HP-Pavilion g6 Mute button LED does not

I have a HP Pavilion laptop g6 and I recently discovered that the LED on the button mute does not work, but the key works fine

Help, please!

Thanks in advance

Hello all I had the same problem what I did was just go to (System) then (Device Manager) and then (audio, video and game controllers).
Under there you will find a right click (IDT High Definition Audio CODEC) top and choose Update driver software and select (find the automatically...) MAKE SURE YOU HAVE INTERNET CONNECTION.

This did the job for me, hope it does the same for you.

Tags: Notebooks

Similar Questions

  • MUTE button led does not

    Hello HP, I bought HP Pavilion 15 e015tx operating system windows 8 (64) bits. I upgraded windows 8.1and now my led Silence key does not work. But the mute works well. Please help me. My caps lock led + led wifi works well.

    Hello

    Download and install the driver Realtek HD Audio for Windows 8.1 on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63346.exe

    When the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • HP Envy 4-1026tu Volume Mute button LED does not

    Hello

    For some time now my LED Volume Mute of the [f11] key was not lit. It mutes and restores the sound volume that she doesnot glow. Earlier he used to shine on the Mute [RED] and activate the microphone.

    Product: HP Envy 4-1026tu

    OS: Windows 7 64-bit

    Thank you

    Nishant

    Nishant_Ladiwal,

    I would will direct you to your device manager and check on your current audio drivers.

    1. open the Device Manager, if you do not know how to click on this link

    2. open the sound, video and game controllers

    3. right click on IDT High-Definition

    4 left-click on properties

    5. click on the tab at the top driver

    See what is the current driver if the driver is older that this pilotplease update this driver.

    Also install this HP Quicklaunch softwareas well.

    Please answer as soon as possible.

    Thank you

  • Mute button external does not turn off

    Pavilion dv4 - 1120us - not her although all retired as correct and functional - but mute button external stays on

    Hello

    OK, let's try another driver and a slightly different method.  Download the following Installer and save it on your desktop.

    IDT Audio Installer

    Once download completed, right click on the installer and select "Run as Administrator" to launch the installation - ignore any warnings that you have already installed a driver later, just continue to install it.  When finished, restart the computer and check the status of the IDT audio device in Device Manager and let me know.

    Kind regards

    DP - K

  • MUTE button suddenly does not work

    I have a sl410 with windows 7 Home premium pre-installed and all the multimedia keys worked very well.

    After a few updates (driver lenovo and windows), mute my button does not work.

    Because I use Hibernate instead of shutdown that I can't say precisely what update caused this problem.

    A strange thing is that when I turn off the sound by the control of its use in the system tray, laptop mute button lights! But by pressing the button on the laptop has no effect.

    Lenovo update program says there is no update for me.

    Any suggestions?

    I solved the problem myself, but I don't know how!

    First of all, I used the recovery DVDs to restore windows. I saw "running windows for the first time" and all but the problem was still there. So I tried to downgrade my bios to 1.30 (it was 1.31) but I have found the bios file (thank God!).

    But after a few updates from Lenovo (power management, audio colleague and...) the problem was gone.

    Now everything works.

  • HP Pavilion 11 360: button / stop does not

    I close the laptop and then when I want to open it again the power button works and the system seems to be booting the system. However, when the HP sign disappears the screen becomes black although I can still hear the fan operation. It does not have the beginning, until I press the power button twice. Once to get the start screen flashes and then after the second time the system fills his departure upward and I see the logo of password.

    The boot process will not end until I have go through this rigmarole and rest on a black screen with the fan working away in the background, no matter how long I leave it.

    Anyone know what could be the problem?

    Hi @geom1,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question in the subject of your HP Pavilion 11 x 360 Notebook and problems with the power button works correctly. and the brightness does not properly. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button.
    Figure: 13 choose what the power buttons.

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 8.  Please restart the laptop twice to make sure that all updates are completed!

    Please let me know how it goes.

    You can say thanks for trying to help, by clicking on the Thumbs Up below! .

    Thank you.

  • HP Pavilion 15-e017tx - button Wireless does not work after bios update

    Hello

    I have the HP Pavilion 15-e017tx for the past 8 months.

    Press f12 to this machine is shared by the key wireless button, which was working fine until there was a BIOS update last week.

    Now I try to turn off the wireless using this button it will not respond (light orange).

    I checked the Device Manager, there seems to be a problem with the driver.

    IF you have knowledge of this problem please let me know.

    Thank you

    Hello:

    The update of the BIOS should affect the driver wireless button.

    I would recommend that you reinstall as the unknown device is probably the one.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 5389906 & sw_lang =

  • Qosmio X 870-14 M - mute button FN does not work

    Hello

    I have problem with mute button only, all other works very well. When I push button nothing happens. Funny is that when I close Wifi key first, the key works put on mute for a short time, but that the judgment.

    Please you have any idea how I can solve this problem.

    Hello

    Do you mean the Fn + F11 key combination?
    AFAIK the FN + F11 mutes the sound from the laptop

    Fn + F12 activates and disables the internal Wi - Fi and a Bluetooth module.

