HP Pavilion G6 - laptop freezes at the HP splash screen
My laptop HP Pavilion G6 freezes at startup HP and not passed this initial page in windows. I tried pulling the battery, reset several times and ran a quick diagnosis. And after executing a quick diagnosis, she came back with the following error:
Short hard drive DST Check: failure
Fairlure ID: GLM9VR - 6B 8783 - MFPXOK - 60SN03
Any help on what to do next? Does anyone else have this problem?
This means that the hard drive has failed and needs to be replaced. If you did the recovery set when the PC was new, then it is just a matter of execution of recovery after replacing the hard drive. If you have not done the game, they may be available for purchase for a small price ($27US), a more complete model number is required before
Tags: Notebooks
Similar Questions
-
HPG62 laptop freezes as the hp logo screen appears which comes at the start
My HPG62-253UT notebook freezes as the hp logo screen appears just at startup at startup. Have a WIN7 OS
Hello
Try a Hard Reset as follows.
Shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery, connect the AC adapter and see if the laptop boots.
Kind regards
DP - K
-
Pavilion h8 - 1070t: blocked on the HP splash screen, computer beep
I just installed a PSU Corsair CX600 and an EVGA GeForce gt 740.
When I start my PC, is rest on the start screen and beeps once, every ten seconds. After 3 beeps (30 seconds) my PC beeps again followed three quick beeps and the monitor stops receiving signal from the computer (I do not see the HP splash screen, no signal).
What could be the problem?
I think that your problem is that the video card is not compatible with your BIOS. EVGA 700 series cards require UEFI in the motherboard instead of a standard BIOS. I suggest you to contact EVGA Tech Support (1-888-880-3842) to see if they have a VBIOS update that will allow the card to work with your computer. If they do not have an update that they can email it to you. Tell them that someone of the HP Forums suggested that you call.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
HP Pavilion 21-h010la stuck in the HP splash screen.
Hello. I'm having a problem with my computer. When I try to turn it on, it gets stuck in the HP loading screen. I used the PC Hardware Diagnostics UEFI and he says that it meets the test, even if the SMART hard disk check returns a WARNING. The program didn't give me all the instructions to fix it later. Do I need to change?
Hi there @mafi11235,
That the Forums are with you! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer is stuck on the HP logo at the start, and that he was a WELL-INFORMED driver error message. I'm happy to help you with this.
If you get a SMART disk error, so it is normally a warning of impending failure, based on testing the drive runs itself. This could mean the drive is defective or shows signs of failure, but in general you want to replace it and try to make a backup of your data as much as you can, until it was inaccessible.
You have recovery media or already made for Windows 10 recovery disc? If this isn't the case, you will want to get some for your system. Computers HP - get HP recovery disks or HP USB recovery disc
Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.
-
M9452p Pavilion lock, restart the HP splash screen and freezes
My HP Pavillion M9452p primer, I can connect and I ran a program to copy a disc. the system froze, then went through the process of restarting and froze on the splash screen for HP. Rebooted the system by closing doen ran diagnotics and received a message "BIOS4 Boot error, contact the HP support" what dio I need to do to fix this?
Tried system restore and system recovery using the F8 key start, but he did not, it ran very slow and then rebooted to start HP with the F10, Esc, F9 and F11 options and froze both times.
I just replace the HD two months ago, and it works very well. I just removed all the component and repluged everythignback to gether, ran diagnotics and everything that happened, but still have the same problem with freezing and restarting the HP splash screen.
Motherboard?
Mounted with different lock forum, freezing, etc.
-
My Gateway FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes. OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.
Problem solved! An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.
The good part? Vaced out all the dust and replace the bios battery. [I'm good for at least another 2 years;-]
-
Satellite P300 itself keeps restarting after the initial splash screen.
My Satellite P300 itself keeps restarting after the initial splash screen.
Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.
That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.
Any help or advice would be much appreciated.
Post edited by: aic-poppy
Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
To start the laptop in safe mode and let us know if it works, try it please. -
T400 suddenly won't boot beyond the ThinkPad splash screen
.. .only visible indicator of a problem is that the drive activity light on the bottom of the screen stops ignition etc when the ThinkPad splash screen appears. No bumps in the system, no unusual activity to suggest physical damage to computer laptop or disk - started very well in the morning on the desk, would not restart from the same location on the office after lunch. System also won't start on a bootable system disk (but you can hear the drive access). System is less than one year.
I solved my problem: Lenovo Service Center for repair under warranty here a diagnosis nor a bad mother and a bad battery, due to abuse of the handling, etc. the computer could suffer (it seemed to be a factory default). No indication as to whether one or the other 'bad' component caused the other to fail. in total 48 hrs to repair, most of the waiting time for a new motherboard coming in the night. No charge to me for what it is. Life goes on.
-
So I call the Offline processing Utility (ORPU) a not executable call results in a plugin to perform a personalised treatment in another configuration. Everything works fine, including having run reduced (mostly hidden) by using the option/tray. When he called, the TestStand splash screen appears (certainly is not a show-stopper but it's confusing from the point of view of the user).
