HP Pavilion g6 crashes / slow down when it is not plugged.
When I use with connected PC, it works better. But when it's not plugged in it slow down the system and web apps... also videos and audio players crashes. I tried changing the 'power options' and many changes of performance better. But until it improves not... Please help.
HP pavilion g6
Win7 HB, (i5)
Radeon 1 GB graphics card
Thanks for sharing this information. Here's an update of bios newer for your system, please install it. When asked of run you or save, please save the file first, then run it. Have also the power adapter is plugged in the process.
This link here will provide you with a lot of other task that you can use to help your situation.
If I was helpful, or if you want to say thanks you can click the White Star under my name to give me congratulations. I really appreciate it.
Please answer as soon as possible.
My wi - fi connection slows down when the charger is not plugged in. Correct the wireless lan drivers. So far, I appreciate all kinds of advice for this problem.
Thanks in advance
Welcome to the HP support community! I read your post and wanted to tender hand can help you!
I understand that you notice a decrease in speed wireless on the x 360-15-w100nt laptop computer ENVY when running off the battery voltage.
You can check and adjust the power options on the system as it is probably trying to save battery power by reducing wireless performance.
If you're still having problems, you can follow the steps described in this document to troubleshoot the network settings and internet wireless.
Please get back to me how that happens. To show that you like, or are grateful for my post, please click the Thumbs up below.
Sometimes my Vaio Duo 13 lights when it is not plugged in. I can plug in and it will activate immediately and then unplug the unit for use. Battery is fully charged.
OK, the battery is fully charged and the computer is not responding, until what I plug in the AC adapter, then is starts fine. I can unplug the unit immediately after and it works fine on battery
After FF4 update, I find that whenever I try to open a page that has several on this animated gifs, firefox slows down a lot. The CPU usage goes up to 50-75% and all animated gifs are moving really slow.
It is not only large animated gifs, but it occurs also on the forums that have animated smileys. I never had this problem in FF 3.6 neither another browser (IE, Chrome, Safari). If I start FF4.0 without modules or plugins it does the same thing. Even with a new facility. Does anyone have a solution to his problem? Since I can't use some of my favorite now with FF sites, without my pc slow everything down.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).
- Makes no changes on the start safe mode window.
Safe mode disables extensions in Firefox 4, and disables hardware acceleration.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
OK, so here is the problem I have do this output pid controller is between 0-100 in this program, I'm just trying to make it work so I made a function to compare that when the controller output is 0 and the constant 0 I'm starting a business loop which transform the output for a second and turn off for a second. When I go into the structure of the case, the rest of my program slows down
I don't know why, I tried to do a while loop and a structure outside my main loop but I can't get my signal of my statement to compare to enter the second loop where I get my output to bike in 1 second intervals
This is the VI please help
I'm still learning how to use labview in passing
The next thing you want to learn more about LabVIEW dataflow. This is the fundamental paradigm of LV and explain your slowdown problems.
The basic concept of data flow is any node (node = function, Subvi, structure) can begin to run when the data is present on all its entries and no data will be present at its outputs to execution comopletes of knot.
How will this affect your VI? The real deal has a wait 1000 ms (actually two, one in each case of the internal structure of the housing = redundant code). The structure of the case will not complete execution until the wait ends. And the while loop does not complete its repetition until the end of the structure of the case. The result: at the exit of the PID.vi = 0, the loop runs at 1 second per iteration.
What is the solution? Continue execution of the loop at intervals of 100 ms. sure in the structure of matter (true case) and another register to shift of how number of intervals of 100 ms is passed. When the count reaches ten, toggle the output line. Do not use the 1000 ms of waiting.
All the code in your internal structure is not necessary. Connect the output remains directly to the digital Arduino write VI.
Be careful with the comparison to zero with floating point data. If the calculation which produces data has round off errors you could get a value such as 0.573E - 15, but which is not equal to zero. It is better to compare to a small range of values above and below zero.
Right to left wiring is much easier to follow in trying to understand what makes a program. Using the tool to clean occasionally will help (although he eventually frustrate you also).
