HP Pavilion G72: System Recovery

Similar Questions

• Confusion of (g7-1260us pavilion) HP system recovery

  I have a computer portable pavilion g7-1260us, installed at the factory windows 7

  I'm having some internet connection problems, but I write really just on the recovery process.  I've owned laptops HP before and know the Recovery Manager is running.  The hard drive (HD) has 3 partitions.  The 'local' OS partition plus a "Recovery" partition a partition of 'HP_Tools '.

  I did a search from the Start button and found HP Recovery Manager, which I ran.  I want to run repressive recovery, but since the screen title it says "(personnes à mobilité réduite: Pleasue utiliser un support de récupération pour restaurer votre système)". "  I've owned the laptop about 6 months but never did no recovery media and there is just no prerequisites windows created restore points.

  Sullen I can restore this laptop to factory, right?  Otherwise, why have such a great recovery partition?  I considered running the "creation of Media Recovery" to make the DVDs, but to my knowledge that creates an image of the system as-it-now-is, rather than just creating DVDs that will restore a fresh factory setting.

  Is there a way to do a "system recovery" despite the possibility of being disabled?  Peroxide of hydrogen used to have an option to perform a recovery of 'factory' which to me is an exaggeration, but I consider that if it were possible.

  What are my options?  Thank you.

  Hello

  You are welcome

  You're right, that all methods of HP recovery will install all the necessary drivers.

  If you are doing a new installation, Windows 7 does a good job of installing most of the necessary drivers, but you will almost always install the drivers for the card reader and Intel Management Engine Interface from HP.

  Regarding the current connection problem, from what you describe, I would say that by far the most likely cause is a damaged or misconfigured McAfee installation.  As with most security software, the option to stop scanning and real-time components will not completely disable the software.

  I try to completely uninstall McAfee, restart the computer and see if it now connects to the Internet - if not always connect. in the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  ipconfig/all                     (Note that there is a space between ipconfig and /).

  Copy the results in this window by right-clicking and choosing "Select all", hold down the CTRL key and press C, open Notepad, press and hold Ctrl and press V to paste the results.  Copy and paste these details with your next post.

  Kind regards

  DP - K

• Pavilion p6506f: System Recovery option grayed out when you use the recovery to factory default reset disk

  Dear experts,

  Please help me on what I am making a solution for about 4 hours now...

  Somehow my recovery partition is damaged, so I use the recovery disk that I created when I bought the computer.

  I used the disc to start the computer and after loading files and everything on the menu of Recovery Manager "System Recovery" is grayed out.  Note that I have not changed any hardware on the computer.

  Help, please!

  Thank you!

  Hello

  You did do the right thing. But you created a Win 7 recovery disk, not the game of HP recovery disks.

  You can switch to Win own 10.

  You will need the product key Microsoft of the COA sticker attached to the frame of your PC of 25 characters.

  Images of example COSTS:

  

  Do a clean install of win 10 If you do not know the product key of Windows 7 on the certificate of authenticity.

  Win 7 PC sometimes have problems updating to Win 10.

  I really think you should get support from HP Win 7 recovery. If the Win 10 upgrade fails you can always return Win 7 If you have a Win 7 HP recovery media.

  Your choice.

  Jay

• HP Pavilion dv7 system recovery questions

  I tried a system recovery using the HP DVD sent to me earlier and I put the first disc in and fine, sometimes about to hundred 70ish then asking disc two, I insert the CD 2 and it carries up to 100% then it moves to "deploy the files required for the installation of recovery phase" but does not move 0%

  I tried to use the portable computers own system recovery, but it does not at all.

  Ive took records, re them, put disc back in and stillhad entered no chance.

  Any ideas on what I can do?

  Hi John,.

  You're welcome and good to hear that it's all sorted out

  All the best,

  DP - K

• I need help with a g4 pavilion operating system recovery

  Recently, I replaced the hard drive on my g4 pavilion laptop. The new hard drive doesn't do not have an operating system. I have no access to the old hard drive, but I got back up to an external memory. My question is that I'm able to use the files to restore the operating system, or do I have to order the recovery disks? OR do I have to buy the whole OS again?

  Thank you

  Alexandra

  You are the very welcome.

  First here is the link to order your laptop recovery media, where you decide to order recovery disks.

  Click on the link below and then click to expand the order recovery media line and then click on the blue button more downloads.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5148870

  Now, here's what you need to do to make your own plain version of W7 to install on your laptop by using the product key:

  Here is the link to the ISO from Microsoft W7 Home Premium 64 bit file.

  http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO 2147483647 English Windows 7 Home Premium x 64 X 17 - 58997.iso

  Make sure you get all the 3. XX GB of the file to download.  On rare occasions, it reports full download, but you do not receive the entire file.

  After you download the above file, use your option ISO burn program for burning DVDs to burn the ISO on a DVD that the DVD is bootable.

  Burn the DVD at the speed of slow burning you can.