    Do you need to press the FN button to use the function key?
    You can configure the key operating mode by selecting the mode of special function or Standard F1 - F12. This would use the function keys with or without the extra FN key-press.

    I also recommend the application of the function of Toshiba key.
    You can find it in Desktop-> Desktop Assistant (in the task bar)-> utility tools & -> Toshiba function key

  • F6 button led does not illuminate

    HP Pavilion Notebook 15-n208tx... .in my laptop keyboard f6 led button lights up, but it works great please hlpp, me

    Please perform the below shown steps as shown below to solve the problem

    Step 01. Turn off the laptop

    Step 02. Disconnect the power/AC adapter and also remove the battery too

    Step 03. Press and hold the power button of the laptop for a minute

    Step 04. Now re - insert the battery back in and plug again the power supply/adapter

    Step 05. Turn on the computer laptop and tapping F10 during boot to enter the BIOS Menu

    Step 06. Please press the F5 key, once to load the default settings in the BIOS of your laptop

    Step 07. Press ESC, save the changes and exit - Yes

    Note: Incase if you still have the same problem after performing these steps, it would be a hardware problem, that I highly recommend to Contact HP Support by phone to get help without delay to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

    You can also check your warranty here to check the status of the guarantee

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

    HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

    The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

    (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

    (2) I tried to change the power adapter too.

    The problem is that it is.

    Your advice is very much appreciated.

    Thank you best regards &,.

    Zia

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    It seems that you are not able to turn on the laptop and tried to solve the problem

    Please perform steps listed to find out if it is a hardware or software problem below:

    1. remove all cables and devices, disconnect them and try to turn on the device

    2. check the LED light situation and ensure the action of the spring button / stop is normal

    3 Exchange with a well known power cord and the AC adapter

    4 Pack no adapters are available, check if the power adaptor is slightly warm

    Note: This will give us an indication that the power adapter could be good

    5. do you know if the laptop was in battery or power adapter when you used the last time

    Note: Make sure that there is no spill of liquid or cutting

    6. check if the Port of the AC adaptor is loose/broken

    Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

    Hope this helps for other queries to answer the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Pavilion Elite m9500y: indicator light does not illuminate

    Start button / stop is pushed to market, the fans begin to turn, but the power button the led does not light (usually blue when on, orange when it is idle), and nothing appears on the monitor (which goes to sleep). Computer is around 3 years. Any ideas?

    Try a reset, works "sometimes". Unplug the appliance, the power button for about 30 seconds. Reconnect the power cord and see if any difference.

  • button / (divide), does not

    button / (divide), does not work in the formula (instead of printing +), what to do?

    Look VERY carefully at what you see as + the divide symbol appears as a Chief and a threshold which, for some people, looks like a +. If you don't see the symbol try enter the formula and see if it DOES not give you the correct result.

  • Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

    Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

    Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

    (143868)

  • L50-A-10 q satellite: Win8.1 Pro Wi - Fi status LED does not

    Hello

    I have a laptop Toshiba L50-10-to-10 q running BIOS Version 1.30 and THIS Version 1.10.
    I've recently updated to Windows 8 for Windows Pro 8.1.

    I followed the update instructions found on the driver download page.
    All modules (Wifi, Bluetooth, etc.) and the function keys work just fine.

    However, the status LED does not work correctly.
    For Wifi, the status light is always off, even when the Wifi is turned on and connected.

    The State LED to the touchpad is also always off, even when it is disabled.
    SEEING supply and load indicator work fine.
    All the State LED worked correctly before the 8.1 update WIN.
    Is there a solution for this problem?

    Kind regards

    Niko

    Why you n t trying to update or reinstall the driver Intel WLan and driver of Toshiba system yet?
    Since this procedure has allowed to solve the problem of touchpad and I guess that that would solve the problem with the WLan light too.

    [Intel Wireless Lan Driver 16.0.2.1.0.s64 for Windows 8.1-64bits | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 7948 selSh 3983 = ortMod & language = 13 & selOS = 46 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 88542 & OSI D = 46 & driverLanguage = 42]

Maybe you are looking for

  • eliminate the trapezoid distortion

    Will there be an extension to the Photos that will remove the distortion of trapezium?

  • Qosmio X 70-B-10 t does support SSD or HARD disk?

    Hello my name is Christian.I'm going to buy a new laptop and I decide for the new Qosmio X 70-B-10 t (game). I have a question: I don't understand if the laptop is equipped with a single HARD disk or an SSD.Then, I would like to know if there is a si

  • My Finder Windows are frozen

    Hello My Finder window is frozen. I tried to restart. The window closes and opens upward again on its own. (Is it supposed to do that?) And when she opens upward, it's still frozen. When I open another window of Finder, which is also well frozen. I s

  • How can I make a default search engine Bing

    How can I make a default search engine Bing? For example, the homepage of FF has 'Google' above the space where I can type my search query that takes me of course to "Google". How do I change that to 'Bing '? That is my question.

  • Error "Windows-low on registry space."

    32-bit XP Pro For several weeks now, whenever I boot this computer, when I get to theOffice, I get a box 'Windows-low on registry space' which says: the system hashas reached the maximum size allowed for the part of the registry system.Additional sto