HP Pavilion g7-sr2377 Nr. D2H11EA #ACB problem with switchable graphics

Similar Questions

• Problem with double graphic

  I have the HP PAVILION G6 model 1202TX. It is built with dual INTEL and RADEON graphics. INTEL - Intel HD Graphics 3000 and

  AMD Radeon (TM) HD 6470M.earlier accidentally, I've lost my windows and its drivers, but my main problem is with graphics of ts. If I install the AMD drivers that shows a problem with INTEL graphics card notification bar and if I install INSTALL it shows with RADEON question. After the driver installation, whenever I restart my pc AMD shows a dialog box, and then if I install AMD, INTEL keeps poping up notification bar in the lower right corner of the pc it something related to the SYSTEM TRAY INTEL GRAPHICS card.

  Now, I have installed INTEL graphic driver I have and every time ii restart my pc it displays a dialog box

  This appers to dialog box every time I start my pc

  PLEASE HELP ME

  Hope for action freequent

  THNK YOU.

  Hi ashwani26596,

  We will start by using the HP Support Assistant to check updates and drivers to see if that solves the problem. If this does not work then go to your Panel and then programs and features and uninstall the Catalyst Control Center. Then try to install the Driver for high definition Audio Intel and AMD High-Definition Audio Driver.

  Thank you

• Problems with the graphics to Equium A60 driver

  Hello everyone,

  First sorry for my bad English.

  I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

  I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
  Could someone help me find a solution to my problem?
  Thank you very much

  Eurytheus

  Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

  Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

  Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

• my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

  computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

  To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
  Help would be much appreciated?

  Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

  Thanks for the effort though...

• Problems with the graphics card when you use AutoCad

  Hi, I have a dell xps 18.4 - i7 with 8 GB of RAM, when I'm working with Auto CAD I face problem with my graphic card, what can I do to fix this? has any experience with that? the graphics card is Intel(r) HD Graphics 4000

  Hello

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience.

  I suggest you to try installing the driver in compatibility mode and tick.
  Reference:
  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please keep us informed.

  Thank you

• I have a problem with a graphic refreshing after its related data provider changes.

  I have a problem with a graphic refreshing after its related data provider changes. After calling the subsetHighLowData.refresh () I expect the table to redraw, but he looks always the same. I even checked the debugger to see if the range had occurred and he had.
  
  Ideas of friend codes?

  "nikos101" wrote in message
  News:gib6aa$PRR$1@forums. Macromedia.com...
  > I have a problem with a graphic refreshing after its related data provider
  > changes.
  > After calling the subsetHighLowData.refresh () I expect the graph
  > to
  > redraw, but it still looks like the same. I even checked the debugger to see
  > If
  > the slice took place and he had.
  >
  > Any ideas friends coding?
  >
  > subsetHighLowData.source =
  > highLowData.source.slice(slider.values[0],slider.values[1]);

  Just use the removeItemAt collection ArrayCollection, and it must handle the event
  a distribution for you.

  HTH;

  Amy

• Problem with the graphics card drivers

  Hello

  My laptop is running the radeon hd 6470 m and I installed the driver HP offers on this Web site (this is the version 8.882.2.0). Now this driver works fine, except when I try to play some games. I love playing the game League of Legends, and with this driver installed this game does not work correctly, so I tried and return the driver back to the one that came with it when I first got this laptop (this is the version 8.830.6.3000). Now the strange thing is that with this driver installed I can play League of Legends, but other games and some programs do not work correctly on this driver, I guess because it is an older driver. Now I want to basically just installed a driver that can run both.

  I'm not sure this is the right forum to post this problem, but it is the first that I try

  My laptop:

  HP Pavilion 1270sd g7

  It's switchable graphics with Radeon hd 6470 m and Intel graphics.

  With sincere friendships.

  Sjoerd

  Just noticed that this driver is for windows 8, I m running windows 7 64 bit

• Problems with the graphics card

  Hey, so I spent recently to my laptop HP Pavilion of 15-n298sa of a windows 06:52 and she since has earned me an endless stream of problems, especially with my graphics card. As I am on break from uni I re-uploaded all my games on my computer and found that none of them bar those made before the middle of the 2000s, play for me and for all name them my graphics as being the problem - like solitaire spider fact etc. All have previously been playable, about a month ago, so I know that it shouldn't be a problem. I tried several times to install the graphics drivers (one-I can't remember their names - AMD would apparently install and that NVIDIA could not). When looking at the Info for the graphic drivers installed, "Standard VGA Graphics Adapter" that it's 2006 so I guess that AMD, it has not actually installed / was done wrongly. I was wondering if someone could help me?

  BTW, I'm a complete technophobe and total so if you have an idea of what to do, I would appreciate it if you could put it in other words, because I am a plonker when it comes of this.

  Hello:

  See if this graphics driver works.  Your computer laptop is only the graphics card Intel HD 4400 so don't expect too much of it.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24392

  Product sheet of your model...

  http://support.HP.com/us-en/document/c04102914

• Satellite M30 - problem with the graphics driver and Quicktime movies

  I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

  I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

  Can someone tell me why this might be?

  Hello

  Do you use the graphics driver from the Toshiba driver page?

  Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
  This version uses these features:

  -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
  -Codecs QuickTime [version 7.1.3.100]
  -QuickTime plugin for Internet Explorer
  -QuickTime plugin for Opera/Mozilla/Netscape
  -Extra plugins for QuickTime
  -QuickTime DirectShow parser
  -Wrapper DirectShow QuickTime decoder
  -CoreAVC 0.0.0.4
  -CoreAAC 1.2.0.575

  check it out...

