HP Pavilion G6 1237 SX bluetooth driver installation cannot find bluetooth in the Panel

Similar Questions

• The ATI driver installation cannot find the previous installation?

  Hello

  Yestreday, I wanted to update my current graphics driver AMD high definition and so downloaded the latest version. Before installation, the installation wizard stated that no previous directory was found and would create a new. That didn't make much sense to me, as I already had the previous version of the driver on my laptop. After a bit of research, I realized that the previous version was installed in the program (x 86), and the new system would be installed in Program Files instead

  My question is; I still want to update the driver and how do I go about this? Must delete the existing one and install the new drivers?

  My laptop model is dv7 - 4198ca with ATI Radeon HD 5470 Switchable Graphics.

  Thanks in advance.

  I have a laptop different but the same 5470 video card. Update all video pilots made me a lot of problems, I had to restore a former win7 restore point to get the Panel to catalyst and switchable graphics to work again.

  During the update, I was warned with the same message as you (no previous directory).

  I suggest, if you dare, to update the drivers ONLY (for version 1.771 I guess) choose updated manual and then uncheck the other characteristics (catalyst, frame MS C++, etc). I also suggest you to create a manual restore point before starting.

• When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  wic_x86_enu.exe

  When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  I had already run the windown update, the problem remains.

  Please help.

  Thank you.

  Hi YongWaiMan,

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information is useful.

• wireless lan driver installation update always fail and the update corrupted my wireless driver I use Samsung series 5

  Updates were recently fired the SW update. I have installed all the other updates the BIOS etc successfully, with the exception of the wireless Lan driver. Instead of doing an update, it has disabled my wireless totally when he said that the installation has failed.

  During my first attempt, I downloaded the driver 100%. Then a pop up message appeared saying that "the installation may take several minutes", and then another Intel logo appears and disappears, but said later that he could not install. After that, I get disconnected from my internet connection. No sign of wireless activity were found. I tried to watch the wireless icon and it was gone. I tried to solve the problem and it says that the only device for my wireless connection is Bluetooth.

  I thought it was just the problem of internet connectivity, so I tried to download the next day, but this time while being connected to a local network. The same thing happened to downloaded 100% and does not once again during installation. I just want you to know that I closed all applications and my laptop plugged in during installation if it helps your troubleshooting. I asked SAMSUNG support and they told me that the problem is with Microsoft, so I should ask them.

  I tried to update for like 5 or more times, but it's the same thing. I use my laptop for work and it's like I can't live without my wireless LAN are not always available. Download of the update becomes tedious because I have to wait like half an hour to finish the download only to find out that the installation will fail. I searched his driver I can install it manually but its nowhere to be found, looks like I'm stuck with SW update

  Hi Saloni,

  Thanks for posting your query on the Microsoft Community.

  Here in this scenario, I suggest you try to re - install the latest driver for network/wireless connection on your computer and check if it helps.

  Step 1:

  Download the driver for the network adapter / wireless computer/hardware. Visit the Web site below.

  http://www.Samsung.com/AE/support/model/NP500P4C-S08AE

  Step 2:

  Uninstall the driver for Wireless LAN / network card.

  Follow the steps to uninstall the network adapter driver:

  a. press Windows + X keys, and then click Device Manager.

  b. search for network card.

  c. right-click the WLAN network adapter , and then click Uninstall.

  d. follow the command prompt, and then restart the computer.

  Step 3:

  Install the network card driver / wireless that you downloaded from the website of the manufacturer of the computer/hardware.

  Please reply with the status of the issue so that we can better help you.

• When I tried to start my computer, I got an error message saying there is no hard drive installed, cannot find the main drive.

  So I got the cd to reinstall windows xp, and he says he does not have a cd drive. I can only choose f2 or f12, but not all options appear. Normal boot and the following three, don't you remember those who, 1 to 4 in any case. Cannot run diagnostics as it says that there is no drive. Tells me to press f1 to retry or f2 for this to be. But f1 doesn't, f2 which brings back me to something that did not help me. I need help! Anyone? Thank you very much. Mr. Spence

  Hello Margo15,

  If you assembled your PC yourself, this may happen because of the bad connection in your hardware.

  You can consult:
  1 make sure your CDROM /dvdrom is properly connected.
  2. the hard drive is properly connected, make sure that there is no loose connection.
  3. Insert the CD of Installation of XP and reboot the PC to check again.

  Is the usable hard drive prior to this install attempts or you install a new copy of XP into a new PC?