Is it possible that I can get this start screen to not appear when calling the ORPU? I noticed in the help, mention is made of the use of the callback file, and I wonder if someone has successfully used this to avoid the dialog box or other behaviors. I would like more info on how it works, but it doesn't seem to be a vast detail on this in the help, and I'm not also find me useful examples.
The source of the Offline utility treatment results is included with TestStand and can be changed.
The ORPU source is located under "
Components\Models\TestStandModels\Offline utility treatment results" From the source, you can see that there is no flag that allows you to hide the splash screen (except for / I leave, but that it will also close the ORPU!); However, you can easily change the ORPU so it does not show the start screen by removing the following lines in
\Components\Models\TestStandModels\Offline Results Processing Utility\OfflineResultsProcessingUtility\MainForm.cs If (! data.) Quit smoking)
splashScreenForm = new SplashScreen (mEngine, false);Regarding the flags without papers, there are not really many flags undocumented in the ORPU (even once, you can see them in the source), and undocumented flags have very specific use cases (open files from shell and NEITHER internal regression tests).
A (non-official) complete list of indicators ORPU from 2014 TS:
/?
Shows help/ tray
Starts the ORPU in the status bar/ exit-when-done
Exits when all files are made/ I'm leaving
Leave immediately/process - files - Missing - Data
Treats the files even if they lack of data/ which-process-files-Missing-Data
Do not process files that are missing data, show only a mistake (it is the default behavior)./ Process-All-Profiles
Start all profiles/ Process-No.-Profiles
Don't start any profile/ Process-Profiles
Treat the profiles specified in the following arguments/ process-files
Add the files specified for the specified profile/ log - level
Sets the logging level for the newspaper ORPU, all of the messages above, the specified log level is saved.
/ShellOpen
It is an internal indicator, it is used to treat applications for the shell (for example, after a double click on a tsr in Windows Explorer). Do not use this indicator./ non-interactive
It is an internal indicator used for the test. Do not use this indicator.Please note that NEITHER does not support appellant flags undocumented and that NEITHER is not guaranteeing backward compatibility of these flags undocumented and they could change at any time, without warning.
For a more detailed explanation of the working of each option, refer to the Arguments of the command line Utility using TestStand treatment results offline.
Hope this helps,
Francisco
-
HP Pavilion 15 laptop: what is the maximum capacity of the HP Pavilion 15 laptop RAM
I have 2 GB of RAM. I want to increse my RAM PC what is the CF max of RAM on my PC
Product name: HP Pavilion 15 laptop
Product number: F0C25PA #ACJ
Hello
Your machine is a "HP Pavilion 15-e024tu" which has 2 slots available to the user:
http://support.HP.com/us-en/document/c03921877
and its supports (#4 manual page)
Support for dual channel DDR3L (1600 MHz)
Support 8192 MB RAM system in the following configurations:
● 8192 MB (8192 MB × 1, × 4096 MB 2)
● 6144 MB (4096 MB + 2048 MB)
● 4096 MB (4096 MB × 1, × 2048 MB 2)
● 2048 MB (2048 MB × 1)Please use the following manual to get more information (type of RAM) and how to replace the RAM:
http://h10032.www1.HP.com/CTG/manual/c03939658
Kind regards.
-
HP Pavilion DV6 laptop: I forgot the password of BIOS on HP Pavilion DV6 PC laptop
Hello
I need to activate the option of virtualization on my HP Pavilion DV6t laptop via the BIOS Setup. When I try to do the same thing it asked me to enter the BIOS password which I forgot unfortuantely. Please help me solve the same and I really appreciate your kind help.
Thank you
With respect,
Saran
Hi Saran,
Enter: 78623197
Kind regards
DP - K
-
Pavilion 7000: Computer freeze once the fan CPU runs at max speed
Product name: Pavilion 7000
Product model: 7 p - 1090d
Product no.: QP177AA #UUF
Operating system: Windows 7 Home Premium 64 - bit version.
Computer blocks once the fan CPU runs at max speed. Initially, the computer would occationally freeze after waking up from sleep mode (CPU fan would be occaionally operate at full speed & freeze the system). Now cannot load even in windows. It freezes at the configuration of the BIOS once the fan turns at speed computer crashes if the CPU fan run at maximum speed wherever you are!
1. I did the cleanning & lubrication & even take the battery to reset the Bios but no success too.
(Before I can reset the Bios it will run normally.)
2. remove all USB devices except the mouse & keyboard
3. detach & attach Ram memory & graphic card
I saw a ROM_Recovery shunt on the motherboard label. Must I do? or can someone help, please?
I sent to the center of HP service after a week, the service staff telling me that he was unable to go bad because my motherboard is the American version, which I have no idea what it means (my PC was purchased locally) but to bring him back.
I solved my problem of tried to detach the Rams (2 actuators) & install only 1 on an another RAM slot first. This works. Then installed the second RAM on an another slot also without no problems so far.