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• HP ENVy 4 1102tx: big problem with computer graphic card hp laptop

  MY computer laptop hp envy 1102tx running 64-bit win 8

  When I bought my laptop there were some problems with the display, she would get destorted occasionally. But over time, this problem became worse as

  1. display and sometimes audio would get very disttorted that seems to be the screen flashes, but if I run a game or high demanding software chart everything is normal.

  2. sometimes touchpad and some keyboard keys stop working

  I tried

  1 system restore using the recovery partition

  2 update screen adopting several times

  3. when I got my laptop the customer, what they came up with a temporary solution to a deactivation of the adopter display amd

  but adoptive parents to display like this switching is so boredom

  Is there a permanent thanks to this problem?

  When some people are updated there victory hp 8 machines 8.1 that they also get the screen black on startup, why is this? is this an inherent problem with the time between two different graphics cards?

  Hi @lima619

  Welcome to the HP support community! I see that you have some problems with your desire to 4. Try to install your driver high definition Audio Intelas it should be the graphics card that manages the basic functions. I'd also sure that your Catalyst Control Center is only the Setup for your high performance games and programs. This HP document will show you how do it.

  By system restore you did take back you to factory defects as in a collection or just go to a previous restore point? If you have a full recovery to factory settings then it seems like it might be a hardware problem with the keys / TouchPad if they start working again.

• Problems with the graphic driver for Elitebook 8460p

  Hello

  I m of the problems with the Elitebook 8460p driver display. The latest version (15.28.20.64.3347), published on 16 June 2014 have some problems on the laptop. When the laptop is running on battery screen suffers from flicker and damaged graphics, as you can see in this video:

  https://www.YouTube.com/watch?v=gQ1w0aOaF7A

  (you can see the flickering between 0:20-0:22)

  I contacted with support local hp and send me a COMPUTER technician, who has changed my motherboard and CPU, but nothing worked. I tried to contact with intel for support (the issue is present with drivers intel non - oem), but they are sending me to the OEM. I would like to have a real driver that works with the system (3347 is a driver of the year), is it possible?

  This isn´t of question at all in linux drivers, more change motherboard I totally ignore a hardware problem.

  I can provide feedback to any solution.

  Thank you!

  Another update:

  Found a solution to this thread (which I started) in the forums of intel:

  https://communities.Intel.com/thread/48327?start=0&TSTART=0

• Problems with discrete graphics from NVS 5200 m on T430s

  Hey all,.

  I just got my T430s mail this past weekend, and I had trouble with the Blue Screen of Death. It happened twice so far, and both times the graphics card is not recognized after reboot. The first time it happened, I tried to do a system restore, but that did nothing. I reinstalled the initial configuration using the recovery partitiion operating system, and that did the trick.

  The blue screen of death just happened again, and exactly the same problem has cropped up again. After reboot, the system no longer recognizes it has a discrete graphics card. When I try to start the Nvidia Control Panel, it tells me that it cannot detect a discrete graphics card in the system.

  I did a quick search of the forum, and I can't find any thread with a similar problem. I found this in the Lenovo support area, but it is not relevant to my http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT052544equipment >

  On the NVIDIA site, I can only find drivers 'Beta' for NVS 5200 M http://www.nvidia.com/object/notebook-win8-win7-winvista-64bit-304.79-beta-driver.html>. After you download the driver and any attempt to install, the system gives me the same error that it cannot find any compatible graphics hardware.

  Here's my hardware configuration:

  ThinkPad T430s

  i5 3320 M 2.60 GHz

  NViDIA NVS 5200 m

  4 GB of RAM (stock)

  360 GB HARD drive (stock)

  It is located in Optimus. I don't think that there is only a discreet.

  I called Lenovo support center and discovered that there is a new graphics driver. Have not had a problem with the blue screen of death since then. Looks like that was the problem.

  Once more, if it happens again, I'll be sure to post here.

  -Dean

• Problems with the graphics card and games (World of Warcraft)

  Packard Bell IPower x2.0, NVidia GT130, when playing World of Warcraft, sometimes system stops screen goes black and the computer does not respond to any imput switch simply disable manual mode, pilots are the last and no other problems with other programs. Thank you

  This just started happening, or has it always been the case with this game?

  Have you tried:

  http://us.blizzard.com/support/article.xml?locale=en_US&articleId=21622&parentCategoryId&pageNumber=1&categoryId=2334 ?

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Problems with the graphics, as well as circular Buffer

  Hello

  I am having several problems with my chart. Basically, every time I move the Panel before or shake it, data do not appear to be connected and it screws to the top of the chart.

  Second, whenever my buffer fills, 50% of the time, it is this line that appears at the end of the graph at the beginning for a fraction of a second. I do not understand why it would happen only sometimes however, because many times the buffer fills, but this does not happen.

  If anyone has had this problem before and knows a good way to fix it, it would be appreciated. I tried to see and undefer updates to the front panel, but that did not help my graphic. Thus, my CPU usage is quite high.

  I don't know the details of the Galil motion card, but looks like you he might order from the UI thread. When you hold the mouse on a border of window in Windows, the user interface thread is not available for a period of time, and the call of the DLL just hangs. If you do not order the Galil with a DLL, see if the DLL is set to run in the UI thread (it will be orange.) This is the default value; LabView assumes that your DLL is not thread-safe if you identify exactly what. If the DLL is thread-safe, you can change the configuration of appeal to let it run in any thread.