HP Pavilion g6 unable to start

Similar Questions

• On a 1100sa Pavilion DM4 how prevents one error message: unable to start Bluetooth stack service?

  I have a HP Pavilion DM4 1100sa, p/n: XE139EAR #ABU, a serial no: CNU1220Z75. I bought it about 2 weeks ago. Shortly after he stopped hibernating when I closed the lid and the fingerprint reader was also very intermittent, also error message unable to start Bluetooth stack service popped up after the computer has been rebooted and after startup of Internet Explorer... My own attempts to remedy that does not so I called your 0844 3690369 number and possibly your man said that the only option was to do a complete restore of the system. For this I made and then reinstalled my commercial software such as M/S Office 2010, Adobe Photoshop elements 9 etc.

  The error (see above) again reappeared and the fingerprint reader was still intermittent, also my Bluetooth mouse is not connected. Yet once, my own attempts to cure these problems have failed, including playback of your pages in the forum, so I phoned again, everything seems to be resolved but the initial problems and the subsequent, reappears.

  So I made an another System Recovery on Thursday, July 26, 2012. I did a full defragmentation and wiped the free space on the hard drive. This time, the only problem that occurs is the error message failed to start Bluetooth stack service. Yet once it appears only after a computer reboot and start Internet Explorer.

  I am very reluctant to spend another hour, or so, on the phone so I want your best and hopefully correct advice on how to avoid this very annoying message from popping up.

  Mike

  We will uninstall the system Broadcom bluetooth driver and that's it.

  We will not install another driver for this device instead.

• ERROR: Unable to start Bluetooth stack service

  I seldome use features wireless to my pc before, but now that I have the wireless router I frequelty use it. Usually, I turn on the wireless switch and turned off to save the battery. I noticed every time I turn on the radio, after a few minutes, that an error message is displayed:

  BTTray

  ERROR: Unable to start Bluetooth stack service

  I don't know if what is wrong with my laptop. Please if anyone can tell me if what is wrong with this thing. Thank you very much!

  HP pavilion dv6820ee

  OS: Windows Vista editions Home premium.

  Message edited by xXxonins on 12/22/2008 05:27

  Access your product download page and reinstall the software for bluetooth under networks:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & Product = 3716846 & lang = in

  then, under network connections in the network and sharing window - see if you have a bluetooth adapter that is listed.  If you do not use bluetooth, you can turn it off or you should be able to set it up properly.

  If fails it then in Control Panel, under administrative tools, Services - locate service BTtray and disable it.

  HTH

• Windows is unable to start.

  Owner of a Pavilion wa694ua #aba little more than 2 years.  Windows is unable to start.  During windows Startup Manager, I receive a status of: 0xc000000f and info: start the selection has failed because the required device is inaccessible.  What to do next?  I have the recovery disks, but is not no longer works.

  Your hard drive may have failed and must be replaced. Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics to test your hard drive.

• Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

  Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

  I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

  My computer is old - 1 year and 25 days to 25 days outside the warranty period.

  Thank you.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. What should I do

  I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. Restarting my computer did not help. Because I had this problem I also noticed that all my favorites that I had copied in Windows Internet Explorer also disappeared. I use Firefox as my main search engine and usually do not use Internet Explorer. I am running Windows 7 on my machine.

  Try this add on the profile folder

• Unable to start after you run the product recovery disc

  Hello

  My laptop was a dual boot with windows XP SP3 and ubuntu

  1. He was infected by the virus and when I tried to clean it I removed the wrong file "services.exe", whereas windows does not work good there

  2. when I tried to uninstall the windows update, I get the error following error: 1068: the dependency service or group could not start

  3. so today, I found the toshiba recovery disks, I run and it commpleted, but now am not able to start my laptop.

  4. when I try to re - install windiws xp I got the error below "couln can't find NTLDR.

  Guys, your help will be much appreciated

  Hello

  > I run and it filled, but now am unable to start my laptop

  Are you sure that installation completed successfully? Looks like the damaged MBR or cannot be attributed

• Satellite P15-S420: unable to start Windows XP

  I hope that all makes sense... I'm unable to start after the start page of Windows XP. I think I have assumed that the computer turn off when there is no. The battery may have exhausted and when I plugged it back in and tried to start it would not.

