HP Pavilion g7-1340dx Windows 7. The error message

My computer is HP Pavilion g7-1340dx Windows 7 is my operating system. My error is failure Terminal:-for playback. C:\HP\Data\HPLB\HPLBUS. DAT appears every time I start my computer. What can be done to fix this error?

Hi BMcQ328354, welcome to the Forums of HP. This Terminal failure is an error C++ related to launch of HP. You can solve this problem by referring to the @AttackofZaq post in this thread: Re: failure of power Terminal

Tags: Notebooks

Similar Questions

  • Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]

    Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]

    Here is a list of the ports/areas to the whitelist to access the DPS Server problems

  • Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

    Initial version of updated title: windows

    My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

    Hello

    Have you made changes on the computer before this problem?

    Method 1:

     

    Troubleshoot problems with installing updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    Try the procedure described in the following article and check the status of the issue.

    http://support.Microsoft.com/kb/822798

    Restart the computer and check it please for windows update.

    Hope the above information is helpful.

  • Windows 8, the error message indicates printer does not print. It prints, but does not remove the queues

    I use Windows 8 Pro, 64-bit on a printer of a6700y Pavilion with a printer PhotoSmart 310. When I print, I get an error message saying that there is an error, and the document will not print. The document prints correctly, but will not remove the file in the print queue... I have to manually delete the file in the queue. Of course, it's a software problem. How can I solve this problem?

    Hi eri2198859,

    HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

    I would like to know what are the errors you receive?

    http://www.HP.com/go/tools

  • Cannot log on to Windows 7, the error message: could not update the BITMAP ' 6801´:24

    Original title: logon W7 error
     
    When I connect to my home edition W7 (genuine windows) and type my password it happens an error reading box:
    "Could not update the BITMAP"6801´:24"and when I click on enter 6801, 6802 changes all the way to 6812 once everything is back to normal.

    Ive made a clean boot it and I have no restore point system were everythings were very good...
    This somewhat bothers me so promptly!
    Have a nice weekend
    Jonas

    Hello

    Thanks for the update.

    We are pleased to hear that you solved the problem.

    If you have questions about Windows operating systems, help us on this forum. We are pleased to be of assistance.

  • HP Pavilion P6 - 2100 on the error message from Windows 7

    I tried all the things recommended on Microsoft and on the internet. Nothing works to get rid of this error message. Others have had the same problem and finally, I think we all give up trying to find a real answer.  Please help us fix.

    The error message is:

    error unknown message turn off '-auto'

    Hello again ucimdboss2,

    Thank you for your quick response. Nice that you said that I recommend that you perform a factory restore. The HP Support document: backup of files (Windows 7) should be your first step. This document will provide you with instructions, you should back up your user files so that you don't lose it when you make the resumption of the plant. Then, you want to follow the HP Support document: performing a recovery of HP (Windows 7) system, which will guide you through the process of restoring factory HP. Once complete, you can restore your backup of the files and be back on without software errors.

    These steps will be clear all errors in your operating system and return your system to operate as it did when you bought everything first.

    I think that this will solve your error. Thank you for bringing This problem on the HP Forums. Have a great day!

  • C4280 showed the error message "A4 not loaded in any bin" in Windows 8

    I connect my HP Photosmart C4280 all-in-One printer to my new laptop with Windows 8. Paper & I tried to print. However, he showed the error message "No loaded into any tray A4" and not printed.

    More information, I can't have ink cartridge 75 market. If the printer running with cartridge only 74.

    Please tell us how to solve the problem.

    I have uninstall & re-install the software. However, it does not work. But I discovered that running in 1 cartridge must be any problem, because it shows he showed as "single cartridge Mode."

    After that, I studied the error again & discovered "unloaded... A4. "look like related to digitization. Then, I tried to scan a document. After that, I tried to print a document & it works.

  • HP Pavilion a1220n starts cold start, but gets the error message to "restart".

    Restart in function, the error message: "reboot and select proper boot service or insert boot media in selected boot device and press a key.

    One way to start is to power down then upward.  Windows will load.  What is the problem with the hot start?

    Running WIN 7 Home Premium 64-bit.

    Any suggestion is appreciated.

    Hello

    Disconnect all USB devices except the keyboard and mouse.  Don't forget that the CD drive is empty.

    Try to clear the CMOS memory.

    Looks like your PC is trying to boot from LAN.  If this is the case then to clear the CMOS will change all the parameters of the bios to the default values.