I have an old HP Office also having the location of the faulty RAM & also had replaced graphics card but it raise a peep sound error which easier to identify.
I agree with you more HP, hardware problem is due to RAM or video card. Thanks anyway
-
After starting my hp Pavilion now dv6911om freeze and sometimes during the open page. I have Windows Vista Home Premium 32-bit x. Please help, my first pc and still learning how to use it.
Hello
replacing the motherboard needs to be done in collaboration with the computer manufacturer; in this case HP
When vista is preinstalled as an OEM license and the license of vista is linked to the original motherboard and vista license channels when this computer dies
the original motherboard drivers would be also loaded on vista operating system preinstalled
-
Dv4-2167 freezes on the HP logo screen
My laptop HP DV4-2167sb hangs at the HP logo screen. I tried all the solutions listed on the site of HP (power reset, battery, cmos, memory, others work hard, Flash BIOS, etc.) I tried the official DVD of the HP system recovery (Windows 7 Recovery for Windows 7 media products), but the system crashes and does not start the DVD.
Here's the strange part. If I remove the hard drive I can get into the BIOS.
The laptop only starts linux on a usb key when the hard disk is deleted. Everything works perfectly, while running Linux (monitor, memory, DVD player, etc.).
The laptop only starts from linux CD if there is a bootable USB device attached (i.e. the USB stick with linux, ipod, etc.) Here are the scenarios and messages when errors occur.
Product number: WA688UA #ABA
ID of the system board: 140A
Processor type: Intel® Core™ i3 CPU M330 2.13 GHz
4086MB total memory
Version of the BIOS F.0F
Editor BIOS: Insyde
1) internal hard drive installed in the computer
(2) drive hard internal installed in the computer and bootable CD in the CD drive
(boot order is the CD player, USB, hard drive)3) internal hard drive installed in the computer and the USB bootable stick with Linux Mint on a USB port (boot order is the CD player, USB, hard drive)
It freezes on the HP logo with a message at the bottom of the screen
Press ESC for the Start Menu.
A button does not work because the computer is locked (frozen). It will beep when a key is pressed repeatedly.
(4) internal HDD deleted from the computer and Boot CD in the CD drive
Not found boot device
Please install an operating system on your hard drive
Hard drive (3F0)
F2 System Diagonstics
For more information, please visit: www.hp.com/go/techcenter/startup(5) internal HDD deleted from the computer and the USB Bootable with Linux Mint key on USB port
Correctly at startup the system and everything works great.
(6) internal HDD deleted from the computer and Boot CD USB Stick and CD with Linux Mint on USB port
Boot CD loads and works correctly
Someone has an idea of what could be the problem. I think it may be the hard disk controller, but I do not know how to test for a bad controller.
-James
I finally understood the problem of the drive not being not well. Bezel plastic of the SATA connector in the bottom Bay low.
The SATA connector in the hard drive Bay did not have contact with the pins on the hard drive. It seems that the bottom bezel plastic of the SATA connector in the Bay was small and sagging. That's why he provided enough support for the disk hard so that the connector pins make contact.
I cut a small piece of rigid plastic and inserted into the lower part of the plastic bezel. It has provided support and the pins on the hard disk to make contact with the SATA connector pins.
My hard drive is now recogonized and works perfectly.
-James
-
Satellite L750 - Win7 freeze on the frequently start screen
Hi, my L750 was having this gel on the problem starting frequently in the past few days (almost 2 / 3 times), he just stopped just before the logo windows would load. at first he would continue to run after, I moved the mouse or press a key, but today would not work these tricks.
I have to press the power button to force the reboot and it show a window repair option, I've chosen, then the freeze after the disappearance of process bar (so don't empty screen and nothing, no disc hard processor or light), strength to restart again and it starts okay this time.
No idea what could be the problem here?
We don t know what you are doing with your laptop and what is the configuration of the OS, is not easy to say what can be the problem.
If this problem occurs only a few days, try to start the operating system in safe mode and roll back the BONES of a few days using System Restore tool.
Please test and post comments.
Maybe you are looking for
-
Video and audio problem after upgrade of Sierra.
After that each OS upgrade that I know it's going to be a few problems, so I wasn't surprised when this happened with Sierra. Most have been quickly resolved by common sense, but I have a biggie that remains. Mainly, but not only, it occurs during pl
-
have the apple gift card to convert iTunes
was given an apple gift card, which was designed for use on apple or iTunes store applications, does not need anything, whether in the Apple store have macbook and iPhone. How can I transfer the amount of the donation to itunes
-
After the installation it tells me to update or several search plugins. I have updated JAVA and Silverlight. I had to stop and then restart my computer to test the installation of JAVA. I did it and installation is fine. At this point I had over the
-
If ShareIt can share the files on several receivers at the same time, it will save a lot of time for me when I want to share files with a group of friends.
-
How to make the notification on motorola charm ringtones?
Hi I have a problem once more with my motorola charm. I would like to know how to make a ringtone of notification for when someone texts me. I have just the default notification tones and I don't really like those. Can someone help me?