HP Pavilion g6-1322se Notebook: [SOLVED] cannot find/install the appropriate network controller driver

Hello

I installed Windows 7 64 bit as a SECOND OS on my laptop, everything goes very well with Windows 10 a.

On Windows 7, the Netowrk controller driver is missing and I can not connect to Internet via Wifi.

I manage to find a suitable driver for my network controller (don't know if it's Broadcom and Realtek).

I tried to install a large number of them, and finally, it fails with the error:

["0" error and the installation program cannot contiune]

Product name:

Laptop HP Pavilion G6-1322se

Hardware ID:

PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01
PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C
PCI\VEN_14E4 & DEV_4727 & CC_028000
PCI\VEN_14E4 & DEV_4727 & CC_0280

Any suggestions?

Concerning

Advertisement

Hello world

I found a solution for this. I downloaded the driver appropriate from this link:

http://support.HP.com/my-en/drivers/selfservice/swdetails/HP-Pavilion-G6-1300-notebook-PC-series/5186808/model/5218300/swItemId/ob-95652-2

After extraction, it will start the installation, and the error appears again. Nevertheless, follow these steps after the error:

1. Locate the file extraction. [You can see address during extraction after clicking on the downloaded file.]

2. go to the Device Manager, right-click on the network controller and click Update driver software.

3. choose to do it manually. Find the folder of extraction [I mentioned earlier].

4. made!

* Do not forget that, in order to get the best driver, you should IDENTIFY YOUR PRODUCTS AUTOMATICALLY by the HP Web site and then go to its pilots!

Concerning

Tags: Notebooks

Similar Questions

  • HP Pavilion 17 j7b57av: need of repair to install the memory and hard drive

    How can I access my memory and hard drive to add memory and upgrade to a larger disk?  I do not see on the bottom cover access ports, which suggests low overall coverage needs to be removed, but there is always something that is in the manual of th, and I can't find a service manual.

    Please click the links provided which might come handy below

    http://h10032.www1.HP.com/CTG/manual/c04402649

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the white button on the right to say thank you Thumbs Up *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • Cannot re - install the Intel HD Graphics driver

    We have a G72-B66US and started having a BSOD of igdkmd64.sys yesterday morning when running the Sims 3.  As part of troubleshooting, I wanted to reinstall the graphics driver since nothing else has changed since the previous day when it was working fine.  I found HD mistakes and that you have updated the BIOS re-installed the Sims 3, etc.

    On the hp.com website, the latest driver is version 8.15.10.2189.  I downloaded from the site hp.com as sp51914 but when I run it I get "the pilot is not validated for this computer.  You can get the correct driver from the manufacturer of the computer. »

    Older drivers show the same version with .sp50872, but I get the same message "not validated" during installation.

    Graphics options show that 8.15.10.2189 is the correct driver version and I'm getting it to the right on the site of hp model.  The only other oddity is that the "programs and features" control panel shows version 8.15.10.2131 for 'Intel HD Graphics Driver.  I don't want to uninstall knowing I can't reinstall.

    Any ideas?  Help!

    Thank you!

    Hello:

    See if the driver Intel Intel's works. Sometimes, it does.

    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3231&DwnldID=21776&ProductFamily=Graphics&ProductLine=Laptop+graphics+drivers&ProductProduct=Intel%c2%ae+Core%e2%84%a2+Processors+with+Intel%c2%ae+HD+Graphics&lang=eng

  • WinXP not reading USB floppy during installation (F6). Cannot install the ACHI storage controller driver.

    I bought a 3000 N200 with Win Vista Basic. His is not illegigble for a decommissioning of the plant, but apparently it's possible.

    At the beginning of the XP installation after you press F6, everything seems very well, that the floppy drive is read I can select the appropriate driver and program installation continues...  Drunk when the installer is ready to copy files to the hard drive, Setup stops and asks the "Intel Matrix Storage Manager" diskette in the A: drive.    The thing is that the drive is still in the floppy drive. It's as if the USB floppy drive is not connected.  What's wrong?

    I've done the disk several times different. I unplug it and re - insert the USB key.

    I can't disable the ACHI and run the XP installation very well, but the ACPI driver (or something like that) is installed.  Later, during the loading of software the program WinDVD from the Lenovo Web site does not recognize the manufacturer and stops.