  When the Windows start page is in place, it seems that HD works for awhile, but stops and goes no further. I am able to boot in safe mode and have tried to restore with no effect. When I click on Toshiba Manager of power supply in the control panel I get "Policy of NoteBook Load Fail" this could be a problem.

  What do you think???
  Oh, I have a Satellite P15-S420.

  Hello

  In my opinion, this power saver error message occurs because you started the laptop in safe mode. In this case, the OS doesn't use the Toshiba drivers that are required for the use of additional applications.
  You write about the restore procedure. Have you tried to install the laptop with the supplied restore CD? If this isn't the case, then try it.

• Satellite P200HD-1DV: the error event to the startup-unable to start a DCOM Server

  Whenever I restart it is extremely slow and in my opinion, caused by the following 2 errors that appear in the system as event ID 10000 event log:

  Unable to start a DCOM Server: {7160A13D-73DA-4CEA-95B9-37356478588A}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxext.exe-integration

  Unable to start a DCOM Server: {078AEF33-C48A-49F7-AFF3-A0EE810BFE7C}. Error: '2 '.
  Happened at the start of this command:
  C:\windows\system32\igfxsrvc.exe-integration

  I think they are Intel drivers, but have failed to find a cure for this problem.
  Other than a real slow start it seems no problem.
  Am that I the only one having this problem and everyone know the cure?

  So, you understand where the problem is but why didn t you have installed graphic drivers intel one another? I mean, you know where is the problem and you can correct it.

  Otherwise, if a reinstallation does not help, it would be better to completely recover your system to eliminate the problem.

  Greetings

• Unable to start bootcamp after partitioning El Capitan

  Lonely HI T,

  I recently partitioned the drive where is installed OSX El Capitan. Now, to press the Option key at startup to the top, I can't select my Bootcamp partition to boot.

  Here's the info re: my product:

  Here is some information about: my volumes:

  • I have OSX installed on a partition 'Macintosh SSD' a 500 GB SSD
  • The files are on a 'Macintosh HD' partition in a 1 TB HARD drive
  • I have Windows Bootcamp installed on a "SOLID" NTFS partition in the same 500GB SSD
  • and another NTFS partition for Windows files "LIQUID" in the same 1 TB HARD drive
  • I also have a new partition (which lead to my problem) "ScratchDisk' in the same 500GB SSD

  Also very "SOLID" and "LIQUID" NTFS partitions are currently read-only that is ' owners: disabled "in disk utility after creating a new partition"ScratchDisk"for Photoshop in the same 500GB SSD and SOLID will not show up to start up after pressing the button 'Option '.

  I already had Tuxera NTFS installed but uninstalled.

  Below you will find the following information:

  • diskutil list
  • Cs diskutil list
  • sudo TPG - vv - r see the/dev/disk0
  • sudo fdisk/dev/disk0

  Thank you for the patience and kindness in advance,

  CESCO

  Last login: Tuesday, February 2, 23:22:10 on ttys000

  Cescos-iMac: ~ list of the Cesco$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh 250,0 disk0s2 GB SSD

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: disk0s4 Apple_HFS ScratchDisk 99.2 GB

  5: Microsoft data base SOLID 150,0 GB disk0s5

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS Macintosh HD 899,2 GB disk1s2

  3: Apple_HFS Recovery HD 650.0 MB disk1s3

  4: Microsoft data base LIQUID 100.0 GB disk1s4

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 500,1 DIS3

  1: Windows_NTFS GB Seagate Expansion Drive 500.1 disk3s1

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ list of cs Cesco$ diskutil

  No logical volume group CoreStorage found

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488188328 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  488597968 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  489867504 193675024 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  683542528 262144

  683804672 292968448 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Cescos-iMac: ~ Cesco$

  Cescos-iMac: ~ Cesco$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-976773167]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Cescos-iMac: ~ Cesco$

  Re: Unable to start bootcamp after partitioning El Capitan

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  It will show you the first block of the SOLID wall.