When Facebook games like war command my computer slows down. I don't have any other applications running, sometimes I get a message saying that to appear this program using the amount of memory and I have to close and restart
1. what version of Windows is installed on the computer?
2. in the browser that you play Facebook games?
3. What is the full error message?
4 is about the limit for the Facebook games?
5 is this a connection wired or wireless?
6 have have there been recent changes made on the computer before the show?
I suggest you run the troubleshooter of performance on the system and verify.
Open the troubleshooter of Performance
Method 2: Follow the steps in the following article and check if it helps.
Note: Please proceed if you use internet explore for playing games.
The problems of games online using Internet Explorer
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
If the steps above did not fix the problem, please provide me with the required information so that we can help you accordingly.
I have problems with my installation of Photoshop CS6 extended 13.0. I have a large collection of fonts (more than 9000 - no joke) and Photoshop slows down bad whenever I do something that requires the use of the fonts/typing/text handling. I tried to disable the font previews. Photoshop is still too slow. I foundand have additional questions about my situation:
- Is there a way to mitigate the slowdown in Photoshop when something related to fonts?
- Will be updated to the latest version of CS6 help? I should even try to update?
- I have to reduce the number of fonts activated? If so, what is a good number to aim for?
- Any advice on the management of fonts? The thread mentions Typekit - I do not have a full subscription to CC. Other tools of management of good police (preferably free) that you can recommend?
Any help is greatly appreciated.
9000 fonts? How many people have you used last year?
Not really sure what to tell you. Using a lot of fonts is a serious drain on system resources. How long does Photoshop take to open? Some time I think.
TypeKit used to be a wonderful resource, but it has become very limited, if you only plan to photograph, and it would do precisely nothing to the management of your 9000 fonts. Not a garbage.
I used TypeDNA for awhile and well liked.
I have a Mini for 18 months, 210.1155DX. It had worked fine until recently, when he slowed down incredibly, he came to the point where I can't use it when it's charging as it slows down and freezes so. Generally when it is running only on battery power, it is ok, but sometimes there are problems with Skype, etc., with voices sounding robotic that it runs very slowly.
I took it to different COMPUTER technicians and they are all confused. I hope someone can help!
Hello, to start things out of what are your power options on? If you look under control panel, power options and check to see if it is set to high performance. Also, I included a link to the documentation which may be useful.
It is a continuation of a discussion dated dated August 21, 2011 16:26 with suggestions of Bill Gehrke and John Smith, who has recommended how I could speed up edition and made my PC i7 and suggestions to solve the slow response of the mouse .
After that several clicks of the mouse, the first quick reactions from first Pro CS5 are starting to slow down to a crawl.
-ASUS P6TWS Professional Motherboard
-Intel Core i7 920 CPU
-12 GB OF DDR3 1333 RAM
-4 HD 1 TB
-Video card ATI RADEON 4670 1
-Coolermaster 690 case separate real power 700W
-LG BlueRay writer
-Microsoft Wireless Laser Keyboard 6000 v2.0
-Microsoft Wireless Laser Mouse 6000
- Disable indexing on your hard drives.
- Try wired keyboard and mouse (old style, no USB) with the generic driver for Win7.
- Try disabling the two security programs.
- Do not use boot drive for what anyone (editing wise) but the OS and applications. Sale video project and media on another quick of HDD or a table.
- Try another (more recent AND older) driver for your ATI card.
Status of the above numbered items:
- Indexing is disabled on all drives used for video editing.
- The Asus P6T WS Pro motherboard has a combo keyboard and mouse PS2 Connector. I was trying to use an old PS2 Keyboard and mouse PS2 to replace the Microsoft wireless keyboard/mouse. This would require a PS2 PS2 male/2 female adapter. Information on the Internet shows that there is 2 pins to spare on a standard PS2. These 2 spare pins are used on connectors PS2 combo for the mouse clock and data which I assume is the case for the ASUS motherboard. This requires a special adapter where regular clock pins and the date the female to PS2 Keyboard and pins of alternatives to the female to PS2 Mouse. I couldn't so far find such an adapter.