• Pavilion a450n System Recovery

  PC came a branch, we had to close... Unable to connect to the internet... LAN & firewall connected 1394 but show protocol tcp/ip installed... need internet connection to install network cards...

  After reviewing the information in the files & folders, I decided to simply do a complete system of the partition restore (found on H , but can not access... followed the instructions that the hp online customer service... clicked on "Start", "all programs", then there is no "hp tools", etc. to access the "sys rec"... tried the key f10 at startup without success...)

  Not much of anything about this system... many removable media, malware, spyware, care sys...

  How can I get this pc to factory out-of-the-box... I like the features on this pc, but anything that moved to the factory seems to have disappeared... Help, please...

  Then I also have a Presario by another office... not as bad as this one... taking care of that one later...

  Thank you...

  Please order the recovery disc for your model to restore the system to factory of the following hyperlink:

  http://www.computersurgeons.com/

  You can use the A450N model number to find the exact recovery kit required for your model.

• Pavilion: The system recovery

  I use the HP support assistant and want to make a recovery disk. Itsays I should use a 24 GB Flash drive.

  I looked at Best Buy online and they have a 256 GB Flash drive. Is not not computer savy must I do this?

  Thank you

  Hello

  You only need a 32 GB flash drive - an example of this would be on the following link.

  http://www.BestBuy.com/site/PNY-Turbo-attache-4-32GB-USB-3-0-type-a-flash-drive-blue/4471305.p?ID=1219751163047 & skuId = 4471305

  Kind regards

  DP - K

• HP Pavilion a620n: System Recovery question

  I turned on the computer and got a black screen with an error that read the file \system32\hal.dll missing. Could not start. Did a system restore and now the computer starts but I can't load a lot of Web sites without the update to Windows XP SP3. Also got a new OdiAPI.dll error not found.  Is it possible to get the necessary system updates as Microsoft no longer supports Windows XP and my computer is not compatible with Windows 8?

  Strange, the link worked for me.

  Try this link instead:

  http://www.MajorGeeks.com/files/details/microsoft_windows_xp_service_pack_3.html

• Pavilion 23-b244 AiO: the system recovery media does not support this computer

  Hey all,.

  I had a power outage (1 TB) HD material on me about a week ago and replaced by a (500 GB) SSD, not purchased from HP.  I then ordered the recovery disc from HP for this particular serial number.  Whenever I boot on the recovery discs, I get "this computer does not support the system recovery media. You are not able to restore the system with the media. "The Minsize argument in the instructions to build on the DVD file provides a minimum of 140 GB, so I don't think I have a new smaller drive system is the question.

  Last month I have updated the firmware to v80.08, and in the bios "product name", 'SKU number', 'serial number of the chassis' fields are all empty.  In "System ID", everythign is empty except UUID and family name.

  I think that's why I'm not able to boot to recovery discs?

  Any help would be appreciated, I have use this computer for quickbooks and have bee unable to do accounting for a week and a half.

  Figured it out! On my Pavilion, you press Ctrl + A in the bios then click on 'System IDs'. Then I was able to type in the ID to build my recovery and support the byte to feature on the sticker under my machine. F10 to save then the recovery media recognized the computer properly and booted up!

• HP Pavilion system recovery partition deleted 15-e054se

  My mom bought my laptop in the last Kuwait September 2013 and she brought here in the Philippines in October. last night, while I tried to install an update of my bluetooth driver, I met an error which caused my laptop restart and restart continuously. I tried to reset my laptop via the reset option, but it has encountered an error during the process, and the following error that prompted was "boot device not found. Please install an operating system"or something... in the meantime, I started to freak out already and I thought of simply replacing the windows 8 with a windows 7. so, I went ahead and install windows 7 on my laptop. After installing successfully, I noticed that my drivers are not installed, even my wireless and wired lan... my problem is the following: during the installation of windows 7, I was asked to format ALL my partitions. long story short, the recovery of the system partition was deleted in order for me to install windows 7. When I tried to search for drivers for my hardware compatible with windows 7, I could not found. I mean, I've found a few, but they do not installed correctly. So I have 2 questions...

  1: are there drivers available in windows 7 that are compatible with the specifications of my laptop (HP Pavilion 15-e054se)? and;

  2: If there is no available drivers, what are my options if I want to return back to windows 8 if I accidentally deleted my system restore partition? I did a system recovery still disk so I don't know where to find a...

  Hello:

  Answers...

  1 Yes there is.

  You can use all the W7 x 64 drivers and software of this model except the audio.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

  Audio: Accept the agreement. Download and install the second on the list (W7 x 64)

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  2. you can no longer make a W8 recovery disk, because you deleted the recovery partition.

  If you want to reinstall W8, you can try this...

  Upload this W8 OEM ISO file from the link below.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Then use this tool to make the downloaded ISO file on a key USB 4 GB or DVD bootable.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  The W8 product key encrypted in the BIOS should fill the W8 installation and automatically activate.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• System recovery failed for a HP Pavilion p7 - 1446 s PC, Windows 8 64-bit operating system.

