HP Pavilion G6 1245sd turns is not on

Similar Questions

• Pavilion g6 - 1d18dx turns is not on after replacing screen

  Hi all

  I have a HP Pavilion 1d18dx g6, which lights up ANY after that I replaced the screen. The power lights do not light when I press the power button. When I plug in the AC adapter, the light near the orange plug is not even turn on. I also tried to plug in the AC adapter without the battery inside, but again - nothing.

  I replaced the screen because he had cracked after that I walked on it. Although the screen was broken, the computer itself has worked well. I continued to use it with an external display.  After what seemed to be a successful replacement, I pressed the power without answer button.

  My question is: I did something wrong during the replacement of the screen?  I need help to determine what went maybe wrong and what parts I should look / replace. HELP /.

  PLEASE AND THANK YOU

  Product number: B3P85UA #ABA

  Hi @brisl0 ,

  Thank you for visiting the Forums HP's Support and welcome. Thank you very much for the detailed information on the replacement screen. Here is a list for your page 72 of the manual. Page 70 has the power on that connector. That should be checked as well.

  I inspect the motherboard in order to have a crack or damage on it.

  I hope this helps.

  Thank you.

• Pavilion 15-n005tu: laptop does not completely close down

  Hi, using the 15-n005tu Pavilion. The laptop can not completely stop, after the screen turns black, power light comes on over the wifi light. The fan on too. I tried to do an update of the bios and chipset, but this has not solved the problem. Kindly help...

  Mathew

  Hello

  Try disabling the hybrid Windows 8 start - you can do the following.

  Right-click in the battery icon in the taskbar and select Power Options - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• G6-2005ax Pavilion: Bluetooth auto turn off HP Pavilion g6-2005ax

  I have a HP Pavilion g6-2005ax with 10 64-bit windows. After the upgrade I have problems with the software resets. For example. The bluetooth is disabled automatically. When I enable it and restart the bluetooth system is disabled again. I want to know if there are any bluetooth driver being upgraded for windows 10 for my laptop. Or in any case in which I can use bluetooth.

  Hi @Yogizer,

  Welcome to the HP Forums!

  This is a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you have upgraded your system from Windows 10. Since the upgrade, you have encountered problems with the software resets. An example is that your bluetooth is disabled automatically.  You need to activate every time that the computer restarts.

  When I checked the page drivers and software of PC Notebook Pavilion g6-2005ax there is not all the updated drivers for Windows 10.  This means that HP has not tested 10 Windows on your laptop. This does not mean that it will not only work the result is unknown.

  Here are two links that should help you in the acquisition of pilots.

  HP computers - update drivers and software with Windows Update (Windows, 10, 8)

  Download or update of software and drivers for HP computers

  Alternatively, you can try the following steps.

  Step 1. Go into Device Manager and click on Bluetooth to expand the list.
  Step 2. Right click on "Bluetooth Peripheral Device" you want.
  Step 3. Select "Update driver software."
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)".
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  While you are in Device Manager, right-click on your Bluetooth device and choose Properties.

  Click the power management tab.
  If" allow this computer to turn off this device to save power' is checked, please delete, then click on apply.

  If you are unable to connect to a Bluetooth device, try the following:

  1. type of step' change device' in Cortana.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device application option.
  Step 5. Click on save changes to save the settings that you select.

  So, you can try this:

  Step 1: Go to Cortana and type "services.msc" and press ENTER.
  Step 2: Now find 'Bluetooth Support Service' and double click on it (under the general tab you can change startup automatically if you wish).
  Step 3: Now click on Connect tab and type "Local Service" without the quotes, if it is not already displayed.
  Step 4: Now, remove the passwords and leave the password field blank.
  Step 5: Click on apply in the lower left corner.
  Step 6: Click on the Recovery tab, and make sure it is set to restart the service after the failure of the first and the second and change it if necessary and click on apply.

  As this occurred after upgrading Windows 10 and MIcrosoft offers support for Windows 10, you can contact them for assistance.

  Microsoft Corporation / customer service

  1-800-642-7676

  Microsoft contact us

  Please let me know if this helped.

  Good luck!

• iPhoto open, black page, the wheel turns do not.

  iPhoto opens to the black page, icon wheel turns do not.

  with no details, we cannot help-

  What version of the operating system and iPhoto? What has changed since it worked?

  LN

• I am trying to replace my iphone 6 s model n °: A1688, FCC ID: BCG-E2946A, IC: 579C-E2946A. but I can get the serial number because its doesn't turn only not on how can I replace it?

  I am trying to replace my iphone 6 s model n °: A1688, FCC ID: BCG-E2946A, IC: 579C-E2946A. but I can get the serial number because its doesn't turn only not on how can I replace it?

  Take it to your local Apple store. They will find it for you.