  Waiting for your response.

  Thank you and best regards.
  codescientist

• Error: "Windows could not update the configuration to start the computer. Installation cannot move forward"during the installation of Windows 8 64-bit OEM System Builder on Macbook Pro for help using Boot Camp

  Hello

  I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.

  I'm not really a tech guy but I also tried to download virtual box and the same error comes back.

  Can someone help me please?

  Thank you!

  Original title: Windows 8 64-bit English OEM System Builder

  The thread is old now, but it is for those who always have this problem.

  When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.

  Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.

• Windows Installer cannot find readers

  I am trying to create a virtual machine (Windows XP) on a NFS mount.  I added the storage of the physical machine via VirtualCenter UI successfully.  I also use an iso of Windows XP for the installation that is on the same nfs mount.  When you start the virtual machine, windows install working (so is finding the nfs mount) but just after I click the F8 key to continue, Windows is unable to find records of the installation.  It's the classic Windows doesn't have the driver for this raid controller problem, but this time I use NFS for readers, so I do not understand what could be the issue.

  Leave it to BusLogic and just present this virtual disk that I linked in the previous post during installation.  The location where the virtual machine disk file is stored (NFS, SAN, storage Internet) shouldn't matter in your case.

• LV 2011: Error 1334: Installation cannot find a file in data.cab

  I'm trying to create an installation using Setup LV2011. After a success, I test it on PC Windows 7 x 64 and I see this error during installation:

  Error 1334: The file: XYZ cannot be installed because the file is not found in the data.cab file... Continue?

  I check the data.cab file and see the file XYZ. The XYZ file is BAT file that I want to run after the installer is finished, or another file included in the installer.

  Any suggestions?

  Hello

  You run the patch f2? It is supposed to solve a known problem with the construction of large installers, it isn't you receive the error message, but it could be a side effect.

  I checked through the other problems for LabVIEW 2011 known, and I have not found something that seemed relevant. I also checked for corrective action requests and have not found those that mention the same problem.

  I have found some similar questions of LabVIEW 8.5, and in these cases, the culprit was a + in file names. You can check that the names of files in your error message exactly the names of files in the file data.cab. You can also try to change file names relevant to something very simple with only letters.

  I was wondering, are you will be able to include all the other files that do not throw errors, or each file that you try throws errors?

  If you wish to post your project, I would be happy to see if I can reproduce the error.

  Kind regards

  Luke B.

• LaserJet 200 color M251MW: driver software cannot find printer wireless HP Laserjet 200

  I have printer HP Laserjet above 200. It's worked great for me and another person in my office. However, I've changed computers, and no matter what I do, the driver cannot find the printer. The other person in my office can always print very well, and my old computer can print always very well. I have disabled the firewall, turn off network security essentials (it is not yet installed antivirus software), provided the IP address, network address, the name of the device, let the software to set up my connection Wireless for HP Direct print. I restarted the printer, restarted my computer, restarted the router wireless, connected the printer directly to my computer via the supplied USB cable. It does not find the printer. I can ping to the IP address of the printer and get a quick response. I can print to other printers on network in the building, I just can't connect using HP. !

  None of that helped him. What is strange, is that when I plug the USB in, it feels immediately there is a printer is connected. It starts to install the software, asking me to acknowledge T & C before you get a read error "unable to create the folder to extract webpack". I am an administrator on this computer and the network, and he gave permission to run. However when I use the driver from HP, it cannot find the printer, even with connected USB? The HP print and scan doctor finds the printer immediately, on the network, but then try to install the same software that does not find the printer.

  I have finally however solve the problem, the key was to not install all other HP services, other than those needed to print. Deselection of all the software options (components 6-8) allowed him to immediately find the printer maybe 2 seconds, select these elements and not found the printer. HP needs to offer a thin driver that actually works, rather than trying to sell ink, just something that allows you to print would be useful. It's frustrating to spend 6 to 8 hours trying to configure a printer when the problem appears to be with the driver.

  For others with this problem, run the HP print scan doctor, download the driver again through this software, deselect all option provided with the driver software and continue.

• What can I do when Windows Installer cannot be excessed during the uninstallation of a program?

  Windows Installer cannot be excessed, or it does not.  How can I fix the problem?

  Hi Leapole7,

  1. This occurs when you try to uninstall a specific program?

  2. you remember to make changes to the computer, after which the issue started?

  I suggest to try the steps from the link to the following article and check to see if it helps:

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  I hope this helps.

• For microsoft office 3,1,5 avery Wizard software installation cannot find Microsoft Word

  Original title: the software installation wizard for microsoft office 3,1,5 avery will install on vista home basic. error comes up cannot find microsoft word. what I'm doing.

  as I mentioned above, I can not install avery Office Assistant 3,1,5 will not install with Vista Home Basic. error comes up cannot find microsoft word. What should I do?

   
  Hello
   
  What Microsoft Office version do you have installed?
  
  You can follow the methods mentioned in the article in order to help solve the problem.
   
  Avery Wizard Setup cannot locate word
  http://support.Microsoft.com/kb/288387
   
  Hope this helps
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error message when you try to install Windows Imaging Component ' wic_x64_enu.exe «installation cannot find the file update.inf...» »

  I'm installing MS wic_x64_enu.exe and get the error message: «Setup cannot find the update.inf file needed to update your system» I run SFC.exe and found no errors. I also reinstalled. NET40. and I still get the same error message.
  I am Windows 7 Ultimate SP1 64 bit on a HP PC with an AMD Phenom 9150e Quad Core processor 1.8 GHz and 8.00 GB RAM.
  I worked on it for a few days without result.
  Any help will be much appreciated.

  Giles

  Try this search http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-imaging-component-installation-fails-in-my/a13c1e1d-361e-4601-8fc4-4d416edef853?tab=AllReplies#tabs in the registry.

  Run-->--> look forthis key regedit. Already installed.

  I have encounterd this problem by reinstalling .NET.

• Windows Installer cannot find the "Crusher".

  How can I get rid of these annoying errors on windows install, impossible to find the "Crusher?

  The first message appears usually when I try to start a program or shut down the computer, 'Shredder.  Error 1706.  Valid any source not found for the mill product.  Windows Installer cannot continue. "If I click OK it starts a series of Wintows with"Please wait while we configure Shredder. "Come then:"the component you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the disc of "Destroyer" and click OK. "(I have no such disc.)  and "the path '1' is not found."  It's the bottom of the rabbit hole and I click on CANCEL.  No harm, no fault.  I learned to, click CANCEL has the first appearance of this embarrassing sequence of messages and as if I knew what I was doing.

  If someone out there REALLY knows how to "fix" this?

  Proudcon.

  Its caused by a third party utility that you have installed, possibly a maintenance utility

• After installation cannot find the printer driver on my mac

  I downloaded hpprinterdriver3.1.dmg from the site web from apple and installed.  Installation was successful.

  However I can't find the driver on my computer.

  Is there something wrong?

  Thank you

  Owen

  If you haven't already done so, try to reset the printing system.

  OS X Mavericks: reset the printing system also of Yosemite

• [G4 Pavilion] Starting from 8.1 to Windows cannot install DVDs using the UEFI.

  I have a g4 of Pavilion which had 8 Windows installed, until I decided to upgrade to Windows 8.1. I followed the instructions I found in other posts on this forum to be able to boot from the installation DVD - I had both disable secure boot and enable legacy Support, because otherwise, the system ignores the DVD drive (it is not even appear in the F9 Boot Menu if Legacy Support is not enabled!). The problem is that my HARD drive is formatted in GPT partition scheme, and the DVD of Windows 8.1 fails to install the OS on the drive when starting in the traditional Mode.

  What should I do to be able to start on the DVD Setup mode UEFI? I even tried to boot from inside Windows 8, itself, using the options advanced boot, but as soon as the system reboots, UEFI throws an error indicating that the computer is unable to boot from the DVD. I know that the DVD is * NO * damaged in any way since 1. I am able to start inside in the traditional Mode and 2. I was able to start it in UEFI mode on another computer.

  I had actually done this, but install the 'dirty' update messed with stuff I had installed so I decided to do a cleaning.

  Anyway, I solved the problem on my own (I discuss with a very nice representative of HP chat support, but she could not give me a solution that does not necessarily need to reformat the entire disk to an MBR partition scheme) through the following steps:

  1. created in a single file system FAT32 on a 8 GB USB key.

  2. copy the contents of the installation on the USB DVD. I thought that the root of the problem is that the system is not allowing me to access the DVD player at the start, I might as well try to see if it recognizes other files systems.

  3 restarted, you press F9 to start and selected the USB in the list of available boot devices.

  4 here, managed to start the installation on the UEFI mode Win8 DVD, as well as the installation worked flawlessly.

  So, it's the thing people. It still sucks that it is necessary to go through all this trouble to install an OS, however.