HP Pavilion g6-1278sa recovery partition does not

Recovery partition does not work after the creation of new partitions. Where can I get the restore CD?

Advertisement

Hello

You can order a set of replacement recovery disks using the link below.

http://support.HP.com/us-en/document/c00810334

If you have a problem with this link, order them directly from HP.

If you live in the United States, contact HP here.

If you are in another part of the world, begin here.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • HP Pavilion G6 - 2221ES: recovery Partition does not work after update from HP.

    Hello

    I've just updated my laptop using this patch from HP: sp63774.exe

    It was supposed to fix a recovery environment that slows after reclassification of 8.0 to 8.1 Win Win

    Now, I can't get into the recovery Partition.

    It justs gets stuck after the message: "Please wait...". ».  I get the options to restore the system. Just a black screen.

    link to patch   (Section Software-Solutions)

    Help, please.

    Thank you.

    Hi @jose2016,

    Thank you for the update.

    Did you create your recovery media before making the update for Windows 8.1? If you create a recovery USB disk, then a labour recovery partition. Create a recovery USB disk (from support.microsoft.com). You can access the Recovery Manager of Windows? Computers HP - performing a recovery of HP (Windows 8) system. Another link that can help with the Recovery Manager's computers HP-HP System Recovery troubleshooting (Windows 8)

    You can try to do a restore back to before the update has been installed? Computers HP - using Microsoft System Restore (Windows, 10, 8)

    You said that you do not have a recovery partition. If you select disk management, should always data on this subject and he is in good health?

    Were you able to boot in safe mode?

    Have you tried to run the troubleshooter in Windows?

  • Recovery partition does not start!

    Hello dear forum participants!

    I have computer hp pavilion dv6 laptop, recently I reinstalled original OS (win7 home 64 bit that comes with the laptop) to win7 Home premium.

    Now I want to return to the default settings, and I'm unable to start on the HP Recovery partition.

    When I press F11 at startup it boots regular OS, but not the HP recovery software.

    How can I get my work as a recovery partition?

    Problem has been solved!

    It seems that recovery partition boot records have been corrupted by the installation of the non-native OS, but the directory structure and files were intact.

    Steps performed:

    -J' created the recovery USB using HP USB recovery Flash Disk Utility disk

    Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-77449-1&lc=en&dlc=en&cc=us&lang=en&os=4062&product=4057188

    -Fact flash drive bootable using EasyBCD utility

    Link: http://neosmart.net/dl.php?id=1

    just add a new entry to point the finger removable WIM image, see documentation for EasyBCD

    http://NeoSmart.NET/wiki/display/EBCD/EasyBCD+documentation+home

    It's quick and dirty solution, there will be more estetically without creating recovery USB drive, simply add the for the recovery partition boot record.

    Thank you all for attenction!

    IonCannon

  • error 0xC0000225, recovery partition does not start

    Hello

    I have a HP dv7 with Windows 7 Home premium 64-bit.

    A few months ago, I did a factory restore, the recovery partition start (I have no recovery disks). After that, I thought to divide my C: partition where Windows is installed, and I did it with Windows disk management.

    So my new scores were: C: D: with recovery, OS, E: HP_Tools and g.: the new partition.

    A few days ago the sistem ran very hard, so I thought I do another factory restore from the recovery partition. When I rebooted and you press F11, I got the "0xc0000225 error".

    I have a Windows 7 Home Premium 64-bit bootable drive and I tried Startup Repair tool and other repairs of sistem, checks HDD, but everything seems to be ok.

    I reinstalled the operating system, from the disk bootable on C: (OS starts and works well) and let the other partitions as they were... but it seems that the recovery partition still does not start if I can do a restore from the factory with all the drivers and utilities, as they were at the beginning.

    Any ideas on how I can do?

    Thank you!

    It seemed that it there was not much I could do about this problem. My disk is dynamic, there is no Recovery Manager from the Start Menu, there has not been any creation of HP with HP folder recovery support. I managed somehow to make a repair disk, I tried it but no results, the error kept popping out every time.