    Help, please...

    nLite is my Savior. I've not finished installation, but once the installation program only is complaint not only no hard drive was present, I think that I am free to hone. I just included the AHCI driver in nLite with the chipset drivers and it seems to work...

    Later I'll post the final verdict...

  • HP Pavilion g6t - 1 d 00: cannot find the Ethernet drivers

    I have a HP Pavilion g6t - 1 d 00 Mobile (product #-A1J17AV;) Series # 5CG217015R) with Windows 7. The operating system has crashed so I reinstalled a fresh copy of Windows 7 (64-bit) on my computer.

    The HP support site is not all the drivers for the Ethernet wired network adater. The Device Manager has the Ethernet controller, PCI Device, network controller and peripheral other SM Bus controller listed under, and he says there is no driver installed for these devices.

    In addition, all the other drivers on the HP support site are for Windows 8, nothing for windows 7. I tried to install the wireless broadcom and intel drivers (I don't know which one I have), but they no longer work.

    Could you please tell me where I can get the correct drivers?

    Thank you.

    Neel

    Hello:

    Here are the drivers you need for the:

    SM Bus controller: Install first this driver and restart the PC.

    This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

    File name: sp55095.exe

    Ethernet controller:

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp55040.exe

    PCI device:

    This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

    File name: sp55038.exe

    Since your computer laptop is a CTO model, there may be several different model wireless cards which might have been installed on your PC.

    Please view the ID of the hardware for the network controller (which is the wireless card needing a driver).

    To find the hardware ID, click on the network controller device in Device Manager.

    Then click on the Details tab in the upper part of the window network controller.

    Now you will see a drop-down list of property, and it will be set to the Description of the unit.

    On this list and select the item at the 2nd (hardware ID).

    After the first string of characters you see in the window.

    Also, here is the link to the page of the W7 driver for your laptop.  It has all the drivers and the software you need except for the controller driver smbus I have a template with similar equipment.

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-1D00-notebook-PC-series/5186811/model/5214422

  • I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do

    new hard drive

    I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do thanks in advance

    How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
    http://www.PAGESTART.com/acronisnewharddrive01.html

    The same technique should also work for Vista.

    Note: Acronis now sells their 2012 for the UI version may be slightly different.

    J W Stuart: http://www.pagestart.com

  • Because my father died, he left his phone with us. ID or pword is available and now its blocked. Can I reuse and reset or do I throw? Cannot find even the purchase of documents.

    Because my father died, he left his phone with us. ID or pword is available and now its blocked. Can I reuse and reset or do I throw? Cannot find even the purchase of documents.

    If you are unable to prove original owner Apple cannot help you.

  • RT: Remote desktop says "cannot find a device suitable for C drive.

    Hello

    There is a french position on exactly the same topic, but I can't apply the solution given here.

    My problem is this: I have a remote, ready to work as a target RT Office. It has been verified for compatibility, the hard drive has been formatted to FAT32, it was found by my host and received a static ip address. I installed the software, I need (LabView RT 9.0) using MAX. Now, when I try to boot with the option 'start using software installed on your hard drive', all I get is the message

    "Cannot find a device suitable for C drive.

    I have reset the BIOS, tried to format the drive hard in the other format, uninstalled and reinstalled the software, tried to start the pc target without the USB, but nothing seems to work.

    You have ideas on what goes wrong?

    Thank you

    Samuel

    Have you tried changing the settings of the BIOS for the hard disk controller?

    There could be different modes available.

    Refer to the hard drive of this document: http://zone.ni.com/devzone/cda/tut/p/id/8239?OpenDocument

  • Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all the other programs of cloud of 2015 but not PP2015.

    Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all programs of cloud 2015 but not PP2015. When I got this error, I had a mid-2012 Mac Pro running El Capitan 10.11.2 and an Apple ATI Radeon HD5770.  You can't update the drivers with Apple, but El Capitan should have giving me the latest video drivers.

    First try to open but after loading everything it errored out with the "can't find a video playback device adapted." A very cryptic message in my way of thinking. They mean the monitor, video card or what?  In any case, I decided that I must have my video card, so I bought a 4 GB Nvidia GTX 970 MacCards.com card, put it in and got the latest drivers for it, than MacCards.com current guard.  This resulted in no gain. Always the same result right along with the exact error even after loading the PP2015.