  • Could not open the page to update windows with the error 80072efe

    Could not open the page to update windows with the error 80072efe

    0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    TaurArian [MVP] 2005-2010 - Update Services

  • C:\Windows\system32\sfc.dll is the error message I receive while trying to install a game on a DVD.

    When I close the error message the game window tries to install then I get a file closing message installation failure.     Setup.exe bad Image C:\Windows\system32\sfc.dll

    Probably, you need perform the repair facility, see this link http://www.sevenforums.com/tutorials/3413-repair-install.html

  • Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

    Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

    Current solution: download IE8 for XP, run who, follow the Setup Wizard, wait for his failure. Download manually upgrade restart, recommended.

    Restart the installation of IE8, wait that he remove previous IE. Reset.

    Installation of IE8 restart to restart. Let it run. May need to restart.

    Try to run windows update again. IF it works, woot, otherwise download the SP3 of XP service pack from Microsoft. As the Windows update fails, you must not download an installer, but an ISO standard. Burn the ISO to a CD and install (way to go...) or download a free tool like 7Zip and unpack iso and install a go from there.

    From there on, the installation of SP3 and hope this works...

  • I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

    I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

    Hello

    Thanks for asking!

    You cannot install updates Windows and error migration was not able to transfer.

    The problem can occur if the update of the components are damaged.

    Is the message of exact error that appears?

    I suggest you to reset the update components and check if the problem persists.

    See the site:

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows XP

    http://support.Microsoft.com/kb/322756/

  • Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

    Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

    I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

    Thanks, I'd appreciate any help.

    It is always useful to have the complete error message without paraphrase.

    It also helps to identify the version of Windows you have, including service pack.

    And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

    Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

    It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

    You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

    I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

    Don't skip step 4.  After step 4 and step 5, follow these steps:

    Important: If you have a Lexmark printer, skip the following

    Open a command prompt window (start > run > cmd > OK)
    type the following in the black command prompt window, and then press ENTER after each line

    net stop spooler
    dependent on the spooler of sc config = RPCSS
    net start spooler
    output

    Note that there is no space before the = and there is a space after it.

    The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

  • I have NO SOUND on my computer and the Windows Media Player error message is C00D11BA.

    To try to solve the problem that I discovered in the Audio tab in sounds and Audio devices properties, there is No default unit in the area of audio playback and No default unit in the peripheral zone of MIDI playback.  In addition, the general tab in the properties of the device Audio USB says "this device is working properly" and that it is enabled as described in the use of the device box. The general tab of the device Audio USB also said the "Driver is enabled and working properly."

    I am able to record dictation through a program of Dragon NaturallySpeaking.

    I'm on Windows XP Pro with Service Pack 3, and before that I lost sound had not recently added that any hardware or software even though I may have uninstalled some rarely used program.

    Hello

    The usual cause of the error C00D11BA is when the sound card drivers are not installed or outdated.

    Windows Media Player cannot play the file because there is a problem with the audio device, such as a map his or her controller.

    Method 1:

    You can follow this link & check if the problem persists.

    Windows Media Player Error Message help

    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=c00d11ba&ContextId=68&OriginalID=80040256

    Method 2:

    Diagnose and solve the problems of Windows audio playback automatically

    http://support.Microsoft.com/mats/AudioPlayback/

    You can also try the manual steps provided in the below mentioned link and check.

    How to troubleshoot sound problems in Windows XP

    http://support.Microsoft.com/kb/307918/en-GB

    Hope this helps and keep us posted.

  • As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

    Original title: Rundll error help

    As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

Maybe you are looking for

  • External backups Time Machine

    Hello! The MacMini to my dad, he has a backup storage more as external 4 TB Seagate and Time Machine recognizes it in the 'Options' from the settings page so that it can be part of the Time Machine backup. I don't have external storage but I do not u

  • What can I do to make the Satellite A665-S6086 run with the new memory?

    I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total). My questio

  • Internal speakers cut?

    MI Xoom ceased to play any sound through the internal speakers. They worked well at first, but a week ago that they have been muted for games, video and music. However, I get the sound with headphones. The speakers are not broken, that I receive the

  • W540 users Hibernate problem - please reproduce

    Hello I am running Windows 8.1 with the latest drivers. When I put the system to stand-by and turn on again (or close the lid and open again), the screen remains black, keyboard responds and you hear that WAV sound that a device has been disconnected

  • Problem of corrupted files

    I have a question. I have an error message that comes up constantly as corrupted file VProtector:vprot.exe.  It lists the name of the corrupted file and suggests that the utility Chkdsk trun. I don't know how to do it. I rebooted and the chkdsk count