    I inserted the Windows 7 disc to try to delete all partitions, including the recovery and HP-tools and do a Windows Installer Cleanup, but the Format, New and Delete buttons are inactive.

    I did some scans disk and memory tests, everything was ok... I started with a disc of Hiren and accesed the HARD drive with a program based on linux and so I managed to delete the partitions.

    After I installed a new copy of Windows 7 to work with my SN and everything was ok. Unfortunately I lost partitions recovery and HP-tools, but at least it works well again.

    Thanks for your all your support.

  • Recovery partition does not not to CDR Manager

    Hello world.  A person cannot solve my pb?

    I have laptop Hp Pvilion Dv6-1355dx. I bought it in January 2010. Until this month, it was working fine. But now I have a pb of HAV.
    Actually I was recovering from my windows 7, there is disruption because of electricity pb. After that the BONES of my laptop was not load and I cldnt find recovery manager. Then I installed the new windows 7. (because I also do not HAV recovery disk)
    My Hp software are not damaged, I installed hp software fm my laptop, now the BP is MY RECOVERY MANAGER IS NOT ABLE to INSTALL, I can still see RECOVERY PARTITION here.
    Now what to do?   Please tell me how can I use my RECOVERY PARTITION with Recovery Manager.

    forward.

    Concerning

    It sometimes works for a start-up Recovery and do a factory restore.

    1.right - click on the "Computer" icon and select manage.

    2. This will launch the Microsoft Management Console.

    3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.

    4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."

    5. when the warning message appears, select 'Yes' – Reboot and it will automatically start in the Recovery Manager (without press F11).

  • How can I reinstall Windows 7 Home premium on my MSI FX600 OA if the recovery partition does not work?

    So, I bought this laptop MSI FX600. It had Windows 7 Home premium OA (OEM I guess). It also contains a recovery partition.

    After awhile, I had to reinstall windows, so I downloaded an iso of windows, put it on a USB key and reinstalled. but the product key doesn't work though I should be able to use it because it is not used by any other computer. How can I reinstall windows and activate with the product key OEM on the bottom of the laptop? somehow the recovery partition no longer works, so that will not help either. Also, where can I download the iso right for reassembly?

    too bad that I already fixed it. I installed the version English, but anyway my laptop only supports the Dutch version. Thank you for your abundant answers.

  • Recovery partition does not

    Hi all

    I'm a newbie on the site and would very much appreciate if you wise experienced could help me with this one.

    I have a HP Compaq dx2250 desktop running xp pro 64 bit. It is about four years old now and normally works fine until about a fortnight ago. The system becomes slower and slowest of the day. Video and audio are now impossible to watch. I scanned for viruses and malware, clean all the files, defragmented, and it's always the same. I have G.bytes of free space on the disk, so I decided to do a recovery reinstall from the recovery partition. Press F11 or make windows, and the result is the same. He goes through the process to return to factory settings, then stop at a window 'Restore more CD'... ?? I chose the language option and then get the following message.

    "Restore Plus CD error.

    Restoring more cd is designed to work properly on HP computer systems only. »

    It is a real system of HP, I started to plant one or two time settings in the past with no problems. I never had the recovery partition, I've never had any CD I'm stuck with a PC crawl along at a snail's pace. Please help me... !

    Thanks for any help on this

    Hey, Alex:

    If this isn't a motherboard HP dx2250 you have replaced the one with (perimeter), then recovery disks don't work either.

    You will need to purchase a copy of XP or get a XP OEM installation disc and use the product key at the top of your PC case to activate the installation.

    If you replace the motherboard with a card mother dx2250, is the serial number and model # present in the BIOS?

    If this isn't the case, maybe that's the problem.

    If it isn't there, you can use this utility to reset the serial number (and possibly the model number) in the BIOS.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=PSG_I14992-36908&prodTypeId=12454&prodSeriesId=316720

    You cannot run this program by an internal or USB floppy as the file checked out when you double-click to run it and request a floppy disk to be inserted into a floppy drive, then the file creates a boot disk with the necessary files to change the serial number.