- I need to use the Internet for updates of program so I would disconnect the LAN to disable security for the trial. If security is the issue, I guess it would be to disconnect the LAN and disabling security whenever I'm editing video.
- I have 1 TB disks 3 other than the boot drive, one for each video source, audio source and output rendered. I think that the reader audio source would be best to share with the project file because the audio files are not as demanding on the CPU if treated earlier in Soundbooth.
- I'll try different drivers.
As recommended, the first Pro Benchmark I ran against my i7 PC to conclude that performance was close to the other similarly configured PCs. This confirms that I am dealing with problems of the outdoor unit. In this case, the interaction of the mouse when editing is the likely suspect. I'll try a second run after the changes. I don't know how the files originate in the testbed among my 4 hard drives so that the results may not indicate a better distribution of readers.
Does anyone can tell where I can get a combo reliable adapter PS2? Do not share the drive audio source with the project file a better choice than the readers of rendered files or video source?
> solved by replacing the laser mouse with a PS2 Mouse Wireless
Just guessing here... but my 'better thinking' is that your problem is not the material of the mouse, but the the mouse software that created the wireless link was not totally compatible with 'something' in Adobe software
Another option could be a USB mouse
Query below seems to work at least + 30 seconds, I don't know how long it works:
SELECT t.Owner, t.Table_Name, c.Comments, f.Column_Name, Fc.Comments FROM All_Tables t, All_Tab_Comments c, All_Tab_Columns f, All_Col_Comments Fc WHERE c.Table_Name = t.Table_Name AND f.Owner = t.Owner AND f.Table_Name = c.Table_Name AND Fc.Owner = f.Owner AND Fc.Table_Name = f.Table_Name AND Fc.Column_Name = f.Column_Name AND t.Owner IN ('CASINO') AND t.Table_Name IN ('PHYSICALTABLEGROUPS') ORDER BY t.Owner, t.Table_Name, f.Column_Name;
As you can see the only difference is with 'IN' operator. Adding more item in the request list will slow down. Why is it slow?
SELECT t.Owner, t.Table_Name, c.Comments, f.Column_Name, Fc.Comments FROM All_Tables t, All_Tab_Comments c, All_Tab_Columns f, All_Col_Comments Fc WHERE c.Table_Name = t.Table_Name AND f.Owner = t.Owner AND f.Table_Name = c.Table_Name AND Fc.Owner = f.Owner AND Fc.Table_Name = f.Table_Name AND Fc.Column_Name = f.Column_Name AND t.Owner IN ('CASINO') AND t.Table_Name IN ('ADMINS', 'PHYSICALTABLEGROUPS') ORDER BY t.Owner, t.Table_Name, f.Column_Name;
I have no privileges to run explain plan for this query, because I do not have certain privileges, I think for these system objects.
Can you explain why the request will slow down with the addition of a table over in the list.
I found the / * + ALL_ROWS * / tip to be useful on SQL join views great dictionary, including DBA_TAB_PARTITIONS and DBA_TAB_COLUMNS, that can develop enough long.
I have a Samsung NC10 that I bought in 2008 and the problem I've had for a week, it is that my screen is fine when the laptop is plugged in but fades when not plugged in - it ' s like going to a brightly lit room, in a room where the lights are dimmed... What can I do to remedy this? My battery runs down? Can I us my laptop plugged it my battery die? I must admit that I left basically still my laptop plugged...
Check the settings of the display under battery power and adjust accordingly - How to adjust the brightness of the screen under Windows XP.
I have a wired connection to my laptop and you have a problem a week that my internet is slow. So I called my ISP and told them on this subject. My ISP says my connection is under FUP (Fair Use Policy - down internet speed when you reach the maximum bandwidth provided by your ISP in the months. - ONLY in the PHILIPPINES that is really annoying and disturbing) anyway, so I tried to stop using my wired connection to date and use the Wi - Fi connection. It went well, I have a fast connection again. And then I tried to connect again to a wired connection that is different from my own wired connection, it is connected to a PC and have a good connection speed. So I connect it to my laptop and expect that it has good connection to check if there are updates in my system. Surprisingly, the internet connection on my laptop was really very slow. I tried to check internet speed using Speedtest and 0.17 to 0.20 Mbps operation. So I removed again and again on the PC. When I checked the speed of connection on the PC, it gives me more than 3 Mbps.
