium N3700 (1.6 GHz) processor. I really want to know if I could pass this processor to something better. Also, if I can improve the Intel HD Graphics, it would be good as well.

  Hello

  Unfortunately NO, you can not upgarde to better CPU or GPU because N3700 Pentium processor and Intel HD graphics card equipped motherboard. If you want to update, you must purchase a new motherborad which is = to buy the new machine.

  Kind regards

• Pavilion G7-2270us: problem with access to the internet 1000mpbs

  I recently updated my speed internet home at ATT Gigapower (1000 Mbps).  Unfortunetly my G7 Pavilion only connects at 100 Mbps.  I checked that my connection speed is set to "Auto-negotiation", but I still see that of 100 Mbps speeds.  Is there anything else I need to do to connect to 1000mpbs?   Y at - it an adapter or other device I can buy and install to enjoy Gigapower?   Thank you...

  Hello

  Your machine uses only "10/100BASE-T Ethernet LAN (RJ-45 connector):

  http://support.HP.com/us-en/document/c03602800

  Try a USB network adapter such as:

  http://au.PCMag.com/USB-30-to-Gigabit/2512/review/USB-30-to-Gigabit-Ethernet-NIC-network-adapter-USB

  Kind regards.

• Having a problem with loading in the combustion chamber

  Hello

  I'm having a small problem I could use help with. I'm not really sure what's going on, but I'm having a problem with one of the pages of my site does not when you try to view the page in Firefox. But if I loaded this page in Safari or Chrome, it loads very well.

  Here is the URL of the page to take a look:
  _{Specific link removed by moderator display ~ J99} < sitename >.com/top-10/top...services/

  No idea why this might be happening or how to fix it? I don't know if it's just my computer, or if others have the same problem.

  Thanks in advance,

  Mike

  There's two of us have confirmed the page will load so I deleted the link to display as it could be construed as advertising.

  P.S. Note only forum content in the resolved threads is now indexed by search engines.

  (Last updated: February 14, 2015 08:45 CEST)

  Solved the locked thread now ~ J99

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Problems with the graphics card when you use AutoCad

  Hi, I have a dell xps 18.4 - i7 with 8 GB of RAM, when I'm working with Auto CAD I face problem with my graphic card, what can I do to fix this? has any experience with that? the graphics card is Intel(r) HD Graphics 4000

  Hello

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience.

  I suggest you to try installing the driver in compatibility mode and tick.
  Reference:
  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please keep us informed.

  Thank you

• Hello, my name is Elias. I'm having problems with Adobe Creative Cloud, I wrote an email is not correct and I can't change it. How to fix?

  Hello, my name is Elias. I'm having problems with Adobe Creative Cloud, I wrote an email is not correct and I can't change it. How to fix it?

  Hello

  See the following topics:

  Bad e-mail address to sign in to Creative Cloud Desktop, how to pass to my email address?

  CC has a fake email, can not change

  Hope that helps!

  Kind regards

  Sheena

• Pavilion 500-054: hp pavilion 500-054 problems with the connection to monitor

  I have a 500-054 pavilion and I for a few years now.  Last year he stop to connect to my monitor (HP).  I check inside the tower and believe me there is no graphics in this card.  I see not where are the vga and dvi ports, but I don't have the graphics card.  Why it just stop working all of a sudden?  Is there anyway to fix this without buying a graphics card?  Or if I should buy a that one should I get?

  Thank you

  According to this PAGE SPEC, the PC has integrated graphics, which means that the graphics are part of the motherboard.  If either VGA or DVI ports do not connect on the screen, then maybe the integrated graphics card failed.  I see that the motherboard has a PCIxe slot, so it could be solved with an inexpensive graphics card.  Assuming that the integrated graphics card expectations it, then a discreet card for less than $50 should be easily enough.  HERE IS a PAGEfor this motherboard compatible graphics cards.  Pich an out of AMD or NVidia

• I can't install cs6 master collection with serial number, the message is: Impossible to condone this number, but in our account page retrieve number series, everything is correct. Thank you

  I can't install cs6 master collection with serial number, the message is: Impossible to condone this number, but in our account page retrieve numbers series, everything is OK. Thank you

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html