HP Pavilion g6 - 1317AX: need to determine if the TPM chip is installed on HP Pavilion g6

Greetings. Please advise if HP Pavilion g6 - 1317AX comes with a TPM chip installed.

I use Win 7 54 bits Ultimate and you want to run Bitlocker with TPM.

Thank you very much in advance for your help.

Hello

No, no TPM chip on your computer.

Kind regards.

Tags: Notebooks

Similar Questions

  • Update Firefox claims needs updated Flash but the current version is installed

    Update, Firefox claims that needs updated Flash when Flash is the most recent version.

    This has happened

    Each time Firefox opened

    is to update to the new version of Firefox in 32 or 64 bit Linux

    You can see the plugins installed on the topic: plugins page.
    If you set the plugin.expose_full_path pref true on the subject: config page displays the full path of plugins on the on: plugins page.
    It is best to not only let pref set true as it exposes the full path to the web servers, so reset this pref to false after you're done with the topic: plugins page.
    You can reach everything: pages through the address bar just like you open a Web site (topic: is a protocol such as http: and used for internal purposes).

    See also http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins

  • Pavilion P6000: where is the TPM chip, located on the card mother VIOLET-GL8E M2N78 - LA 513430-002

    I am trying to locate the TPM chip on my PURPLE-GL8E M2N78 - 513430-002 motherboard to remove it and install on my new motherboard because of my HARD drive lock without the chip. Running Windows 7 Home Premium.

    Frederick_B

    Thanks for the info. Unfortunately I can't back up the HARD drive to fix. The old tower is more regognizes the HARD drive either. What I read this other safety device to prevent theft. I have to chalk this up to my lack of knowledge on the MPT and BitEncrypt software. I'll just have to buy another copy of Windows, and to reformat my HARD drive or buy a new HARD drive so I can't reformat. I wish I had found this forum until I "shot myself in the foot' on this one. Thank you for trying to help.

    Eric

  • What drivers do I need to connect to the internet after a reinstallation of Windows XP Professional?

    Hey,.

    I need the drivers that allow me to connect to the internet in Windows XP Professional.

    Wired connection; Windows is not currently recognizing the modem, but he has done it before the reinstall.

    I have not much information for you as I do the installation on one of the computers to work. If I get a general idea of what I need drivers that would be quite useful because I can pass my quarter fumble through them! Links to drivers would be super awesome!

    Thank you very much!

    Axel

    I need the drivers that allow me to connect to the internet in Windows XP Professional.

    Wired connection; Windows is not currently recognizing the modem, but he has done it before the reinstall.

    I have not much information for you as I do the installation on one of the computers to work. If I get a general idea of what I need drivers that would be quite useful because I can pass my quarter fumble through them! Links to drivers would be super awesome!

    Thank you very much!

    Axel

    The drivers you need are determined by the hardware you have.  You need to know the brand and model in order to go to the manufacturer and download the drivers for this specific device.

    Since then, you didn't give any material information...

  • Pavilion dv7, tpm chip enable - not-possible or not?

    HP Pavilion dv7-4285dx laptop. This laptop has TPM or not? bought this machine about a year ago. didn't want to turn on Bitlocker and Bitlocker-to-go at the time I intend to upgrade to win 7 ultimate/Enterprise.

    When I got to the hardening of the BONES, I checked the BIOS - but could not find the option to turn on the TPM. I read many pages of documents to support, so far have not found any mention of TPM being on the MB. I'm seriously believe that it wasn't an installed feature.

    Normally the TPM is not installed in the notebook computer or consumer

    This feature is part of the PC company the of except in the two countries where it is illegal to have RPM installed on a PC.

  • Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column determines if the entry price column is subtracted from the price of output column or output subtracted

    Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column; Determines if the entry price column is subtracted from the price of output column (buy) or subtracted from (Sell) entry exit. Thank you for your help

    Hi B',.

    Buying and selling in column B

    Price of entry in column c.

    Exit in column D price

    Formula (and outcome) in column E

    If the column will B always contained 'Buy' or 'Sell', it works. It is default to a calculation of 'sell' if sale or has been specified.

    E2: = IF (B = "Buy", D - C, C - D)

    If you want to delay the calculation until the amounts entered in C and D, use this version:

    E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, C - D) ")

    If you want to delay the calculation until all three ducks are on a line (B contains buy or sell, C and D contain both data), use this version:

    E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, IF(B="Sell",C-D,) "" ")))

    Third version used in this table.