• Error BTTray: Unable to start Bluetooth Stack Service

  I have an Envy 17 3D (product number: LV045UA #ABA). Recently, shortly after startup, I get an error to the effect that there is a BTTray error as it is unable to start bluetooth stack service.

  I use a Bluetooth Logitech mouse and the mouse continues to work. Befire I started having error, periodically that the mouse could be suddenly disconnected and I must initiate a discovery of the mouse with the Bluetooth discovery mechanism.

  Usually after the rediscovery of the mouse, I would have no other episodes for several days with a new day evey bootup. The error is only a recent development, but the episodes of disconnecting long enough.

  I'm not even sure that the two are linked, and I watch inconsequential number BTTray. However, I want to solve this problem of BTTray error until something of consequence occurs.

  Kind regards

  S.M. Cohen

  Hello

  Please reinstall the driver for Bluetooth module and this problem will be solved.

• answer me please! Unable to start? Bluetooth stack service! that means this popup

  I got NO help from anyone Thanks much all that you brains out there cannot get a response?

  From the other thread:

  Unable to start Bluetooth stack service? What is this and how do I get rid of him. printer works well. This service is useless.

  Hello! very annoyed with a popup that I said at the top left of the BTty yellow! mark in the middle of the box and the message unable to start Bluetooth stack service, I click OK and it goes away a while tried all my settings are unable to get rid of it. It started when I let a 2nd. or 3rd. part microsoft co. take possession of my pc to difficulty clutter & defragment only HELP get me to pay 149.99 at this time, very unhappy.

  Hi Patgariepy,

  What operating system is installed on the computer?

  You get this error if the drivers are not updated, or if the driver has been corrupted. I suggest measures are:

  Method 1: Bluetooth device driver update. Steps to update the device driver:

  a. click on start
  b. Select Control Panel
  c. Select system and maintenance
  d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)
  e. in the Device Manager, look for the Blue tooth device
  f. click on the driver tab and then select Player update

  Link for reference: updating a hardware driver that is not working properly

  http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

  Method 2: Uninstall the Bluetooth device, restart the computer and install the latest drivers.

  You can even check out the link below, which will set the Blue tooth device: point of Bluetooth in Control Panel on a Windows Vista SP2 does not work as expected when you click the http://support.microsoft.com/default.aspx/kb/960531elementNote: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Keeps us up-to-date on the State of the question.

• Unable to start bluetooth stack service

  I can't not connact my phone to my laptop via bluetooth and get the following ERROR... UNABLE TO START BLUETOOTH STACK SERVICE.

  A large part of the obligation for any help.
  Thank you

  Hello

  Method 1.

  Try these steps and see if it works.
  Step 1: Start the Bluetooth service.
  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service (verification of the d.       d.Dependencies of this service and make sure that they can also be programmed to automatic)
  e. click on apply and then click ok.

  Method 2: Bluetooth device driver update. Steps to update the device driver:

  a. click on start

  b. Select Control Panel

  c. Select system and maintenance

  d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)

  e. in the Device Manager, look for the Blue tooth device

  f. click on the driver tab, click Update driver

  Link for reference: updating a hardware driver that is not working properly

  http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

• Windows XP SP3: Unable to start, System Restore cannot drag and drop ALL the files/folders on the desktop and applications, many unable to start, services cannot search, cannot copy or transfer the any files folders...