• HP pavilion dv2000 key board does not

  Hai

  HP pavilion dv2000 key board does not. I have activated the key online Board that also does not work. because my hp utility cd has been damaged, I changed my OS to windows 7 key board ultimate .the rest is notworking .then I used a USB key Board that works also do not. main problem is that I couldn't filled my Os Installation with to enter the pc name. Plese help me. the original OS was Vista.

  with our thanks

  Joseph

  Hello @pxj,

  I understand that your laptop keyboard does not work, and that your alternative keyboard does not work as well. I'd be happy to help you in this case!

  As your drivers available of the system does not contain the keyboard for Windows 7 drivers, I recommend you to get a drive recovery to re - install Windows Vista on your system. This can be done by following this document on getting a HP recovery disks or USB HP recovery disc.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• My iPad turns off not even with hard reset. Suggestions?

  My iPad turns off not even with hard reset. Suggestions?

  Is your damage of Power Off button?

  If not, try

  Restore backup

  Restore like new

  http://support.Apple.com/en-us/HT201252

• I have a HP pavilion and when turned on when trying to start Windows, it happens with ERR2ERR3 please can you me what could be wrond

  I have a HP pavilion and when turned on when trying to start Windows, it happens with ERR2ERR3 please can you me what could be wrond

  It could be a faulty hard drive.

  Can you press F10 after turning on and you to the diagnostics menu to run the test of the car?

• Could not turn off not disturb

  Hello
  I turned on do not disturb, restarted my phone and now I can not turn, do not disturb off the coast. I can change the volume through settings and the phone rings while Do not disturb is activated.
  The restriction is that I can't change the volume using volume keys or do not bother go far. Work volume keys, I tested with Diagnostics. When I press one of them, I see the icon of DND and a now key that does not work when they are hit. Here too, I can change the volumes of media and alarm, but not the volume of the ringtone is specific to DND.
  Restart the phone, or to go in safe mode does not help somehow.
  Please notify

  Okay, so I fixed it and it occurs once after that. The solution is to reboot the phone and press the volume key to turn the volume down until reach you vibrator, continue to press until a message appears next to the end key now, moment at which the button will finally work and finally turn off DND. The message goes something like this: 'until the DND's off... ' Nolramlb thanks for the tip by pressing the volume keys upward on several occasions, it obviously helped a lot.

• my computer turns off not and the hibernation...

  my computer turns off not and the hibernation...

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  The above is kind of prerequisites and may solve the problem.

  ==========================================

  A Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem
  and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the WiFi network card power management,
  Modem and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal?

  Hello

  My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal? I can't see it anywhere, should I worry?

  Some laptops, like my Envy 17-3002ea loan, have the certificate of authenticity Windows hidden in the compartment where the hard drive and the battery are.  First try.

  Other portable latest and which may include yours, have the Windows license key encrypted in the BIOS.  There is a thread on the Microsoft communities that verifies that. The thread is worth reading.

• I have a Pavilion 6620f and it does not show me the type of motherboard. It lists only the DVT 2AB1

  I have a Pavilion 6620f and it does not show me the type of motherboard. It lists only DVT 2AB1 as the system board. How to find the right model MB?

  No, this isn't what I remember seeing at the same time. I downloaded a program called BeLarcx Advisor, he told me I have a FOXCONN 2AB1 DVT and I have an ATI Radeon 4200 in there.

• HP Pavilion 15 p150nh: laptop does not turn off completely

  Hello!

  I have a laptop HP Pavilion p150nh 15. It does not turn off. If I want to close it will turn off completely. I have black screen but the vens are still on and the buttons start led is also single beds. I've tried everything. Updates, hard reset I was looking for BIOS but nothing.
  Help me please!

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• HP Pavilion 1209sz g6: laptop does not turn on

  Hello

  My HP Pavilion g6-1209sz lights. When I press the power button, this will happen:

  -I can hear the computer start, but the fan won't move;

  -l' screen stays black

  -the led power button on and near the power adapter is turned on (white), the led on the wireless button is on (red)

  - about locking cap button led flashes 3 times.

  This has happened before:

  Yesterday, that the computer does not light at all, nothing at all, except that white led near the power adapter is on.

  After that I disassambled computer, thinking he was dead, and at least I'll have fun. I removed the motherboard in order to clean the fan, which was completely clogged with dust. Now, I assembled the computer again and it seems in better shape than yesterday, because at least I can hear it lights and more LEDs are on. So I have little hope that he is not yet dead.

  Maybe I made a mistake when I assembled the computer. I read http://support.hp.com/us-en/document/c01732674 that the number of flashes on the cap lock button can help to know what hardware has a problem here.

  Thank you in advance if anyone can help me.

  Flash123

  Hello

  I found the answer to my problem here: http://support.hp.com/us-en/product/hp-pavilion-g6-1200-notebook-pc-series/5145704/document/c01732674/

  This page lists the meaning the number of flashes on the cap lock button. The 3 flashes, I had meant that the RAM had a problem. He simply has not been installed correctly.

  After that, I was able to start the computer, but he has immediately told me that the fan was not working properly and that it would be closed within 15 seconds. Next step is to check the fan, maybe that I also made a mistake after you have cleaned the fan.