    Kind regards

    Barry

  • HP software for the HP Pavilion dv6-6117dx (need to recover without the System Recovery Manager

    So I installed Windows 8 but has been forced to delete all partitions, then I installed Linux Mint 14 Nadia, now I'm back to Windows 8 and I want to get Windows 7 Home Premium back or Windows 7 Professional (law of demotion of Microsoft)

    And I can not download the software that HP provides when you first set up your computer, but now I have no HP Recovery Manager or Assistant, so I need to reinstall all the programs and go back to Windows 7 Home Premium. But I don't want to spend money on it like spending $15 on 2 stupid recovery disks, what a scam! OK can someone help ASAP as Im on Windows 8 Professional

    If you do not burn your recovery using HP Recovery Manager disks before you delete all partitions there is no way to download the files now. You place your order of recovery disks is the best option.

    ------------------------------------------------------------

    If you can read the Microsoft Windows 7 of 25-character license key attached to the bottom of your laptop, you can download a Windows 7 ISO file to burn to a DVD. It must be the same version that is listed on the Microsoft COA sticker. Windows 7 Home Premium

     

  • I bought the iphone 6 s more time face in Saudi Arabia. I need to check if the original phone to apple or duplicated. So please help me find this problem.

    I bought the iphone 6 s more time face in Saudi Arabia. I need to check if the original phone to apple or duplicate. So please help me find this problem.

    Hey there, I guess your question is "how to determine if my iphone is true or false. If Yes, then if you go here https://selfsolve.apple.com/agreementWarrantyDynamic.do just enter your serial number and code and if his 'real', then it will show you the model of the Iphone and guaranteed dates. If this isn't the case, then you know the rest. If this is not the case then try to download apps from the app store and run or can it connect to itunes. Tell me what best worked: D - Jon

  • How to determine if the variable exists?

    I need to find a way to determine if a variable exists.  Because if I don't and evaluate a variable that does not exist, I get error.  This is why I need to do this.  I need to print only the failures in the sequence and the problem is that I can print only the failures that causes failure of the sequence.

    I have reduced that there is a Boolean status in the list of TS results. StepCausedSequenceFailure.  The question is this variable exists only when the step caused sequence failure checkbox is checked, otherwise this variable is not in the results.  Thanks for help.

    Use PropertyExists ("Locals.ResultList [x]. TS. "" "StepCausedSequenceFailure"), where "x" is the index of the step that interests you as a precondition to any approach that will access this value. "

    I hope this helps.

    -Jack

  • Subtraction and the determination of the base

    Hi everyone - I need help to determine how best to make a determination of the base then subtract leaving just the tops.  My data are profilometry measurements on a substrate surface.  As you can see in the table below the substrate surface is pretty simple but not lying flat on the scanner table.  I'm looking for a simple method identify the linear base line, then he subtract from the raw data, leaving the four peaks with essentially a zero/horizontal) basis.  Then I can use the Ridge detector to identify the peaks and their locations so that I can make additional calculations (especially area of the PEAK and average maximum height).

    Any suggestions on the best way to go about this?

    An polynomial fit using the "less absolute residual" is relatively sensitive to outliers and seems to work quite well in this particular case.

    See if it works for you.

  • I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all).

    Hello!

    I had a copy of Windows 7 Ultimate SP1 for quite awhile and discovered that I need a new facility (the computer refuses to Windows to run at all). I picked up my installation disc and everything, only to find out that someone stole completely he reapply. I am unsure weather or not it is enabled or whatever it is. I tried to call Microsoft technical support and they said to go to the retailer I bought since then, but the retailer in question no longer exists. I'm just screwed?

    Thanks for your help!

    You can retrieve the product key, and then use it to re-download a new copy:

    Here are four utilities, which can display your product keys if they are still there:
    Belarc Advisor: http://www.belarc.com/free_download.html
    (He did a good job of providing a wealth of information.)

    Also: http://www.magicaljellybean.com/keyfinder.shtml
    and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
    and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

    Go to the recovery of the software Page and then enter your key:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    If you plan to upgrade to Windows 7, see:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  • How to determine if the device supports portrait / landscape views?

    Is there an easy way to determine if the screen of the device supports portrait / landscape views?

    (We need to provide different settings for the user)

    Until recently, we used check similar to the following:

    If OS > = "6.0" & AccelerometerSensor.isSupported)

    but this code does not work on the new Bold 9900 (which has the accelerometer, but has no landscape mode).

    We are looking for a solution that doesn't invlove by manually checking the models...

    Thanks in advance!

    You can use the DeviceCapability.isRotationSupported method to determine this.  This class has been added in BlackBerry Device Software version 6.0.

  • How to determine if an exe has been installed?

    Gurus:

    I have Windows 7 and Norton-Anti-anti-virus/firewall.

    I came across a strange pop-up message when I logged in to my computer today. A pop-up window, said that "do you want to install \SYSWOW\MAClean.exe (not sure the path or the name of the exe)? While I was doing research on it using another computer, he disappeared. What is one-sided, I don't think any exe with MA*.exe in the computer. My computer also seems to be suspended during indexing - it connects normally - no delay - if I remove the wireless connection. other times, he connects very well, even with the wireless connection is ON.