  My wife was using her recovery of system on its flag, when we had a power outage for about a minute. She tried to restart the computer, but we get a blue screen saying there was an error and we need a system recovery disk. Well my wife never had time to do a computer system recovery disk. I was just wondering what we can do to solve this problem. Can we get a recovery disk HP system and if so how much it will cost. She has the operating system windows 8 on it.

  The product number is H3Z36AA #ABA and serial number is {deleted personal information}.

  We checked and its HP Pavilion is still under warranty.  S thank you very much in advance.

  You can order drives recovery HP HP HERE or the third party provider ComputerSurgeons.com HERE. The disks should cost $27 or less, depending on where order you from.

  Please send BRAVO

• Recovery and system recovery disks don't work is not on the MS213 Pavilion (All in One)

  Hello

  I ordered the HP recovery discs as F11 will not work. I got 4 disks with one separated from the others. He said "use this first! The other 3 were combined, and they are marked the system recovery and disc 1 of 3, 2, 3 and so on. I restart the computer with the disk that says use this first. The disc starts to load and says loading files of Windows, or somehting like that. Then he said: Windows startup. I don't get the Recovery Manager menu. After a few seconds it ejects the disc, and there are 3 pictures on the screen, at the top left is like a circle with a check mark in it. With an arrow, it points to an ejected drive of a computer image on the disc tray. And it points to a picture of a computer with 3 drives. It seems that he tells me to put in the next disc. I put in one that is graduated from 1 to 3, the light on the drive flashes, and then nothing happens, regardless how long wait. If, instead of starting with the disk that says this first use, I start with the one who said that 1 of 3, after loading Windows files, it says something like "this disc is not for this computer.

  System information:

  HP Pavilion MS213 all-in-one

  Windows 7 64 bit

  Configuration of stock

  Background:

  It is a friend's computer. She was making a mistake "code purple" with the resumption of F11. She had someone watching and I don't know what they were doing, but when I got it, I was getting an error at startup. somehting like cannot find the Boot...

  I found a commercial version of Win 7 64 bit standalone disc and installed on the machine. It runs great, but it had to be for troubleshooting only, until I have the recovery disks.

  So, I'm stuck and would appreciate any help. I thought initially upgraded to Windows 8, but I thought that the recovery disks will be cheaper, and also the friend doesn't have to go through the inclination of windows 8.

  I will be happy to provide more information if necessary.

  If you can read the license key Microsoft Windows 7 of 25 characters related to the machine, you can download a Windows 7 ISO file to burn to a DVD. Remember, it is the version that is listed on the Microsoft COA sticker.

• HP system recovery disc for the PC HP Pavilion?

  I press a dozen HP desktop systems.  In my software collection, I found a three-disc set of HP system recovery discs that were not labeled with a hint of the association of the system.

  The discs are marked by these numbers = 5012-0414, 5012-0415 and 5012-0416.

  It would be helpful if someone can tell me which PC HP Pavilion, these discs are designed so that I can either label or throw it out.

  Thank you very much for the time and effort to help me!

  Hello:

  According to this, they go to a HP Pavilion HP 8750 C.

  http://www.com-com.co.UK/basket_enquiry.ihtml?PN=4500078 ~ add = Y ~ cs = CL_availability_link

• Pavilion new hard drive XP Media Center Edition 2005, won't boot from the system recovery disks

  Hi, I'm trying to replace the hard drive in Pavilion a1620n a member of the family with XP Media Center Edition 2005 where the original Samsung SP2504C HDD failed.  I HAVE the original recovery discs 1 and 2 system and additional recovery disk supplied with the PC but the problem seems to be that I can't get the PC to boot from them to start the recovery process.  I installed a new Western Digital 500 GB HARD drive.  The BIOS recognizes it is installed (as well as the existing DVD - RW drive) and drive past the on-board CHIP support tests.  I tried using the Boot Menu ESC to select the DVD - RW Drive as the first Boot device, as well as the tab Boot Setup of BIOS F1 to set the 1st boot CD-ROM device group and other people with disabilities.  After reboot, the drive of DVD - RW turns on for about 2 seconds, then turns off and the display shows "DISK BOOT FAILURE", INSERT SYSTEM DISK AND press ENTER.  I thought maybe I needed a kind of bootable CD boot disk to format the drive first, so I tried a BACK 6.22 bootable CD and a bootable CD of MEMTEST, that work on the other PC, but I get the same message "DISK BOOT... "on this one.  My next idea would be to try to host the new drive on another PC and copy the files on it recovery disk... but is it really necessary?  If the own PC system recovery CD should not be able to... Recover?

  It seems to me that the ligthscribe drive has a problem.  Replace the disk and it may be OK after that.  On a PC so old, it is probably an IDE drive, but check first.