  After a recent power outage, my system has restarted with a weird and very common Windows problems range. The system boots fine, all my personal files/folders/apps are intact, have suddenly stopped almost all functions of applications, but many crucial functions of the Windows kernel. Everything seems to point to several Windows Services are unable to start (administrative tools on the start menu). I am running Win XP SP3 and that he was going to upgrade to Windows 7, but I wanted to backup everything in advance. As I have 29 000 hours on my C: drive and a lot of time invested in my system, files, and applications, I am extremely reluctant to risk losing my files and applications by performing any type of reinstalling Windows. Strangely, begin to almost all my apps and all my files are accessible for the most part, but I've lost the ability to drag and drop files, folders or items in a list within the applications COMPLETELY. I can't copy or paste anything, can't move the desktop icons (although I can create new files and folders). So at the moment I can't save anything or even a single file transfer to a hard drive on another storage medium. Immediate reaction: try safe mode and try the system restore safe mode has the same problems (likely due to the large number of system services that inexplicably refuses to start) and the system restore says an error window saying "system restore is not able to protect your computer at this time. try restoring the system running and restart again", which of course NEVER changes. It's the equivalent of getting a tire on your car in the middle of nowhere to find the spare tire flat and the missing Jack. I have used to be fanatical about the definition of the regular restore points, but now can not access them. I have backups of most of my personal files, but over years have lost most of the original installation CD for many of my applications (there are over 100 applications on my system) and I don't want to lose the file associations and architecture of directory tree that it took my so long to implement. I started with Win XP media center edition of first (circa 2004 or almost) and have migrated twice more of 3 hard disks and 2 computers. All this time (5 years of daily use), I have NEVER known so many malfunctions for as many Windows basic and vital functions at the same time. I tried a lot of 3rd party "windows fix - it / registry repair" apps, all have no effect. Everything I can speculate is there was some serious damage to the registry and have no idea how/why so many Services refuse to start. In MMC, more than half of the services actually start and run, the rest all give the error message "the service or dependencies is not start (error 1068).» In addition, very oddly, no. APPS or windows appear in the toolbar AT ALL, but the Quick Launch toolbar works very well, just like the tray button and start tasks (?! )!). If I reduce a window, it "disappears" (Nothing on the task bar), but I can restore it using the alt - tab keyboard shortcut to switch apps, so all applications/windows appear on the list of the Task Manager. A few apps is paralyzed bad, as the player windows media, itunes, etc. (I guess because the service windows audio can not not start), some won't start at all, but 90% of them work fine, except to try to copy or back up all files. I can create new files, however. I'm desperate to find a solution to repair XP3 Win WITHOUT losing my installed applications and files, before I try and switch to WIndows 7. Any help/suggestions/links/advice would be much appreciated. I'm an experienced user, but I've never met so many malfunctions based on the OS at a time. I, however, very painfully learned (years before that my system so complex) it's been almost a re-installation of Windows guarantees to lose my installed apps and files, the directory tree architecture associations.

  Help, please!

  I'll be honest with you - your message is so difficult to read that I don't bother to go through all that. Next time consider using white space, ball or points numbered, etc. to make your message more readable. I stopped reading after your first sentence and only scanned the rest quickly. I do not mean to hurt your feelings; just trying to help you get targeted answers you need for the future.

  The blackout has corrupted your Windows installation. Back up your data now. Since you have problems so much, it would be probably best is to remove the hard drive, put it in a USB drive enclosure and attach it to another computer to copy the data OR start the target with Linux Livecd such as Knoppix system and copy the data to an external hard drive. IOW, do not use the damaged windows to try to get your data.

  You can try a repair that will leave your programs and facility data intact, but with this widespread bribery, it is unlikely to work. However, it takes only a few minutes and is so worth a try. If the repair facility does not work there is nothing to do, but a clean install. And Yes, it will mean that over again.

  Consider buying a UPS to help prevent future damage by power outages. For a single computer, you should look for one in the area of $60 to 80. A more expensive UPS is not necessary. Another good disaster recovery strategy is to buy an external hard drive and Acronis True Image. You can image your system (and can make an incremental backup image so that your image is still current). You can apply your image and be back running that you were in relatively few minutes after a hard drive or Windows to fail.

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

• I am running XP Home Edition, when I right click on an icon/folder on my desktop, I get a fatal error message of "unable to start this program because it lacks the 'resources' directory or one of its subfolders. __

  I am running XP Home Edition when I right click on an icon/folder on my desktop, I get a fatal error message of «unable to start this program because it lacks the "resources" directory or one of its subfolders» How best to solve this problem without reload my OS which would be suh a pain that I've been running with it for many years and to return to, where I'm now should always be! »

  Right click issues are usually caused by third party software who pushed himself into the context menu. This is more easily managed using the ShellExView free program.

  http://www.nirsoft.net/utils/shexview.html - ShellExView

  Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
  Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic!