HP Pavilion G7 Test error code #.

I have a laptop HP Pavilion G7. I recently had someone snap my laptop close, and now when I try to boot my laptop, I get a black screen. I tried to do a hard reset and nothing. I went into the BIOS screen and reset it and still nothing. I went into the test system, and I get the following error-90D7HA-6GT766R-MFPWW1-60SA03 when attempting to run the disk check. I want to make sure that I need to replace the drive hard until I got out and pay $150 that I did not. I'd hate to so he can be the wrong thing and wasting money. I just replace the hard drive about a year after it went wrong.

Thanks for your help!

Hello

Model number, operating system, 32 or 64-bit?

If it's a CHIP or SHORT or LONG DST FAIL,.

The failure of 24 characters what ID means the HARD drive is faulty / failed & it must be replaced by a new one.

If you do not have the recovery discs, you may get too much HP for reinstall factory settings,

Alternatively, if you have the product key to 25 characters (Windows 7), you could download file ISO OEM operating system & reinstall,
The pilots could come from HP product site

Kind regards

Tags: Notebooks

Similar Questions

  • The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000 does anyone know what this means?

    The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000

    Anyone know what this means?  Next steps?

    styner55 wrote:

    The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000

    Anyone know what this means?  Next steps?

    An error in temperature sensor associated with the component of battery on the CPU

    Your only option is to take a test 'Apple Service Diagnostics'

    Genius of booking http://www.apple.com/retail/geniusbar/

    Online https://getsupport.apple.com/GetproductgroupList.action

    check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Test error code: 08-error has been detected by repairing bad sectors. WD 4000BEV external.

    Hello
    Just scanned my external hard drive Western Digital Data LifeGuard Diagnostics. Even now, I did not face any problem with my hard drive, since I've not scanned for any AGE of bad sectors, so I thought to search for bad sectors and to repair, if it is there.
     
    Test option: EXTENDED TEST
    Model number: WD 4000BEV external
    Firmware number: 1.05
    Capacity: 400,09 GB
    Smart function: PASS
    Test result: FAIL
    Test error code: 08-error has been detected by repairing bad sectors.
    Test duration: 02:44:39, August 5, 2013
     
    so, what should I do now? I'll ignore it or are at - it another way to fix/repair bad sectors.
    Is there another way where windows 8 will help my external HARD to fix/repair disk bad sectors?
     
    Please answer soon.
     
    Bye,.
    Siva

    Hi Siva,

    As the material ages during normal use and other sectors begin to fail. Finally, the spare parts store is out of stock, how new bad sectors cannot be erased and are detectable in threrefore tests. T hard drive is at the end of his life at this point, I suggest you make a backup of all important data.
    You can also post your request in the forum of the community of WD:
  • Apple Hardware Test - Error Code

    Dear all,

    I ran the Apple Hardware Test on my Macbook Pro 15 "mid model 2012 and has detected an error (4BAT / 6 / 40000005: 0x8b815390) I tried to find the error code, but do not succeed."  Is there someone who can help me regarding this issue?

    Thank you.

    See this thread Test of hardware error: 4BAT / 6 /...

  • Apple Hardware test error code: 4SNS/1/40000000: TB3T - 128,000

    I ran, the Apple hardware test and received the error code 4SNS/1/40000000: TB3T - 128,000. I can't find anywhere what means this error code. What should I do to repair or correct?

    Thank you for your time and consideration on this issue!

    Warm greetings,

    Paul

    Paul, you should make an appointment and take your Macbook service, either to the nearest Apple store or FSAA. The error code appears to indicate a battery temperature sensor error.

  • hard drive HP pavilion g6 1325sa error code

    Hi my laptop wifes simply ceased to run correctly the other day, slow to do anything, has been after an update from MS, perhaps coinsidence but when NLB is test Diagnostics HP he has failed the test of shore hard with error code 9LXALM-66 X 755 - MFPX1G-60RR03 AND the CODE 9LXALM-66 X 755-MFPX1G - 60Q 903 when you make the beginning upward any help please

    Hello

    The error codes 24 Smart character or drive Self Test (DST) chess - in both cases, this would indicate that hard is defective and must be replaced.  It is also compatible with the slow performance that describe you

    If your laptop is still under warranty, contact HP (with two error codes) and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United Kingdom, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

  • HP Pavilion dv6 2021TX: error code-72352777

    Enter the administrator password or power on password... hp Pavilion dv6-2120tx... pls help me... error code 72352777. kindly help

    @saget

    Enter 63030379

    Kind regards

    DP - K

  • My drive is not recognized... I did the diagnostic test error Code 00F0:286E someone please HELP

    I tried to put a disc that has CD - R80 disk in my computer with the files that it contains, but the drive is not recognized and I did the diagnostic test and it came up with error code 0f00:286E... Anyone know whats wrong?


  • Pavilion 15-p047na: error code 0xc000000f on hp Pavilion 15-p047na with windows 10

    Not my finest hour. I had the machine again on 16 December, with 8.1 windows 64-bit pre-installed. I left Windows push with updates, but found he had tried to install Windows Technical Preview 10 on top of 8.1, blocking of result. With the help of hp, I managed to do a reset, but Windows 10, not 8.1 as expected.

    I was already running 10 Windows on a desktop computer, so I wasn't too worried, but he began to be unstable, with frequent messages «Windows has encountered a problem and needs to restart...» "The last time this happened, the machine restarts with a blue screen and wouldn't boot without a disk or same dban diagnosis. I can get into BIOS and other screens, but everything I try, I get an error message: «your PC needs to be repaired...» "Error code: 0xc000000f.

    What can I do now? I'd settle for any version of Windows or Linux, but nothing will load. Any help very welcome!

    Thank you
    Edward

    Hi, Edward
    Good news, I hope that all the good tracks and Yes please let me know the outcome. Good work Sir

    Kind regards
    Checkurtech

  • Pavilion dv 6: master the code password administrator or power on password for HP Pavilion 69639509 m6 error code

    master code please 69639509 error code

    @QWERTY4

    Enter 76791529

    REO

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  • PCI-6224-88302 during the self-test error code

    Hello

    I'm having a problem with the auto test my card PCI-6224 in my computer. I am able to run 2 different tables successfully on 2 different computers, but this computer is that it seems to give me trouble.

    When I open NI MAX to run the test, it gives me a code error-88302 and explains the problem with the connection. I have tried unplugging the DAQ for my circuit and rerun the test but got the same error.

    How can - I have worse to pull this problem to take my next steps to solve this?

    Thank you

    Brandon Deal

    Yes, at this point, it sounds like a software on this particular calculation problem - most likely a problem with DAQmx. What version of currently installed DAQmx? When you try the first troubleshooting steps that I recommended, don't you just fixed DAQmx or upgrade to the latest version of the driver? If you just fixed your existing installation, you can try upgrading to DAQmx 9.8 instead. You can download DAQmx 9.8 from the link below.

    NOR-DAQmx 9.8

    http://www.NI.com/download/NI-DAQmx-9.8/4297/en/

    Alternatively, you can try to reset the MAX configuration data. It is rare for this to happen, the MAX configuration database may be damaged, which may cause sytem problem as you can see. Follow the steps outlined in the document below to reset configuration data.

    What is the process to reset the MAX Database?

    http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

    At this point, it is probably just a matter of identifying what software is defective/corrupted and repair/reinstall. You can continue to try to do for this machine, or if you have another machine of work available, you can switch to this computer - depending on what is most convenient for you.

    Kind regards

  • Pavilion dv5-2035dx: error code BIOS corruption of HP Pavilion dv5 [DEAD VIDEO CARD]

    Product: Pavilion dv5-2035dx

    OS: Dual boot Linux Mint 16 and Windows 7 64-bit (no HP recovery partition) edition

    HP recovery discs: I have them, but cannot use them because the DVD laser does not (CD only)

    Symptoms:

    • While in the normal conditions of use, screen has suddenly had vertical lines black and gray
    • After reboot, the computer lights up and the fan works, but the screen is black
    • CTRL key flashes white light: 2 flashes, pause and repeat (BIOS corruption)

    Hello, I'm recovering from the corruption of BIOS, hoping that it is not a failed mobo.

    I downloaded the latest BIOS update for my system, but I can't this file to install on an external USB key using HP instructions to restore the BIOS.

    To 1.11 step, I don't get the "HP system BIOS Update Utility" screen. Instead, I get this:

    My questions:

    1. is there an easy way to get this .exe on a USB? (I tried 3 computers and 3 cards USB, WTH then?)

    2. If not, can I just unzip and create a bootable USB in another program by copy/pasting the BIOS file?

    3. is there anything else I should try before flashing the BIOS?

    Thanks in advance for your help. ^^

    UPDATE: the "BIOS error" was in fact the video card that failed due to repeated overheating. The repair shop, replace the video card and repaired the overheating problem (I don't ask how), and my computer is like new.

    For those who have a similar with their computer, my error "BIOS" problem (as it is coded by flashing lights of my computer) turns out to be a video card has failed.

    The repair shop, said that what happens when computers overheat frequently, which mine did. Thus, they have changed the video card and solved the overheating problem, and my computer is in working condition.

  • Pavilion f series: error code

    Hello

    I have a HP G laptop computer series:

    After 3 attempts having failed, I got the 58850425 code.

    The Code does not work! Please help me?

    @rupesh_377

    Enter: 47738401

    Kind regards

    DP - K

  • Pavilion 15 P189SA: Error Code PLQA3H-7G889S-MFPV6K-60RJ03 - HP Pavilion P189SA 15

    PC does not start at the top and displays the error above, that it's my daughters PC if unsure as to why this has caused!

    Ideas of how to do to retrieve this PC, I read that I might have to renew the drive!

    Thank you

    HR.

    You are welcome

    All the best,

    DP - K

  • Apple Hardware Test Error: 4BAT/6/40000005: 0x898fb90

    Apple Hardware Test Error: 4BAT/6/40000005: 0x8984fb90

    Anyone know what this code hardware error test means or is for?  I just had to replace my trackpad again today because it was not moving.  Now, my computer works fine.  I did a test of material just for the * of it and it came with this Apple Hardware Test Error code: 4BAT/6/40000005: 0x8984fb90

    3 months ago apple store replaced the following on my computer: Logic Board 2.5 GHz, screen clamshell Glossy 13, Top Case w/US, Trackpad, MagSafe Board keyboard. I also bought a new battery.  So pretty much everything has been replaced on my computer.  I'm afraid that the Trackpad, I just replaced is one more sign of coming trouble.  If anyone knows what means this error code, please let me know!  Thank you for your help.

    I have a MacBook Pro 13 inch (mid-2012) A1278.

    I just wanted to add that I forgot the 4 in the code for the title of my post.  The error Code is Apple Hardware Test Error: 4BAT/6/40000005: 0x8984fb90

Maybe you are looking for

  • Cannot open requested popups

    Last week, I started having a problem at the opening of the requested popups. (As in, clicking a button to leave a comment on a blog or on pinterest "pin" button, when after clicking on them, a pop up window should open.) I downloaded the latest vers

  • cRIO run multiple Applications?

    Is it possible to run multiple applications on a target cRIO?  Would they all need to be part of the same project in LabVIEW?  Can I set more than one as a starting VI or need to create a VI that would start up individule applications?  They are the

  • two names of different buttons, changes after the first press

    Is it possible to change the display of a Boolean button? When the VI is started, the button reads "START". Each successive push would read "ACCEPT."

  • I have a G510n all-in-one Officejet wireless that does not print in Cyan.

    The cartridges are full, I cleaned the printheads several times, made all the diagnostic tests, restarted the computer, reinstalled the software and drivers.  I can't align the print heads because the scanner cannot see blue lines due to their not pr

  • Existing connection had to be closed by the remote host

    Need help with this error I have a dev and a uat environment. I have a small form that I use as a method to call a web service. Essentially, the form contains a web service URL text box. If I call the shape on the dev and pointer to the service web d