    I reinstalled PPCC2015 yesterday and it still loads but never opens and gives me the same error.  I feel like even if I bought a new MacPro and reloaded all software CC, I'd still have the same result. Very depressed of not being able to run the software I pay for every month.

    In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.

    In this folder, go to preferences and find the adobe folder.

    Right-click on the adobe folder and click get info.

    In the permissions section, & sharing, there are three names.

    Everyone should say read & write beside them.

    Open the lock, turn all to read and write.

    Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

    Then relock the lock.

    Now, go to your OS hard drive and click on users, your user name, Documents.

    Find the adobe folder there.

    Right-click on the adobe folder and click get info.

    In the permissions section, & sharing, there are three names.

    Everyone should say read & write beside them.

    Open the lock, turn all to read and write.

    Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

    The lock, the lock again.

    Wait a minute. Then launch first.

    This fixed it for me.

  • HP 15 Notebook PC: Not installed network controller driver

    Sister network controller driver seems to have 'uninstalled itself." I can't find the right one, so if anyone can send me in the right direction, I'd be very happy. Here's the info you need to make sure that it is correct.

    Product name: HP 15 Notebook PC

    Product number: J8A22UA #ABA

    The network controller properties > details > hardware IDs

    PCI\VEN_0300 & DEV_8301 & SUBSYS_817910EC & REV_01

    PCI\VEN_0300 & DEV_8301 & SUBSYS_817910EC

    PCI\VEN_0300 & DEV_8301 & CC_028000

    PCI\VEN_0300 & DEV_8301 & CC_0280

    Thank you very much for your help!

    Hello:

    The list of the parts for this model indicates that it is a Realtek RTL8188EE 802.11bg / n 1 x 1 WiFi adapter.

    http://PartSurfer.HP.com/search.aspx?SearchText=J8A22UA

    I have no idea what the ID, but it is not the card Realtek 8188.

    When I googled the ID, I can't find a thing.

    So if uninstalled the driver for the wireless card, try this one.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140310-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0020

  • Wireless network adapter cannot connect to the wireless network

    When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

    Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • Pavilion 15-ab063tx: 15-ab063tx Pavilion network controller driver problem

    Hello

    I just bought a new 15-ab063tx Pavilion and after format, I have a wireless network connection problem. For the network local network it works well but I can't find the wireless network adapter. On the device he received the error this network controller driver problem. Can someone help me.

    Realtek Wireless:

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4158

    Bluetooth:

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_147638_1&swEnvOid=4158

  • This product cannot be installed on a domain controller

    Help, please

    When to start installing custom of the VMware vCenter vCenter/Server Single Sign-On on a virtual machine (Windows Server 2012 Standard) get the following message "this product cannot be installed on a domain controller".


    LAB scenario:

    VMWare Fusion Pro 6.0.3

    • Windows Server 2012 Standard
    • SQL Server 2014

    Advice means if you had encountered this problem before and how you solved it.

    Concerning

    Thanks for the info Tim.

    I have already completed the installation on a new virtual machine without Active Directory is installed, and now I can continue with the installation.

    Concerning

  • Moved the folder "Pictures" of Mac and catalog image files shows no images. Cannot navigate to the appropriate folder in 'Files' Panel and cannot rename the folder "Images". How can I reconnect catalog image files?

    Moved the folder "Pictures" of Mac and catalog image files shows no images. Cannot navigate to the appropriate folder in 'Files' Panel and cannot rename the folder "Images". How can I reconnect catalog image files?

    You opened an empty catalog.

    You can try the following two steps to open the appropriate catalog file.

    1. Use the file-> open recent, open the list of all catalogs
    2. If this does not work, you will need to find the appropriate help for your operating system catalog file and double-click it to open it.
  • I can´t find the network controller driver. Is Hp 2000 - 2d09EE, 8 x 64 windows. Please can you help me?

    Hello

    I can´t find the network controller driver. Is Hp 2000 - 2d09EE, 8 x 64 windows. Please can you help me?

    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
    PCI\VEN_168C & DEV_0036 & CC_028000
    PCI\VEN_168C & DEV_0036 & CC_0280

    Direct link is here

    http://ftp.HP.com/pub/SoftPaq/sp62001-62500/sp62425.exe

Maybe you are looking for