HP Pavilion G4 2103tx: cannot start Windows

I upgraded my windows 7 Home Premium to windows 10 a few weeks ago. So this morning I decided to restore it to Windows 7. After the process of my laptop won't start... I've tried 'Launch Start Up Repair' for all 7times already, but it keeps saying "windows cannot repair this computer automatically"... Once I click on "FINISH", it stops. Once I turn it on, the problem is still there. Then I'll do the 'launch Start Up Repair' once again, but nothing happens... Still, it won't start.

I've tried suggesstions your ' computer will start (Windows 7, Vista, XP) ' article but still nothing happened.

Hello

Please use HP recovery DVD/USB, you must have already created Preveniravant the update level, just after the purchase of this laptop - at the factory to reset the system.

http://support.HP.com/ph-en/document/bph07143

Otherwise, try to recover HP Recovery of built in partition (most often it will not work): http://support.hp.com/us-en/document/c01867418

You can remove the hard drive, connect it to another laptop using SATA Adapter USB, copy your data before you go plant for recovery.

Manual - Page 39-40: http://h10032.www1.hp.com/ctg/Manual/c03345638

Concerning

Visruth

Tags: Notebooks

Similar Questions

  • Pavilion dv6700 CNF8171GSY: cannot start Windows

    WHEN I turned on my computer, he loadedfiles then starts the repair but cannot repair the computer automatically. Windows failefk start due to corrupted files. Results of diagnoses shows this drive must be replaced. Please suggest what to do?

    Peter249

    Sorry, but there simply may be much you CAN do.

    Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP. Unfortunately, there is no support of HP recovery related to HP for your PC Product Page.

    You might be able to get support of recovery to one of these websites: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    If they do not, it will be very difficult to find Vista these days because Microsoft sells more of her.

    Good luck

  • Satellite A660-158 - cannot start Windows

    Toshiba Satellite A660-158

    I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

    My problem:
    Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
    -----
    Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
    1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
    2. choose the language settings, and then click Next.
    3. Select "repair your computer".
    If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

    Status: 0xc000000e

    Details: Unable to start menu, since the required device is inaccessible.
    -----
    Please help me! Idon't know what make me)
    Please write to E-Mail: [email protected]

    Post edited by: HunterS7777777

    Hey,.

    And why do you think the hard drive is faulty?
    Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

    Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

    If you have any other questions, please let us know! :)

  • Satellite L40 - cannot start Windows

    Hello

    hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

    * "Cannot start Windows. a recent change in the software hardware might be causing... » *

    It offers the possibility of:
    "* Launch Startup Repair option" * "

    I chose this. WIndows seems to load up, but then I get the following error message:

    Installed program cannot start. Click OK to turn off the computer *.

    I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

    For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

    The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
    No problem at all.

  • Satellite L300-19F starts not-cannot start Windows

    My mobile no dΘmarre, "cannot start Windows. "To solve the problem: restart with the recovery CD.

    I can do that, but first of all, I don't want to try to save the data (and photos) from a hard disk.
    Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?

    Furthermore, all my data on E:\ partition. Will be crushed it during the installation of recovery?

    Please notify. Kind regards.

    > Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?
    No, it is not possible!
    If you should start up using recovery disc then the recovery process would be started and the whole HARD disk may be formatted!

    You can try to start by using a WinPE
    http://www.LiveCD.com/

    This allows you to start the device and access the data on the HARD drive

    You could also build own Windows live CD
    Check this box:
    http://www.MakeUseOf.com/tag/how-to-create-your-own-custom-Windows-Live-CD/

  • Acer aspier L5100 cannot start windows

    Hi, my Acer Aspire L5100 SNID [under the direction of privacy] now cannot start windows.

    Blue screen, status of the Boot Manager Oxc000000f

    required unit is not available.

    I don't have the drive to victory, what to do now?

    Advice from someone...

    probably corrupted file BCD.

    What is your operating system?

  • Cannot start windows after update

    After you install a windows update, my computer cannot start windows, when I boot it.  It seems the windows files.  I don't have a recovery disk (lesson).  I have windows vista, is there anyway to restore windows on my PC other than buying the software.  I confess that I do not download updates often... that is why... It's always trouble.

    Hi, MooreTM,

    Brand and model of your computer, please.  Thank you.

    (1) you are able to start safe mode and do a system restore?

    Start the computer

    Start typing F8

    Select Mode safe mode with networking

    What a load Safe Mode, start > all programs > Accessories > system tools > SafeMode

    Select a date and time before the Windows update that caused the problem

    (2) start Windows and tapping F11 key

    If the Advanced Options screen, select fix my computer

    Press enter

    I suggest the site of the manufacturer of the computer and purchase a reinstallation DVD software.  Cost is minimal ($16.-$20.)

  • Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

    I have a few problems on my laptop [Acer 3810 t]

    -The first problem
    My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

    -The second problem
    because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

    -The third problem
    So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

    What is the error code that you got with blue screen?

    I think that there is a problem with your drive HARD check that by contacting acer...

  • Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

    Original title: need help URGENT

    The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

    'Launch Startup Repair' or 'Start Windows normally' did not work.
    What to do next without deleting my data? Thank you.

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    Data recovery, if required

    1. remove the hard drive and it slave in another computer

    2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

    3. try Knoppix

    http://www.Knopper.NET/Knoppix/index-en.html

    BUT this method depends on your hardware in the computer that failed

  • Get error 0x800106ba and cannot start Windows Defender

    Cannot start windows defender after installing Miicrosoft Security Essentials

    MSE disables Windows Defender from Vista:

    Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

    If it's not:

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

    Turn Windows Defender on or off the information on the link above of Microsoft.

    Hope the foregoing explains the compatibility issues with Windows Defender and MSE.

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot start Windows virtual pc host (I have all the updates)

    -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

    I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

    What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

    Any suggestions?

    Thank you.

    SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

    process host and earlier version of microsoft virtual pc is installed on this computer.

    You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

    Press enter on your keyboard

    See the list of program and make sure that Virtual PC 2007 is uninstalled.

    If your intention is to use Windows XP Mode, make sure that the following two files are installed:

    You must install both files:
    1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
    Restart the system, and then install:
    2 WindowsXPMode_en-we

    Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
    For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

    Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Cannot start Windows Virtual PC host process. Check the log of the events system for more details

    Hello

    I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

    I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

    "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

    He does not point me to the "system event log", but he leaves me here. Any advice?

    Thank you

    Hello

    Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

    Cause:

    Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

    To resolve this problem, follow the steps mentioned in the link below

    Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

    http://support.Microsoft.com/kb/977206

  • Pavilion dv6 stuck on starting windows screen

    Pavilion dv6 stuck on starting windows screen.

    Memory test: past

    Smart check: past

    DST short: FAILURE

    FAILURE ID: 60FTV0-5KS6SG-MFH14J-60UH03

    PRODUCT ID: LF1374AV

    Hard drive 1

    Help, please. I bought a new internal hard drive. But I have no recovery disks.

    Thank you

    XPJ

    Hello

    There are two options available.

    1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

    Order HP recovery disks.

    2 another option, if you came to laptop with Windows 7, you might consider is to create your own installation disc.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version - i.e. Home Premium.) Professional etc. - initially supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is Digital River.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    You may need, additional drivers and software are from here.

    Best regards

    DP - K

  • Cannot start Windows RT and Reset failed (ASUS Vivotab RT)

    Hello

    I have an ASUS Vivotab RT, which cannot start Windows.

    AutoCorrect has failed, Windows/System32/LogFiles/Srt/SrtTrail.txt said each test pass, and root cause is "cannot determine the cause of the problem.

    I tried Refresh/Reset to solve problems, but they all said there is a problem and will not go forward.

    I have download a boot recovery zip someone share online (contains / Boot /sources etc., install included.) WIM), format a Fat32 drive and extract all the files, it starts (power + volume down), but after selecting the language-> troubleshooting-> reset/refresh, it's always "there is a problem".

    In addition:

    I tried bootrec /RebuildBcd, it shows the 0 found instillation. (Although my C: / he windows of course folder).

    I assigned letter of recovery in the form R, run chkdsk/f r: chkdsk C: F, no problems found.

    DiskPart:

    Volume 0 - Windows 25G

    Volume 1-300M

    Volume 2 - system-100 M

    Volume 3 - 4096M recovery Image

    ASUS support site does not help much, and it is out of warranty.

    Thank you.

    Hello

    Since Windows RT came pre-installed and require installation media to retrieve the device, you may need to contact Asus support for assistance. Please visit the link below to contact ASUS support.

    http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

    Since you mentioned that you can view help her out screen in your ASUS RT enrich your life, you can try the steps mentioned in the link of ASUS support below and try to reset the factory setting tab.

    http://www.ASUS.com/support/knowledge-detail/28/5/ASUS_VivoTab_RT/312D2BB3-C6EC-40F0-AFE8-90F6A0622386/

    Note: once the RESET has been performed, all data, applications, settings and personal information will be deleted after initialization.

    I'm really sorry not to be useful in this regard.

    Please do not hesitate to contact us for any further assistance on Windows.

  • Cannot start Windows

    my hp windows cannot start, I don't have an installation disc. I tried the windows memory diagnostic and no luck. I run advanced diagnostic-starting test sytem and give me the ID of breakdown on hard drive 1.

    Hello

    The error code will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

    Kind regards

    DP - K

Maybe you are looking for