    Paul

  • T430 recovery partition does not

    The recovery on my T430 partition doesn't seem to work - I can't create a DVD out of it (ends with an error "rc = 9"), nor can I use the partition itself for recovery (the process starts but fails). How can I get a DVD to use?

    Nice day!

    in your case, the best option is to contact the Service and request a set of recovery DVDs.

    http://support.Lenovo.com/en_US/detail.page?docid=PD008370

    Kind regards.

  • Recovery CD does not completely load.

    I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

    Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

  • ENVY 15 3040 nr recovery disc does not

    Hello

    I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

    The system recovery media does not support this computer.

    You are not able to restore the system with the media.

    0110 A9P60UA #ABA - A9P58UA #ABA

    Help, please!

    Hello

    Assuming that it's just a problem with the recovery media, here's another solution, you can try.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • the system recovery media does not support this computer

    I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

    Hello

    You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

    There are a few options available.

    1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

    2 create your own recovery media to use to run the installation - it would be my personal preference.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • MY RECOVERY MEDIA DOES NOT DV6-3170EE

    Hello, I have a HP Pavilion dv6 - 3170ee Entertainment Notebook PC Core I7, drive HARD 500, Ram 4

    I had a problem while I was trying to find my laptop. one of the brackets 5 recovery DVD does not work anymore. can someone help me find online recovery support please.

    Thank you.

    I'm looking for recovery media. Use the following URL.

    http://support.HP.com/us-en/document/bph07143

    I highly recommend that you order a usb instead of a disk set support. USB support is, unlike DVDs, very durable.

  • Published: Recovery Partition do not have day

    I posted this under Yosemite, instead of El Capitan - very sorry.

    I ran updates on iMac 10.11.6 10.11.5

    The update has not changed the recovery partition, it is still at 10.11.5

    Ran 10.11.6 combination update, still do not update to recovery partition.

    What should I do to get my recovery partition in harmony with my primary OS version?

    Thank you!

    What makes you think that your recovery partition is not up-to-date?

  • Satellite A30 - 203 - recovery disk does not work

    Hi all

    I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

    Thank you

    Hi dimation,

    It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

    In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

  • For 1000-zx satellite recovery disk does not work

    XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

    Hello

    Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
    However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
    In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

    Good bye

Maybe you are looking for

  • Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

    SpeedFan 4.25 is on my Toshiba Satellite SM30 604.Until recently, the CPU usage shown was variable.Compared to a low percentage (green dots) to somewhere around maximum, according to what I was doing (I have never game, but use purely professional th

  • HP 15: start-up goes into Office, not the menu mode START

    So I think this might be a frivolous job, after my upgrade to windows 10 8.1, my laptop comes in DESKTOP mode instead of the START MENU mode. Is this normal or have I done something wrong? W.P. "Bill" Marshall

  • ENVY Touchsmart j063cl 15 HP

    I would like to find the drivers for Windows 7 for HP laptop. Here are my needs: BCM20702A0 USB\VID_0A5C & PID_21FB\240A649EA271 ETHERNET CONTROLLER PCI\VEN_10EC & DEV_8168 & SUBSYS_1962103C & REV_0C\4 & 28F560F & 0 & 0 & 00E6 NETWORK CONTROLLER PCI\

  • Two virtual machines

    I'm Mac 10.6.4 with Parallels desktop. I have a Windows 7 machine without apparent difficulty. I then discovered that I also need Windows XP and purchased a version upgrade. When I try an installation it will not recognize Windows 7 and I'm stuck. It

  • Print window too big for screen - occluded__ of the "print" key

    My father-in-law is partially blind. It uses 64-bit Vista (because he could not get XP for its new PC). He has a problem when you try to print photos. Manager of photos up the print dialog window, but the "print" key is above the bottom of the screen