    My questions are:-

    (1) how to determine if an exe has been installed ("I see not all facilities in uninstall it or change of program" window in the control panel)?

    (2) is it possible to list out all messages 'Alerts' or 'Popup' that appears on the screen?

    Best regards

    San

    HI San,

    Thanks for posting your question on the Forum of the Microsoft community.

    This can happen if the corresponding .exe file is associated with a program that is installed on your computer. To check the instance of the file, you can check in the list of programs and features in Control Panel. Apart from this, it can be due to an infection by the virus.

    To know different alerts and notifications, you can open the Action Center in Windows and check important notifications or the needs of Windows to accomplish tasks. To do this, please refer to the following location: Start > Control Panel (see: large icons) > Action Center.

    Also, you can also check error messages in the event viewer for more information.

    (Click Start, type Event Viewer in the Start Search and press ENTER.)

    To check the program third party or service by giving pop-ups/alerts, you can start the computer in a selective startup with no third-party software in operation. This process is known as a clean boot.

    How to perform a clean boot in Windows
    http://support.Microsoft.com/kb/929135

    Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

    In addition, if your computer hangs or crashes often, I suggest you to try the steps from the following link.

    8.1 Windows, Windows 8 or Windows 7 hangs or freezes

    http://support.Microsoft.com/kb/2681286/en-us

    Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this information is useful. Please post for any further assistance.

  • Manual large editions with sensitive html setting. Is there a way to determine how the entries appear in the table of contents?

    I publish major textbooks with sensitive html setting. Is there a way to determine how the entries appear in the table of contents? If I publish a small section of the manual then 2nd level entries appear as eruptions under the chapter name, but if I publish the manual in its entirety then level 2 headings are not at all. I would like them to appear as the eruptions in the table of contents, but I need to publish the manual as a whole in order to keep the cross references. Any help will be greatly appreciated!

    I think that this would make clearer - and it would skip and tables of contents of books under.

  • I need to start using the color correction. Should I start by Lumetri, or go directly to SpeedGrade and save time?

    I need to start using the color correction. Should I start by Lumetri, or go directly to SpeedGrade and save time?

    Lumetri Panel/workspace in PrPro is designed as a quick Fixer & able to mainly simple elements you may need to. And it has some limitations so built-in types experienced low editor/colorist can't screw up at all times of their videos. If this tool has everything you need, so it is very convenient. You do not need to learn a lot of ranking 'thought process', just look at your scopes & your program monitor.

    If, however, you'll need to tell secondaries 'Key' on some shades at certain levels of brightness/saturation to change just THE color, hue, brightness, saturation data, or a number of other things more important to the image, then SpeedGrade would be necessary. For me, I use the Lumetri Panel on the simple things, but... as Jim pointed out, if I want to hit secondary or make major changes, I'm more the Sg. Because after I learned that the app rather... unique... minimalist... UI, I'm actually able to move quicker on things over there than in the Lumetri Panel.

    SpeedGrade is not the same as applications other colorist/ranking, didn't say the vast-toolset of determination... but link Direct saves a TON to prepare sequences & projects on XML/EDL out and return & tel. If you go to work with her, I suggest strongly to e-book by Alexis Van Hurkman "Adobe SpeedGrade."... Getting started» It is still CS6... BUT... It covers quickly and directly how SpeedGrade works and how to do things you want to do, better than anything else I've seen. The big change is in the CC versions using the Direct link that you don't have any EDL input/output, and as all the scenario changes you make through PrPro, both the chronology controllling/replacement parts of Sg is grayed out in a project of direct link (directly using a project file PrPro). The interface... different color... is almost identical to the versions CS6.

    In addition, there are some good programs on service tutorial lynda-dot-com, and some that are quite useful on SpeedGrade in AdobeTV that will give you the look more recent Sg and Di-link process. Maybe you spend a few hours in watching & playing around, but once you get this thing is pretty easy to use.

    I do not recommend having a ramp... a block of neutral gray tones will generally from left to right black (0) to white (100) that you can put on a timeline, see to the Sg, and then look at what is happening where when you change what... so that you get a feel for say overall "initial" three color wheels/luma sliders , which left elevator control, controls gain way Gamma and right hand do... and you need to see that the elevator is * not * the shadows... and then, when you change moves on the shadows, mediums and highlights and always looking three combos of luma/color controls, now what region they change? What control on how these controls affect the image data pivot controls provide?

    It sounds more complicated than it needs to use, really... you just can't guess what they are doing and being puzzled at the first/frustrated when things do not respond as you expect. A few graphics and several simple explanations & examples... and you'll be off and running.

    Neil

Maybe you are looking for