That's what I've done so far:
Update drivers / windows
Active mac address / changed
and finally tried to reformat and it seems not working do not and have the same problem.
I have LENOVO IdeaPad S400 Touch with Windows 8 on it.
What seems to be the problem?
Yes, it's maybe a problem with the network card. I suggest you to contact the manufacturer of the laptop to get help on this issue.
Please let us know if you have more queries on Windows.
I have a HP Pavilion 502 and it's slow. Memory has been upgraded to at least 256 MB and everything works it is MS Office, software, Verizon, Firefox, HP all-in-one, KMP Player, Teamviewer, iTunes and just removed the old anti-virus program and installed Panda anti-virus (recommeded CNET, it's cloud software). I tried some software and nothing seems to work and I had bad-ware but it was deleted.
Thanks for the help.
Here is a list of things to try if your PC is slow:
- Download cookienator (it's a gift) and clean the House.
- Open my computer and right mouse click the hard drive--> properties--> disk cleanup
- Start Internet Explorer Tools Internet Options-->-->--> delete browsing history
- Open my computer and right mouse click on the hard drive-->-->--> Defrag tools properties now
- Open the RUN and enter the following command: chkdsk
- Open my computer and right mouse click the hard drive--> properties--> tools--> Check now
- Open the RUN and enter the following commands:
sfc / scannow---> it will check your critical system files and try to fix
Restart and see how things are going.
You have some pretty old PC so some of the above may not work. Your PC can be upgraded to 512 MB, which is not quite given the recent PCs have at least 2 GB. It is time to move to a newer PC?
Original title: slow internet
When I play games on fb that they load very well at first, but the longer I stay on the slower, they run like molasses. I also notice the fillings of the ith in 30 minutes... file cache need to use cc cleaner to clean. for example: 20 minutes of game 1 game and I 451 filled files with more than 10000 mbs.
· What web browser do you use to play games on Facebook?
· The problem only occurs on Facebook?
If you are facing this problem on Internet Explorer, then I suggest you to follow the steps in this Microsoft KB article troubleshooting and check if it helps.
The problems of games online using Internet Explorer
My computer works fine except when I try to open the control panel. Then windows explore crashes, my mouse is useless and impossible to close the control panel by using the menu of the task. Everything disappears when I managed to select restart windows Explorer and the closed control panel. I have seen a lot of messages from people having the same problem but I still see a response that it heals. Microsoft want money to repair their fault and I'm not ready to feed their greed. If anyone else can help?
What antivirus/antispyware/security products you have on your machine? Include everything you
ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
Search all .cpl files most will be in "C:\Windows\System32" However, you can have
others. Click on each of them at a time and see if it does not start - if so right click on it and
Rename it using cpZ as the extension is easy to find. Try Control Panel - if no Dungeon of joy
try all the .cpl files. (Note that other people find other subfolders under C:\Windows should
not be judged because they are not active.)
Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and others.
Try these in case the General corruption has a role to play:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
Icons do not appear in the Control Panel, or you cannot start Control Panel, Windows Welcome, or
Games in Windows Vista
The Control Panel window will not open in Windows Vista
It was reported a updated driver it has blocked, so have you updated drivers
lately? Also check the driver updates in Windows Updates.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
My wife has 'lost' the paperwork on this model and need to know the specifications, can anyone help?
You'll never have any problems with the automatic update of my Vista. 3 days ago, no update occurred. Just search for the new update & C80003FA of Code error received. Please help as soon as possible. Thank you
Dear Sir. I have 32 GB Kingston Pensrive. with this hard drive has a problem, it's that the disk file system is RAW. I ran the icare data recovery software. After the race, he is not rectified. my USB problem is in the raw file system. I used the Ac
I can't do updates, internet Explorer crashes 3 - 4 times a day. Do not now how to fix this problem! Can anyone help please?